Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

Functionalized CdS quantum dots-based luminescence probe for detection of heavy and transition metal ions in aqueous solution

Strong luminescence CdS quantum dots (QDs) have been prepared and modified with l-cysteine by a facile seeds-assistant technique in water. They are water-soluble and highly stable in aqueous solution. CdS QDs evaluated as a luminescence probe for heavy and transition metal (HTM) ions in aqueous solution was systematically studied. Five HTM ions such as silver(I) ion, copper(II) ion, mercury(II) ion, cobalt(II) ion, and nickel(II) ion significantly influence the photophysics of the emission from the functionalized CdS QDs. Experiment results showed that the fluorescence emission from CdS QDs was enhanced significantly by silver ion without any spectral shift, while several other bivalent HTM ions, such as Hg(2+), Cu(2+), Co(2+), and Ni(2+), exhibited effective optical quenching effect on QDs. Moreover, an obvious red-shift of emission band was observed in the quenching of CdS QDs for Hg(2+) and Cu(2+) ions. Under the optimal conditions, the response was linearly proportional to the concentration of Ag(+) ion ranging from 1.25 x 10(-7) to 5.0 x 10(-6)molL(-1) with a detection limit of 2.0 x 10(-8)molL(-1). The concentration dependence of the quenching effect on functionalized QDs for the other four HTM ions could be well described by typical Stern-Volmer equation, with the linear response of CdS QDs emission proportional to the concentration ranging from 1.50 x 10(-8) to 7.50 x 10(-7)molL(-1) for Hg(2+) ion, 3.0 x 10(-7) to 1.0 x 10(-5)molL(-1) for Ni(2+) ion, 4.59 x 10(-8) to 2.295 x 10(-6)molL(-1) for Cu(2+) ion, and 1.20 x 10(-7) to 6.0 x 10(-6)molL(-1) Co(2+) ion, respectively. Based on the distinct optical properties of CdS QDs system with the five HTM ions, and the relatively wide linear range and rapid response to HTM ions, CdS QDs can be developed as a potential identified luminescence probe for familiar HTM ions detection in aqueous solution.     

The characterization for the binding of calcium and terbium to Euplotes octocarinatus centrin

Centrin is a member of the EF-hand superfamily that plays critical role in the centrosome duplication and separation. In the present paper, we characterized properties of metal ions binding to Euplotes octocarinatus centrin (EoCen) by fluorescence spectra and circular dichroism (CD) spectra. Changes of fluorescence spectra and alpha-helix contents of EoCen proved that Tb(3+) and Ca(2+) induced great conformational changes of EoCen resulting in exposing hydrophobic surfaces. At pH 7.4, Ca(2+) (and Tb(3+)) bond with EoCen at the ratio of 4:1. Equilibrium experiment indicated that Ca(2+) and Tb(3+) exhibited different binding capabilities for C- and N-terminal domains of protein. C-terminal domain bond with Ca(2+) or Tb(3+) approximately 100-fold more strongly than N-terminal. Aromatic residue-sensitized Tb(3+) energy transfer suggested that site IV bond to Tb(3+) or Ca(2+) more strongly than site III. Based on fluorescence titration curves, we reckoned the conditional binding constants of EoCen site IV quantitatively to be K(IV)=(1.23+/-0.51)x10(8)M(-1) and K(IV)=(6.82+/-0.33)x10(5)M(-1) with Tb(3+) and Ca(2+), respectively. Metal ions bond to EoCen in the order of IV>III>II, I.     

5-Hydroxytryptamino-induced calcium sparks in cultured rat stomach fundus smooth muscle cells

With the imaging fluorescence probe of Ca2+ (fluo-3) and a laser scanning confocal micro-scope, the spontaneous localized calcium release event was first discovered in resting rat cardiac myocytes by Cheng[1] in 1993. A mathematical simulation is developed with computer in order to reveal the effect, which is immediately suggested that these events are likely to reflect the local-ized release of Ca2+ from a small cluster of ryanodine-sensitive Ca2+ release channels in sar-coplasmic reticulum …     

Development of a far-red to near-infrared fluorescence probe for calcium ion and its application to multicolor neuronal imaging

To improve optical imaging of Ca(2+) and to make available a distinct color window for multicolor imaging, we designed and synthesized CaSiR-1, a far-red to near-infrared fluorescence probe for Ca(2+), using Si-rhodamine (SiR) as the fluorophore and the well-known Ca(2+) chelator BAPTA. This wavelength region is advantageous, affording higher tissue penetration, lower background autofluorescence, and lower phototoxicity in comparison with the UV to visible range. CaSiR-1 has a high fluorescence off/on ratio of over 1000. We demonstrate its usefulness for multicolor fluorescence imaging of action potentials (visualized as increases in intracellular Ca(2+)) in brain slices loaded with sulforhodamine 101 (red color; specific for astrocytes) that were prepared from transgenic mice in which some neurons expressed green fluorescent protein.     

An extremely stable host-guest complex that functions as a fluorescence probe for calcium ions

Herein, we report a crown ether based molecular cage that forms extremely stable supramolecular complexes with dimethyldiazapyrenium (DMDAP) ions in CD(3)CN through the collaboration of multiple weak C-HO hydrogen bonds. The very strong binding affinity in this host-guest system allows the molecular cage to bleach the fluorescence signal of DMDAP substantially in equimolar solutions at concentrations as low as 1 x 10(-5) M. Remarkably, a 1x10(-5) M equimolar solution of the molecular cage and DMDAP is highly selective toward Ca(2+) ions-relative to other biologically important Li(+), Na(+), K(+), and Mg(2+) ions-and causes a substantial increase in the fluorescence intensity of the solution. As a result, this molecular cage/DMDAP complex behaves as a supramolecular fluorescence probe for the detection of Ca(2+) ions in solution.     

用荧光葡聚糖研究大麦细胞电融合

利用阴离子表面活性物质荧光葡聚糖 (F DX)研究了表面活性物质对大麦细胞电融合的影响 .结果表明 ,F DX可抑制电融合过程 .对放置过大麦细胞原生质体的F DX溶液 ,在荧光显微镜下可观察到其膜表面的荧光圈 ,证明F DX在膜上的吸附 .添加F DX可增加原生质体的电泳速度 ,说明吸附后原生质体表面负电荷增多 .由于相互间静电斥力的增强 ,使细胞的电融合率下降 .此外 ,还利用荧光显微技术研究了细胞电生孔现象 .观察到经电脉冲后溶液中的F DX可进入原生质体内部 ,间接证明了细胞电生孔的存在 .     

Ionophoric properties of atropine: complexation and transport of Na+, K+, Mg2+ and Ca2+ ions across a liquid membrane

The activity of atropine on the complexation and transport of Na(+), K(+), Mg(2+) and Ca(2+) ions across a liquid membrane was investigated using a spectrophotometric method. Atropine is a natural drug that blocks muscarinic receptors. It is a competitive antagonist of the action of acetylcholine and other muscarinic agonists. Atropine is shown to extract Na(+), K(+), Mg(2+) and Ca(2+) ions from an aqueous phase into an organic one with a preference for Ca(2+) ions. According to a kinetic study, divalent cations (Mg(2+) and Ca(2+)) are more rapidly transported than monovalent ones (Na(+) and K(+)). In both complexation and transport, the flux of the ions increases with the increase of atropine concentration. Atropine might act on the membrane permeability; its complexation and ionophoric properties shed new lights on its therapeutic properties.     

ZP8, a neuronal zinc sensor with improved dynamic range; imaging zinc in hippocampal slices with two-photon microscopy

The synthesis of a difluorofluorescein monocarboxaldehyde platform and its use for preparing ZP8, a new member of the Zinpyr family of neuronal Zn(2+) sensors, are described. By combining an aniline photoinduced electron transfer (PET) switch and an electron-withdrawing fluorescein scaffold, ZP8 displays reduced background fluorescence and improved dynamic range compared to previous ZP probes. The bright sensor undergoes an 11-fold increase in fluorescence intensity upon Zn(2+) complexation (Phi = 0.03-0.35) with high selectivity over cellular concentrations of Ca(2+) and Mg(2+). In addition, sensors in the ZP family have been utilized for optical imaging in biological samples using two-photon microscopy (TPM). The cell-permeable ZP3 probe is capable of identifying natural pools of labile Zn(2+) within the mossy fiber synapses of live hippocampal slices using TPM, establishing the application of this technique for monitoring endogenous Zn(2+) stores.     

Photosensitization reaction-induced acute electrophysiological cell response of rat myocardial cells in short loading periods of talaporfin sodium or porfimer sodium

Electrophysiological responses of rat myocardial cells to exogenous photosensitization reactions for a short period of incubation with two photosensitizers, talaporfin sodium or porfimer sodium, were measured in a subsecond time scale. The loading period of the photosensitizer when the photosensitizer might not be taken up by the cells was selected as 15min, which was determined by the fluorescence microscopic observation. We measured the intracellular Ca(2+) concentration ([Ca(2+) ](in) ) by using a fluorescent Ca(2+) indicator, Fluo-4 AM, under a high-speed confocal laser microscope to evaluate the acute electrophysiological cell response to the photosensitization reaction. The measured temporal change in Fluo-4 fluorescence intensity indicated that the response to the photosensitization reaction might be divided into two phases in both photosensitizers. The first phase is acute response: disappearance of Ca(2+) oscillation when irradiation starts, which might be caused by ion channel dysfunction. The second phase is slow response: [Ca(2+) ](in) elevation indicating influx of Ca(2+) due to the concentration gradient. The continuous Ca(2+) influx followed by changes in cell morphology suggested micropore formation on the surface of the cell membrane, resulting in necrotic cell death.     

Salicylimine-based fluorescent chemosensor for aluminum ions and application to bioimaging

In this study, an assay to quantify the presence of aluminum ions using a salicylimine-based receptor was developed utilizing turn-on fluorescence enhancement. Upon treatment with aluminum ions, the fluorescence of the sensor was enhanced at 510 nm due to formation of a 1:1 complex between the chemosensor and the aluminum ions at room temperature. As the concentration of Al(3+) was increased, the fluorescence gradually increased. Other metal ions, such as Na(+), Ag(+), K(+), Ca(2+), Mg(2+), Hg(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Pb(2+), Cr(3+), Fe(3+), and In(3+), had no such significant effect on the fluorescence. In addition, we show that the probe could be used to map intracellular Al(3+) distribution in live cells by confocal microscopy.     

Optical sensing quantum dot-labeled polyacrolein particles prepared by layer-by-layer deposition technique

Optical sensing polymer particles with tailored semiconductor nanocrystal (QD) loading are prepared by layer-by-layer deposition technique (LbL). Polyacrolein particles of 1.2 μm diameter are used as solid support for deposition of hydrophilic CdSe/ZnS nanocrystal/polyelectrolyte multilayers formed by electrostatic interactions. The pH-dependent fluorescence of QDs and pH-dependent conformations of polyelectrolytes, which likely passivate the surface state of nanocrystals, allow a creation of both mono- and multiplex coded polymer particles with pH-dependent fluorescence intensity. Bovine serum albumin (BSA) as outermost layer makes it possible to design the optical sensing polymer particles with reversibly responded fluorescence at pH variations. The fluorescence of such polymer particles with BSA outer layer is sensitive to copper(II) ion while the fluorescence of these particles is practically insensitive to the other divalent cations (Zn(2+), Ca(2+), Ba(2+), Co(2+), Mg(2+)). The detection limit of Cu(2+) is about 15 nM. Adaptation of LbL method to prepare QD-labeled polymer particles with enhanced complexity (e.g. several types of QDs, multiple biofunctionality) is expected to open new opportunities in biotechnological applications.     

Calcium rubies: a family of red-emitting functionalizable indicators suitable for two-photon ca(2+) imaging

We designed Calcium Rubies, a family of functionalizable BAPTA-based red-fluorescent calcium (Ca(2+)) indicators as new tools for biological Ca(2+) imaging. The specificity of this Ca(2+)-indicator family is its side arm, attached on the ethylene glycol bridge that allows coupling the indicator to various groups while leaving open the possibility of aromatic substitutions on the BAPTA core for tuning the Ca(2+)-binding affinity. Using this possibility we now synthesize and characterize three different CaRubies with affinities between 3 and 22 μM. Their long excitation and emission wavelengths (peaks at 586/604 nm) allow their use in otherwise challenging multicolor experiments, e.g., when combining Ca(2+) uncaging or optogenetic stimulation with Ca(2+) imaging in cells expressing fluorescent proteins. We illustrate this capacity by the detection of Ca(2+) transients evoked by blue light in cultured astrocytes expressing CatCh, a light-sensitive Ca(2+)-translocating channelrhodopsin linked to yellow fluorescent protein. Using time-correlated single-photon counting, we measured fluorescence lifetimes for all CaRubies and demonstrate a 10-fold increase in the average lifetime upon Ca(2+) chelation. Since only the fluorescence quantum yield but not the absorbance of the CaRubies is Ca(2+)-dependent, calibrated two-photon fluorescence excitation measurements of absolute Ca(2+) concentrations are feasible.     

Development of a cholesterol-conjugated fluorescent sensor for site-specific detection of zinc ion at the plasma membrane

A cholesterol-conjugated fluorescence Zn(2+) sensor based on the fluorescein platform was designed and synthesized. The cholesterol moiety is essential for localizing the Zn(2+) sensor to the cell membrane, allowing the sensor to probe changes in the Zn(2+) concentration in a localized area of the cell.     

新型钙荧光探针在H2O2对HL-60胞浆钙影响研究中的应用

采用H2O2、黄嘌呤和黄嘌呤氧化酶、H2O2/抗坏血酸/Fe^2＋（或H2O2/Fe^＋）、H2O2和辣根过氧化酶（HRP）等不同活性氧产生体系,对自行合成的胞浆特异性钙荧光探针STDIn的活性氧耐受性进行了考察.以STDIn-AM为探针标记HL-60细胞,激光共聚焦技术检测单细胞内Ca^2＋-STDIn荧光强度的变化;探讨了不同浓度的H2O2对胞内Ca^2＋浓度变化的影响,从膜结构和生物信号传导的角度研究了氧自由基对培养细胞的生物效应.     

Divalent cation-induced cluster formation by polyphosphoinositides in model membranes

Polyphosphoinositides (PPIs) and in particular phosphatidylinositol-(4,5)-bisphosphate (PI4,5P2), control many cellular events and bind with variable levels of specificity to hundreds of intracellular proteins in vitro. The much more restricted targeting of proteins to PPIs in cell membranes is thought to result in part from the formation of spatially distinct PIP2 pools, but the mechanisms that cause formation and maintenance of PIP2 clusters are still under debate. The hypothesis that PIP2 forms submicrometer-sized clusters in the membrane by electrostatic interactions with intracellular divalent cations is tested here using lipid monolayer and bilayer model membranes. Competitive binding between Ca(2+) and Mg(2+) to PIP2 is quantified by surface pressure measurements and analyzed by a Langmuir competitive adsorption model. The physical chemical differences among three PIP2 isomers are also investigated. Addition of Ca(2+) but not Mg(2+), Zn(2+), or polyamines to PIP2-containing monolayers induces surface pressure drops coincident with the formation of PIP2 clusters visualized by fluorescence, atomic force, and electron microscopy. Studies of bilayer membranes using steady-state probe-partitioning fluorescence resonance energy transfer (SP-FRET) and fluorescence correlation spectroscopy (FCS) also reveal divalent metal ion (Me(2+))-induced cluster formation or diffusion retardation, which follows the trend: Ca(2+) ? Mg(2+) > Zn(2+), and polyamines have minimal effects. These results suggest that divalent metal ions have substantial effects on PIP2 lateral organization at physiological concentrations, and local fluxes in their cytoplasmic levels can contribute to regulating protein-PIP2 interactions.     

A flow cytometric assay technology based on quantum dots-encoded beads

A flow cytometric detecting technology based on quantum dots (QDs)-encoded beads has been described. Using this technology, several QDs-encoded beads with different code were identified effectively, and the target molecule (DNA sequence) in solution was also detected accurately by coupling to its complementary sequence probed on QDs-encoded beads through DNA hybridization assay. The resolution of this technology for encoded beads is resulted from two longer wavelength fluorescence identification signals (yellow and red fluorescent signals of QDs), and the third shorter wavelength fluorescence signal (green reporting signal of fluorescein isothiocyanate (FITC)) for the determination of reaction between probe and target. In experiment, because of QDs’ unique optical character, only one excitation light source was needed to excite the QDs and probe dye FITC synchronously comparing with other flow cytometric assay technology. The results show that this technology has present excellent repeatability and good accuracy. It will become a promising multiple assay platform in various application fields after further improvement.     

表面修饰CdTe量子点的合成及其光学特性

在水相中合成高发光性能的CdTe量子点,研究以巯基乙酸(TGA)为稳定剂对CdTe表面进行修饰,制备在水中分散性良好的纳米晶,通过对CdTe量子点合成反应条件的摸索,掌握了其合成的反应规律.同时用紫外分光光度计、荧光分光光度计和透射电子显微镜对其进行了表征.结果表明,回流时间、n(Cd²⁺):n(HTe^-)、反应物浓度、TGA用量、反应体系pH值,对纳米晶的光学性质具有显著影响.回流2 h制得的CdTe纳米粒子直径约为5 nm,其发射峰窄且对称,表现出良好稳定的光学性质.     

Aqueous synthesis of type-II core/shell CdTe/CdSe quantum dots for near-infrared fluorescent sensing of copper(II)

Type-II core/shell CdTe/CdSe quantum dots (QDs) were synthesized in aqueous medium by employing thiol-capped CdTe QDs as core template and CdCl(2) and Na(2)SeSO(3) as shell precursors, respectively. Compared with the original CdTe cores, the core/shell CdTe/CdSe QDs showed an obvious red-shifted emission with the color-tune capability to the near-infrared (NIR) wavelength, because of the formation of an indirect excitation. The prepared QDs exhibited high stability and moderate fluorescence quantum yields (10-20%), and their core/shell heterostructure was characterized by UV-vis absorption, steady-state and time-resolved fluorescence spectra, X-ray powder diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. The fluorescence of the core/shell QDs could be markedly quenched by Cu(II), and approximate concentrations of other physiologically important cations, such as Zn(II), Ca(II), Na(I) and K(I) etc., had no effect on the fluorescence. Based on this, a simple and rapid method for Cu(II) determination was proposed using the NIR CdTe/CdSe QDs as fluorescent probes. Under optimal conditions, the response was linearly proportional to the concentration of Cu(II) between 0.05 to 50.0 x 10(-6) mol L(-1), the limit of detection was 2.0 x 10(-8) mol L(-1). The developed method was successfully applied to the detection of trace Cu(II) in real samples.     

Magic sized ZnS quantum dots as a highly sensitive and selective fluorescence sensor probe for Ag+ ions

A green and simple chemical synthesis of magic sized water soluble blue-emitting ZnS quantum dots (QDs) has been accomplished by reacting anhydrous Zn acetate, sodium sulfide and thiolactic acid (TLA) at room temperature in aqueous solution. Refluxing of this mixture in open air yielded ZnS clusters of about 3.5 nm in diameter showing very strong and narrow photoluminescence properties with long stability. Refluxing did not cause any noticeable size increment of the clusters. As a result, the QDs obtained after different refluxing conditions showed similar absorption and photoluminescence (PL) features. Use of TLA as a capping agent effectively yielded such stable and magic sized QDs. The as-synthesized and 0.5 h refluxed ZnS QDs were used as a fluorescence sensor for Ag(+) ions. It has been observed that after addition of Ag(+) ions of concentration 0.5-1 μM the strong fluorescence of ZnS QDs was almost quenched. The quenched fluorescence can be recovered by adding ethylenediamine to form a complex with Ag(+) ions. The other metal ions (K(+), Ca(2+), Au(3+), Cu(2+), Fe(3+), Mn(2+), Mg(2+), Co(2+)) showed little or no effect on the fluorescence of ZnS QDs when tested individually or as a mixture. In the presence of all these ions, Ag(+) responded well and therefore ZnS QDs reported in this work can be used as a Ag(+) ion fluorescence sensor.