CuO－ZnO基CO_2／H_2合成甲醇催化剂的反应活性中心

应用ＸＰＳ，ＸＡＥＳ和紫外漫反射光谱法研究了ＣｕＯ－ＺｎＯ／氧化物上ＣＯ２／Ｈ２合成甲醇的反应活性中心．ＣｕＯ－ＺｎＯ／氧化物催化剂上的反应活性中心是存在于ＣｕＯ－ＺｎＯ固溶体中的Ｃｕ－Ｚｎ－Ｏ（＂□＂为氧空位），活性中心的Ｃｕ价态为Ｃｕ－和Ｃｕ０．反应活性中心在ＣｕＯＺｎＯ－ＺｒＯ２催化剂上比在其它ＣｕＯ－ＺｎＯ／氧化物催化剂如ＣｕＯ－ＺｎＯ，ＣｕＯ－ＺｎＯ－ＭｇＯ，ＣｕＯＺｎＯ－Ａｌ２Ｏ３和ＣｕＯ－ＺｎＯ－ｒ２Ｏ３上更加稳定．     

CuO-ZnO基CO2/H2合成甲醇催化剂的反应活性中心

应用 ＸＰＳ，ＸＡＥＳ和紫外漫反射光谱法研究了ＣｕＯ－ＺｎＯ／氧化物上ＣＯ２／Ｈ２合成甲醇的反应活性中心。ＣｕＯ－ＺｎＯ／氧化物催化剂上的反应活性中心是存在于ＣｕＯ－ＺｎＯ固溶体中的Ｃｕ－口－Ｚｎ－Ｏ（＂口＂为氧空位），活性中心的Ｃｕ价态为Ｃｕ＾＋和Ｃｕ＾０。反应活性中心在ＣｕＯ－ＺｎＯ－Ｚｒｏ２催化剂上比在其它ＣｕＯ－ＺｎＯ／氧化物催化剂如ＣｕＯ－ＺｎＯ，ＣｕＯ－ＺｎＯ－ＭｇＯ，ＣｕＯ－ＺｎＯ－     

二氧化碳加氢合成二甲醚的研究——ZrO2含量对Cu—ZnO—SiO2—ZrO2催 …

考察了ＣＯ２加氢合成ＣＨ３ＯＣＨ３反应中ＺｒＯ２含量对Ｃｕ－ＺｎＯ－ＳｉＯ２－ＺｒＯ２催化剂的影响,采用ＴＰＲ,ＸＲＤ,ＢＥＴ和ＴＥＭ等技术对催化剂的结构形态、表面性质和ＺｒＯ２的作用进行了研究,结果表明,催化剂中加入ＺｒＯ２能提高催化剂的比表面积及ＣＯ２转化率和ＣＨ３ＯＣＨ３产率,降低最佳反应温度;ＺｒＯ２含量以２％～３％为佳,催化剂中的ＣｕＯ以种形式存在：小晶粒ＣｕＯ,聚集的无定形ＣｕＯ及均匀     

铜基氧化锆载体合成甲醇催化剂的结构表征

以ＸＲＤ，ＥＸＡＦＳ和ＥＳＲ等手段考察了ＣｕＯ／ＺｒＯ２催化剂及其还原态的结构，结果表明，在ＣｕＯ／ＺｒＯ２中铜以ＣｕＯ的形式存在，ＺｒＯ２载体对所负载的ＣｕＯ的结构有影响，ＣｕＯ的分散度与焙烧温度有关，在适当的温度下焙烧，负载于ＺｒＯ２上的ＣｕＯ可自发分散，在还原态试样中铜主要以有金属的形式存在，但是当试样中铜的含量小，铜的分散度高时有铜的氧化物存在，其Ｃｕ－Ｏ键距介于ＣｕＯ与ＣｕＯ２之间，Ｃｕ     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

Cu对Cu—Mn—Ce—O和Cu—Mn—Ce—Pd—O催化剂三效性能的影响

利用火焰脉冲－微反装置考察了Ｃｕ－Ｍｎ－Ｃｅ－Ｏ和Ｃｕ－Ｍｎ－Ｃｅ－Ｐｄ－Ｏ两类催化剂的三效活性。结果表明Ｃｕ的加入有利Ｃｕ－Ｍｎ－Ｃｅ－Ｏ的ＮＯｘ和ＣＯ的转化，而不利于Ｃｕ－Ｍｎ－Ｃｅ－Ｐｄ－Ｏ的ＮＯｘ和ＨＣ的转化。ＸＲＤ分析结果表明在Ｃｕ－Ｍｎ－Ｃｅ－Ｏ中加入Ｐｄ，原来的ＣｕＭｎ２Ｏ３消失，生成新相ＭｎＡｌ２Ｏ４；ＴＰＲ分析结果表明Ｃｕ使Ｍｎ－Ｃｅ－Ｏ样品表面氧量增加，表面易于还原，而使Ｍｎ－     

助剂对超细CuO－ZnO－SiO_2催化剂性质和CO_2加氢反应性能的影响

研究了９种助剂对用于ＣＯ２加氢反应的超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂性能的影响，并进行了ＸＲＤ和ＴＰＲ表征．结果表明，助剂影响超细催化剂的性质和催化性能，ＴｉＯ２、ＣｅＯ２、ＭｇＯ和Ｌａ２Ｏ３是ＣＯ２加氢合成甲醇的超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂体系的优良助剂．在含有不同助剂的ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂体系内存在ＣｕＯ和ＺｎＯ晶相，但除ＣｅＯ２以外，其它的助剂都可能以微晶或无定型的形式存在．ＴＰＲ研究表明，添加的助剂除ＣｅＯ２以外，都使超细ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂的还原温度提高，而且助剂对ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂活性的影响，按照助剂对ＣｕＯ－ＺｎＯ－ＳｉＯ２催化剂还原温度的影响进行了探讨     

负载型非晶态Cu/SiO2催化剂的非晶性质

以超细ＳｉＯ２为载体，用ＫＢＨ４还原Ｃｕ＾２＋盐溶液制备了非负载型Ｃｕ和负载型Ｃｕ／ＳｉＯ２催化剂，ＸＲＤ，ＴＥＭ和电子衍射分析结果表明，负载型Ｃｕ／ＳｉＯ２为完全非晶态，而非负载型Ｃｕ中存在着少量晶态Ｃｕ，ＤＳＣ结果表明，非晶态Ｃｕ／ＳｉＯ２的热稳定性明显高于非负载型Ｃｕ，说明超细ＳｉＯ２具有稳定非晶结构的作用，ＸＰＳ结果表明，还原产物中的铜原子呈Ｃｕ状态，ＩＣＰ分析结果表明，样品中的Ｂ含量均低     

CO在YBa2Cu3Ox薄膜上吸附与加氢的研究

ＹＢａ２Ｃｕ３Ｏｘ（ｘ＝６－７）薄膜被合成在ＹＳＺ基底上，用ＦＴＩＲ，ＸＰＳ，ＸＲＤ等手段原位研究ＣＯ在薄膜上的吸附及加氢行为。ＣＯ吸附在Ｃｕ位置上，与ＹＢＣＯ体相中的Ｏ作用，生成表面ＣＯ２或－ＣＯＯ基团，导致ＹＢＣＯ中生产氧空位，使ＹＢＣＯ发生昌型转变，Ｃｕ＾２＋被还原为Ｃｕ＾＋或Ｃｕ＾０．ＹＢＣＯ中的氧空位有利于ＣＯ、ＣＯ２及Ｈ２的吸附。ＣＯ、ＣＯ２在ＹＢＣＯ膜上的加氢产物为ＣＨ３ＯＨ、ＣＨ３     

ZnO在CuO基甲醇合成催化剂还原过程中的作用(英)

用一步并流共沉淀法制备了一系列具有不同组成的ＣｕＯ基样品，并测试了它们在合成甲醇反应中的活性。利用ＴＧ ＤＴＧ手段，对各ＣｕＯ基样品的还原过程进行了考察，结果表明，ＺｎＯ组分对催化剂ＣｕＯ ＺｎＯ Ａｌ２Ｏ３的还原行为有重要影响。依据Ｃｏａｔｓ Ｒｅｄｆｅｒｎ 处理方法获得了ＣｕＯ基样品的还原动力学参数     

Effective interaction parameter of linear/star polymer blends and comparison with that of linear/linear and star/star blends

The authors present a detailed study of the microscopic parameters, which control the miscibility in binary linear/star polymer blends. The effective interactions of linear/star polymer blends are studied by means of Monte Carlo simulations and comparison is made with linear/linear and star/star blends, which they also determined. Using the bond fluctuation model on a simple cubic lattice, the authors are able to simulate symmetric linear/linear, star/star, and, for the first time, linear/star blends with a moderate number of arms. The simulations were performed at a volume fraction of occupied lattice sites phi=0.5, which corresponds to dense polymer mixtures for this algorithm. In particular, we study star/star blends with 4, 8, and 12 arms and the respective linear/linear blends as well as linear/star blends, all having the same total number of units equal to 73 and 121. The authors find that linear/star blends are more miscible than the corresponding linear/linear blends, which is in agreement with recent experimental and theoretical results. They find that linear/star mixtures are less miscible than star/star blends, a result which is also verified by theoretical findings.     

An Overview of Linear Dielectric Polymers and Their Nanocomposites for Energy Storage

As one of the most important energy storage devices, dielectric capacitors have attracted increasing attention because of their ultrahigh power density, which allows them to play a critical role in many high-power electrical systems. To date, four typical dielectric materials have been widely studied, including ferroelectrics, relaxor ferroelectrics, anti-ferroelectrics, and linear dielectrics. Among these materials, linear dielectric polymers are attractive due to their significant advantages in breakdown strength and efficiency. However, the practical application of linear dielectrics is usually severely hindered by their low energy density, which is caused by their relatively low dielectric constant. This review summarizes some typical studies on linear dielectric polymers and their nanocomposites, including linear dielectric polymer blends, ferroelectric/linear dielectric polymer blends, and linear polymer nanocomposites with various nanofillers. Moreover, through a detailed analysis of this research, we summarize several existing challenges and future perspectives in the research area of linear dielectric polymers, which may propel the development of linear dielectric polymers and realize their practical application.     

Surface tension of polystyrene blends: Theory and experiment

Surface tension of linear–linear and star/linear polystyrene blends were measured using a modified Wilhelmy method. Our results show that for both polystyrene blend systems, the surface tension‐composition profile is convex, indicating a strong surface excess of the component with lower surface energy. Star/linear blends display more convex surface tension profiles than their linear–linear counterparts, indicative of stronger surface segregation of the branched‐component relative to linear chains. As a first step toward understanding the physical origin of enhanced‐surface segregation of star polymers, self‐consistent field (SCF) lattice simulations (both incompressible and compressible models) and Cahn‐Hilliard theory were used to predict surface tension‐composition profiles. Results from the lattice simulations indicate that the highly convex surface tension profiles observed in the star/linear blend systems are only possible if an architecture‐dependent, Flory interaction parameter (χ = 0.004) is assumed. This conclusion is inconsistent with results from bulk differential scanning calorimetry (DSC) measurements, which indicate sharp glass transitions in both the star/linear and linear/linear homopolymer blends and a simple linear relationship between the bulk glass transition temperature and blend composition. To implement the Cahn‐Hilliard theory, pressure‐volume‐temperature (PVT) data for each of the pure components in the blends were first measured and the data used as input for the theory. Consistent with the experimental data, Cahn‐Hilliard theory predicts a larger surface excess of star molecules in linear hosts over a wide composition range. Significantly, this result is obtained assuming a nearly neutral interaction parameter between the linear and star components, indicating that the surface enrichment of the stars is not a consequence of complex phase behavior in the bulk. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1666–1685, 2009     

三嵌段共聚物和两嵌段共聚物在水溶液中共混自组装成多室胶束结构的耗散粒子动力学模拟(英文)

利用耗散粒子动力学模拟研究了在水溶液中混合不同的线形三嵌段共聚物AxByCz和线形两嵌段共聚物AmBn对多室胶束的形貌多样性的影响.通过改变线形的三嵌段共聚物和两嵌段共聚物的链长来寻找多室胶束的形成条件.由线形三嵌段共聚物和线形两嵌段共聚物的不同混合形成的多室胶束结构是多种多样的,例如"蠕虫状"胶束、"汉堡包"胶束、"球上球"胶束、"核-壳-壳"胶束等等.多室胶束的整体形貌和内部结构的控制都可以从线形三嵌段共聚物和两嵌段共聚物的二元共混得到.为了表征获得的多室胶束结构,我们计算了密度图和成对分布函数图.在此工作中,可以获得和观察到复杂的多室胶束.结果表明,简单地混合线形的三嵌段共聚物和线形的两嵌段共聚物是一个控制多室胶束形貌和结构的有效方法,在工程实验中可以更简单更经济地形成多室胶束结构.因此,在设计新的多室胶束方面,聚合物共混仍然是未来值得更加关注的一个话题.     

短链支化对低分子量聚乙烯结晶及熔融行为的影响

研究了金属茂催化的低分子量支化聚乙烯和线性聚乙烯的结晶及熔融行为 ,发现支化聚乙烯的结构与线性聚乙烯相同为正交结构 ,但晶格略有膨胀 .支链的存在对熔融行为影响不大 ,两种聚乙烯的熔点均随结晶温度的升高而非线性增加 ,表现出低分子量样品的共同特征 .但支链的存在对结晶行为却有很大的影响 ,主要是由于支链的存在降低了晶体的结晶速率从而影响结晶过程 ,使得低分子量的支化聚乙烯的结晶行为与高分子量线性聚乙烯的结晶行为相似而与低分子量的线性聚乙烯不同 .动力学分析表明 ,低分子量的支化聚乙烯的结晶生长方式的转变温度比同等分子量的线性聚乙烯降低了约 2 0℃     

Reproducibility of Programmed-Temperature Retention Indices under Average Linear Velocity Carrier Gas Control of GC and GC�CMS

Programmed-temperature retention indices (PTRIs) are useful for the identification and quantification of chemicals by means of GC and GC/MS. To obtain reproducible PTRIs, we studied the influence of average linear velocity and column length under the constant average linear velocity control (CVC) using 55 pesticides and 33 fatty acid methyl esters. The PTRIs decreased with increasing average linear velocity, and the degree of decrease differs with the compounds. The PTRIs, however, were almost constant as long as the same average linear velocity was used even if the column length was changed. In addition, the correlation between the variation ratio in PTRI and the increase in average linear velocity was linear. Using the linear relationship between PTRIs and average linear velocities under CVC, highly reproducible PTRIs were obtained even if the capillary column length changes. Furthermore, the PTRIs determined by GC with FID, ECD, and FPD under atmospheric pressure were applied to GC/MS under vacuum or vice versa. From these results, it was confirmed that because CVC provides reproducible retention indices, CVC is advantageous for qualitative and quantitative analysis by GC and GC/MS.     

Polyion complex nanomaterials from block polyelectrolyte micelles and linear polyelectrolytes of opposite charge: 1. Solution behavior

The present study investigates whether block polyelectrolyte micelles can form soluble complexes upon interaction with oppositely charged linear polyelectrolytes. The phase behavior and molecular characteristics of the complexes were examined by turbidimetry, phase analysis, dynamic light scattering, and sedimentation velocity techniques. At an excess of polyelectrolyte micelles, soluble complexes were formed either independently on the route of preparation or, for select linear polyelectrolytes, through routes that avoided macrophase separation. Such soluble complexes are in a thermodynamic equilibrium state for all polyion pairs. The hydrodynamic sizes and sedimentation coefficients did not depend on the chemical nature of the linear polyelectrolyte, but were determined by the charge ratios and the hydrodynamic properties of the initial micelles. At an excess of linear polyelectrolyte, complex solubility and molecular characteristics depended on the chemical nature of the linear polyelectrolyte. In this region, linear polyelectrolytes formed soluble complexes with micelles if soluble complexes could be formed with the corresponding linear analogues of the block polyelectrolyte.     

Osmotic deswelling of microgels by linear polyelectrolytes

Polyacrylate microgels used as absorbers or viscosifiers in water are known to have these useful qualities reduced in the presence of linear poly-electrolytes. An osmotic deswelling mechanism is postulated whereby the counterions from linear chains sterically excluded from the gel act to draw solvent from the gel phase. This postulate is tested using intrinsic viscosity measurements of Carbopol microgels, made with the linear polyelectrolyte considered as parr of the solvent. The intrinsic viscosity is used to calculate the swollen-to-dry volume ratio for the microgel in the presence or absence of 0.1% linear sodium polyacrylate over a range in ionic strength. Simultaneously, a standard treatment for the free energy of a network of non-Gaussian chains containing fixed charges is modified to include the osmotic effect of the excluded counterions. In the absence of linear polymer, the theory is fit to the data, the fitting parameter being the 3100 monomer units between crosslink sites in the network. In the presence of high (350 000) molecular weight linear polymer, good agreement is found between the observed deswelling and that predicted if the linear chains are totally excluded. Lower molecular weight linear chains are found to give a reduced deswelling which is shown to be self-consistent with their partitioning into the network.Presented in part at the 64th Colloid and Surface Science Symposium, Lehigh University, June 1990     

Compensation Theory of Adsorption: Correlation and Prediction of Henry Constants for Linear Paraffins on Zeolite Adsorbents

Experimental Henry's Law equilibrium data for linear paraffins show a well defined linear variation of adsorption energy with carbon number and a linear relationship between the entropy and energy of adsorption (compensation effect). Such correlations, are presented for sorption of linear paraffins on NaX, NaY, USY, silicalite and silica gel as well as for two commercial (faujasite based) catalysts and provide a concise way to predict the adsorptive behavior of the higher paraffins.