Determination of ofloxacin, norfloxacin, and ciprofloxacin in sewage by selective solid-phase extraction, liquid chromatography with fluorescence detection, and liquid chromatography--tandem mass spectrometry

A solid-phase extraction (SPE) and liquid chromatographic (LC) method was developed for the determination of selected fluoroquinolone (FQ) drugs including ofloxacin, norfloxacin, and ciprofloxacin in municipal wastewater samples. Extraction of the FQs was carried out with a weak cation exchanger SPE cartridge, the Oasis WCX. The cartridge was washed with water and methanol as a cleanup before the FQs were eluted by a mixture of methanol, acetonitrile, and formic acid. Separation of the FQs was achieved by using a Zorbax SB-C8 column under isocratic condition at a flow rate of 0.2mL/min. Recoveries of the FQs in spiked final effluent samples were between 87 and 94% with a relative standard deviation of less than 6%. Several techniques have been evaluated for the detection of FQs in sewage extracts; they included fluorescence detection and electrospray ionization (ESI) mass spectrometry using either mass-selective detection or tandem mass spectrometry (MS/MS). When they were applied to sewage influent and effluent samples, the LC-MS/MS technique operating in the multiple reaction monitoring (MRM) mode proved to be best suited for the determination of FQs in sewage samples as it provided the highest sensitivity (limit of quantification 5ng/L) and selectivity. The observation of signal suppression (matrix effect) for some FQs in ESI LC-MS and LC-MS/MS is discussed and a solution is proposed. The three FQs were detected in all the sewage samples tested in this work, with median concentrations between 34 and 251ng/L.     

Determination of aflatoxin M1 in milk using solid-phase extraction and high-performance liquid chromatography with fluorescence detection

Solid-phase extraction of aflatoxin Ml from milk using Diapak S16M and Diapak S solid-phase extraction cartridges followed by HPLC determination with a Flyuorat-02 fluorescence detector was studied.     

Determination of ofloxacin and lomefloxacin in chicken muscle using molecularly imprinted solid-phase extraction coupled with liquid chromatography

A new molecularly imprinted solid-phase extraction (MISPE) procedure combined with liquid chromatography was developed for the simultaneous selective extraction and determination of ofloxacin (OFL) and lomefloxacin (LOM) in chicken muscle samples. The water-compatible molecularly imprinted microspheres (MIMs) were synthesized by aqueous suspension polymerization using 2-hydroxy-3-naphthoic acid and 1-methylpiperazine as mimic templates. The MIMs applied as selective sorbents in SPE method showed high selectivity and affinity to OFL and LOM in complex biological matrices. Good linearity was obtained in a range of 0.025-2.0 μg/g, and the average recoveries of OFL and LOM at three spiked levels ranged from 94.4 to 96.9%, respectively, with the relative standard deviation ≤4.7%. The developed MISPE-HPLC method was successfully applied to the isolation of OFL and LOM in chicken muscles, which demonstrated the potential ability of the novel MIMs for selective extraction of fluoroquinolones in biological samples.     

Determination of amoxicillin residues in animal tissues by solid-phase extraction and liquid chromatography with fluorescence detection

Trace levels of amoxicillin residues were determined in animal tissues by liquid chromatography (LC) with fluorescence detection. An improved solid-phase extraction (SPE) procedure requiring less flammable solvent (diethyl ether) was developed for sample preparation. Muscle samples of beef, pork, chicken, and tilapia were extracted with a phosphate buffer followed by the modified SPE procedure for cleanup and concentration prior to the LC-fluorescence analysis. Average recoveries of fortified amoxicillin at 5, 10, and 20 micrograms/kg ranged from 83.9 to 85.8% in beef, 86.1 to 88.1% in pork, 81.7 to 82.9% in chicken, and 92.5 to 95.4% in tilapia. Relative standard deviations were < 4%.     

Determination of terfenadine and terfenadine acid metabolite in plasma using solid-phase extraction and high-performance liquid chromatography with fluorescence detection.

This work describes the methodology for the analysis of terfenadine and the acid metabolite of terfenadine in plasma using high-performance liquid chromatography. The use of solid-phase extraction allows the use of robotic or manual sample preparation for the efficient clean-up of terfenadine and terfenadine acid metabolite from plasma. Additional selectivity is obtained through the use of fluorescence detection. For terfenadine, the validated quantitation range of this method is 10.0-84.2 ng/ml with coefficients of variation of 5.7-30%. For terfenadine acid metabolite, the validated quantitation range of this method is 8.2-500 ng/ml with coefficients of variation of 4.1-24%.     

Determination of apramycin in animal feeds by solid-phase extraction and liquid chromatography with precolumn derivatization and fluorescence detection

A high-performance liquid chromatographic method for determining apramycin in animal feeds was developed. Apramycin in feeds was extracted with 0.1 M HCl solution and cleaned up with an MCX solid-phase extraction column. The purified extract was derivatized with o-phthaldehyde, and components were separated on a C18 column and detected with a fluorescence detector. Mass spectrometric data confirmed that apramycin was derivatized at all the 4 primary amines on the apramycin molecule. Average recoveries at 8 included levels (5, 10, 20, 40, 80, 200, 400, and 2000 mg/kg) ranged from 92.2 to 100.5%, and the coefficients of variation were < 6.5%. Standard curves were linear over the range 0.05 to 10 microg/mL. The detection and quantitation limits were determined to be 0.2 and 1.0 mg/kg, respectively.     

Determination of naphthalenesulfonates in water by on-line ion-pair solid-phase extraction and ion-pair liquid chromatography with fast-scanning fluorescence detection

A fast analytical method for quantifying a mixture of 12 naphthalenesulfonates and naphthalenedisulfonates has been developed. This method consists of on-line ion-pair solid-phase extraction with PLRP-s sorbent and ion-pair liquid-chromatography using fast-scanning fluorescence spectrometer as a detection system and multivariate calibration. As complete separation is unnecessary, the compounds were analysed in isocratic conditions and the chromatographic analysis took only 25 min. Three-way partial least-squares (PLS) was used to carry out multivariate calibration for spiked tap water. In these conditions, quantification limits were between 0.01 and 3 μg l⁻¹. Repeatability was also evaluated and relative standard deviations (n=3) were between 0.5 and 4, depending on the compound. Finally, spiked tap and Ebro river waters were analysed to evaluate prediction capability of the method.     

Development of an analytical method for eight fluoroquinolones using solid-phase extraction and liquid chromatography with fluorescence detection

In this study, a practicable and effective analytical method based on solid-phase-extraction and reversed-phase liquid chromatography with fluorescence detection (SPE-LC-FLD) was developed and partially validated for routine analysis of eight FQs in wastewater at the trace level. Different SPE materials, pH conditions and eluents were modified to find an economic and effective SPE conditions. In our work, it is the first time that well-known commercially available SPE sorbent are compared to ‘generic’ cheap SPE sorbent. Aqueous samples (pH 2–3) were extracted using Anpel? MEP cartridges where they were subsequently eluted by 6?mL of 2% formic acid in MeOH. The aqueous extracts were analysed by gradient elution LC-FLD, whose initial mobile phase was composed of ACN and 10?mmol?L^?1 tetrabutyl ammonium bromide (4/96, v/v, pH 3). The LODs and LOQs of the wastewater were as low as 0.32–2.12?ng?L^?1 and 1.07–7.07?ng?L^?1, respectively. The precisions of the overall method (RSD, n?=?3) using wastewater were below 10%. The method was used to quantify FQs in influents and effluents of several typical sewage treatment plants (STPs) in Shanghai. The extraction recoveries of 100?mL influent, 500?mL effluent and 500?mL of river water samples were between 88.6 and 102.6%, 79.2 and 109.2%, 80.0 and 105.5% and 87.4 and 99.4%, respectively. FQs of interest except sarafloxacin were identified in the influents, effluents and river waters with concentrations varying from 0.012–1.163?µg?L^?1, 0.003–0.291?µg?L^?1, and 0.002–0.040?µg?L^?1, respectively. The method can serve as a tool to obtain detailed information on occurrence, behaviour and fate of FQs in the aquatic environment. Occurrence of FQs detected in summer is higher than in spring at STPs, and those detected in the suburban area are less than those in the urban area. Complete removal of FQs is not achieved from the STPs, indicating domestic wastewater and STP discharge is the source of FQs in the surface water.     

Determination of delta 9-tetrahydrocannabinol in plasma using solid-phase extraction and high-performance liquid chromatography with electrochemical detection

A method for the determination of nanogram amounts of delta 9-tetrahydrocannabinol (THC) in plasma and serum is described. THC was quantitatively isolated by solid-phase extraction after addition of an aqueous solution of urea and methanol to the sample. The extracts were analysed by high-performance liquid chromatography with electrochemical detection in the oxidizing mode. The detection limit of THC is ca. 100 pg for a signal-to-noise ratio of 3. With this method, levels of 2 ng/ml of THC in plasma can be measured.     

Determination of amphetamines in human urine by liquid chromatography with fluorimetric detection using a solid-phase extraction procedure

A precise and feasible HPLC method has been developed for the analysis of amphetamine (AMPH), methamphetamine (MAMPH) and methylenedioxymethamphetamine (MDMA, ecstasy) in human urine. A chromatographic run on a C8 Genesis (150 mm x 4.6 mm, 5 microm) column maintained at 30 degrees C lasts about 17 min, using a mobile phase composed of ACN (12%) and a pH 2.5 phosphate buffer (88%) containing 0.3% triethylamine. Mirtazapine was used as the internal standard. Good linearity was found in the 100-2000 ng/mL concentration range for AMPH and MAMPH and in the 12-2000 ng/mL concentration range for MDMA. The pretreatment of urine samples was carried out by means of a careful SPE procedure on C2 cartridges. The extraction yields were very satisfactory for all analytes, with average values greater than 97%. The leading conditions allowed the determination of AMPH, MAMPH and MDMA with satisfactory precision and accuracy. The method has been successfully applied to the determination of the analytes in urine of AMPH users.     

Determination of Olanzapine in rat brain using liquid chromatography with coulometric detection and a rapid solid-phase extraction procedure

A sensitive and selective method was developed for the determination of the antipsychotic drug Olanzapine levels in rat brain tissue, based on HPLC with electrochemical detection. The analyses were carried out on a C8 reversed phase column (150 mm x 4.6 mm, 5 microm), using a mobile phase composed of methanol and a phosphate buffer (44.0 mM, pH 3.5), containing triethylamine (21:79, v/v), flowing at 1.2 mL min(-1). A high sensitivity coulometric detection analytical cell containing two flow-through low volume working electrodes was used: electrode 1 was set at +0.350 V and electrode 2 at -0.200 V. Olanzapine, administered to rats in different doses or in different times, was extracted from tissue homogenate of either the whole brain or specific areas (cortex, hyppocampus, nucleus striatum) with a rapid solid phase extraction procedure (SPE) on Oasis HLB cartridges. The method provided a high extraction yield of Olanzapine and internal standard (2-methylolanzapine) from brain tissue homogenate with absolute recovery values higher than 90.0%. The detector response was linear over a concentration range of 0.2-100.0 ng mL(-1) of Olanzapine. The limit of quantification (LOQ) was 0.2 ng mL(-1). Precision results, expressed by the intra-day and the inter-day relative standard deviation values, were satisfactory, better than 4.6%. Accuracy was satisfactory as well. This method proved to be suitable for the analysis of Olanzapine in rat brain tissues and for the study of distribution and pharmacokinetics of Olanzapine in rat brain after a single treatment with the antipsychotic drug.     

Determination of paraquat in rat brain using ion-pair solid-phase extraction and reversed-phase high-performance liquid chromatography with ultraviolet detection

A simple and sensitive procedure for the measurement of N-methylisoquinolinium ion (NMIQ+), a putative neurotoxin, was devised using high-performance liquid chromatography (HPLC) with fluorescence detection. Separation of NMIQ+ was carried out by gel filtration and reversed-phase HPLC on a column of hydrophilic polymer gels (Asahipak GS-302H). The method was sensitive enough to measure 50 fmol of NMIQ+. Uptake of NMIQ+ into rat striatal slices was confirmed by this method.     

Direct determination of codeine-6-glucuronide in plasma and urine using solid-phase extraction and high-performance liquid chromatography with fluorescence detection

A sensitive and selective method was developed for the direct determination of codeine-6-glucuronide in plasma and urine using high-performance liquid chromatography (HPLC) with fluorescence detection. Codeine-6-glucuronide was synthesised and its purity estimated using acid and enzyme hydrolysis. The hydrolysis of codeine-6-glucuronide by beta-glucuronidase was incomplete and urine reduced the extent of hydrolysis. Codeine-6-glucuronide was recovered from plasma using a solid-phase extraction column and separated on a reversed-phase C18 HPLC column. The assay showed good reproducibility and accuracy (within 10%), and standard curves were linear between 32 and 1600 ng/ml in plasma and between 0.32 and 160 micrograms/ml in urine. The assay has been applied to the study of the pharmacokinetics and metabolism of codeine in patients.     

Determination of quinolones in water samples by solid-phase extraction and liquid chromatography with fluorimetric detection

A method is reported for the determination, in water samples, of 10 quinolones which are used as veterinary drugs. Analytes are isolated from samples by solid-phase extraction (SPE) and analysed by reversed-phase high-performance liquid chromatography using fluorimetric detection. A solid-phase extraction procedure based on retention on HBL OASIS cartridges and elution with a mixture of acetonitrile-water in basic medium is suitable for pre-concentration of the analytes. Pre-concentration factors up to 250 can be obtained. The quinolones are separated with an octyl silica-based column and mobile phases consisting of aqueous oxalic acid solutions and acetonitrile mixtures. The attained detection limits of the whole process are in the ng l(-1) level when 250 ml of water sample is processed. Recovery rates, from natural water samples spiked at 2060 ng l(-1) level, range from 70 to 100% and common standard deviation are about 6-12%.     

Determination of clozapine in human plasma by solid-phase extraction and liquid chromatography with amperometric detection

Summary A sensitive and selective high-performance liquid chromatographic method has been developed for monitoring clozapine levels in human plasma. Chromatography was performed on a reversed-phase column (C₈, 150 mm×4.6 mm i.d., 5 μm) with acetonitrile-aqueous sodium acetate solution, 88∶12 (v/v), as mobile phase; the flow rate was 1 mL min⁻¹. Clozapine oxidation at +800 mV was detected amperometrically. Response was linearly dependent on concentration over the range 50–1500 ng mL⁻¹ clozapine in plasma. Sample preparation by solid-phase extraction before HPLC analysis gave high extraction yield (94%). The accuracy and precision of the method were both very good (recovery: 97%;RSD<3.3%).     

Determination of benzimidazole fungicides in soil samples using microwave-assisted micellar extraction and liquid chromatography with fluorescence detection

A simple and fast analytical method was developed for the determination of benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in soil samples. The analytes were extracted from the soil samples by means of conventional microwave-assisted extraction, using the non-ionic surfactants polyoxyethylene 10 lauryl ether (POLE) and oligoethylene glycol monooalkyl ether (Genapol X-080) as extractants. Determinations were made by using liquid chromatography with direct fluorescence detection. The use of an analytical column Symmetry C-18 offered short retention times of analytes without the need of any pH regulators with mobile phase methanol-water (50 + 50, v/v). The best results were obtained using 5% (v/v) POLE as extractant with recoveries of the fungicides in spiked soil samples between 71 and 105%. The results were compared with those obtained when Soxhlet extraction was applied to the same soil samples.     

Determination of bisphenols in sewage based on supramolecular solid-phase extraction/liquid chromatography/fluorimetry

Supramolecular sorbents (hemimicelles/admicelles) are proposed for the extraction/preconcentration of bisphenols from aqueous environmental samples prior to their liquid chromatography/fluorimetric determination. A comparative study on the use of cetyltrimethylammonium bromide (CTABr)-coated silica and sodium dodecyl sulphate (SDS)-coated gamma-alumina as sorbent materials, is presented. Bisphenol A (BPA) and bisphenol F (BPF) were quantitatively retained on CTABr admicelles. Addition of tetrabutylammonium chloride (TBAC) to water samples was required to completely retain bisphenols on SDS-gamma-alumina. Retention on both sorbents occurred through hydrophobic and pi-cation interactions between the quaternary ammonium head group of the cationic amphiphile (CTABr or TBAC) and the aromatic rings of the target analytes. TBAC-SDS-gamma-alumina was the sorbent selected for the SPE of bisphenols on the basis of the lower elution volume required (1 ml of methanol) and the greater breakthrough volume allowed (400 ml), which permitted to reach practical detection limits of 10 and 15 ng/l for BPF and BPA, respectively. The proposed method was used to quantify bisphenol A and bisphenol B in wastewater samples from four sewage treatment plants. Recoveries obtained ranged between about 99 and 105% for raw wastewater and between 96 and 106% for treated wastewater.     

Simultaneous determination of phenolic xenoestrogens by solid-phase extraction and high-performance liquid chromatography with fluorescence detection.

A highly sensitive and selective method for simultaneous determination of some hydroxyl group-containing endocrine disruptors, including bisphenol A (BPA), bisphenol B (BPB), bisphenol E (BPE), bisphenol F (BPF) and 4-nonylphenol (4-NP), was developed. The method consists of precolumn derivatization of the analytes, solid-phase extraction (SPE) and subsequent chromatographic analysis by high-performance liquid chromatography (HPLC) with fluorescence detection. 4,4'-Cyclohexylidenebisphenol (BPZ) was used as an internal standard. Derivatization was carried out using 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl) as a label. Parameters of the derivatization reaction (temperature, time, concentration of reagent, stability, etc.) and of the solid-phase extraction (recovery, solvent, etc.) were studied in detail. Detection limits of compounds studied in standard solutions ranged from 0.08-1.3 ppb (ng/ml). The proposed method was successfully applied to plastic samples; BPA was found in both polycarbonate and polyvinyl chloride plastics, while 4-NP was found in plastics made of polyvinyl chloride and another polymer.