Transmission of electronic effects through the {closo-1-CB9} and {closo-1-CB11} cages: apparent dissociation constants for series of [closo-1-CB9H8-1-COOH-10-X] and [closo-1-CB11H10-1-COOH-12-X] acids

The apparent ionization constants pK(a)' for series of carboxylic acids [closo-1-CB(9)H(8)-1-COOH-10-X](-) (1) and [closo-1-CB(11)H(10)-1-COOH-12-X](-) (2), where X = H, I, n-C(6)H(13), (+)NMe(3), (+)N(2), (+)SMe(2), OC(5)H(11), were measured in EtOH/H(2)O (1/1, v/v) at 24 °C. Correlation analysis of the pK(a)' values using Hammett substituent constants σ(p)(X) gave the reaction constant ρ = 0.87 ± 0.04 for series 1 and ρ = 1.00 ± 0.09 for series 2. These values are higher than for derivatives of PhCH═CHCOOH (ρ = 0.70 ± 0.09 in 55% EtOH) and correspond to 56% and 65% efficiencies in transmission of electronic effects by [closo-1-CB(9)H(10)](-) (E) and [closo-1-CB(11)H(12)](-) (F), respectively, as compared to benzene (A). Experimental results were supported with DFT calculations of relative acidity for series of acids derived from A, E, and F in aqueous medium.     

Monocarbaborane anion chemistry. [COOH], [CH2OH] and [CHO] units as functional groups on ten-vertex monocarbaborane anionic compounds

B(10)H(14) reacts with para-C(6)H(4)(CHO)(COOH) in aqueous KOH solution to give the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-COOH)](-) anion 1, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-COOH)](-) anion 2. Upon heating, anion 2 rearranges to form the [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-COOH)](-) anion 3. Similarly, B(10)H(14) with glyoxylic acid OHCCOOH in aqueous KOH gives the [arachno-6-CB(9)H(13)-6-(COOH)](-) anion 4, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(COOH)](-) anion 5. Upon heating, anion 5 rearranges to give the [closo-1-CB(9)H(9)-1-(COOH)](-) anion 6. Reduction of the [COOH] anions 3 and 6 with diisobutylaluminium hydride gives the [CH(2)OH] hydroxy anions [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) and [closo-1-CB(9)H(9)-1-(CH(2)OH)](-) 8 respectively. The [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) anion 7 can also be made via isomerisation of the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-CH(2)OH)](-) anion 9, in turn obtained from the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-CH(2)OH)](-) anion 10, which is obtained from the reaction of B(10)H(14) with terephthaldicarboxaldehyde, C(6)H(4)-para-(CHO)(2), in aqueous KOH solution. Oxidation of the hydroxy anions 7 and 8 with pyridinium dichromate gives the aldehydic [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CHO)](-) anion 11 and the aldehydic [closo-1-CB(9)H(9)-1-(CHO)](-) anion 12 respectively, characterised as their 2,4-dinitrophenylhydrazone derivatives, the [closo-1-CB(9)H(9)-1-C(6)H(4)-para-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion 13 and the [closo-1-CB(9)H(9)-1-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion respectively.     

Preparation of 1-p-halophenyl and 1-p-biphenylyl substituted monocarbadodecaborate anions [closo-1-Ar-CB11H11]- by insertion of arylhalocarbenes into [nido-B11H14]-

In the presence of a strong base, benzal chloride (C(6)H(5)CHCl(2)) and its p-substituted derivatives react with [nido-B(11)H(14)](-) to yield [closo-1-p-X-C(6)H(4)-CB(11)H(11)](-) (X = H, F, Cl, Br, I, Ph), presumably by insertion of an arylhalocarbene and oxidation. On a 1-g scale, the yields are 30-40%, except in the case of p-iodobenzal chloride, which yields only 12% of the insertion product.     

Crown compounds for anions: sandwich and half-sandwich complexes of cyclic trimetric perfluoro-o-phenylenemercury with polyhedral closo-[B10H10]2- and closo-[B12H12]2- anions

It has been shown by IR and NMR spectroscopy that cyclic trimeric perfluoro-o-phenylenemercury (o-C6F4-Hg)3 (1) is capable of binding closo-[B10H10]2- and closo-[B12H12]2- anions to form complexes [[(o-C6F4Hg)3](B10-H10)]2- (2), [[(o-C6F4Hg)3]2(B10H10)]2-(3), [[(o-C6F4Hg)3](B12H12)]2- (4), and [[(o-C6F4Hg)3]2(B12H12)]2- (5). According to IR data, the bonding of the [B10H10]2- and [B12H12]2- ions to the macrocycle in these complexes is accomplished through the formation of B-H-Hg bridges. Complexes 2, 3, and 5 have been isolated in analytically pure form and have been characterized by spectroscopic means. X-ray diffraction studies of 3 and 5 have revealed that these compounds have unusual sandwich structures, in which the polyhedral di-anion is located between the planes of two molecules of 1 and is bonded to each of them through two types of B-H-Hg bridges. One type is the simultaneous coordination of a B-H group to all three Hg atoms of the macrocycle. The other type is the coordination of a B-H group to a single Hg atom of the cycle. According to X-ray diffraction data, complex 2 has an analogous but half-sandwich structure. The obtained complexes 2-5 are quite stable; their stability constants in THF/acetone (1:1) at 20 degrees C have been determined as 1.0 x 10(2)Lmol(-1), 2.6 x 10(3)L(2)mol(2), 0.7 x 10(2)Lmol(-1), and 0.98 x 10(3)L(2)mol(-2), respectively.     

A practical synthesis of isomerically pure 1,10-difunctionalized derivatives of the [closo-1-CB9H10] anion

The isomer-free [closo-1-CB9H(8)-1-COOH-10-I]- anion was prepared in four steps and 10% overall yield from B10H14. The key step is the skeletal isomerization of the [closo-2-CB9H8-2-COOH-7-I]- anion to a mixture of the 10- and 6-iodo derivatives of [closo-1-CB9H(9)-1-COOH]- formed in up to a 3:1 ratio. The carboxylic acid 4 was converted to the amine [closo-1-CB9H(8)-1-NH(2)-10-I]- using the Curtius reaction. The relative thermodynamic stability of each product was calculated at the DFT and MP2 levels of theory. The regioselectivity of electrophilic substitution in [closo-CB9H10]- derivatives was briefly investigated using the NBO population analysis of the MP2 wave function.     

1-H2N-CB11F11]---synthesis and reactions of a functionalized fluorinated carbadodecaborate anion

In anhydrous hydrogen fluoride, K[1-H2N-CB11H11] is fluorinated with elemental fluorine to produce K[1-H2N-CB11F11]. Under strong alkaline conditions, two fluorine atoms of the [1-H2N-CB11F11]- anion are regioselectively exchanged, yielding the [1-H2N-4,6-(HO)2-CB11F9]- anion via [1-H2N-6-HO-CB11F10]- as an intermediate. Both hydroxycarborate anions were isolated as [Ph4P]+ salts. All of the species were characterized by IR, Raman, and multi-NMR spectroscopy, thermal analysis (DSC) as well as by mass spectrometry (MALDI). The assignment of the NMR signals was supported by DFT calculations. Solid-state structures of K[1-H2N-CB11F11], [BzPh3P][1-H2N-CB11F11], [Ph4P][1-H2N-4,6-(HO)2-CB11F9], [Ph4P][1-H2N-6-HO-CB11F10], and [BzPh3P][1-H2N-CB11H11] were determined by single-crystal X-ray diffraction.     

Diazotization of the amino acid [closo-1-CB9H8-1-COOH-6-NH3] and reactivity of the [closo-1-CB9H8-1-COO-6-N2]- anion

A comparative study of the reactivity of dinitrogen acids [closo-1-CB(9)H(8)-1-COOH-10-N(2)] (3[10]) and [closo-1-CB(9)H(8)-1-COOH-6-N(2)] (3[6]) was conducted by diazotization of a mixture of amino acids [closo-1-CB(9)H(8)-1-COOH-6-NH(3)] (1[6]) and [closo-1-CB(9)H(8)-1-COOH-10-NH(3)] (1[10]) with NO(+)BF(4)(-) in the presence of a heterocyclic base (pyridine, 4-methoxypyridine, 2-picoline, or quinoline). The 10-amino acid 1[10] formed an isolable stable 10-dinitrogen acid 3[10], while the 6-dinitrogen carboxylate 3[6](-) reacted in situ, giving products of N-substitution at the B6 position with the heterocyclic solvent (4[6]). The molecular and crystal structures for pyridinium acid 4[6]a were determined by X-ray crystallography. The electronic structures and reactivity of the 6-dinitrogen derivatives of the {1-CB(9)} cluster were assessed computationally at the B3LYP/6-31G(d,p) and MP2/6-31G(d,p) levels of theory and compared to those of the 10-dinitrogen, 2-dinitrogen, and 1-dinitrogen analogues.     

Microwave-assisted Kumada-type cross-coupling reactions of iodinated carba-closo-dodecaborate anions

The microwave-assisted Pd-catalyzed Kumada-type cross-coupling reaction of iodinated carba-closo-dodecaborate anions requires smaller amounts of Grignard reagent and catalyst and results in higher yields in much shorter reaction times in comparison to a reaction with conventional heat transfer. 12-Ph(3)P-closo-1-CB(11)H(11) was identified as the side product of the cross-coupling reactions that use [PdCl(2)(PPh(3))(2)]. The inner salt, which is the first example for a {closo-1-CB(11)} cluster with a B-P bond, was selectively synthesized via a related microwave-assisted cross-coupling protocol and characterized by NMR spectroscopy, elemental analysis, and single-crystal X-ray diffraction. In addition, the crystal structures of the tetraethyl ammonium salts of [12-Ph-closo-1-CB(11)H(11)](-), [12-(4-MeOC(6)H(4))-closo-1-CB(11)H(11)](-), and [12-(H(2)C═(Me)CC≡C)-closo-1-CB(11)H(11)](-) are described.     

Silver-phosphine complexes of the highly methylated carborane monoanion [closo-1-H-CB11Me11]-

The synthesis of the silver(I) salt of the highly methylated carborane anion [closo-1-H-CB(11)Me(11)](-) is described, Ag[closo-1-H-CB(11)Me(11)] 1, which in the solid state shows close intermolecular Ag...H(3)C contacts. Addition of various monodentate phosphines to 1 results in the formation of the complexes (R(3)P)Ag[closo-1-H-CB(11)Me(11)] [R = Ph, 2; cyclohexyl (C(6)H(11)), 3; (3,5-Me(2)-C(6)H(3)), 4]. All these complexes show close intermolecular Ag.H(3)C contacts in the solid state that are considerably shorter than the sum of the van der Waals radius of methyl (2.00 A) and the ionic radius of silver(I) (1.29 A). For 2 and 3 there are other close intermolecular Ag...H(3)C contacts in the solid state, arising from proximate carborane anions in the crystal lattice. Addition of methyl groups to the periphery of the phosphine ligand (complex 4) switches off the majority of these interactions, leaving essentially a single cage interacting with the cationic silver-phosphine fragment through three CH(3) groups. In solution (CD(2)Cl(2)) Ag...H(3)C contacts remain, as evidenced by both the downfield chemical shift change and the significant line-broadening observed for the cage methyl signals. These studies also show that the metal fragment is fluxional over the surface of the cage. The Ag...H(3)C interactions in solution may be switched off by addition of a stronger Lewis base than [closo-1-H-CB(11)Me(11)](-). Thus, addition of [NBu(4)][closo-1-H-CB(11)H(5)Br(6)] to 2 affords (Ph(3)P)Ag[closo-1-H-CB(11)H(5)Br(6)], while adding Et(2)O or PPh(3) affords the well-separated ion-pairs [(Ph(3)P)(L)Ag][closo-1-H-CB(11)Me(11)] (L = OEt(2) 5, PPh(3) 6,) both of which have been crystallographically characterized. DFT calculations on 2 (at the B3LYP/DZVP level) show small energy differences between the possible coordination isomers of this compound, with the favored geometry being one in which the [(Ph(3)P)Ag](+) fragment interacts with three of the [BCH(3)] vertices on the lower surface of the cage, similar to the experimentally observed structure of 4.     

Reductive degradation of nido-1-CB8H12 into smaller-cage carborane systems via new monocarbaboranes [arachno-5-CB8H13](-) and closo-2-CB6H8

Treatment of the nido-1-CB8H12 (1) carborane with NaBH4 in THF at ambient temperature led to the isolation of the stable [arachno-5-CB8H13]- (2(-)), which was isolated as Na+[5-CB8H13]-.1.5 THF and PPh4 +[5-CB8H13]- in almost quantitative yield. Compound 2(-) underwent a boron-degradation reaction with concentrated hydrochloric acid to afford the arachno-4-CB7H13 (3) carborane in 70 % yield, whereas reaction between 2(-) and excess phenyl acetylene in refluxing THF gave the [closo-2-CB6H7]- (4-) in 66 % yield. Protonation of the Cs+4(-) salt with concentrated H2SO4 or CF3COOH in CH2Cl2 afforded a new, highly volatile 2-CB6H8 (4) carborane in 95 % yield, the deprotonation of which with Et3N in CH2Cl2 leads quantitatively to Et3NH+[2-CB6H7](-) (Et3NH+4(-)). Both compounds 4- and 4 can be deboronated through treatment with concentrated hydrochloric acid in CH2Cl2 to yield the carbahexaborane nido-2-CB5H9 (5) in 60 % yield. New compounds 2-, 3, and 4 were structurally characterised by the ab initio/GIAO/MP2/NMR method. The method gave superior results to those carried out using GIAO-HF when relating the calculated 11B NMR chemical shifts to experimental data.     

Syntheses and Vibrational and (13)C MAS-NMR Spectra of Bis(carbonyl)mercury(II) Undecafluorodiantimonate(V) ([Hg(CO)(2)][Sb(2)F(11)](2)) and of Bis(carbonyl)dimercury(I) Undecafluorodiantimonate ([Hg(2)(CO)(2)][Sb(2)F(11)](2)) and the Molecular Structure of [Hg(CO)(2)][Sb(2)F(11)](2)

The synthesis of bis(carbonyl)mercury(II) undecafluorodiantimonate(V), [Hg(CO)(2)][Sb(2)F(11)](2), and that of the corresponding mercury(I) salt [Hg(2)(CO)(2)][Sb(2)F(11)](2) are accomplished by the solvolyses of Hg(SO(3)F)(2) or of Hg(2)F(2), treated with fluorosulfuric acid, HSO(3)F, in liquid antimony(V) fluoride at 80 or 60 degrees C, respectively, in an atmosphere of CO (500-800 mbar). The resulting white solids are the first examples of metal carbonyl derivatives formed by a post-transition element. Both salts are characterized by FT-IR, FT-Raman, and (13)C-MAS-NMR spectroscopy. For [Hg(CO)(2)][Sb(2)F(11)], unprecedentedly high CO stretching frequencies (nu(av) = 2279.5 cm(-)(1)) and stretching force constant (f(r) = 21.0 +/- 0.1) x 10(2) Nm(-)(1)) are obtained. Equally unprecedented is the (1)J((13)C-(199)Hg) value of 5219 +/- 5 Hz observed in the (13)C MAS-NMR spectrum of the (13)C labeled isotopomers at delta = 168.8 +/- 0.1 ppm. The corresponding values (nu(av) = 2247 cm(-)(1), f(r) = (20.4 +/- 0.1) x 10(2) Nm(-)(1), (1)J((13)C-(199)Hg) = 3350 +/- 50 Hz and (2)J((13)C-(199)Hg) 850 +/- 50 Hz) are found for [Hg(2)(CO)(2)][Sb(2)F(11)](2), which has lower thermal stability (decomposition point in a sealed tube is 140 degrees C vs 160 degrees C for the Hg(II) compound) and a decomposition pressure of 8 Torr at 20 degrees C. The mercury(I) salt is sensitive toward oxidation to [Hg(CO)(2)][Sb(2)F(11)](2) during synthesis. Both linear cations (point group D(infinity)(h)()) are excellent examples of nonclassical (sigma-only) metal-CO bonding. Crystal data for [Hg(CO)(2)][Sb(2)F(11)](2): monoclinic, space group P2(1)/n; Z = 2; a = 7.607(2) ?; b = 14.001(3) ?; c = 9.730(2) ?; beta = 111.05(2) degrees; V = 967.1 ?(3); T = 195 K; R(F) = 0.035 for 1983 data (I(o) >/= 2.5sigma(I(o))) and 143 variables. The Hg atom lies on a crystallographic inversion center. The Hg-C-O angle is 177.7(7) degrees. The length of the mercury-carbon bond is 2.083(10) ? and of the C-O bond 1.104(12) ? respectively. The structure is stabilized in the solid state by a number of significant secondary interionic Hg- - -F and C- - -F contacts.     

A study of the sequential acid-catalyzed hydroxylation of dodecahydro-closo-dodecaborate(2-)

The closo-[B12H12-n(OH)n]2- (n = 1-4) ions have been synthesized by the reaction of cesium dodecahydro-closo-dodecaborate(2-), Cs21, with aqueous sulfuric acid. Variation of the reaction temperature, time, and acid concentration results in the stepwise introduction of from one to four hydroxyl groups. Each individual hydroxylation step proceeds regioselectively, affording only one isomer per step. Further substitution of the hydroxylated cluster preferentially takes place at a B-H vertex meta to a B-OH vertex. The closo-[B12H12-n(OH)n]2- (n = 1-4) species, designated 2-5, respectively, are characterized by one- and two-dimensional 11B NMR spectroscopy, IR spectroscopy, and high-resolution fast atom bombardment (FAB) mass spectrometry. A rationale that qualitatively explains the influence of the hydroxyl group on the chemical shifts of the individual boron vertices is developed. Furthermore, the solid state structures of closo-[B12H11(OH)]2-, 2, and closo-1,7-[B12H10(OH)2]2-,3, are determined by X-ray diffraction. Crystallographic data are as follows: For [MePPh3](2)2, monoclinic, space group P2(1)/n, a = 890.1(5) pm, b = 1814(1) pm, c = 1270.5(7) pm, beta = 101.66(2) degrees, Z = 2, R = 0.055; for [MePPh3](2)3, monoclinic, space group P2(1)/n, a = 887.6(4) pm, b = 1847.2(8) pm, c = 1271.1(5) pm, beta = 101.17(1) degrees, Z = 2, R = 0.065. In addition, synthetic routes to O-derivatized species of the anions 2-5 such as closo-[B12H11(OTiCpCl2)]2-, 7, closo-1,7-[B12H10(OTiCpCl2)2]2-, 8, closo-1,7,9-[B12H9(OTiCpCl2)3]2-, 9, closo-[B12H11(OCONHPh)]2-, 10, and closo-1,7-[B12H10(OSO2Me)2]2-, 11, are described. The crystal structures of 7 and 11 are determined by single-crystal X-ray diffraction. Crystallographic data are as follows: For [MePPh3](2)7, monoclinic, space group Cc, a = 2530.5(2) pm, b = 1653.3(1) pm, c = 1281.3(1) pm, beta = 118.79(2) degrees, Z = 4, R = 0.085; for [HPy](2)11, monoclinic, space group P2(1)/n, a = 1550.9(8) pm, b = 993.1(5) pm, c = 1726.5(9) pm, beta = 112.36(2) degrees, Z = 4, R = 0.061.     

Synthesis and structure of Ag(1-Me-12-SiPh3-CB11F10): selective F12 substitution in 1-Me-CB11F11- and the first Ag(arene)4+ tetrahedron

The selective substitution of the antipodal F atom in 1-Me-CB(11)F(11)- with a SiPh(3) moiety led to the isolation and structure determination of the cesium(I) and silver(I) salts of the 1-Me-12-SiPh(3)-CB(11)F(10)- anion. The silver salt contains both a nearly trigonal-planar Ag(arene)(3)+ cation and the first example of a Ag(arene)(4)+ cation.     

Synthesis and Crystal Structure of Nido 11-Vertex Platinaborane [ （PPh3）2PtB10H10-9,10-（H0.7Cl0.3）2]

The reaction of PtCl2（PPh3）2 with closo-[B10H10]^2- in t-BuOH under reflux （70 h） unexpectedly afforded the nido 11-vertex platinaborane [（PPh3）2PtB 10H10-9,10-（H0.7Cl0.3）2] 1, which was characterized by single-crystal X-ray diffraction study. Crystallographic data for 1： C36H41.40B10Cl0.60P2Pt, Mr = 860.49, triclinic system, space group P1, a = 11.255（2）, b = 11.623（2）, c = 17.148（3）A, α = 81.012（2）, β = 88.115（3）, γ=64.322（2）°, V= 1995.4（7）A^3, Z= 2, Dc = 1.432 g/cm^3, μ（MoKα） = 3.662 mm^-1, F（000） = 851, R = 0.0358 and wR = 0.0951. Compound 1 has a nido 11-vertex {PtB10} polyhedral skeleton with the Pt atom lying in the open PtB4 face and further ligating to two PPh3 ligands. 1 is partially chlorinated at positions B（9） and B（10）, and for each chlorine atom an occupancy factor of 0.3 is given by crystallography.     

Restricted rotation in unbridged sandwich complexes: rotational behavior of closo-[Co(eta 5-NC4H4)(C2B9H11)] derivatives

Rotation about the centroid/metal/centroid axis in ferrocene is facile; the activation energy is 1-5 kcal mol(-1). The structurally similar sandwich complexes derived from closo-[3-Co(eta5-NC4H4)-1,2-C2B9H11] (1) have a different rotational habit. In 1, the cis rotamer in which the pyrrolyl nitrogen atom bisects the carboranyl cluster atoms is 3.5 kcal mol(-1) more stable in energy than the rotamer that is second lowest in energy. This cis rotamer is wide, spanning 216 degrees , and may be split into three rotamers of almost equal energy by substituting the N and the carboranyl carbon atoms adequately. To support this statement, closo-[3-Co(eta5-NC4H4)-1,2-(CH3)2-1,2-C2B9H9] (2), closo-[3-Co(eta5-NC4H4)-1,2-(mu-CH2)3-1,2-C2B9H9] 3, 2-->BF3, and 3-->BF3 have been prepared. Two rotamers are found at low temperature for 2-->BF(3) and 3-->BF3. Compounds 2, 3, and 1-->BF3 behave similarly to 1. Rotational energy barriers and the relative populations of the different energy states are calculated from 1H DNMR spectroscopy (DNMR, dynamic NMR). These results agree with those of semiempirical calculations. Without exception, the cis rotamer is energetically the more stable. The fixed conformation of 1 assists in elucidating the rotational preferences of the [3,3'-Co(1,2-C2B9H11)2]- ion in the absence of steric hindrance; the [3,3'-Co(1,2-C2B9H11)2]- ion is commonly accepted to present a cisoid orientation. Complex 1 is electronically similar to the [3,3'-Co(1,2-C2B9H11)2]- ion. Both have heteroatoms in the pi ligands, and they have the same electronegativity difference between the constituent atoms. This leads to a view of the [NC4H4]- as [7,8-C2B9H11]2- ion, with no steric implications. Therefore the [3,3'-Co(1,2-C2B9H11)2]- ion should be considered to have a cisoid structure, and the different rotamers observed to be the result of steric factors and of the interaction of the counterion with either B-H groups and/or ancillary ligands. The rotamer adopted is the one with the atoms holding the negative charges furthest apart.     

Carbonyl-metal fragment insertion into eight-vertex [closo-1-CB7H8]-. Facile synthesis of ten-vertex metalladicarbollide complexes [2,2,2-(CO)3-1-OH-closo-2,1,10-MC2B7H8]n-{M = Fe, Ru (n= 0), Mn, Re (n= 1)}

Insertion of {M(CO)4} fragments (M = Fe, Ru, Mn, Re) into the eight-vertex monocarborane anion [closo-1-CB7H8]- affords ten-vertex metal-dicarbollide complexes.     

Ten-vertex iron-monocarbollide complexes: synthesis and reactivity of the anion [4,9-{Fe(CO)4}-9,9,9-(CO)3-arachno-9,6-FeCB8H11]-

The reagent [arachno-4-CB8H14] reacts with [Fe3(CO)12] in tetrahydrofuran (THF) at reflux temperatures, followed by addition of [N(PPh3)2]Cl, to afford [N(PPh3)2][4,9-{Fe(CO)4}-9,9,9-(CO)3-arachno-9,6-FeCB8H11] (3). In the anion of 3, one iron atom is part of the open CBBFeBB face of a 10-vertex {arachno-9,6-FeCB8} cage, to which the second iron atom is attached via an Fe-Fe bond and an additional exo-polyhedral Fe-B sigma bond. Upon heating 3 in refluxing toluene, the closed 10-vertex species [N(PPh3)2][2,2,2-(CO)3-closo-2,1-FeCB8H9] (4) is obtained, whereas the isomeric compound [N(PPh3)2][6,6,6-(CO)3-closo-6,1-FeCB8H9] (5) is isolated upon heating [closo-4-CB8H9]- and [Fe3(CO)12] in refluxing THF with subsequent addition of [N(PPh3)2]Cl. Protonation of 3 using CF3SO3H in CH2Cl2 gives the charge-compensated compound [4,9-{Fe(CO)4}-4-(mu-H)-9,9,9-(CO)3-arachno-9,6-FeCB8H11] (6), in which the B-Fe sigma bond of the precursor has been converted to a B-H right harpoon-up Fe linkage. In contrast, 3 with {M(PPh3)}+ gives the trimetallic species [1,3,4,9-{MFe(CO)4(PPh3)}-1,3-(mu-H)2-9,9,9-(CO)3-arachno-9,6-FeCB8H9] (M = Cu (7), Ag 8) in which the three metal centers form a V-shaped M-Fe-Fe unit. Compound 6 reacts with PEt3 in the presence of Me(3)NO to yield [4,9-(PEt3)2-9,9-(CO)2-nido-9,6-FeCB8H10] (9). In the latter, the formerly exo-polyhedral {Fe(CO)4} fragment has been replaced by a PEt3 ligand, with a second PEt3 substituting one CO group at the remaining cluster iron vertex. The novel structural features of compounds 3-9 have been confirmed by single-crystal X-ray diffraction studies.     

Macropolyhedral boron-containing cluster chemistry. Cluster assembly about a molybdenum centre. Formation of the 19-vertex [(CO)2MoB16H15C2Ph2]- anion

Fusion of nine-vertex [1-Ph-nido-1-CB8H11] with [Mo(CH3CN)3(CO)3] in the presence of tetramethylnaphthalenediamine gives the nineteen-vertex macropolyhedral metallaborane anion [(CO)2MoB16H15C2Ph2]- with a molybdenum(VI) twelve-atom coordination sphere.     

Two isomeric phosphacarboranes 2,1- and 6,1-PCB(8)H(9), the first representatives of the 10-vertex closo phosphacarborane Series

The reaction between arachno-4-CB(8)H(14) and PCl(3) in the presence of PS (PS = proton sponge = 1,8-dimethylamino naphthalene) (dichloromethane, rt, 24 h) produced the neutral phosphacarborane closo-2,1-PCB(8)H(9) (35% yield), while a similar reaction of nido-1-CB(8)H(12) gave the isomeric compound closo-6,1-PCB(8)H(9) (27% yield). The structures of both compounds were derived on the basis of the combined ab initio/GIAO/NMR ((1)H, (11)B, (13)C) approach. The optimized structures at a correlated level of theory (MP2) with 6-31G* basis set were used as a basis for calculations of the (11)B and (13)C chemical shifts at GIAO-SCF/II and GIAO-MP2/II, the latter showing excellent agreement with experimental data.     

Assembly of a new family of mercury(II) zwitterionic thiolate complexes from a preformed compound [Hg(Tab)2](PF6)2 [Tab = 4-(trimethylammonio)benzenethiolate

Reactions of Hg(OAc)2 with 2 equiv of TabHPF6 [TabH = 4-(trimethylammonio)benzenethiol] in MeCN/MeOH afforded a mononuclear linear complex [Hg(Tab)2](PF6)2 (1). By using 1 as a precursor, a new family of mercury(II) zwitterionic thiolate complexes, [Hg2(Tab)6](PF6)4.2MeCN (2.2MeCN), [Hg(Tab)2(SCN)](PF6) (3), [Hg(Tab)2(SCN)2] (4), [Hg(Tab)I2] (5), {[Hg(Tab)2]4[HgI2][Hg2I6]}(PF6)2(NO3)4 (6), [Hg(Tab)2][HgI4] (7), [Hg(Tab)2][HgCl2(SCN)2] (8), [Tab-Tab]2[Hg3Cl10] (9), and [Hg2(Tab)6]3(PF6)Cl11 (10), were prepared and characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and single-crystal X-ray crystallography. The [Hg2(Tab)6]4+ tetracation of 2 or 10 contains an asymmetrical Hg2S2 rhomb with an inversion center lying on the midpoint of the Hg...Hg line. The Hg atom of the [Hg(Tab)2]2+ dication of 3 is coordinated to one SCN-, forming a rare T-shaped coordination geometry, while in 4, the Hg atom of [Hg(Tab)2]2+ is coordinated to two SCN-, forming a seesaw-shaped coordination geometry. Through weak secondary Hg...S coordinations, each cation in 3 is further linked to afford a one-dimensional zigzag chain. The trigonal [Hg(Tab)I2] molecules in 5 are held together by weak secondary Hg...I and Hg...S interactions, forming a one-dimensional chain structure. In 6, the four [Hg(Tab)2]2+ dications, one HgI2 molecule, one [Hg2I6]2- dianion, one PF6-, and four NO3- anions are interconnected by complicated secondary Hg...I and Hg...O interactions, forming a scolopendra-like chain structure. The secondary Hg...I interactions, [Hg(Tab)2]2+ and [HgI4]2- in 7, are combined to generate a one-dimensional chain structure, while [Hg(Tab)2]2+ and [HgCl2(SCN)2]2- in 8 are interconnected by secondary Hg...N interactions to form a one-dimensional zigzag chain structure. Compound 9 consists of two [Tab-Tab]2+ dications and one [Hg3Cl10]4- tetraanion. The facile approach to the construction of 2-8 and 10 from 1 may be applicable to the mimicking of a coordination sphere of the Hg sites of metallothioneins.