Synthesis,characterization and antimicrobial activity of maltol functionalized chitosan derivatives

Chitin was isolated from prawn shell powder through demineralization and deproteinization process. Chitosan was synthesized from isolated chitin by deacetylation process and characterized by Fourier Transform Infrared (FTIR) spectra which showed close agreement with commercial chitosan. Physicochemical features such as moisture content, ash content, degree of deacetylation and molecular weight has been measured. The prepared chitosan was found to have comparatively higher molecular weight than the commercial chitosan. Functionalization of NH₂ group of chitosan with C?=?O group of maltol and ethyl maltol by refluxing equimolar quantities of respective ketones was performed. These synthesized derivatives of chitosan were characterized by their FTIR, ¹³C-Nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, X-Ray Diffraction (XRD), Thermogravimetric analysis (TGA) and Differential thermal analysis (DTA) instrumental techniques. Antibacterial screening results of the synthesized chitosan and its derivatives indicate that these compounds are active against Escherichia coli bacteria.     

Effect of molecular weight and degree of deacetylation on controlled release of isoniazid from chitosan microspheres

Glutaraldehyde cross‐linked chitosan microspheres for controlled release of isoniazid were prepared using chitosan of different molecular weights (MWs) and degrees of deacetylation (DDAs). Chitosan microspheres were characterized for their size, hydrophobocity, degree of swelling and loading of isoniazid. Hydrophobicity of chitosan microspheres increased on increasing the degree of cross‐linking and MW of chitosan. Chitosan microspheres with high degree of deacetylation (DDA) (75 wt%), high MW chitosan (2227 kg mol^?1), and with 12 wt% concentration of glutaraldehyde showed optimum loading and release of isoniazid. The isoniazid from chitosan microspheres was released in two steps, i.e. burst (%R_B) and controlled (%R_C) steps. The microspheres with low MW chitosan (260 kg mol^?1) and low DDA (48 wt%) showed prominent burst release of isoniazid, but microspheres with high MW chitosan (2227 kg mol^?1) and high DDA (75 wt%) have released more isoniazid in a controlled manner (60 wt%) at 37°C in a solution of pH 5.0 ± 0.1. The burst step of drug release (%R_B) has followed first order kinetics, whereas controlled step of drug release (%R_C) followed zero order kinetics. The burst step of drug release was Fickian and controlled step was non‐Fickian in nature. The diffusion constant (D) for isoniazid release was influenced by the properties of chitosan and degree of cross‐linking. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation,Characterization and Luminescence Study of Chitosan Membrane and Powder Forms with Eu3 + and Tb3 +

Chitosan membranes with trivalent lanthanide ion Eu^{3 +} were prepared at a ratio of 3:1 w/w (chitosan:lanthanide). There was no membrane formation at a ratio of 1:1 w/w (chitosan: Eu^{3 +} or Tb^{3 +}); in this case a white solid powder was obtained. Both chitosan compounds were characterized by elemental analysis (CHN), thermal analysis (TG/DTG), scanning electron microscopy (SEM) and luminescence spectroscopy. CHN analysis was performed only for chitosan compounds in powder form, suggesting that these compounds have the general formula QUILn.6H₂O, where QUI = Chitosan and Ln = Eu^{3 +} or Tb^{3 +}. The results of TG/DTG curves for chitosan membranes with Eu^{3 +} ion indicate that the introduction of this metal into the chitosan structure causes gradual degradation in residual carbons, showing lower weight loss in the Eu^{3 +} membranes compared to pure chitosan membrane. Analysis of luminescence demonstrated that chitosan membranes with Eu^{3 +} ion exhibit emission in the visible region, showing emission bands from chitosan and Eu^{3 +} moieties. For chitosan with Eu^{3 +} and Tb^{3 +} ions compounds, in powder form, the analysis of luminescence suggested that chitosan is not transferring energy to the lanthanide ion; however, the chemical region where the lanthanide ion is found breaks the selection rules and favors the emission of these ions.     

Calorimetric studies of removal of nonsteroidal anti-inflammatory drugs diclofenac and dipyrone from water

Chitosan microspheres were applied to remove the pollutants diclofenac and dipyrone from water. Adsorption studies were adjusted to Langmuir equation. The maximum number of adsorbed moles gave 5.25 × 10⁻⁴ and 4.83 × 10⁻⁴ mol of diclofenac and dipyrone, respectively, per gram of chitosan microspheres. The interactions in solid/liquid interface were calorimetrically followed and gave endothermic values: +22.1 ± 1.3 and +48.7 ± 1.5 kJ mol⁻¹, respectively, for the same sequence. Both Gibbs energy values were negative. Adsorption processes were accompanied by an increase in entropy. These interactions were studied by FTIR spectroscopy which showed a strengthening of the CN stretching (dislocated shifts from 1,325 to 1,371 cm⁻¹) related to a weakening of the NH stretch caused by the interaction with drugs.     

Malonylchitosan Microspheres as a Matrix for Oral Enrofloxacin Delivery

Summary: The purpose of this study was to produce malonylchitosan microspheres to be used as a pH sensitive matrix for the controlled delivery of drugs. Chitosan microspheres were obtained by the coacervation–phase separation method. The microspheres were then treated with malonic acid to obtain amidified chitosan microspheres. The resulting malonylchitosan microspheres were characterized by means of elemental analysis (CHN), infrared spectroscopy, conductometric titration and scanning electron microscopy (SEM). The data obtained from infrared spectroscopy, elemental analysis and conductometric titration of amino groups were consistent with the N-substitution of malonyl groups in the chitosan microspheres. In vivo studies for controlled delivery of enrofloxacin were performed in male Wistar rats and the results indicated increase and prolonged blood levels with delayed peak and improved bioavailability for malonylchitosan microspheres compared to commercial tablets.     

Synthesis and Characterization of N‐methylenephenyl Phosphonic Chitosan

Chitosan is a natural based polymer obtained by alkaline deacetylation of chitin, exhibiting excellent properties such as non‐toxicity, biocompatibility and biodegradability. N‐Methylenephenyl phosphonic chitosan (NMPPC) is synthesized from chitosan by reacting with phenyl phosphonic acid using formaldehyde. The NMPPC was characterized by FTIR, ³¹P‐NMR, X‐ray diffraction, scanning electron microscopy, thermogravimeteric analysis and solubility studies. A significant decrease of molecular weight was observed in the NMPPC. The TGA studies suggested that NMPPC has less thermal stability than chitosan. The X‐ray diffraction analysis showed that NMPPC was amorphous in nature. The solubility property of the polymer was improved after the incorporation of a phenyl phosphonic group.     

Adsorption and preconcentration of divalent metal ions in fossil fuels and biofuels: gasoline, diesel, biodiesel, diesel-like and ethanol by using chitosan microspheres and thermodynamic approach

Biodiesel and diesel-like have been obtained from soybean oil by transesterification and thermal cracking process, respectively. These biofuels were characterized as according to ANP standards by using specific ASTM methods. Ethanol, gasoline, and diesel were purchased from a gas station. Deacetylation degree of chitosan was determined by three distinct methods (conductimetry, FTIR and NMR), and the average degree was 78.95%. The chitosan microspheres were prepared from chitosan by split-coating and these spheres were crosslinked using glutaraldehyde. The surface area of microspheres was determined by BET method, and the surface area of crosslinked microspheres was 9.2 m² g⁻¹. The adsorption isotherms of cooper, nickel and zinc on microspheres of chitosan were determined in petroleum derivatives (gasoline and diesel oil), as well as in biofuels (alcohol, biodiesel and diesel-like). The adsorption order in all fuels was: Cu > Ni > Zn. The elution tests presented the following preconcentration degrees: >4.5 to ethanol, >4.4 to gasoline, >4.0 to diesel, >3.8 to biodiesel and >3.6 to diesel-like. The application of chitosan microspheres in the metal ions preconcentration showed the potential of this biopolymer to enrich fuel sample in order to be analyzed by flame atomic absorption spectrometry.     

Diethylmethyl chitosan as an antimicrobial agent: Synthesis, characterization and antibacterial effects

Chitosan with excellent biodegradable and biocompatible characteristics has received attention as an oral drug delivery vehicle. A quaternized chitosan (i.e., N-diethylmethyl chitosan, DEMC) was prepared based on a modified two-step process via a 2² factorial design to optimize the preparative conditions. DEMC was fully characterized using FTIR and ¹H-NMR spectroscopies. As calculated using NMR-based data, high degree of quaternization was achieved through the optimized two-step process. The highly quaternized biopolymeric derivative was subjected to microbial experiments. The antimicrobial activities of chitosan and DEMC against Escherchia coli were compared by calculation of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Our data indicates that although the antimicrobial activity of DEMC is higher than that of chitosan in acetic acid medium, the both compounds are pH dependent and an increase in concentration of acetic acid results in a significant decrease in both MIC and MBC.     

Synthesis and Application of Chitosan‐g‐PLLA Copolymers

The purpose of this paper is to study the synthesis and application of a new type of chitosan‐g‐poly(L‐lactide) copolymer with different grafting percentage in the presence of triethylamine. FTIR and ¹H NMR results indicate that grafting percentage of graft copolymers increases with the molar feeding ratio of L‐lactide to chitosan. The measurement of XRD and TG shows that graft copolymer exhibits low crystallinity and thermal degradation temperature. Static water contact angle testing suggests that graft copolymer has superior hydrophilicity compared with PLLA, which can be very useful for biomedical applications. 5‐Fluorouracil loaded copolymer microspheres were prepared by phase separation method. The size and distribution of microspheres were measured by a Laser particle analyzer. The microspheres with LLA:CS feeding molar rotio (15∶1) have a mean diameter of 332 nm with a narrow unimodal distribution. The spherical microspheres were observed by transmission electron microscopy (TEM). The microspheres shows good releasing property from drug release in vitro, and the drug release rate decreases as the increase of microspheres size.     

Heterogeneous chloroacetylation of chitosan powder in the presence of sodium bicarbonate

Because of the importance of the chloroacetyl group to carbohydrate synthesis, the objective of this work is to disclose a method that has been found useful for the heterogeneous chloroacetylation of chitosan powder in which sodium bicarbonate is used as the base for the neutralization of the acid byproduct. A series of reactions were conducted to determine the more optimal conditions under which to perform acylation. The three varied aspects of the reaction were the acylating reagent (chloroacetyl chloride and chloroacetic anhydride), the solvent (methylene chloride and N,N‐dimethylformamide), and the temperature (0 or 44 °C). According to Fourier transform infrared (FTIR), the chitosan powder being refluxed in methylene chloride in the presence of chloroacetic anhydride constituted the best conditions. By incorporating these conditions and increasing the amount of the base, we obtained a chloroacetylated chitosan powder that, characterized by FTIR, solid‐state cross‐polarity/magic‐angle spinning ¹³C NMR, and elemental analysis, had degrees of N‐ and O‐chloroacetylation of 0.32 and 0.15, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4174–4181, 2001     

Double Schiff bases derivatives of chitosan by selective C-6 and C-2 oxidation mediated by 5-fluorosalicylaldehyde aniline by TG-GC-MS and TG-FTIR analysis

Abstract

This enhancement in the activity may be efficient on the basis that ligands mainly possess CH=N bond. The use of a structure-based drug design approach (SBDD) provides a way for investigation as well as to understand the molecular basis of the target protein and ligand molecule interactions at the atomic level. Structure-based drug design is the design and optimization of a chemical structure to identify a compound suitable for clinical testing the drug candidates. Chitosan is a polysaccharide with recognized biological activities for improving the functionality of polysaccharide 5-Fluorosalicylaldehyde aniline system. The used for selectively oxidized chitosan to produce tailored derivatives. C-2-5-Fluorosalicylaldehyde-C-6 aniline double Schiff base derivatives of chitosan were synthesized. The structure and properties of the newly synthesized product were characterized by FT-IR, ¹H-NMR, ¹³C-NMR, GC-Mass spectroscopy, and thermal analysis (DSC/TGA). An exothermic process discusses a DSC and TGA analysis of thermal behavior of this polymer was shown to be a possible thermal polymerization of the double bonds in the polymer chains and thermo-oxidation of the polymer.     

离子凝胶反应法制备壳聚糖/N,O-羧甲基壳聚糖微球

以一氯乙酸与壳聚糖反应形成N,O-羧甲基壳聚糖两性聚电解质,分光光度法测定其等电点IEP=2．86。以此两性聚电解质与壳聚糖可以在一定条件下形成微球,光学显微镜和电子显微镜测试表明,控制两种聚电解质配比可以制备不同粒径大小的微球,而超声功率对微球粒径的影响较小。红外光谱测试表明微球中N,O-羧甲基壳聚糖羧基以羧酸根形式存在,分光光度与电导法联合测定表明两种聚电解质以离子凝胶作用形成微球,其最佳制备条件为IEP（CM-CHITOSAN）〈pH〈pKa（CS）,在此较宽的pH值范围内微球可稳定存在。     

Adsorption rate of Reactive Black 5 on chitosan based materials: geometry and swelling effects

The overall adsorption rate of Reactive Black 5 dye (RB5) on chitosan based materials was elucidated using diffusional models. Fundamental aspects, such as, geometry of the adsorbents and swelling effects were considered. Chitosan based materials (powder and film) were prepared from shrimp wastes and characterized regarding to the fundamental features for adsorption. Experimental decay curves were obtained under different conditions of stirring rate and initial dye concentration. The data were modeled according to the external mass transfer and diffusional models. The k_L (external mass transfer coefficient), D_ep (effective pore diffusion coefficient) and D_s (surface diffusion coefficient) values were estimated. For both adsorbents, it was found that the surface diffusion was the intraparticle diffusion mechanism governing the adsorption rate of RB5, since its contribution was higher than 92 % regardless the position and time. The D_s values ranged from 2.85 × 10^?11 to 5.78 × 10^?11 for chitosan powder and from 4.15 × 10^?11 to 12.12 × 10^?11 cm² s^?1 for chitosan films. The RB5 adsorption was faster when chitosan powder was used, mainly at higher stirring rates and initial dye concentrations. The swelling effect was most pronounced for the chitosan films, where, provided an increase of about 65 times in the D_s value.     

Preservation of vitamins content in Cuccìa using an innovative method of processing

Abstract

Cuccìa is a traditional Sicilian food prepared by boiling whole durum wheat kernels, in water, for many hours. This process destroys the vitamins E and B contents of crude kernels. It was rated a method to prepare the Cuccìa, preserving the vitamin content. Four varieties of durum wheat were processed comparing the traditional cooking method (TR-boiling for 5/6?hours), and an innovative one (IN-grains scarification, germination, and cooking at 50?°C for 2?hours). On soups obtained the content of biotin, niacin and α-amylase activity were determined. ANOVA showed the cooking method influences biotin and niacin content having values from 0.56 and 0.72?ng ml^?1 (raw grain) and values close to 0 (TR), while only a 10% decrease (IN) respectively for both vitamins. On the contrary, α-amylase activity was reduced with IN method. The IN method combined with ancient grains, produces the soup with a good vitamin B amount.     

Hydrolysis of mixed monomolecular films of tricaprylin/dilauroylphosphatidylcholine by lipase and phospholipase A₂

The potential of chitosan, a fishery waste-based material, as a soil amendment to clean-up metal contaminated soil was investigated. Chitosan was treated using glutaraldehyde (GLA), epichlorohydrin (ECH) and ethylene glycol diglycidyl ether (EGDE) as cross-linking reagents to enhance its chemical stability in acidic media and to improve its physical properties. Cross-linking treatment had significant effects on chitosan surface area, pore diameter, surface morphology and crystallinity. Interaction with Ag(I), Pb(II) and Cu(II) decreased the crystallinity of the materials and changed their surface morphology significantly. FTIR analysis confirmed that N and O atoms served as binding sites for the metal ions. Chitosan and treated chitosans were able to bind metal ions, even in the presence of K⁺, Cl^? and NO₃^?, which are dominant ions in soil. Therefore, remediation of metal contaminated soil using chitosan and cross-linked treated chitosans as soil amendments is feasible.     

One‐Step Preparation of Multifunctional Chitosan Microspheres by a Simple Sonochemical Method

Chitosan is a biodegradable natural polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density, nontoxicity, and mucoadhesion properties. Processing techniques for the preparation of chitosan microspheres have been extensively developed since the 1980s. The present paper describes for the first time a fast and one‐step process for the preparation of stable chitosan microspheres by a simple sonochemical method. The microspheres were characterized by their particle size, surface morphology, stability, and drug‐entrapment efficiency. The average size of the microspheres was found to be around 1 μm with a narrow size distribution, which enabled them to be used for in vivo applications. The encapsulation of different dyes into these microspheres was readily achieved with more than 75 % efficacy by dissolving them into the organic phase before sonication. The chitosan microspheres demonstrated excellent stability toward acidic and basic conditions ranging from pH 4 to 9, thereby indicating their implementation as possible therapeutic and diagnostic agents. The stability of these microspheres appears to be contributed from intermolecular imine cross‐linking in addition to other noncovalent interactions. The ability of the surface‐exposed amino groups of chitosan microspheres to undergo chemical conjugation with potential drugs and/or targeting vectors was determined by their reaction with fluorescein isothiocyanate (FITC) and fluorescamine followed by confocal microscopy.     

Biosorption of As3+ Ions Using Ternary Microspheres of Chitosan,Yeast, and Gelatin: A Dynamic and Equilibrium Investigation

Ternary biopolymeric microspheres of chitosan, yeast and gelatin were prepared and characterized by FTIR spectral analysis, particle size measurements, and scanning electron micrograph techniques. The prepared microspheres were investigated for static and dynamic studies of adsorption of As⁺³ ions onto the microspheres surfaces at fixed pH and ionic strength of the aqueous solution.The adsorption data were applied to Langmuir and Freundlich isotherm equations and various static parameters were calculated. The dynamic nature of adsorption was quantified in terms of several kinetic constants such as rate constants for adsorption, Lagergreen rate constant, inter particle diffusion rate constant and pore diffusion coefficient. The influence of various experimental parameters such as solid to liquid ratio, pH, temperature, and chemical composition of biopolymeric microspheres were investigated on the adsorption of arsenic ion and various thermodynamic parameter were also calculated.     

mSA-CS双极膜在电还原制备巯基乙酸中的应用

用Ca^2＋改性海藻酸钠(SA), 用戊二醛(GA)改性壳聚糖(CS), 制备mSA-CS聚合物双极膜. 测定膜的红外光谱及机械性能, 并作膜的热重分析. 以扫描电镜观察膜表面和界面层形态. 测定了mCS膜制备溶液的粘度以及mSA, mCS膜的含水率、离子交换容量及酸碱浓度对膜溶胀度的影响. 将mSA-CS双极膜应用于电解还原制备巯基乙酸(TGA). 实验结果表明, 以硫代硫酸钠法合成的TGA和二硫代二乙酸(DTDGA)的混合液作阴极液, TGA初始合成质量分数为4.61%, 电流密度为10 mA•cm^－2下常温电解, 产物巯基乙酸的电流效率达66.7%. 与传统的金属还原法还原DTDGA成TGA相比, 不仅省去了昂贵的金属还原剂的消耗, 而且消除了对环境的污染.     

Electrokinetically-controlled RNA-DNA hybridization assay for foodborne pathogens

Chitosan microspheres were prepared by an emulsion crosslinking method using glutaraldehyde as the cross-linker. Two auxins were dissolved in ethyl benzoate and encapsulated into the microspheres. The best encapsulation efficiency for naphthalene-1-acetic acid and indole-3-acetic acid, respectively, are 68% and 56% and depends on the selection of the appropriate extent of crosslinker, crosslinking time, and the ratio of the oil/water phase. The microspheres were characterized by FTIR spectroscopy. Differential scanning calorimetry was applied to study the thermal stabilities, and scanning electron microscopy to investigate the morphology of the loaded microspheres. In-vitro release studies performed in buffered aqueous methanol at pH 7.4 indicated that the cumulative release rate of the auxins from the particles reaches a maximum (60%) after about 120?h. The release rate in water is higher than the one in methanol. Based on data for the correlation coefficient it is concluded that the drug release is controlled by a diffusion mechanism that follows a super Case-II transport scheme.

The influence of oxidative degradation on the preparation of chitosan nanoparticles

Chitosan nanoparticles were obtained via ionic crosslinking by using the sulfate ion. Chitosan molecular weight was varied by oxidative degradation of the chitosan β-glycoside bond, the molecular weight being indirectly monitored as the chitosan solution reduced viscosity at a fixed polymer concentration. The dependence between some physical properties of the resultant dispersions (turbidity, viscosity, zeta potential, and sedimentation column profile) and reduced viscosity was established. Atomic force microscopy images have shown the resultant particles formed to be clusters of chitosan nanoparticles with a diameter of ca. 70 nm, the interaction between these particles being characterized by FTIR spectroscopy as the result of sulfate bridging. At the end of the paper, the potential of these dispersions for the incorporation of anionic drugs via adsorption was evaluated using a model compound. The resultant dispersions were capable of adsorbing more than 25% of mass of chitosan, being the partition coefficient higher than 3,500.