Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Poly[tetraamminecopper(II) bis[tris(μ2‐cyanido‐κ2C,N)dicuprate(I)]]: a unique CuI–CuII mixed‐valence complex containing anionic cuprous cyanide layers and [Cu(NH3)4]2+ cations

The title compound, {[Cu(NH₃)₄][Cu(CN)₃]₂}_n, features a Cu^I–Cu^II mixed‐valence CuCN framework based on {[Cu₂(CN)₃]⁻}_n anionic layers and [Cu(NH₃)₄]²⁺ cations. The asymmetric unit contains two different Cu^I ions and one Cu^II ion which lies on a centre of inversion. Each Cu^I ion is coordinated to three cyanide ligands with a distorted trigonal–planar geometry, while the Cu^II ion is ligated by four ammine ligands, with a distorted square‐planar coordination geometry. The interlinkage between Cu^I ions and cyanide bridges produces a honeycomb‐like {[Cu₂(CN)₃]⁻}_n anionic layer containing 18‐membered planar [Cu(CN)]₆ metallocycles. A [Cu(NH₃)₄]²⁺ cation fills each metallocyclic cavity within pairs of exactly superimposed {[Cu₂(CN)₃]⁻}_n anionic layers, but there are no cations between the layers of adjacent pairs, which are offset. Pairs of N—H...N hydrogen‐bonding interactions link the N—H groups of the ammine ligands to the N atoms of cyanide ligands.     

Effects of cis/trans-Configuration and Ligand Substitution of the Cyanidometal Bridge on Metal to Metal Charge Transfer Properties in Mixed Valence Complexes

To investigate the effects of cis/trans-configuration of the cyanidometal bridge and the electron donating ability of the auxiliary ligand on the cyanidometal bridge on metal to metal charge transfer (MMCT) in cyanidometal-bridged mixed valence compounds, two groups of trinuclear cyanidometal-bridged compounds cis/trans-[Cp(dppe)Fe(μ-NC)Ru(4,4’-dmbpy)₂(μ-CN)Fe(dppe)Cp][PF₆]_n (n=2 ( cis/trans - 1[PF₆]₂ ), 3 ( cis/trans - 1[PF₆]₃ ), 4 ( cis/trans - 1[PF₆]₄ )) and cis/trans-[Cp(dppe)Fe(μ-NC)Ru(bpy)₂(μ-CN)Fe(dppe)Cp][PF₆]₃ ( cis/trans - 2[PF₆]₃ ) were synthesized and fully characterized. The experimental results indicate that for these one- and two-electron oxidation mixed valence compounds, the trans-configuration compounds are more beneficial for MMCT than the cis-configuration compounds, and increasing the electron donating ability of the auxiliary ligand on the cyanidometal bridge is also conductive to MMCT. Moreover, compounds cis/trans - 1[PF₆]_n (n=3, 4) and cis/trans - 2[PF₆]₃ belong to localized compounds by analyzing the experimental characterization results, supported by the TDDFT calculations.     

Structure and catalytic activity of host–guest coordination polymers constructed from copper(I) cyanide nets and 1,4-diaminobutane or 1,5-diaminopentane in the presence of water

The reaction of K₃[Cu(CN)₄] and 1,4-diaminobutane (DAB) or 1,5-diaminopentane (DAP) in the presence of Me₃SnCl affords two monometallic host–guest Cu(I) cyanide polymers: {[H₂DAB][Cu₄(CN)₆]·2H₂O}, 1, and{[H₂DAP][H₃O][Cu₄(CN)₇]·2H₂O}, 2, with exclusion of Me₃Sn⁺ cation. The products were characterized by physicochemical and spectroscopic methods. The structure of 1 consists of two-dimensional hexagonal sheets of (CuCN) _n which stack along the b-axis creating honeycomb-shaped channels capable of encapsulating the protonated DAB and water molecules. The structure of 2 consists of a three-dimensional network of [Cu₄(CN)₇] with large cavities that include H₂DAP and water molecules. The rhombic minicycle [Cu₂(μ-CN)₂] fragments represent the basic building blocks of the network structure of 2. The structures of these compounds are stabilized by hydrogen bonding. The SCP 1 and SCP 2 exhibit good catalytic and photocatalytic activities for the degradation of methylene blue (MB) in the presence of H₂O₂. The efficiency of recycled SCP 1 and SCP 2 and the mechanism of degradation of MB dye were also investigated.     

Bis­(tetra­phenyl­phospho­nium) (μ‐tetra­thio­tungstenio‐κ4S,S′:S′′:S′′′)­bis­[(cyano‐κC)­cuprate](2–) aceto­nitrile solvate monohydrate

The reaction of CuCN and KCN with (NH₄)₂[WS₄] followed by cation exchange with PPh₄Br produced the title compound, (C₂₄H₂₀P)₂[Cu₂WS₄(CN)₂]·CH₃CN·H₂O or (PPh₄)₂[(NC)Cu(μ‐S)₂W(μ‐S)₂Cu(CN)]·MeCN·H₂O. In the structure of the dianion, [(NC)Cu(μ‐S)₂W(μ‐S)₂Cu(CN)]²⁻, the WS₄ moiety acts as a bidentate ligand that binds two CuCN groups, thus forming a slightly bent WCu₂ core with approximate D_2d symmetry. The W—Cu distances are in the range 2.6463 (6)–2.6545 (6) Å.     

Ribbon and Self‐Penetrated Hybrid Copper Molybdates with Ancillary Bis(4‐pyridylmethyl)piperazine Ligands

Hybrid copper molybdates containing the long‐spanning bis(4‐pyridylmethyl) piperazine (bpmp) ligand were prepared via hydrothermal synthesis and structurally characterized by single‐crystal X‐ray diffraction. The reduced copper phase and major product [Cu₄(MoO₄)₂(bpmp)₄]_n ( 1 ) shows 1D ribbon motifs with embedded {Cu^I₂O₂} dimeric units, built from the bpmp pillaring of [Cu₄(MoO₄)₂] linear clusters. The oxidized copper phase and minor product {[Cu₂(MoO₄)₂(bpmp)₄] · 24H₂O}_n ( 2 ) displays [Cu(bpmp)₂]_n²ⁿ⁺ mutually inclined interpenetrated cationic layers cross‐pillared by molybdate tetrahedra into an unprecedented 6‐connected self‐penetrated network with 4⁸5²6⁵ topology.     

Hydrothermal synthesis and characterization of LaIII and CuII coordination polymers with 5-nitroisophthalic acid (H2Nip), [La2(μ-Nip)(μ-SO4)2(H2O)5] n and {[Cu3(μ-OH)2(μ-Nip)2(μ-H2O)2] · 2H2O} n

3D La^III and 2D Cu^II coordination polymers with 5-nitroisophthalate anions, [La₂(μ-Nip)(μ-SO₄)₂(H₂O)₅] _n (1) and {[Cu₃(μ-OH)₂(μ-Nip)₂(μ-H₂O)₂] ·?2H₂O} _n (2), have been synthesized, characterized and studied by X-ray crystallography. The La atoms have eight–coordinate geometries in distorted square antiprism environments and the Cu atoms have five- and six–coordinate geometries with distorted square pyramidal and octahedral environments. Self-assembly of these compounds in the solid state occurs through coordination and hydrogen bonding.     

Syntheses,structures, and magnetic properties of dinuclear/1-D copper(II) acetato and formato derivatives with methylpyrazine and dimethylpyrazine

In this study, {[Cu₂(µ-HCO₂)₄](µ-Mepyrz)} _n (1), [Cu₂(µ-HCO₂)₄(Mepyrz)₂] (2), {[Cu₂(µ-AcO)₄](µ-Mepyrz)} _n (3), [Cu₂(µ-AcO)₄(Mepyrz)₂] (4), [Cu₂(µ-AcO)₄(2,3-Me₂pyrz)₂] (5), [Cu₂(µ-AcO)₄(2,6-Me₂pyrz)₂] (6), and {[Cu₂(µ-AcO)₄](µ-2,5-Me₂pyrz)} _n (7) have been synthesized and characterized by chemical analysis and electronic spectroscopy. Compounds 2, 4, 5, and 6, characterized by single-crystal X-ray diffraction, are composed of molecular dimers based on a paddle-wheel motif with two coppers, four syn–syn carboxylates, and two ligands coordinated to copper in the axial positions. In 7, chains of [Cu₂(µ-AcO)₄] dimers with 2,5-Me₂pyrz as bridging ligands are formed. Magnetic properties and electron paramagnetic resonance results of the compounds are also described.     

Syntheses,Structures and Properties of Four Manganese Coordination Polymers Derived from 4-Amino-3,5-bis(imidazol-1-ylmethyl)-1,2,4-triazole

The reaction of 4‐amino‐3,5‐bis(imidazol‐1‐ylmethyl)‐1,2,4‐triazole (abit) and manganese(II) salts yields four coordination polymers {[Mn(abit)₃](ClO₄)₂}_n ( 1 ), {[Mn(abit)₃](PF₆)₂}_n ( 2 ), [Mn(abit)(dca)₂(H₂O)₂]_n ( 3a ) and [Mn(abit)(dca)₂(H₂O)₂]_n ( 3b ). Compounds 1 and 2 are one‐dimensional triple‐stranded chain. Compounds 3a and 3b are polymorphous and construct one‐dimensional single chain. The conformational analysis is performed. The thermal properties have been investigated.     

Novel copper complexes based on the thiocyanate bridge - Synthesis, X-ray studies and magnetic properties

Three novel compounds {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a), {[Cu₂(bpzm)₂(μ-SCN)(SCN)₃]}_n (1b) and [Cu₂(μ-SCN)₂(SCN)₂(dpa)₂] (2) have been obtained in one-step self-assembly reaction of copper dichloride, a suitable N-N ligand (bis(pyrazol-1-yl)methane and 2,2′-dipyridylamine) and ammonium thiocyanate. For the reaction involving bis(pyrazol-1-yl)methane, an unprecedented in situ reduction of some Cu(II) ions to Cu(I) has been observed. The compound {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a) belongs to a relatively scarce group of mixed-valence Cu^II/Cu^I coordination polymers with interesting polymeric architecture. It creates infinite two-dimensional structure consisting of layers extending along crystallographic plane (0 0 1), in which the cations [Cu^II(bpzm)(SCN)]⁺ and [Cu^II(bpzm)(MeOH)]²⁺ are connected by ions [Cu^I(SCN)₄]³⁻ through single end-to-end thiocyanato bridges. Structure 1b consists two crystallographically independent chains. The chain A has a zig-zag form and extends along the crystallographic direction [0 0 1], whereas the second chain is linear and runs along the crystallographic direction [0 1 0]. The structure 2 consists of dinuclear [Cu₂(dpa)₂(μ-SCN)₂(SCN)₂] units. Variable-temperature magnetic susceptibility measurements show very weak antiferromagnetic interactions between the paramagnetic centres Cu(II) centers inside the crystal lattices of three novel compounds.     

Syntheses,structures and fluorescent properties of three copper cyanide coordination polymers based on N-heterocyclic ligands

Hydrothermal reactions of CuCN, K₃[Fe(CN)₆] with 2,2′-bipyridine, 1,10-phenanthroline or 2,6-bis(1,2,4-triazolyl)pyridine (btp) afford three coordination polymers, [Cu₇(CN)₇(bipy)₂] _n (1), [Cu₂(CN)₂(phen)] _n (2) and [Cu₃(CN)₃(btp)] _n (3). Complex 1 displays 1D polymeric ribbons which are assembled through Cu ··· Cu and π–π stacking interactions into a 3D framework. Complex 2 shows a 1D zigzag chain structure in which phen is a side ligand. In 3, the copper cyanide 2D polymeric networks are connected by tridentate btp to form a 3D metal-organic framework. These coordination polymers exhibit strong fluorescent emissions in the solid state.     

Diamond‐ and Graphite‐Like Octacyanometalate‐Based Polymers Induced by Metal Ions

By using cyclohexane‐1,2‐diamine (chxn), Ni(ClO₄)₂ ? 6H₂O and Na₃[Mo(CN)₈] ? 4H₂O, a 3D diamond‐like polymer {[Ni^II(chxn)₂]₂[Mo^IV(CN)₈] ? 8H₂O}_n ( 1 ) was synthesised, whereas the reaction of chxn and Cu(ClO₄)₂ ? 6H₂O with Na₃[M^V(CN)₈] ? 4H₂O (M=Mo, W) afforded two isomorphous graphite‐like complexes {[Cu^II(chxn)₂]₃[Mo^V(CN)₈]₂ ? 2H₂O}_n ( 2 ) and {[Cu^II(chxn)₂]₃[W^V(CN)₈]₂ ? 2H₂O}_n ( 3 ). When the same synthetic procedure was employed, but replacing Na₃[Mo(CN)₈] ? 4H₂O by (Bu₃NH)₃[Mo(CN)₈] ? 4H₂O (Bu₃N=tributylamine), {[Cu^II(chxn)₂Mo^IV(CN)₈][Cu^II(chxn)₂] ? 2H₂O}_n ( 4 ) was obtained. Single‐crystal X‐ray diffraction analyses showed that the framework of 4 is similar to 2 and 3 , except that a discrete [Cu(chxn)₂]²⁺ moiety in 4 possesses large channels of parallel adjacent layers. The experimental results showed that in this system, the diamond‐ or graphite‐like framework was strongly influenced by the inducement of metal ions. The magnetic properties illustrate that the diamagnetic [Mo^IV(CN)₈] bridges mediate very weak antiferromagnetic coupling between the Ni^II ions in 1 , but lead to the paramagnetic behaviour in 4 because [Mo^IV(CN)₈] weakly coordinates to the Cu^II ions. The magnetic investigations of 2 and 3 indicate the presence of ferromagnetic coupling between the Cu^II and W^V/Mo^V ions, and the more diffuse 5d orbitals lead to a stronger magnetic coupling interaction between the W^V and Cu^II ions than between the Mo^V and Cu^II ions.     

Synthesis and characterization of 2CuCN·DMSO and [CuII(DMSO)6][CuI 6(CN)8] 3-D framework compounds

Two novel complexes of CuCN were characterized by using a single-crystal X-ray diffraction technique and Raman spectroscopy. In the structure of 2CuCN·DMSO ligand molecule demonstrates unique bridging mode, being bound to two Cu^I centers via oxygen and sulfur atoms. The bridging role of both CN groups and DMSO molecules results in the formation of (CuCN·DMSO)_n framework. Along the channels of the network are running infinite zig-zag (CuCN)_n chains, which are bound to the framework by elongated Cu…(CN) bonds. A mixed-valence [Cu^II(DMSO)₆][Cu^I ₆(CN)₈] compound is composed of 3-D [Cu^I ₆(CN)₈]_n anionic framework and located in the channels of partially disordered [Cu^II(DMSO)₆]²⁺ cations.     

Electronic,bonding, and optical properties of 1d [CuCN]n (n = 1–10) chains, 2d [CuCN]n (n = 2–10) nanorings,and 3d [Cun(CN)n]m (n = 4, m = 2, 3; n = 10, m = 2) tubes studied by DFT/TD‐DFT methods

The electronic, bonding, and photophysical properties of one‐dimensional [CuCN]_n (n = 1–10) chains, 2‐D [CuCN]_n (n = 2–10) nanorings, and 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes are investigated by means of a multitude of computational methodologies using density functional theory (DFT) and time‐dependent‐density‐functional theory (TD‐DFT) methods. The calculations revealed that the 2‐D [CuCN]_n (n = 2–10) nanorings are more stable than the respective 1‐D [CuCN]_n (n = 2–10) linear chains. The 2‐D [CuCN]_n (n = 2–10) nanorings are predicted to form 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes supported by weak stacking interactions, which are clearly visualized as broad regions in real space by the 3D plots of the reduced density gradient. The bonding mechanism in the 1‐D [CuCN]_n (n = 1–10) chains, 2‐D [CuCN]_n (n = 2–10) nanorings, and 3‐D [Cu_n(CN)_n]_m (n = 4, m = 2, 3; n = 10, m = 2) tubes are easily recognized by a multitude of electronic structure calculation approaches. Particular emphasis was given on the photophysical properties (absorption and emission spectra) of the [CuCN]_n chains, nanorings, and tubes which were simulated by TD‐DFT calculations. The absorption and emission bands in the simulated TD‐DFT absorption and emission spectra have thoroughly been analyzed and assignments of the contributing principal electronic transitions associated to individual excitations have been made. © 2015 Wiley Periodicals, Inc.     

Synthesis and Structural Characterization of Six Pentanuclear and Tetranuclear Mo/W‐Cu‐S Clusters with Bis(diphenylphosphanyl) Methane

Six heterothiometalic clusters, namely, [WS₄Cu₄(dppm)₄](ClO₄)₂ · 2DMF · MeCN ( 1 ), [MoS₄Cu₄(dppm)₄](NO₃)₂ · MeCN ( 2 ) [MoS₄Cu₃(dppm)₃](ClO₄) · 4H₂O ( 3 ), [WS₄Cu₃(dppm)₃](NO₃) · 4H₂O ( 4 ), [WS₄Cu₃(dppm)₃]SCN · CH₂Cl₂ ( 5 ), and [WS₄Cu₃(dppm)₃]I · CH₂Cl₂ ( 6 ) [dppm = bis (diphenylphosphanyl)methane] were synthesized. Compounds 1 – 4 were obtained by the reactions of (NH₄)₂MS₄ (M = Mo, W) with [Cu₂(μ₂‐dppm)₂(MeCN)₂(ClO₄)₂] {or [Cu(dppm)(NO₃)]₂} in the presence of 1,10‐phen in mixed solvent (CH₃CN/CH₂Cl₂/DMF for 1 and 2 , CH₂Cl₂/CH₃OH/DMF for 3 and 4 . Compounds 5 and 6 were obtained by one‐pot reactions of (NH₄)₂WS₄ with dppm and CuSCN (or CuI) in CH₂Cl₂/CH₃OH. These clusters were characterized by single‐crystal X‐ray diffraction as well as IR, ¹H NMR, and ³¹P NMR spectroscopy. Structure analysis showed that compounds 1 and 2 are “saddle‐shaped” pentanuclear cationic clusters, whereas compounds 3 – 6 are “flywheel‐shaped” tetranuclear cationic clusters. In 1 and 2 , the MS₄^2– unit (M = W, Mo) is coordinated by four copper atoms, which are further bridged by four dppm molecules. In compounds 3 – 6 , the MS₄^2– unit is coordinated by three copper atoms and each copper atom is bridged by three dppm ligands.     

Tetranuclear cluster-based coordination polymer templated by [Ca(H2O)6]2+ cations for the photocatalytic application

A new [Ca(H₂O)₆]²⁺ cations-templated coordination polymer, namely {[Ca(H₂O)₆][Cu₄(btec)₂(μ₃-OH)₂]}_n ( 1 , H₄btec=1,2,4,5-benzenetetracarboxylic acid), has been prepared via the solvothermal reactions of CuCl₂ ? 2H₂O, CaCl₂, and H₄btec. X-ray structural analysis revealed that it features a tetranuclear [Cu₄(COO)₆(μ₃-OH)₂] cluster-based 3D anionic framework with (4,8)-connected scu topology that was further balanced by the isolated [Ca(H₂O)₆]²⁺ cations. The framework of 1 shows high thermostability under air atmosphere. Moreover, such compound shows high photocatalytic activity for the degradation of methyl blue (MB) with the degradation efficiency of 94.5 %, and the possible photocatalytic mechanism was also clarified.     

Structures and Properties of Three Solvent‐Dependent Chiral Compounds Based on N‐Benzoyl‐L‐glutamic Acid

Three solvent‐dependent chiral copper(II) compounds, {[Cu₂(bzgluO)₂(H₂O)₂]·4H₂O}_n ( 1 ), {[Cu₂(bzgluO)₂(DMSO)₂]·H₂O}_n ( 2 ) and [Cu₂(bzgluO)₂(DMF)₂]_n ( 3 ) (H₂bzgluO=N‐benzoyl‐L‐glutamic acid) have been synthesized under ambient temperature conditions and characterized by elemental analysis, IR spectra, UV spectra, thermogravimetric analysis, powder X‐ray diffraction (PXRD) and single‐crystal X‐ray diffraction. Compounds 1 and 2 both crystallize in the orthorhombic space group P2₁2₁2₁. Compound 3 crystallizes in the tetragonal space group P4₃. Compound 1 exhibits a ladder‐like 1D chain structure, which is extended by hydrogen‐bonding interactions to form a 3D supramolecular network. Compounds 2 and 3 both give a diamond‐like 3D structure. Besides, there are hydrogen‐bonding interactions in 2 . The structural difference indicates that the solvent system plays a crucial role in modulating structures of coordination compounds. Circular dichroism (CD) and the magnetic properties of the compounds have also been investigated.     

Construction of Four Coordination Polymers based on 2‐[4‐(Pyridine‐4‐yl)phenyl]‐1H‐imidazole‐4,5‐dicarboxylic Acid

The imidazole‐based dicarboxylate ligand 2‐(4‐(pyridin‐4‐yl)phenyl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PyPhIDC), was synthesized and its coordination chemistry was studied. Solvothermal reactions of Ca^II, Mn^II, Co^II, and Ni^II ions with H₃PyPhIDC produced four coordination polymers, [Ca(μ₃‐HPyPhIDC)(H₂O)₂]_n ( 1 ), {[M₃(μ₂‐H₂PyPhIDC)₂(μ₃‐HPyPhIDC)₂₆(H₂O)₂] · 6H₂O}_n [M = Mn ( 2 ), Co ( 3 )], and {[Ni(μ₃‐HPyPhIDC)(H₂O)] · H₂O}_n ( 4 ). Compounds 1 – 4 were analyzed by IR spectroscopy, elemental analyses, and single‐crystal and powder X‐ray diffraction. Compound 1 displays a one‐dimensional (1D) infinite chain. Compounds 2 and 3 are of similar structure, showing 2D network structures with a (4,4) topology based on trinuclear clusters. Compound 4 has another type of 2D network structure with a 3‐connected (4.8²) topology. The results revealed that the structural diversity is attributed to the coordination numbers and geometries of metal ions as well as the coordination modes and conformations of H₃PyPhIDC. Moreover, the thermogravimetric analyses of all the compounds as well as luminescence properties of the H₃PyPhIDC ligand and compound 1 were also studied.     

Frameworks Tuned by Different Anions via Charge‐Assisted Weak Hydrogen Bonds

Reactions of Co(ClO₄)₂·6H₂O, Cu(NO₃)₂·3H₂O with 4,4′‐dipyridylsulfide (dps) give rise to coordination polymers {[Co(dps)₂(DMF)₂]·2(ClO₄)·2dps}_n ( 1 ) and {[Cu(dps)₂(DMF)(H₂O)]·(PF₆)·(NO₃)}_n ( 2 ) (DMF = formydimethylamine), respectively. X‐ray diffraction analyses reveal that compound 1 has a one dimensional (1D) chain structure, whereas compound 2 is built of the non‐interpenetrating wave‐like (4, 4) nets. Close inspection of the abundant charge‐assisted weak hydrogen bonds (C‐H···X, X = O, F) between the anions and frameworks in these compounds reveals that the appearance of anion may have a subtle effect on the framework topology. Furthermore, quite few examples of framework holding two different anions only via weak effects as 2 were observed in coordination polymers.     

The synthesis,characterization, and theoretical hydrogen gas adsorption properties of copper(II)-3,3′-thiodipropionate complexes with imidazole derivatives

Three new coordination polymers, [Cu(μ₃-tdp)(im)₂]_n (1), {[Cu(μ₃-tdp)(1-mim)₂]·0.5H₂O}_n (2) and {[Cu₂(μ₃-tdp)₂(4-mim)₄]·H₂O}_n (3) [tdpH₂ = 3,3′-thiodipropionic acid, im = imidazole, 1-mim = 1-methylimidazole and 4-mim = 4-methylimidazole], have been prepared and characterized by spectroscopic techniques (IR and UV–Vis), elemental analyzes, magnetic measurements, thermal analyzes, and single-crystal X-ray diffraction. Complexes 1–3 crystallize in the monoclinic system with space groups of C2/c and P2₁/c, respectively. In 1–3, tdp is a bridging ligand to form 1-D chains, which are extended into a 2-D layer by hydrogen bonding and π···π interactions. The 3,3′-thiodipropionate exhibits an unexpected coordination mode in 1–3. Simulations were used to assess the potential of the complexes in H₂ storage applications.