A novel electrochemical aptasensor for highly sensitive detection of thrombin based on the autonomous assembly of hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme nanowires

In this work, a new signal amplified strategy was constructed based on isothermal exponential amplification reaction (EXPAR) and hybridization chain reaction (HCR) generating the hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme (HRP-mimicking DNAzyme) nanowires as signal output component for the sensitive detection of thrombin (TB). We employed EXPAR’s ultra-high amplification efficiency to produce a large amount of two hairpin helper DNAs within a minutes. And then the resultant two hairpin helper DNAs could autonomously assemble the hemin/G-quadruplex HRP-mimicking DNAzymes nanowires as the redox-active reporter units on the electrode surface via hybridization chain reaction (HCR). The hemin/G-quadruplex structures simultaneously served as electron transfer medium and electrocatalyst to amplify the signal in the presence of H₂O₂. Specifically, only when the EXPAR reaction process has occurred, the HCR could be achieved and the hemin/G-quadruplex complexes could be formed on the surface of an electrode to give a detectable signal. The proposed strategy combines the amplification power of the EXPAR, HCR, and the inherent high sensitivity of the electrochemical detection. With such design, the proposed assay showed a good linear relationship within the range of 0.1 pM–50 nM with a detection limit of 33 fM (defined as S/N = 3) for TB.     

An electrochemical biosensor based on DNA “nano-bridge” for amplified detection of exosomal microRNAs

Exosomal miRNAs, as potential biomarkers in liquid biopsy for cancer early diagnosis, have aroused widespread concern. Herein, an electrochemical biosensor based on DNA “nano-bridge” was designed and applied to detect exosomal microRNA-21 (miR-21) derived from breast cancer cells. In brief, the target miR-21 can specifically open the hairpin probe 1(HP1) labeled on the gold electrode (GE) surface through strand displacement reaction. Thus the exposed loop region of HP1 can act as an initiator sequence to activate the hybridization chain reaction (HCR) between two kinetically trapped hairpin probes: HP2 immobilized on the GE surface and biotin labeled HP3 in solution. Cascade HCR leads to the formation of DNA “nano-bridge” tethered to the GE surface with a great deal of “piers”. Upon addition of avidin-modified horseradish peroxidase (HRP), numerous HRP were bound to the formed “nano-bridge” through biotin-avidin interaction to arouse tremendous current signal. In theory, only a single miR-21 is able to trigger the continuous HCR between HP2 and HP3 until all of the HP2 are exhausted. Therefore the proposed biosensor achieved ultrahigh sensitivity toward miR-21 with the detection limit down to 168 amol/L, as well as little cross-hybridization even at the single-base-mismatched level. Successful attempts were also made in the detection of exosomal miR-21 obtained from the MCF-7 of breast cancer cell line. To our knowledge, this is the first attempt to built horizontal DNA nano-structure on the electrode surface for exosomal miRNAs detection. In a word, the high sensitivity, selectivity, low cost make the proposed method hold great potential application for early point-of-care (POC) diagnostics of cancer.     

Nucleic Acid-to-Small Molecule Converter through Amplified Hairpin DNA Circuits

Many microRNAs (miRNAs) are characteristically found in cancer cells, making miRNAs promising marker biomolecules for cancer diagnosis and therapeutics. However, it is challenging to use miRNA as a cancer signature because it is difficult to convert the nucleic acid sequence information into molecular functionality. To address this challenge, we realize nucleic acid-to-small molecule converters using hairpin DNA circuits. Harnessing a Staudinger reduction as a trigger for the conversion, we constructed hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA) circuits that respond to oncogenic miR-21. Fluorophore and dye molecules were released in response to miR-21 through the HCR, providing fluorogenic and chromogenic readouts. Selective cytotoxicity in miR-21-abundant cells was realized by the CHA to release the anticancer drug SN-38. This would be the first example of selective activation of a small-molecule prodrug triggered by oncogenic miRNA in human living cells.     

Selective In Situ Analysis of Mature microRNAs in Extracellular Vesicles Using a DNA Cage-Based Thermophoretic Assay

Mature microRNAs (miRNAs) in extracellular vesicles (EVs) are involved in different stages of cancer progression, yet it remains challenging to precisely detect mature miRNAs in EVs due to the presence of interfering RNAs (such as longer precursor miRNAs, pre-miRNAs) and the low abundance of tumor-associated miRNAs. By leveraging the size-selective ability of DNA cages and polyethylene glycol (PEG)-enhanced thermophoretic accumulation of EVs, we devised a DNA cage-based thermophoretic assay for highly sensitive, selective, and in situ detection of mature miRNAs in EVs with a low limit of detection (LoD) of 2.05 fM. Our assay can profile EV mature miRNAs directly in serum samples without the interference of pre-miRNAs and the need for ultracentrifugation. A clinical study showed that EV miR-21 or miR-155 had an overall accuracy of 90 % for discrimination between breast cancer patients and healthy donors, which outperformed conventional molecular probes detecting both mature miRNAs and pre-miRNAs. We envision that our assay can advance EV miRNA-based diagnosis of cancer.     

Ultrasensitive electrochemical detection for thrombin using hybridization chain reaction with enzyme-amplification

In this work, a new electrochemical aptasensor using hybridization chain reaction (HCR) for signal amplification was developed for highly sensitive detection of thrombin. The sandwich system of aptamer/thrombin/aptamer–primer complex was fabricated as the sensing platform. As the initiator strands, aptamer–primer complex could propagate a chain reaction of hybridization events between the two hairpin probes, and whether long nicked DNA polymers could be formed on the modified electrode. Then the biotin-labeled dsDNA polymers could introduce numerous avidin-labeled horseradish peroxidase (HRP), resulting in significantly amplified electrochemical signal through the electrocatalysis of HRP. On the basis of the enzymatic oxidization of Fe²⁺ by H₂O₂ to yield Fe³⁺, the imaging of thrombin was detected by the reduction current of Fe³⁺ with the scanning electrochemical microscopic tip. The electrochemical signals had a good linear with logarithm of thrombin concentration in the range from 1.0 fM to 100 fM, reaching a detection limit of thrombin as low as 0.04 fM. In addition, the proposed strategy exhibited excellent specificity and was successfully applied in real sample assay which demonstrated the potential application in clinical diagnostics.     

Label-free colorimetric aptasensor for sensitive detection of ochratoxin A utilizing hybridization chain reaction

The combination of high selectivity of aptamer with the peroxidase-mimicking property of DNAzyme has presented considerable opportunities for designing colorimetric aptasensor for detection of ochratoxin A (OTA). The activities of both aptamer (as biorecognition element) and DNAzyme (as signal amplification element) are blocked via base pairing in the hairpin structure. Hybridization chain reaction (HCR) between two hairpin DNAs was employed to further improve the sensitivity of this method. The presence of OTA triggers the opening of the hairpin structure and the beginning of HCR, which results in the release of many DNAzyme, and generates enhanced colorimetric signals, which is correlated to the amounts of OTA with linear range between 0.01 to 0.32 nM, and the limit of detection is 0.01 nM under optimal conditions. OTA in yellow rice wine and wheat flour samples was also detected using this method. We demonstrate that a new colorimetric method for the detection of OTA has been established, which is simple, easy to conduct, label-free, sensitive, high throughput, and cost-saving.     

Label-free and non-enzymatic detection of DNA based on hybridization chain reaction amplification and dsDNA-templated copper nanoparticles

A label-free and non-enzymatic amplification fluorescent method for detection of DNA has been developed by using hybridization chain reaction (HCR) and dsDNA-templated copper nanoparticles (CuNPs). First, the biotinylated capture DNA probes were immobilized on the streptavidin-modified beads through the interaction of biotin and streptavidin. Then, target DNA hybridized with the capture DNA probes, which formed a hybridized DNA with sticky end. The sticky end triggered the HCR process and formation of dsDNA polymers while two hairpin probes coexisted. Subsequently, the dsDNA polymers were employed as template for synthesis of CuNPs with excellent fluorescent properties, which provided a label-free, non-enzymatic signal response. Meanwhile, the fluorescence sensing depended on the target DNA triggered HCR, which render this method a high selectivity against single-base mismatch sequences. The concept and methodology developed in this work show great promise in the quantitative detection of DNA in biological and medical applications.     

Design and preparation of imprinted surface plasmon resonance (SPR) nanosensor for detection of Zn(II) ions

A novel Zn(II) ions imprinted poly (2-hydroxyethyl Methacrylate-N-methacryloyl-(L)-histidine methyl ester) poly(HEMAH) surface plasmon resonance (SPR) nanosensor were designed for detection of Zn(II) ions in aqueous solution and artificial plasma providing a low cost, rapid and reliable results compared to other techniques such as atomic absorption spectroscopy, inductively coupled plasma-mass spectrometer, X-ray fluorescence with synchrotron radiation. Zn(II) ions imprinted nanofilm on the SPR chip surface was synthesized by bulk polymerization. Characterization of Zn(II) ions imprinted nanosensor was performed by contact angle measurement, atomic force microscopy (AFM), ellipsometry and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR). Designed nanosensor was applied for selective detection of Zn(II) ions in aqueous solution within the range of 0.5–1.0?µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were calculated as 0.19 and 0.64?ng/mL, respectively. Association kinetics analysis, Scatchard, Langmuir, Freundlich, Langmuir–Freundlich, Tempkin and Dubinin-Radushkevich isotherms were analyzed to the experimental data in order to identify the adsorption behavior. The selectivity of the SPR nanosensor was examined by using competitive metal ions such as Cd(II), Cu(II), Pb(II), and Fe(II). To evaluate the imprinting effect of Zn(II) ions imprinted (MIP) and non-imprinted (NIP) nanosensor was also prepared as the control. Repeatability of the response signal was tested by four times adsorption–desorption–regeneration cycle.     

Multiplexed Immunosensing Platform Coupled to Hybridization Chain Reaction for Electrochemical Determination of MicroRNAs in Clinical Samples

There is an urgent need for development of rapid and inexpensive techniques for detection of microRNAs (miRNAs), which are potential biomarkers of various types of cancer. In this paper, we describe a multiplexed electrochemical platform for determination of three cancer‐relevant miRNAs: miR‐21, let‐7a and miR‐31. The strategy combines the use of magnetic beads (MBs) modified with a commercial antibody for the efficient capture of the heteroduplexes formed by hybridization of the target miRNA with DNA probe. Free non‐hybridized region of the DNA probe was thereafter hybridized with two biotin‐labeled auxiliary DNA probes in a process of hybridization chain reaction (HCR), resulting in a long hybrid bearing a large number of biotin molecules. Labeling of these multiple biotin units with streptavidin‐peroxidase conjugates allowed an amplification of the amperometric signal measured after capturing the modified MBs at a screen‐printed carbon electrode array of eight electrodes. The combined strategy demonstrated in a similar assay time significantly higher sensitivity than those previously described using modified MBs with the same capture antibody (without amplification by HCR) or a HCR strategy implemented on the surface of MBs, respectively. The methodology exhibits a good selectivity for discriminating single mismatches and was applied to the determination of the three target miRNAs in total RNA (RNA_t) extracted from various cancer cell lines and from cervical precancerous lesions.     

An ultrasensitive fluorescent aptasensor based on truncated aptamer and AGET ATRP for the detection of bisphenol A

Given the gigantic harmfulness of bisphenol A (BPA), a novel and ultrasensitive aptasensor, which employs the truncated BPA aptamer, click chemistry, and activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP), was developed herein for the quantitative determination of BPA. Firstly, hairpin DNAs (hairpins) with a thiol at the 5′ end and an azide group at the 3′ end were conjugated with aminated magnetic beads (MBs) through heterobifunctional cross-linkers. BPA truncated aptamer (ssDNA-A) hybridizes with its complementary single-stranded DNA (ssDNA-B) to form double-stranded DNA. In the presence of BPA, ssDNA-A specifically captures BPA, and then ssDNA-B is released. Subsequently, the ssDNA-B hybridizes with hairpins to expose the azide group near the surface of the MBs. Then, propargyl-2-bromoisobutyrate (PBIB), the initiator of AGET ATRP containing alkynyl group, was conjugated with azide group of hairpins via the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). Consequently, a large number of fluorescein-o-acrylate (FA) were introduced to the MBs through AGET ATRP, resulting in that the fluorescence intensity was increased dramatically. Obviously, the fluorescence intensity was especially sensitive to the change of BPA concentration, and this method can be used in quantitative determination of BPA. Under optimal conditions, a broad liner range from 100 fM to 100 nM and a low limit of detection (LOD) of 6.6 fM were obtained. Moreover, the method exhibits not only excellent specificity for BPA detection over BPA analogues but high anti-interference ability in real water sample detection, indicating that it has huge application prospect in food safety and environment monitoring.

     

Sensitive and selective fluorescence detection of guanosine nucleotides by nanoparticles conjugated with a naphthyridine receptor

Novel fluorescent nanosensors, based on a naphthyridine receptor, have been developed for the detection of guanosine nucleotides, and both their sensitivity and selectivity to various nucleotides were evaluated. The nanosensors were constructed from polystyrene nanoparticles functionalized by (N-(7-((3-aminophenyl)ethynyl)-1,8-naphthyridin-2-yl)acetamide) via carbodiimide ester activation. We show that this naphthyridine nanosensor binds guanosine nucleotides preferentially over adenine, cytosine, and thymidine nucleotides. Upon interaction with nucleotides, the fluorescence of the nanosensor is gradually quenched yielding Stern–Volmer constants in the range of 2.1 to 35.9 mM⁻¹. For all the studied quenchers, limits of detection (LOD) and tolerance levels for the nanosensors were also determined. The lowest (3σ) LOD was found for guanosine 3’,5’-cyclic monophosphate (cGMP) and it was as low as 150 ng/ml. In addition, we demonstrated that the spatial arrangement of bound analytes on the nanosensors’ surfaces is what is responsible for their selectivity to different guanosine nucleotides. We found a correlation between the changes of the fluorescence signal and the number of phosphate groups of a nucleotide. Results of molecular modeling and ζ-potential measurements confirm that the arrangement of analytes on the surface provides for the selectivity of the nanosensors. These fluorescent nanosensors have the potential to be applied in multi-analyte, array-based detection platforms, as well as in multiplexed microfluidic systems.     

Solution-phase detection of dual microRNA biomarkers in serum

A strategy for the simultaneous detection of multiple microRNA (miRNA) targets was developed utilizing fluorophore/quencher-labeled oligonucleotide probe sets. Two miRNA targets (miR-155 and miR-103), whose misregulation has afforded them status as putative biomarkers in certain types of cancer, were detected using our assay design. In the absence of target, the complementary fluorophore-probe and quencher-probe hybridize, resulting in a fluorescence resonance energy transfer-based quenching of the fluorescence signal. In the presence of unlabeled target, however, the antisense quencher-probe can hybridize with the target, resulting in increased fluorescence intensity as the quencher-probe is sequestered beyond the Förster radius of the fluorescent-probe. The assay design was tested in multiple matrices of buffer, cellular extract, and serum; and detection limits were found to be matrix-dependent, ranging from 0.34 to 8.89 pmol (3.4–59.3 nM) for miR-155 and 2.90–11.8 pmol (19.3–79.0 nM) for miR-103. Single, double, and triple nucleotide selectivity was also tested. Additionally, miR-155 concentrations were assessed in serum samples obtained directly from breast cancer patients without the need for RNA extraction. This assay is quantitative, possesses a low detection limit, can be applied in multiple complex matrices, and can obtain single-nucleotide selectivity. This method can be employed for the multiplex detection of solution-phase DNA or RNA targets and, more specifically, for the direct detection of serum miRNA biomarkers.     

Hybridization chain reaction-based aptameric system for the highly selective and sensitive detection of protein

We introduce here a novel assay for the detection of platelet-derived growth factor BB (PDGF-BB) via hybridization chain reaction (HCR) based on an aptameric system, where stable DNA monomers assemble only upon exposure to a target PDGF-BB aptamer. In this process, two complementary stable species of biotinylated DNA hairpins coexist in solution until the introduction of initiator aptamer strands triggers a cascade of hybridization events that yields nicked double helices analogous to alternating copolymers. In detail, the aptamer firstly opens the hairpins in the solution, creating long concatemers, and then reacts with the antibody captured PDGF-BB on the well surface. Moreover, several experimental conditions including different PDGF-BB aptamers, the spacer length of the selected aptamer and hairpin, etc. are investigated and optimized. Our results show that the coupling of HCR to aptamer triggers for the amplification detection of PDGF-BB achieves a better performance in the fluorescence detection of PDGF-BB as compared to the traditional antibody-antigen-aptamer assays. Upon modification, the approach presented herein could be extended to detect other types of targets. We believe such advancements will represent a significant step towards improved diagnostics and more personalized medical treatment and environmental monitoring.     

“发夹”结构DNA用于生物分析传感器研究进展

由于链内碱基互补配对作用形成的"发夹"结构DNA分子被广泛用于生物分子传感分析。双链或多链"发夹"结构DNA分子参与的杂交链式反应信号记录方式多样,主要有荧光法、比色法、电化学方法等。基于杂交链式反应的检测方法具有快速、方便、成本低、准确度高、灵敏度高、特异性强的优点,在分析传感研究中的应用尤其受到人们的关注,近些年发展迅速。本文综述了"发夹"结构DNA与杂交链式反应应用于生物传感分析的原理、信号记录方式及其在蛋白质、重金属离子、小分子、疾病标志物、DNA等检测中的研究进展。     

An easily-automated assay for the physiological state quantification of Pseudomonas sp. M18

In order to foreknow poorly performing cultures before wasting energy to scale them to large cultures, industrial microbial fermentation can greatly benefit from knowledge of the physiological state of cells. The method currently proposed is an easily automated physiological state determination method. We have designed one universal rRNA-specific probe for bacteria and developed novel signal probe hybridization (SPH) assay featuring no RNA extraction and no PCR amplification steps necessary to quantify the physiological state of microbial cells. The microbial cell was lysed with sonication and SDS. Signal probes were applied to hybridize and protect the rRNA target. S1 nuclease was then applied to remove the excessive signal probes, the single-stranded RNA and the mismatch RNA/DNA hybrids. The remaining signal probe was captured with a corresponding capture probe immobilized on a microplate and quantified with a horseradish peroxidase-conjugated color reaction. We then systemically optimized our assay. Results showed that the cell limit of detection (LOD) and the cell limit of quantification (LOQ) were 2.64 × 10⁴ cells and 9.86 × 10⁴ cells per well of microplate, respectively. The limit of detection (LOD) and the limit of quantification (LOQ) of signal probe were 49.0 fM and 344.0 fM respectively. Using this technique, we quantified the 16S rRNA levels during the fermentation process of Pseudomonas sp. M18. Our results indicate that the 16S rRNA levels can directly inform us about the physiological state of microbial cells. This technique has great potential for application to the microbial fermentation industry.     

Formation and Structure of Fluorescent Silver Nanoclusters at Interfacial Binding Sites Facilitating Oligomerization of DNA Hairpins

Fluorescent, DNA‐stabilized silver nanoclusters (DNA‐AgNCs) are applied in a range of applications within nanoscience and nanotechnology. However, their diverse optical properties, mechanism of formation, and aspects of their composition remain unexplored, making the rational design of nanocluster probes challenging. Herein, a synthetic procedure is described for obtaining a high yield of emissive DNA‐AgNCs with a C‐loop hairpin DNA sequence, with subsequent purification by size‐exclusion chromatography (SEC). Through a combination of optical spectroscopy, gel electrophoresis, inductively coupled plasma mass spectrometry (ICP‐MS), and small‐angle X‐ray scattering (SAXS) in conjunction with the systematic study of various DNA sequences, the low‐resolution structure and mechanism of the formation of AgNCs were investigated. Data indicate that fluorescent DNA‐AgNCs self‐assemble by a head‐to‐head binding of two DNA hairpins, bridged by a silver nanocluster, resulting in the modelling of a dimeric structure harboring an Ag₁₂ cluster.     

Two-dimensional coordination polymer-based nanosensor for sensitive and reliable nucleic acids detection in living cells

A reliable and sensitive strategy which can assess nucleic acid levels in living cells would be essential for fundamental research of biomedical applications. Some nanomaterial-based fluorescence biosensors recently developed for detecting nucleic acids, however, are often with expensive, complicated and timeconsuming preparation process. Here, by using a facile bottom-up synthesis method, a two-dimensional(2 D) coordination polymer(CP) nanosheet, [Cu(tz)](Htz = 1,2,4-triazole), was successfully...     

银纳米簇荧光探针检测L-半胱氨酸

常温下合成了二氢硫辛酸(DHLA)包裹的银纳米簇(AgNCs),并基于L-半胱氨酸对AgNCs的荧光猝灭现象构建了AgNCs荧光探针对Cys的检测方法。结果表明,在优化条件下,AgNCs的荧光猝灭程度和Cys浓度在2.0~100μmol/L范围内呈现良好的线性关系(R2=0.998),检出限为1.77μmol/L(S/N=3)。在人体血清样品中Cys检测的加标回收率为94.0%~102.4%。     

Tracking Cancer Metastasis In Vivo by Using an Iridium‐Based Hypoxia‐Activated Optical Oxygen Nanosensor

We have developed a nanosensor for tracking cancer metastasis by noninvasive real‐time whole‐body optical imaging. The nanosensor is prepared by the formation of co‐micelles from a poly(N‐vinylpyrrolidone)‐conjugated iridium(III) complex (Ir‐PVP) and poly(ε‐caprolactone)‐b‐poly(N‐vinylpyrrolidone) (PCL‐PVP). The near‐infrared phosphorescence emission of the nanosensor could be selectively activated in the hypoxic microenvironment induced by cancer cells. The detection ability of the nanosensor was examined in cells and different animal models. After intravenous injection, the nanosensor can be effectively delivered to the lung and lymph node, and cancer cell metastasis through bloodstream or lymphatics can be quickly detected with high signal‐to‐background ratio by whole‐body imaging and organ imaging. Moreover, the nanosensor exhibits good biocompatibility both in vitro and in vivo. The nanosensor is believed to be a powerful tool for the diagnosis of cancer metastasis.