Selective coupling of methylene groups at a Rh/Os core, yielding C2, C3, or C4 fragments: roles of the adjacent metals in carbon-carbon bond formation

The mixed-metal complex, [RhOs(CO)(4)(dppm)(2)][BF(4)] (1; dppm = micro-Ph(2)PCH(2)PPh(2)) reacts with diazomethane to yield a number of products resulting from methylene incorporation into the bimetallic core. At -80 degrees C the reaction between 1 and CH(2)N(2) yields the methylene-bridged [RhOs(CO)(3)(micro-CH(2))(micro-CO)(dppm)(2)][BF(4)] (2), which reacts further at ambient temperature to give the allyl methyl species, [RhOs(eta(1)-C(3)H(5))(CH(3))(CO)(3)(dppm)(2)][BF(4)] (4). At intermediate temperatures compounds 1 and 2 react with diazomethane to yield the butanediyl complex [RhOs(C(4)H(8))(CO)(3)(dppm)(2)][BF(4)] (3) by the incorporation and coupling of four methylene units. Compound 2 is proposed to be an intermediate in the formation of 3 and 4 from 1 and on the basis of labeling studies a mechanism has been proposed in which sequential insertions of diazomethane-generated methylene fragments into the Rh-C bond of bridging hydrocarbyl fragments occur. Reaction of the tricarbonyl species, [RhOs(CO)(3)(micro-CH(2))(dppm)(2)][BF(4)] with diazomethane over a range of temperatures generates the ethylene complex [RhOs(eta(2)-C(2)H(4))(CO)(3)(dppm)(2)][BF(4)] (7a), but no further incorporation of methylene groups is observed. This observation suggests that carbonyl loss in the formation of the above allyl and butanediyl species only occurs after incorporation of the third methylene fragment. Attempts to generate C(2)-bridged species by the reaction of 1 with ethylene gave no reaction, however, in the presence of trimethylamine oxide the ethylene adducts [RhOs(eta(2)-C(2)H(4))(CO)(3)(dppm)(2)][BF(4)] (7b; an isomer of 7a) and [RhOs(eta(2)-C(2)H(4))(2)(CO)(2)(dppm)(2)][BF(4)] (8) were obtained. The relationship of the above products to the selective coupling of methylene groups, and the roles of the different metals are discussed.     

Facile carbon-fluorine bond activation and subsequent functionalisation of 1,1-difluoroethylene and tetrafluoroethylene promoted by adjacent metal centres

The bridging fluoroolefin ligands in the complexes [Ir(2)(CH(3))(CO)(2)(μ-olefin)(dppm)(2)][OTf] (olefin = tetrafluoroethylene, 1,1-difluoroethylene; dppm = μ-Ph(2)PCH(2)PPh(2); OTf(-) = CF(3)SO(3)(-)) are susceptible to facile fluoride ion abstraction. Both fluoroolefin complexes react with trimethylsilyltriflate (Me(3)SiOTf) to give the corresponding fluorovinyl products by abstraction of a single fluoride ion. Although the trifluorovinyl ligand is bound to one metal, the monofluorovinyl group is bridging, bound to one metal through carbon and to the other metal through a dative bond from fluorine. Addition of two equivalents of Me(3)SiOTf to the tetrafluoroethylene-bridged species gives the difluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-OTf)(μ-C=CF(2))(dppm)(2)][OTf]. The 1,1-difluoroethylene species is exceedingly reactive, reacting with water to give 2-fluoropropene and [Ir(2)(CO)(2)(μ-OH)(dppm)(2)][OTf] and with carbon monoxide to give [Ir(2)(CO)(3)(μ-κ(1):η(2)-C≡CCH(3))(dppm)(2)][OTf] together with two equivalents of HF. The trifluorovinyl product [Ir(2)(κ(1)-C(2)F(3))(OTf)(CO)(2)(μ-H)(μ-CH(2))(dppm)(2)][OTf], obtained through single C-F bond activation of the tetrafluoroethylene-bridged complex, reacts with H(2) to form trifluoroethylene, allowing the facile replacement of one fluorine in C(2)F(4) with hydrogen.     

Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

Germyl- and germylene-bridged complexes of Rh/Ir and subsequent chemistry of a bridging germylene group

A series of neutral and cationic germylene-bridged complexes and a neutral germyl(germylene) complex have been synthesized and characterized by NMR spectroscopy and X-ray crystallography. Reaction of 1 equiv of primary germanes, RGeH(3) (R = Ph, (t)Bu), with [RhIr(CO)(3)(dppm)(2)] (1) at low-temperature yields [RhIr(GeH(2)R)(H)(CO)(3)(dppm)(2)] (R = Ph (3) or (t)Bu (4)), the products of single Ge-H bond activation, which upon warming transform to the germylene-bridged dihydrides, [RhIr(H)(2)(CO)(2)(μ-GeHR)(dppm)(2)] (R = Ph (5) or (t)Bu (6)) by activation of a second Ge-H bond accompanied by CO loss. Both classes of compounds have the diphosphines folded back in a "cradle-shaped" geometry. Although compound 5 reacts with additional phenylgermane at -40 °C to give a germylene-bridged/germyl product, [RhIr(GeH(2)Ph)(H)(2)(CO)(2)(κ(1)-dppm)(μ-GeHPh)(μ-H)(dppm)] (7), warming results in decomposition. However, reaction of 5 with 1 equiv of diphenylgermane at ambient temperature results in a novel mixed bis(μ-germylene) complex, [RhIr(CO)(2)(μ-GeHPh)(μ-GePh(2))(dppm)(2)] (8), containing both mono- and disubstituted germylene fragments. Reaction of 1 equiv of diphenylgermane with complex 1 produces a similar monogermylene-bridged product, [RhIr(H)(2)(CO)(2)(μ-GePh(2))(dppm)(2)] (9), while reaction of 1 with 2 equiv of diphenylgermane yields the germyl/germylene product [RhIr(H)(GeHPh(2))(CO)(3)(κ(1)-dppm)(μ-GePh(2))(dppm)] (10). The above reactions, incorporating first one and then a second equivalent of primary and secondary germanes, were studied by low-temperature multinuclear NMR spectroscopy, revealing details about the stepwise activations of multiple Ge-H bonds. Reaction of diphenylgermane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] (2) leads to a cationic A-frame-type germylene- and hydride-bridged product, [RhIr(CO)(2)(μ-H)(μ-GePh(2))(dppm)(2)][CF(3)SO(3)] (3), which reversibly activates H(2), yielding a germyl-bridged dihydride and reacts stoichiometrically with water, methanol, and HCl to yield the respective germanol, germamethoxy, and germylchloride products.     

Behavior of neutral phosphido derivatives of platinum and palladium toward silver centers

The reaction of the neutral binuclear complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(phen)] (phen = 1,10-phenanthroline, R(F) = C(6)F(5); M = Pt, 1; M = Pd, 2) with AgClO(4) or [Ag(OClO(3))(PPh(3))] affords the trinuclear complexes [AgPt(2)(μ-PPh(2))(2)(R(F))(2)(phen)(OClO(3))] (7a) or [AgPtM(μ-PPh(2))(2)(R(F))(2)(phen)(PPh(3))][ClO(4)] (M = Pt, 8; M = Pd, 9), which display an "open-book" type structure and two (7a) or one (8, 9) Pt-Ag bonds. The neutral diphosphine complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(P-P)] (P-P = 1,2-bis(diphenylphosphino)methane, dppm, M = Pt, 3; M = Pd, 4; P-P = 1,2-bis(diphenylphosphino)ethane, dppe, M = Pt, 5; M = Pd, 6) react with AgClO(4) or [Ag(OClO(3))(PPh(3))], and the nature of the resulting complexes is dependent on both M and the diphosphine. The dppm Pt-Pt complex 3 reacts with [Ag(OClO(3))(PPh(3))], affording a silver adduct 10 in which the Ag atom interacts with the Pt atoms, while the dppm Pt-Pd complex 4 reacts with [Ag(OClO(3))(PPh(3))], forming a 1:1 mixture of [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(dppm)] (11), in which the silver atom is connected to the Pt-Pd moiety through Pd-(μ-PPh(2))-Ag and Ag-P(k(1)-dppm) interactions, and [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(PPh(3))(2)][ClO(4)] (12). The reaction of complex 4 with AgClO(4) gives the trinuclear derivative 11 as the only product. Complex 11 shows a dynamic process in solution in which the silver atom interacts alternatively with both Pd-μPPh(2) bonds. When P-P is dppe, both complexes 5 and 6 react with AgClO(4) or [Ag(OClO(3))(PPh(3))], forming the saturated complexes [(PPh(2)C(6)F(5))(R(F))Pt(μ-PPh(2))(μ-OH)M(dppe)][ClO(4)] (M = Pt, 13; Pd, 14), which are the result of an oxidation followed by a PPh(2)/C(6)F(5) reductive coupling. Finally, the oxidation of trinuclear derivatives [(R(F))(2)Pt(II)(μ-PPh(2))(2)Pt(II)(μ-PPh(2))(2)Pt(II)L(2)] (L(2) = phen, 15; L = PPh(3), 16) by AgClO(4) results in the formation of the unsaturated 46 VEC complexes [(R(F))(2)Pt(III)(μ-PPh(2))(2)Pt(III)(μ-PPh(2))(2)Pt(II)L(2)][ClO(4)](2) (17 and 18, respectively) which display Pt(III)-Pt(III) bonds.     

The bridged binding mode as a new, versatile template for the selective activation of carbon-fluorine bonds in fluoroolefins: activation of trifluoroethylene

We report the selective activation of carbon-fluorine bonds in trifluoroethylene using the diiridium complex [Ir(2)(CH(3))(CO)(2)(dppm)(2)][OTf] (1). Coordination of trifluoroethylene in a bridging position between the two metals in 1 results in facile fluoride ion loss in three different ways. Attack by strong fluorophiles such as Me(3)SiOTf and HOTf results in F(-) removal from one of the geminal fluorines to give the cis-difluorovinyl-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-κ(1):η(2)-C(F)═CFH)(dppm)(2)][OTf]. A second activation can also be accomplished by addition of excess Me(3)SiOTf to give the fluorovinylidene-bridged product [Ir(2)(CH(3))(OTf)(CO)(2)(μ-C(2)FH)(dppm)(2)][OTf](2). Interestingly, activation of the trifluoroethylene-bridged precursor by water also occurs, yielding [Ir(2)(CH(3))(CO)(2)(κ(1)-C(H)═CF(2))(μ-OH)(dppm)(2)][OTf], in which the lone vicinal fluorine is removed, leaving a geminal arrangement of fluorines in the product. A [1,2]-fluoride shift can also be induced in the trifluoroethylene-bridged precursor upon the addition of CO to give the 2,2,2-trifluoroethylidene-bridged product [Ir(2)(CH(3))(CO)(3)(μ-C(H)CF(3))(dppm)(2)][CF(3)SO(3)]. Addition of hydrogen to the cis-difluorovinyl-bridged product results in the quantitative elimination of cis-difluoroethylene, while its reaction with CO yields a mixture of cis-difluoropropene and 2,3-difluoropropene by reductive elimination of the methyl and difluorovinyl groups with an accompanying isomerization in the case of the second product. Finally, protonation of the 2,2,2-trifluoroethylidene-bridged product liberates 1,1,1-trifluoroethane, in which one hydrogen (H(+)) is from the acid while the other hydrogen (H(-)) is derived from activation of the methyl group.     

Synthesis and characterization of diiron dithiolate complexes containing a quinoxaline bridge

A potential model complex for the hydrogenase active site, [Fe(2){(μ-CH(2)S)(2)R}(CO)(6)] (1) (R = quinoxaline), was synthesized by condensation of [(μ-LiS)(2)Fe(2)(CO)(6)] with 2,3-bis(bromomethyl)quinoxaline. Reactions of 1 with bis(diphenylphosphino)methane (dppm) under a range of conditions yielded substituted complexes [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(dppm)] (2), [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(k(2)-dppm)] (3) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(μ-dppm)] (4). X-ray crystallography confirms that in 2, the dppm is terminally bonded to an iron atom via one phosphorus atom, whereas in 3, it acts as a chelating ligand to coordinate to an iron center in a dibasal-substituted manner. In 4, the dppm bridges the two iron atoms in a cis basal/basal fashion with one phosphorus bonded to each iron atom. Treatment of 1 with various tertiary phosphines at room temperature in acetonitrile (MeCN) generates a range of mono-substituted products [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)L] (5, L = PEt(3); 6, PMe(3); 7, PPh(3); 8, Me(2)PPh). With Bu(t)NC, mono- and di-substituted [Fe(2){(μ-CH(2)S)(2)R}(CO)(5)(Bu(t)NC)] (9) and [Fe(2){(μ-CH(2)S)(2)R}(CO)(4)(Bu(t)NC)(2)] (10) complexes are generated. All the complexes were characterized by elemental analysis, IR, MS and NMR spectroscopy. IR and NMR spectroscopic studies suggest that addition of excess HBF(4)·OEt(2) acid to 1-4 led to the protonation of quinoxaline nitrogen atoms. In contrast, 5-10 were not stable in acidic media. Electrochemistry of 1-4 was investigated in the acetonitrile medium (0.1 M Bu(4)NPF(6)). The electrochemical instability of the reduced ligand, quinoxaline, and the reduced forms of these complexes revealed from the electrochemical studies suggests that they do not provide ideal models of the hydrogenase active site.     

Photochemical synthesis and reactivity studies of dirhenacarboranes

Ultraviolet irradiation of [PPh(4)][closo-1-CB(8)H(9)] with [Re(2)(CO)(10)] in THF (tetrahydrofuran) at ambient temperature affords the dirhenacarborane anion [6,10-{Re(CO)(4)}-10-(micro-H)-6,6,6-(CO)(3)-closo-6,1-ReCB(8)H(8)]-, isolated as its [PPh(4)]+ salt (1). Further irradiation of 1 yields a second isomeric anion [6,10-{Re(CO)(4)}-6-(micro-H)-10,10,10-(CO)(3)-closo-10,1-ReCB(8)H(8)]- that was characterized as a [N(PPh(3))(2)]+ salt (2). Reaction of 1 with NOBF(4) produces the neutral dirhenacarborane compound [8,10-{Re(CO)(4)}-8,10-(micro-H)2-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(7)] (3). Compounds 1-3 all consist of a central {closo-ReCB(8)} cluster with a second rhenium center which is exo-polyhedral. Attempts to substitute the carbonyl ligands of 3 with other donor ligands such as phosphines, isocyanides, or alkynes resulted in loss of the exo-polyhedral rhenium moiety and formation of a monorhenium anion, [6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(9)]-, isolated as its [N(PPh(3))(2)]+ salt (4). The heterometallic dimetallacarborane species, [6,7,10-{Cu(PPh(3))}-7,10-(micro-H)2-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(7)] (5) and [6,7-{Au(PPh(3))}-7-(micro-H)-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(8)] (6) were formed from reactions of 4 with {Cu(PPh(3))}+ and {Au(PPh(3))}+, respectively. Similarly, reaction of 4 with {Ir(CO)(PPh(3))(2)}+ afforded two products, [6,10-{Ir(micro-PPh(2))(Ph)(CO)(PPh(3))}-10-(micro-H)-6-CO-6-NO-closo-6,1-ReCB(8)H(8)] (7) and [6,9,10-{Ir(micro-PPh(2))(H)(PPh(3))}-9-(micro-H)-6-CO-6-NO-10-Ph-closo-6,1-ReCB(8)H(8)] (8). The solid-state structures of compounds 1-8 were all unequivocally established by single-crystal X-ray diffraction experiments.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Synthesis, dynamic behavior, and reactivity of new unsaturated heterotrinuclear 46 valence electron complexes

The reaction of [NBu(4)](2)[(C(6)F(5))(2)Pt(μ-PPh(2))(2)Pd(μ-PPh(2))(2)Pt(C(6)F(5))(2)] (1a) with [AgPPh(3)](+) results in the oxidation of two bridging diphenylphosphanides to give the 46e species [(PPh(3))(C(6)F(5))(2)Pt(2)(μ-P(2)Ph(2))Pd(μ-PPh(2))(μ-Ph(2)P(4)-P(3)Ph(2))Pt(1)(C(6)F(5))(2)] (3). Complex 3 displays two tetracoordinated terminal platinum centers and a central Pd atom that is bonded to three P atoms and that completes its coordination sphere by a rather long (3.237 ?) dative Pt(2) → Pd bond. Complex 3 is also obtained when [(R(F))(2)Pt(μ-PPh(2))Pd(μ-PPh(2))(μ-Ph(2)P-PPh(2))Pt(R(F))(2)] (2) is reacted with PPh(3). Analogously, the addition of PPh(2)Et, CO or pyridine to 2 affords the 46e complexes of general formula [(L)(C(6)F(5))(2)Pt(2)(μ-P(2)Ph(2))Pd(μ-PPh(2))(μ-Ph(2)P(4)-P(3)Ph(2))Pt(1)(C(6)F(5))(2)] (L = PPh(2)Et, 4; L = CO, 6; L = pyridine, 7). The geometry around Pt(2) is determined by the bulkiness of L bonded to Pt. Thus, in complexes 3 (L = PPh(3)) and 4 (L = PPh(2)Et), the ligand L occupies the trans position with respect to μ-P(2), and in 6 (L = CO), the ligand L occupies the cis position with respect to μ-P(2). Interestingly, for 7 (L = py), both isomers 7-trans and 7-cis, could be isolated. Although 4 did not react with an excess of PPh(2)Et, the reaction with the less sterically demanding CH(3)CN ligand resulted in the opening of the Pt(2)-P(2)-Pd cycle with formation of the saturated 48e species [(PPh(2)Et)(C(6)F(5))(2)Pt(μ-PPh(2))Pd(MeCN)(μ-PPh(2))(μ-Ph(2)P-PPh(2))Pt(C(6)F(5))(2)] (8). The saturated 48e complex [(CO)(C(6)F(5))(2)Pt(μ-PPh(2))Pd(MeCN)(μ-PPh(2))(μ-Ph(2)P-PPh(2))Pt(C(6)F(5))(2)] (9) was obtained by acetonitrile addition to 6. Beside the hindered rotation of the pentafluorophenyl groups and a flip-flop motion of the Pd-P-Pt(1)-P-P ring observed at low T, a rotation about the Pt(2)-P(2) bond and a P-C oxidative addition/reductive elimination process occur for 3 and 4 at room temperature. A "through-space" (19)F-(31)P spin-spin coupling between an ortho-F and the P(4) is observed for complexes 3 and 4, having the C(6)F(5) groups bonded to Pt(2) in mutually trans position. The XRD structures of complexes 3, 6, 7-trans, 7-cis, 8, and 9 are described.     

Transition metal complexes of the chelating phosphine borane ligand Ph2PCH2Ph2P.BH3

Chromium and ruthenium complexes of the chelating phosphine borane H(3)B.dppm are reported. Addition of H(3)B.dppm to [Cr(CO)(4)(nbd)](nbd = norbornadiene) affords [Cr(CO)(4)(eta1-H(3)B.dppm)] in which the borane is linked to the metal through a single B-H-Cr interaction. Addition of H(3)B.dppm to [CpRu(PR(3))(NCMe)(2)](+)(Cp =eta5)-C(5)H(5)) results in [CpRu(PR(3))(eta1-H(3)B.dppm)][PF(6)](R = Me, OMe) which also show a single B-H-Ru interaction. Reaction with [CpRu(NCMe)(3)](+) only resulted in a mixture of products. In contrast, with [Cp*Ru(NCMe)(3)](+)(Cp*=eta5)-C(5)Me(5)) a single product is isolated in high yield: [Cp*Ru(eta2-H(3)B.dppm)][PF(6)]. This complex shows two B-H-Ru interactions. Reaction with L = PMe(3) or CO breaks one of these and the complexes [Cp*Ru(L)(eta1-H(3)B.dppm)][PF(6)] are formed in good yield. With L = MeCN an equilibrium is established between [Cp*Ru(eta2-H(3)B.dppm)][PF(6)] and the acetonitrile adduct. [Cp*Ru (eta2-H(3)B.dppm)][PF(6)] can be considered as being "operationally unsaturated", effectively acting as a source of 16-electron [Cp*Ru (eta1-H(3)B.dppm)][PF(6)]. All the new compounds (apart from the CO and MeCN adducts) have been characterised by X-ray crystallography. The solid-state structure of H(3)B.dppm is also reported.     

The reactions of pyridinyl thioesters with triiron dodecacarbonyl: their novel diiron carbonyl complexes and mechanistic investigations

Reaction of Fe(3)(CO)(12) with pyridinyl thioester ligand PyCH(2)SCOCH(3) (L(1), Py = pyridin-2-yl) produced complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(5)] (1) (PyCH(2)S = pyridin-2-ylmethanethiolate). When complex 1 reacted with PPh(3), a monosubstituted complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(4)PPh(3)] (2), was derived. Reaction of the same precursor with analogous thioester ligand PyCH(2)SCOPy (L(2)) generated three novel diiron complexes, [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(5)] (3), [Fe(2)(κ-Py)'(μ-SCH(2)Py)(CO)(5)] (4), and [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(6)] (5). Complexes 3 and 4 are structural isomers. Complex 5 could be converted into complex 4 but the conversion from complex 5 to the isomer 3 was not observed. All the five complexes were fully characterised using FTIR, NMR, and other techniques. Their structures were determined using X-ray single crystal diffraction analysis. The oxidative formation of complexes 1, 3, 4, and 5 involved C-S and/or C-C bonds cleavages. To probe possible mechanisms for these cleavages, DFT calculations were performed. From the calculations, viable reaction pathways leading to the formation of all the isolated products were delineated. The results of the theoretic calculations also allowed rationalisation of the experimental observations.     

Investigation of mixed oxidation state cyanide-bridged Re(V)oxo (acac(2)en/pn) and Re(I)(bipy)(CO)3 complexes

A series of cyanide-bridged complexes that combine a low-valent photoacceptor rhenium(I) metal center with an electroactive midvalent rhenium(V) complex were prepared. The synthesis involved the preparation of novel asymmetric rhenium(V) oxo compounds, cis-Re(V)O(CN)(acac(2)en) (1) and cis-Re(V)O(CN)(acac(2)pn) (2), formed by reacting trans-[Re(V)O(OH(2))(acac(2)en)]Cl or trans-Re(V)O(acac(2)pn)Cl with [NBu(4)][CN]. The μ-bridged cyanide mixed-oxidation Re(V)-Re(I) complexes were prepared by incubating the asymmetric complexes, 1 or 2, with fac-[Re(I)(bipy)(CO)(3)][OTf] to yield cis-[Re(V)O(acac(2)en)(μ-CN-1κC:2κN)-fac-Re(I)(bipy)(CO)(3)][PF(6)] (3) and [cis-Re(V)O(acac(2)pn)(μ-CN-1κC:2κN)-fac-Re(I)(bipy)(CO)(3)][PF(6)] (4), respectively.     

Binary pnictogen azides--an experimental and theoretical study: [As(N3)4]-, [Sb(N3)4]-, and [Bi(N3)5(dmso)]2-

[PPh(4)][EI(4)] (E=As, Sb, Bi) salts were reacted with four and five equivalents of AgN(3) to form tetraazidopnictates and pentaazidopnictates of the type [PPh(4)][E(N(3))(4)] and [PPh(4)](2)[E(N(3))(5)], respectively. The synthesis of [PPh(4)][P(N(3))(4)] was also attempted from the reaction of P(N(3))(3) with [PPh(4)]N(3), but it yielded only the starting materials. Herein, we report the synthesis and structure elucidation of [PPh(4)][E(N(3))](4) (E=As, Sb) and pentaazidobismuthate, stabilized as the dimethyl sulfoxide (DMSO) anion adduct, [PPh(4)](2)[Bi(N(3))(5)(dmso)]. Successive anion formation along the series E(N(3))(3)+nN(3)(-) (n=1-3) and E(N(3))(5)+N(3)(-) was studied by density functional theory.     

A convenient route to dinuclear chloro-bridged platinum(II) derivatives via nitrile complexes

The syntheses of the complexes [PtCl(2)(NCR)L] [R = Me, Et; L = PPh(3); R = Et, L = Py, CO] and [PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] are described starting from the easily available [PtCl(2)(NCR)(2)]. The stability of the products under different experimental conditions is discussed as well as their use as precursors to dinuclear complexes [Pt(μ-Cl)ClL](2). The crystal and molecular structures of cis-[PtCl(2)(NCEt)(PPh(3))], [SP-4-2]-[PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] and trans-[Pt(μ-Cl){(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}](2) are reported.     

Reactions of phthalazine, quinazoline, 4,7-phenanthroline and 2,3'-bipyridine with ruthenium carbonyl

The reactions of [Ru(3)(CO)(12)] with four aromatic diazines have been studied in THF at reflux temperature. With phthalazine (L(1)), the compound [Ru(3)(μ-κ(2)N(2)N(3)-L(1))(μ-CO)(3)(CO)(7)] (1), which contains an intact phthalazine ligand in an axial position bridging an Ru-Ru edge through both N atoms, is initially formed but it reacts with more phthalazine to give [Ru(3)(κN(2)-L(1))(μ-κ(2)N(2)N(3)-L(1))(μ-CO)(3)(CO)(6)] (2), in which a π-π stacking interaction between the aromatic rings of both ligands determines their position in cluster axial sites on the same face of the Ru(3) triangle. With quinazoline (HL(2)), the cyclometalated hydrido decacarbonyl derivative [Ru(3)(μ-H)(μ-κ(2)N(3)C(4)-L(2))(CO)(10)] (3) is initially produced but it partially decarbonylates under the reaction conditions to give [Ru(6)(μ-H)(2)(μ-κ(2)N(3)C(4)-L(2))(μ(3)-κ(3)-N(1)N(3)C(4)-L(2))(CO)(19)] (4), which results from the displacement of a CO ligand of 3 by the uncoordinated N(1) atom of another molecule of 3. With 4,7-phenanthroline (H(2)L(3)), the stepwise formation of the cyclometalated derivatives [Ru(3)(μ-H)(μ-κ(2)N(4)C(3)-HL(3))(CO)(10)] (5) and two isomers of [Ru(6)(μ-H)(2)(μ(4)-κ(4)N(4)C(3)N(7)C(8)-L(3))(CO)(20)] (6a, 6b) takes place. In compounds 6a and 6b, two Ru(3)(μ-H)(CO)(10) trinuclear units are symmetrically (C(2) in 6a or C(S) in 6b) bridged by a doubly-cyclometalated 4,7-phenanthroline ligand. With 2,3'-bipyridine (HL(4)), two products have been isolated, [Ru(3)(μ-H)(μ-κ(2)N(3')C(4')-L(4))(CO)(10)] (7) and [Ru(3)(μ-H)(μ-κ(3)N(2)N(3')C(2')-L(4))(CO)(9)] (8). While compound 7 contains an N(3')C(4')-cyclometalated 2,3'-bipyridine, in compound 8 an N(3')C(2')-cyclometalation is accompanied by the coordination of the N(2) atom of the remaining pyridine fragment. The structures of compounds 2, 3, 4, 6a and 8 have been determined by X-ray diffraction crystallography.     

Co-complexation of Lithium Gallates on the Titanium Molecular Oxide {[Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)

Amide and lithium aryloxide gallates [Li(+){RGaPh(3)}(-)] (R = NMe(2), O-2,6-Me(2)C(6)H(3)) react with the μ(3)-alkylidyne oxoderivative ligand [{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)] (1) to afford the gallium-lithium-titanium cubane complexes [{Ph(3)Ga(μ-R)Li}{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CH)] [R = NMe(2) (3), O-2,6-Me(2)C(6)H(3) (4)]. The same complexes can be obtained by treatment of the [Ph(3)Ga(μ(3)-O)(3){Ti(η(5)-C(5)Me(5))}(3)(μ(3)-CH)] (2) adduct with the corresponding lithium amide or aryloxide, respectively. Complex 3 evolves with formation of 5 as a solvent-separated ion pair constituted by the lithium dicubane cationic species [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)](+) together with the anionic [(GaPh(3))(2)(μ-NMe(2))](-) unit. On the other hand, the reaction of 1 with Li(p-MeC(6)H(4)) and GaPh(3) leads to the complex [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)][GaLi(p-MeC(6)H(4))(2)Ph(3)] (6). X-ray diffraction studies were performed on 1, 2, 4, and 5, while trials to obtain crystals of 6 led to characterization of [Li{(μ(3)-O)(3)Ti(3)(η(5)-C(5)Me(5))(3)(μ(3)-CH)}(2)][PhLi(μ-C(6)H(5))(2)Ga(p-MeC(6)H(4))Ph] 6a.     

C-H activation and C=C double bond formation reactions in iridium ortho-methyl arylphosphane complexes

The Vaska-type iridium(I) complex [IrCl(CO){PPh(2)(2-MeC(6)H(4))}(2)] (1), characterized by an X-ray diffraction study, was obtained from iridium(III) chloride hydrate and PPh(2)(2,6-MeRC(6)H(3)) with R=H in DMF, whereas for R=Me, activation of two ortho-methyl groups resulted in the biscyclometalated iridium(III) compound [IrCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)] (2). Conversely, for R=Me the iridium(I) compound [IrCl(CO){PPh(2)(2,6-Me(2)C(6)H(3))}(2)] (3) can be obtained by treatment of [IrCl(COE)(2)](2) (COE=cyclooctene) with carbon monoxide and the phosphane in acetonitrile. Compound 3 in CH(2)Cl(2) undergoes intramolecular C-H oxidative addition, affording the cyclometalated hydride iridium(III) species [IrHCl(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}] (4). Treatment of 2 with Na[BAr(f) (4)] (Ar(f)=3,5-C(6)H(3)(CF(3))(2)) gives the fluxional cationic 16-electron complex [Ir(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}(2)][BAr(f) (4)] (5), which reversibly reacts with dihydrogen to afford the delta-agostic complex [IrH(CO){PPh(2)(2,6-CH(2)MeC(6)H(3))}{PPh(2)(2,6-Me(2)C(6)H(3))}][BAr(f)(4)] (6), through cleavage of an Ir-C bond. This species can also be formed by treatment of 4 with Na[BAr(f)(4)] or of 2 with Na[BAr(f)(4)] through C-H oxidative addition of one ortho-methyl group, via a transient 14-electron iridium(I) complex. Heating of the coordinatively unsaturated biscyclometalated species 5 in toluene gives the trans-dihydride iridium(III) complex [IrH(2)(CO){PPh(2)(2,6-MeC(6)H(3)CH=CHC(6)H(3)Me-2,6)PPh(2)}][BAr(f) (4)] (7), containing a trans-stilbene-type terdentate ligand, as result of a dehydrogenative carbon-carbon double bond coupling reaction, possibly through an iridium carbene species.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.     

Coordination features of a hybrid scorpionate/phosphane ligand exemplified with Iridium

Although the pentacoordinated complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(cod)] (1; pz=pyrazolyl, cod=1,5-cyclooctadiene), isolated from the reaction of [{Ir(mu-Cl)(cod)}(2)] with [Li(tmen)][B(allyl)(CH(2)PPh(2))- (pz)(2)] (tmen=N,N,N',N'-tetramethylethane-1,2-diamine), shows behavior similar to that of the related hydridotris(pyrazolyl)borate complex, the carbonyl derivatives behave in a quite different way. On carbonylation of 1, the metal--metal-bonded complex [(Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}CO)(2)(mu-CO)] (2) that results has a single ketonic carbonyl bridge. This bridging carbonyl is labile such that upon treatment of 2 with PMe(3) the pentacoordinated Ir(I) complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PMe(3))] (3) was isolated. Complex 3 shows a unique fac coordination of the hybrid ligand with the allyl group eta(2)-bonded to the metal in the equatorial plane of a distorted trigonal bipyramid with one pyrazolate group remaining uncoordinated. This unusual feature can be rationalized on the basis of the electron-rich nature of the metal center. The related complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PPh(3))] (4) was found to exist in solution as a temperature-dependent equilibrium between the cis-pentacoordinated and trans square planar isomers with respect to the phosphorus donor atoms. Protonation of 3 with different acids is selective at the iridium center and gives the cationic hydrides [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PMe(3))]X (X=BF(4) (5), MeCO(2) (6), and Cl (7)). Complex 7 further reacts with HCl to generate the unexpected product [Ir(CO)Cl{(Hpz)B(CH(2)PPh(2))(pz)CH(2)CH(Me)}(PMe(3))]Cl (9; Hpz=protonated pyrazolyl group) formed by the insertion of the hydride into the Ir-(eta(2)-allyl) bond. In contrast, protonation of complex 4 with HCl stops at the hydrido complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PPh(3))]Cl (8). X-ray diffraction studies carried out on complexes 2, 3, and 9 show the versatility of the hybrid scorpionate ligand in its coordination.