Three-dimensional quantitative structure-property relationship (3D-QSPR) models for prediction of thermodynamic properties of polychlorinated biphenyls (PCBs): enthalpy of vaporization

Three-dimensional Quantitative Structure-Property Relationship (QSPR) models have been derived using Comparative Molecular Field Analysis (CoMFA) to correlate the vaporization enthalpies of a representative set of polychlorinated biphenyls (PCBs) at 298.15 K with their CoMFA-calculated physicochemical properties. Various alignment schemes, such as inertial, as is, and atom fit, were employed in this study. The CoMFA models were also developed using different partial charge formalisms, namely, electrostatic potential (ESP) charges and Gasteiger-Marsili (GM) charges. The most predictive model for vaporization enthalpy (Delta(vap)H(m)(298.15 K)), with atom fit alignment and Gasteiger-Marsili charges, yielded r2 values 0.852 (cross-validated) and 0.996 (conventional). The vaporization enthalpies of PCBs increased with the number of chlorine atoms and were found to be larger for the meta- and para-substituted isomers. This model was used to predict Delta(vap)H(m)(298.15 K) of the entire set of 209 PCB congeners.     

The boiling point and molar enthalpy of vaporization of fluorint FC-70 N(C5F11)3

N(C₅F₁₁)₃ (Fluorint FC-70) has been chosen as the test material to compare the chemicophysical data obtained by static-sample and DSC methods. The normal boiling point, the molar enthalpy of vaporization, and the constants of the Antoine equation of fluorint FC-70 are reported. DSC can be developed into a simple and rapid routine instrument to determine the enthalpy of vaporization as well as the boiling point of liquid, particularly at relative high temperature.     

Solubility of pentane, 2-methylbutane,and cyclopentane in liquid nitrogen at 77.4 K

The solubilities of pentane, 2-methylbutane (isopentane) and cyclopentane were measured in liquid nitrogen at 77.4 K by the filtration method. The solubilities of the C₅ hydrocarbons in liquid nitrogen at 77.4 K vary from 1.8×10^–8 mole fraction for cyclopentane, to 3.0×10^–8 mole fraction for pentane and 3.2×10^–7 mole fraction for 2-metylbutane. Correlations between the solubilities of alkanes, alkenes and cyclic hydrocarbons in liquid nitrogen, and some properties of solutes [normal boiling point T _b , enthalpy of vaporization at normal boiling point H _b and the mean of the enthalpy of vaporization and the enthalpy of melting [(H _b +H _m )/2] are presented.     

Three-dimensional quantitative structure-property relationship (3D-QSPR) models for prediction of thermodynamic properties of polychlorinated biphenyls (PCBs): enthalpies of fusion and their application to estimates of enthalpies of sublimation and aqueous solubilities

Comparative Molecular Field Analysis (CoMFA) has been used to develop three-dimensional quantitative structure-property relationship (3D-QSPR) models for the fusion enthalpy at the melting point (Delta(fus)H(m)(T(fus))) of a representative set of polychlorinated biphenyls (PCBs). Various alignment schemes, such as inertial, as is, atom fit, and field fit, were used in this study to evaluate the predictive capabilities of the models. The CoMFA models have also been derived using partial atomic charges calculated from the electrostatic potential (ESP) and Gasteiger-Marsili (GM) methods. The combination of atom fit alignment and GM charges yielded the greatest self-consistency (r(2) = 0.955) and internal predictive ability (r(cv)(2) = 0.783). This CoMFA model was used to predict Delta(fus)H(m)(T(fus)) of the entire set of 209 PCB congeners, including 193 PCB congeners for which experimental values are unavailable. The CoMFA-predicted values, combined with previous estimations of vaporization and sublimation enthalpies, were used to construct a thermodynamic cycle that validated the internal self-consistency of the predictions for these three thermodynamic properties. The CoMFA-predicted values of fusion enthalpy were also used to calculate aqueous solubilities of PCBs using Mobile Order and Disorder Theory. The agreement between calculated and experimental values of solubility at 298.15 K, characterized by a standard deviation of +/- 0.41 log units, demonstrates the utility of CoMFA-predicted values of fusion enthalpies to calculate aqueous solubilities of PCBs.     

Determination of 3-MCPD by GC-MS/MS with PTV-LV injector used for a survey of Spanish foodstuffs

3-Monochloropropane-1,2-diol (3-MCPD) is the most common chemical contaminant of the group of chloropropanols. It can occur in foods and food ingredients at low levels as a result of processing, migration from packaging materials during storage and domestic cooking. A sensitive method for determination of 3-MCPD in foodstuffs using programmable temperature vaporization (PTV) with large-volume injection (LVI) gas chromatography (GC) with tandem mass spectrometry detection (MS/MS) has been developed and optimized. The optimization of the injection and detection parameters was carried out using statistical experimental design. A Plackett-Burman design was used to estimate the influence of resonance excitation voltage (REV), isolation time (IT), excitation time (ET), ion source temperature (IST), and electron energy (EE) on the analytical response in the ion trap mass spectrometer (ITMS). Only REV was found to have a statically significant effect. On the other hand, a central composite design was used to optimize the settings of injection temperature (T(inlet)), vaporization temperature (T(vap)), vaporization time (t(vap)) and flow (Flow). The optimized method has an instrumental limit of detection (signal-to-noise ratio 3:1) of 0.044 ng mL(-1). From Valencian, Spain, supermarkets 94 samples of foods were surveyed for 3-MCPD. Using the optimized method levels higher than the limit established for soy sauce by the European Union were found in some samples. The estimated daily intake of 3-MCPD throughout the investigated foodstuffs for adults and children was found about 0.005 and 0.01%, respectively, of the established provisional tolerable daily intake.     

Prediction of the enthalpy of vaporization of metals and metalloids

A simple correlation equation without adjustable parameters is used to obtain the enthalpy of vaporization of 10 metals and 2 metalloids as a function of the temperature. Besides the critical temperature, this equation requires knowing of the enthalpy of vaporization at two reference temperatures: the lowest available temperature and the normal boiling temperature. Average relative deviations are less than 0.75% for the available ranges of temperature. A comparison is made with three other well-known empirical equations based only on the normal boiling point.     

Energetics of C-F, C-Cl, C-Br, and C-I bonds in 2-haloethanols. enthalpies of formation of XCH(2)CH(2)OH (X = F, Cl, Br, I) compounds and of the 2-hydroxyethyl radical

The energetics of the C-F, C-Cl, C-Br, and C-I bonds in 2-haloethanols was investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of 2-chloro-, 2-bromo-, and 2-iodoethanol, at 298.15 K, were determined as Delta(f)H(degree)m(CH2CH2OH, l) = -315.5 +/- 0.7 kJ.mol-1, Delta(f)H(degree)mBrCH2CH2OH, l) = -275.8 +/- 0.6 kJ.mol-1, Delta(f)H(degree)m(ICH2CH2OH, l) = -207.3 +/- 0.7 kJ.mol-1, by rotating-bomb combustion calorimetry. The corresponding standard molar enthalpies of vaporization, Delta(vap)H(degree)m(ClCH2CH2OH) = 48.32 +/- 0.37 kJ.mol-1, Delta(vap)H(degree)m(BrCH2CH2OH) = 54.08 +/- 0.40 kJ.mol-1, and Delta(vap)H(degree)m(ICH2CH2OH) = 57.03 +/- 0.20 kJ.mol-1 were also obtained by Calvet-drop microcalorimetry. The condensed phase and vaporization enthalpy data lead to Delta(f)H(degree)m(ClCH2CH2OH, g) = -267.2 +/- 0.8 kJ.mol-1, Delta(f)H(degree)m(BrCH2CH2OH, g) = -221.7 +/- 0.7 kJ.mol-1, and Delta(f)H(degree)m(ICH2CH2OH, g) = -150.3 +/- 0.7 kJ.mol-1. These values, together with the enthalpy of selected isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3LYP/cc-pVTZ) and CBS-QB3 calculations were used to derive the enthalpies of formation of gaseous 2-fluoroethanol, Delta(f)H(degree)m(FCH2CH2OH, g) = -423.6 +/- 5.0 kJ.mol-1, and of the 2-hydroxyethyl radical, Delta(f)H(degree)m(CH2CH2OH, g) = -28.7 +/- 8.0 kJ.mol-1. The obtained thermochemical data led to the following carbon-halogen bond dissociation enthalpies: DHo(X-CH2CH2OH) = 474.4 +/- 9.4 kJ.mol-1 (X = F), 359.9 +/- 8.0 kJ.mol-1 (X = Cl), 305.0 +/- 8.0 kJ.mol-1 (X = Br), 228.7 +/- 8.1 kJ.mol-1 (X = I). These values were compared with the corresponding C-X bond dissociation enthalpies in XCH2COOH, XCH3, XC2H5, XCH=CH2, and XC6H5. In view of this comparison the computational methods mentioned above were also used to obtain Delta(f)H(degree)m-594.0 +/- 5.0 kJ.mol-1 from which DHo(F-CH2COOH) = 435.4 +/- 5.4 kJ.mol-1. The order DHo(C-F) > DHo(C-Cl) > DHo(C-Br) > DHo(C-I) is observed for the haloalcohols and all other RX compounds. It is finally concluded that the major qualitative trends exhibited by the C-X bond dissociation enthalpies for the series of compounds studied in this work can be predicted by Pauling's electrostatic-covalent model.     

Boiling Point Parameters of Di- and Trichlorostannane

The boiling point, molar volume of liquid at the boiling point, and enthalpy of vaporization at the boiling point were found by calculation for little-studied tin compounds SnH₂Cl₂ and SnHCl₃.     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part III. Alkylbenzenes as the test analytes

Direct determination of thermodynamic data has always been a complicated and troublesome experimental task. Gas chromatography is among long-established working tools well suited to performing this particular task indirectly. Our own results were first presented in the papers by Ciazynska-Halarewicz and Kowalska (1,2), and this article is Part III in the series. Present experiments are carried out on low- and medium-polarity stationary phases at five different temperatures ranging from 323K to 423K. They enable determination of two thermodynamic properties of the alkylbenzenes, molar enthalpy of vaporization (DeltaH(vap)), and the chemical potential of partitioning of the methylene group between the two phases of the chromatographic system (Delta micro (p(-CH2-))). These properties are obtained from eight nonempirical models and, as is apparent from their derivation (3-7), the terms of the models have clearly defined physical meaning, which enables calculation of thermodynamic properties.     

Organic carbonates: experiment and ab initio calculations for prediction of thermochemical properties

This work has been undertaken in order to obtain data on thermodynamic properties of organic carbonates and to revise the group-additivity values necessary for predicting their standard enthalpies of formation and enthalpies of vaporization. The standard molar enthalpies of formation of dibenzyl carbonate, tert-butyl phenyl carbonate, and diphenyl carbonate were measured using combustion calorimetry. Molar enthalpies of vaporization of these compounds were obtained from the temperature dependence of the vapor pressure measured by the transpiration method. Molar enthalpy of sublimation of diphenyl carbonate was measured in the same way. Ab initio calculations of molar enthalpies of formation of organic carbonates have been performed using the G3MP2 method, and results are in excellent agreement with the available experiment. Then the group-contribution method has been developed to predict values of the enthalpies of formation and enthalpies of vaporization of organic carbonates.     

Enthalpy of vaporization measurements by calorimetric techniques

Journal of Thermal Analysis and Calorimetry - Enthalpies of vaporization, $$ \Delta _{\text{vap}} H^{\circ }_{298} $$ , were determined for perfluorooctyl-1-bromide (PFOB) at the temperature...     

Surface tension and its temperature coefficient for liquid metals

Temperature-dependent surface tension gamma(lv)(T) and its temperature coefficient (T) [=dgamma(lv)(T)/dT] for liquid metals are thermodynamically determined on the basis of an established model for surface energy of crystals. The model predictions correspond to the available experimental or theoretical results. It is found that for metallic liquids gamma(lv)(T(m)) proportional, variant H(v)/V(m)(2/3), gamma(lv)(T) proportional, variant T, and (T) proportional, variant T over a certain temperature range (including T < T(m) and T >/= T(m)), where H(v) and V(m) are the liquid-vapor transition enthalpy at boiling temperature T(b) and the atomic volume at melting temperature T(m), respectively. Furthermore, T(m)(T(m))/gamma(lv)(T(m)) almost remains constant, which gives a way to estimates of (T(m)) values when T(m) and gamma(lv)(T(m)) are known.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

A simultaneous correlation of vapour pressures and thermal data: application to 1-alkanols

R∪žička, K. and Majer, V., 1986. A simultaneous correlation of vapour pressures and thermal data: application to 1-alkanols. Fluid Phase Equilibria, 28: 253-264Possibilities of simultaneous correlation of vapour pressures and thermal data (enthalpy of vaporization and difference between heat capacity of idea gas and liquid) are investigated. This approach permits a reliable evaluation of vapour pressures and/or enthalpies of vaporization far below the normal boiling point and can serve also as a consistency test of experimental data. A simple procedure using smoothed input data is proposed which can be implemented in a software of the data bank of thermodynamic properties. The method is demonstrated on a group of eight 1-alkanols.     

Vapor pressure and heat capacities of perfluoro-<Emphasis Type="Italic">N</Emphasis>-(4-methylcyclohexyl)piperidine

Heat capacities of perfluoro-N-(4-methylcyclohexyl)piperidine (PMCP) have been measured by low-temperature adiabatic calorimetry. The purity of the compound, its triple-point temperature, and its enthalpy and entropy of fusion have been determined. The saturated vapor pressure was determined by comparative ebulliometry as a function of temperature in the 6.2–101.6 kPa pressure range and 374.2–460.9 K temperature range. The calorimetric enthalpy of vaporization at T = 298.15 K has been measured. The following thermodynamic properties were calculated for PMCP: normal boiling temperature, enthalpy of vaporization Δ_vap H _m ⁰ (T) as a function of temperature, and critical parameters. The enthalpies of vaporization at 298.15 K obtained experimentally and by calculation methods match within their error limits, which validates their adequacy and the adequacy of the Δ_vap H _m ⁰ = f(T) equation as an extrapolation.     

Evaluation of thermal analysis equipment for the determination of vapor pressure and heat of vaporization

A rapid, relatively simple method for determining vapor pressure and heat of vaporization on small amounts of organic compounds is described. A DuPont 900 differential thermal analyzer (DTA), a Perkin—Elmer Model DSC-1B differential scanning calorimeter (DSC), and a Thomas—Hoover (TH) melting point apparatus were evaluated in this work. Vapor pressure data for a wide variety of organic liquids were obtained by measuring the boiling points of the liquids at pressures ranging from 20 to 735 torr. A computer was used to rapidly plot the experimental data. The average deviations of boiling points from the literature values were 2.3°C for the DTA 1.2°C for the DSC, and 1.5°C for the TH. The vapor pressure data were used to solve the Haggenmacher equation for heat of vaporization (ΔH_v). The deviations of the experimental values for ΔH_v. from the literature values were 5.5%, 8.3%. and 3.3% for the DTA, DSC, and TH methods, respectively.     

Comparative computational and experimental study on the thermochemistry of the chloropyrimidines

The standard (p0 = 0.1 MPa) molar enthalpies of formation, Delta fH(0)(M), for liquid 2,4,6-trichloropyrimidine and for crystalline 2-chloropyrimidine, 2,4- and 4,6-dichloropyrimidine, and 2,4,5,6-tetrachloropyrimidine compounds were determined at T = 298.15 K by rotating-bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation, Delta (g)(cr,l) H(0)(M), of these compounds at T = 298.15 K were determined by Calvet microcalorimetry. The experimental standard molar enthalpies of formation of those compounds, in the gaseous state, at T = 298.15 K, were thus obtained by combining these two sets of results. The latter values have been employed in the calibration of the computational procedure, which has been used to estimate the gas-phase enthalpies of formation for the other chloropyrimidines that were not possible to obtain in a pure form for the experimental study. It is found that the exchange-correlation functional based on the local spin density approximation (LSDA) seems to be a cheap choice for the estimation of enthalpies of formation for heterocycles containing nitrogen atoms; the well-known B3LYP hybrid method yields larger differences, with respect to the experimental values, for 2,4,6-tri- and 2,4,5,6-tetrachloropyrimidines.     

Correlation between the vaporization heat and the raman frequencies for normal hydrocarbons

It has been shown that a correlation can be established between the heat of vaporization and the Raman frequencies for normal hydrocarbons at equal pressures. The values predicted by the correlating equation compare well with the available experimental values and values obtained by using selected (Riedel, Giacalone, Riedel—Plank—Miller, Pitzer—Chen and Klein—Fishtine) estimating methods. Finally, possible relation between the latent heat of vaporization at the normal boiling point and the Raman frequencies for several classes of compounds, is discussed briefly.