Enhanced bistability with the line-narrowed modes in a nonlinear modulated index Fabry-Perot cavity

We exploit the recently reported line narrowed modes [1] for observation of bistability in a nonlinear Fabry-Perot cavity with intracavity index modulation. We show that the frequency response of the structure exhibits larger bistability loops for the line narrowed modes.     

FP腔中光驱动微悬臂的双稳效应的研究

研究了高灵敏度悬臂梁与光纤端面构筑的低精细度FP型光腔中光驱动的悬臂梁振动的双稳效应。通过改变输入到光腔内的激光功率,检测与之相应的悬臂梁的形变。在实验中发现悬臂梁的形变随激光功率的改变呈现非线性变化的关系,在激光功率增大到一定闽值时可以诱导产生光力双稳效应。通过改变光腔初始腔长成功实现了对产生光力双稳效应阈值的调节。     

Enhanced terahertz bistability in a nonlinear Fabry-Perot resonator with n-type quantum wells

The intrinsic bistable terahertz response of intersubband plasmons in wide n-type delta-doped quantum wells is predicted to be enhanced by a resonant Fabry-Perot cavity. With a simple low-Q resonator, the threshold for bistability is decreased by a factor of 2-3 compared with that for bare multiple quantum wells.     

Logical and relational operations of optical bistable devices operating without external bias

We report successful optical realization of both logical and relational functionality using a multiple quantum well optical bistable device operating without external bias and a simple experimental setup. For the nonbiased optical bistability, we employed extremely shallow quantum wells and asymmetric Fabry-Perot cavity structure in self electro-optic effect device. The change between logical and relational mode was simply realized by controlling the intensity of the optical bias beam into devices following the basic operation principle of the optical bistability.     

Observation of absorptive optical bistability in a fabry-perot cavity containing multiple atomic beams

Using an arrangement of highly collimated sodium atomic beams in a Fabry-Perot cavity absorptive optical bistability has been observed. The response of the optically bistable system was investigated on a time scale of the order of 100 times the characteristic time of the cavity. Even so a non steady state behaviour of the system was observed. Good qualitative agreement with the two-level atom mean field radiation theory has been obtained.     

Theory of the magnon Kerr effect in cavity magnonics

We develop a theory for the magnon Kerr effect in a cavity magnonics system, consisting of magnons in a small yttrium iron garnet(YIG) sphere strongly coupled to cavity photons, and use it to study the bistability in this hybrid system. To have a complete picture of the bistability phenomenon, we analyze two different cases in driving the cavity magnonics system, i.e.,directly pumping the YIG sphere and the cavity, respectively. In both cases, the magnon frequency shifts due to the Kerr effect exhibit a similar bistable behavior but the corresponding critical powers are different. Moreover, we show how the bistability of the system can be demonstrated using the transmission spectrum of the cavity. Our results are valid in a wide parameter regime and generalize the theory of bistability in a cavity magnonics system.     

Analysis of Transient Optical Bistability and Stability in a Nonlinear Fiber Fabry-Perot Resonator Based on an Iterative Method

We perform a transient analysis, steady-state analysis, and linear stability analysis of a nonlinear Fabry-Perot resonator in order to examine the possibility of a fiber bistable device. We here develop two iterative methods for calculating the dynamics of the Fabry-Perot resonator containing a nonlinear medium with an instantaneous response time. The treatment of the counter-propagating field within the cavity is very important in estimating the nonlinear phase shift due to propagation. A trapezoid rule and midpoint rule are used here for the numerical integration. The iterative method using the trapezoid rule gives excellent agreement with the multiple-beam method developed by Bischofberger and Shen (Phys. Rev. A 19 (1979) 1169), which is more complicated than the proposed procedure. Unfortunately it is found that the midpoint approximation is numerically unstable. Assuming a conventional optical fiber, the switching power for optical bistability is less than 1 kW for a resonator length of 1-2 cm. On the basis of the iterative method, we perform a linear stability analysis to examine whether Ikeda instability affects bistable device application or not. The stability analysis shows that the instability threshold is two orders of magnitude larger than the switching power for optical bistability.     

Optical dispersive bistability in media with forced girotropy

In this paper the results of an analysis concerning the course of optical dispersive bistability in media with forced girotropy (the Faraday effect) are presented. It is shown that radiation transmitted through a non-linear Fabry-Perot cavity reveals, apart from bistability of the intensity, bistable states of polarization. The elliptically polarized transmission radiation changes bistably not only the value of proportion of the semiaxes of the polarization ellipse and the orientation angle of its major semi-axis, but also the direction of the rotation of its electric vector.     

Feedback-controlled nonresonant laser cooling

We present a new approach to nonresonant laser deceleration and cooling of atoms based on their interaction with a bistable optical cavity. The cooling mechanism presents a photonic version of Sisyphus cooling, in which the conservative motion of atoms is interrupted by sudden transitions between two stable states of the cavity mode. The mechanical energy is extracted due to the hysteretic nature of those transitions. The bistable character of the cavity may be achieved by an external feedback loop, or by means of nonlinear intracavity optical elements. In contrast to the conventional cavity cooling, in which atoms experience a viscoustype force, bistable cavity cooling imitates “dry friction” and stops atoms much faster. Based on this novel approach, we explore the prospects of using optical bistability for efficient radiation pressure cooling of micromechanical devices that are modeled as a Fabry-Perot resonator with one fixed and one oscillating mirror. In all cases, analytical results are presented, supported by realistic numerical examples.     

Optical bistability in a triple semiconductor quantum well structure with tunnelling-induced interference

We study the behavior of optical bistability (OB) in a triple semiconductor quantum well structure with tunnelling-induced interference, where the system is driven coherently by the probe laser inside the unidirectional ring cavity. The results show that we are able to control efficiently the bistable threshold intensity and the hysteresis loop by tuning the parameters of the system such as laser frequency and tunnelling-induced frequency splitting. This investigation can be used for the development of new types of nanoelectronic devices for realizing switching process.     

Ultralow noise and supermode suppression in an actively mode-locked external-cavity semiconductor diode ring laser

We report what is to our knowledge the lowest phase and amplitude noise characteristics achieved to date in a 10-GHz pulse train produced by the active harmonic mode locking of an external-cavity semiconductor diode laser. Supermode noise has also been suppressed below -140 dBc/Hz by use of a high-finesse fiber Fabry-Perot etalon as an intracavity filter. Novel noise sideband measurements that extend to the Nyquist offset frequency suggest a significant advantage in using harmonic (rather than fundamental) mode locking to produce ultralow-noise pulse trains, owing to the relationship between the noise roll-off frequency and the fundamental cavity frequency.     

Optical bistability and signal processing in a microstructured fiber ring resonator

We explore theoretically the effects of bistability in a microstructured fiber-based ring resonator. Numerical simulations indicate that bistable behavior of the fiber cavity can be observed with a short length of fiber. Feasibility of all-optical processing using this type of cavity is also investigated. In particular, we show that a ring cavity including a microstructured fiber should allow one to perform flip-flop and time-division demultiplexing functions. The analysis presented here will be useful for future design of bistable microstructured fiber device.     

Optical testability in semiconductors with density-dependent carrier lifetimes

The performance characteristics of semiconductor optical bistable Fabry-Perot devices making use of band-gap resonant nonlinearities will be significantly altered when the excess carrier recombination is density-dependent. This paper analyses the effects of radiative and Auger recombination processes in some practical etalon configurations. Optical bistability is, in general, more difficult to achieve under these conditions but suitable cavity design can significantly reduce the minimum incident intensity required.     

Bistability and photon antibunching in sub/second harmonic generation

We analyse the nonlinear interaction between a fundamental and second harmonic wave inside a Fabry-Pérot cavity where both modes are driven by a coherent driving field with a definite phase. We find that under certain experimentally accessible conditions bistable operation is possible. In addition it is shown that photon antibunching in the steady state may occur.     

Dynamical hysteresis in a three-level atomic system

We have experimentally investigated dynamical hysteresis behavior by changing the sweeping frequency of the cavity input field in the optical bistability of rubidium atoms (in a three-level atomic-type configuration) inside an optical cavity. The shape, width (or area), and direction of the hysteresis cycle are sensitive functions of the sweeping frequency for such an optical bistable system.     

金属/电介质颗粒复合介质的非线性交流响应

推广T矩阵法来研究二组分颗粒复合介质的非线性交流响应，解析推导出基频、三次及五次谐波频率下的有效线性介电常数及三阶和五阶非线性极化率的解析表达式.当组分颗粒的介电常数为实数时，表达式同以前微扰理论完全一致.进一步数值计算了金属-电介质复合介质的有效非线性交流响应，数值结果表明，体系的三阶、五阶非线性极化率在表面等离子共振频率附近有明显增强，而且，随着体积分数提高，共振峰增强且伴随着共振频率红移现象.还进一步讨论了维度效应对体系非线性交流响应的影响. 关键词： T矩阵方法 复合介质 非线性交流响应     

Investigation of transmit and receive performance at the fundamental and third harmonic resonance frequency of a medical ultrasound transducer

In this study, the phenomenon of higher harmonic thickness resonance of a piezoelectric transducer was used to investigate potentially additional sensitivity at the third harmonic frequency for conventional medical transducers. The motivation for this research is that some applications in medical ultrasound (e.g. third harmonic transmit phasing and contrast imaging) need probes which are sensitive around both the fundamental and third harmonic frequencies, and that these higher harmonic thickness modes, although often considered as undesired, might be used beneficially. The novelty aspect in this study is the presented transmit and receive potential at both the fundamental and third harmonic of a conventional cardiac probe with modified electrical tuning. Elements of an experimental PZT-based phased-array probe (f_c = 3 MHz, 64 elements, element width = 0.3 mm, elevation aperture = 13 mm) were electrically retuned with series inductors around the third harmonic resonance frequency at 10 MHz. Hydrophone measurements with 10-MHz-tuned elements showed that, as compared to a conventionally tuned element, the transmit transfer function at the third harmonic increased more than 23 dB, while the sensitivity at the fundamental frequency was only 6 dB lower. Pulse-echo measurements showed that the two-way transfer function of a 10-MHz-tuned element resulted in 20 dB increased sensitivity around the third harmonic as compared to an untuned element. Simulated transfer functions, from both a 1D KLM and 2D finite element model of an element of the experimental array transducer, confirmed the measured sensitivity peaks at the fundamental and third harmonic. In conclusion, this study demonstrated the effect of changing the electrical tuning on a conventional array transducer which increased the sensitivity around the third harmonic resonance frequency, while maintaining good sensitivity at the fundamental frequency.     

Bistable operation and spatial hole burning in multimode lasers containing saturable absorbers

Continuous-wave operation of many longitudinal modes with randomly distributed phases in a Fabry-Perot cavity containing a laser medium and a saturable absorber is investigated theoretically. The atomic linewidths of both media are assumed to be homogeneously broadened. The system is described by a coupled set of rate equations including noise terms as well as the dependence of the population difference on the spatial coordinate (along the laser axis) due to standing-wave pattern. The minimum ratio of the saturation intensities of both media which is necessary to get bistability is calculated for different places of the amplifier and the absorber within the cavity and for different spectral widths of the laser field. Due to hole burning which influences the strength of saturation in the media this ratio can vary notably. Moreover, the intensities on the branches of the hysteresis cycles associated with bistable operation are evaluated.     

Polarization Switching Bistability and Dynamics in Vertical-Cavity Surface-Emitting Laser under Orthogonal Optical Injection

Bistability as well as dynamics associated to polarization switching in a vertical-cavity surface-emitting laser (VCSEL) submitted to orthogonal optical injection from an external master laser are investigated. Intensity-polarization switching bistability is studied by increasing and decreasing the intensity of the injected beam and for a fixed frequency detuning, i.e. the frequency offset between master and the free running VCSEL. Depending on the frequency detuning, bistable switching is experimentally found to occur with or without injection locking of the fundamental mode to the master laser frequency. For large positive detuning, injection locking of the first-order transverse mode with a strong depression of the fundamental mode has been observed. The case of frequency – polarization switching bistability, i.e. when the frequency detuning is first decreased and then increased for a fixed injected power, has also been theoretically analyzed. Qualitative comparison with previous experimental work is presented for the dependence of the width of the bistable switching region on the injection strength level. Finally we show an experimental result of complicated dynamics including period doubling route to chaos that accompany polarization switching and which motivates future theoretical investigations.     

利用带模型探讨染料环形腔系统的光学双稳特性

利用染料分子带模型，探讨了染料环形腔系统的光学双稳特性，得到光学双稳可在一个比较大的频率范围内实现；其双稳区域是染料分子带结构参数（带宽及偶极分布的Ｌｏｒｅｎｔｚｉａｎ宽度等）的函数． 关键词：