Identification of oxygenated polycyclic aromatic hydrocarbons in diesel particulate matter by capillary gas chromatography and capillary gas chromatography/mass spectrometry

Summary Using a two-step liquid chromatographic separation on normalphase cartridges, crude extracts of diesel particulate matter can be separated without time-consuming sample handling into special fractions which mainly contain slightly-polar oxygenated polycyclic aromatic hydrocarbons (oxy-PAH) and nitrated polycyclic aromatic hydrocarbons (nitro-PAH). Subsequent analysis was by fused-silica capillary gas chromatography on a SE54 column along with flame-ionisation (GC/FID) and positive-ion electron-impact mass spectrometric detection (GC/MS) respectively. A number of individual oxy-PAH belonging to four different chemical classes (ketones, quinones, anhydrides and aldehydes) and several individual nitro-PAH were characterized by their retention times and mass spectra. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Analysis of nitrated polycyclic aromatic hydrocarbons by glass capillary gas chromatography using different detectors

Glass capillary gas chromatography has been investigated as a method for the analysis of nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using both splitless and on-column injection techniques. The nitro-PAH showed good chromatographic performance and thermal stability under the GC conditions used. Retention times and response factors of several nitro-PAH were compared to those of conventional PAH. Simultaneous flame ionization and thermionic nitrogen selective detection was used to facilitate identification of nitro-PAH in complex samples. The feasibility of the method is demonstrated on two samples of commercial carbon black. Besides 1-nitropyrene several isomeric dinitropyrenes have been identified.     

Separation of molecular tracers sorbed onto atmospheric particulate matter by flash chromatography

In to order increase sensitivity and to reduce the background induced by matrix effects, a method was developed that uses flash chromatography to separate various compounds present in atmospheric aerosol samples prior to their analysis with different analytical techniques (GC–MS, GC–FID, HPLC). For this purpose, flash chromatography using a 4 g silica gel column crossed by eluent at a flow rate of 20 mL min⁻¹ was used. An eluent with enhanced polarity is needed to separate nonpolar (linear and branched alkanes), semipolar (PAH, nitro-PAH and cholesterol) and polar (methoxyphenols, alkanoic acids, and levoglucosan) compounds. Three combinations of solvents were used: hexane for the nonpolar fraction (F1), toluene/hexane for the semipolar fraction (F2) and dimethylformamide for the polar fraction (F3). The use of different eluents for each fraction allows separation of the sample to be accomplished with good repeatability and satisfying yields [85 ± 5% for F1, 81 ± 8% (PAHs), 89 ± 6% (nitro-PAHs) and 74 ± 7% (cholesterol) for F2 and 79 ± 7% (n-alkanoic acids), 40 ± 11% (methoxyphenols) and 77 ± 6% (levoglucosan) for F3]. The methoxyphenol yields were low due to losses during the concentration/evaporation step. This method was then applied to analyse the organic composition of particles collected at an urban site in Strasbourg (France).     

HPLC analysis of the large polycyclic aromatic hydrocarbons in a diesel particulate

Summary High performace liquid chromatography (HPLC) was used to separate the large polycyclic aromatic hydrocarbons in a diesel particulate extract. Identification of individual peaks was made using a photodiode array UV/visible detector to collect their absorbance spectra. Comparisons between standard compounds and the peaks were made using both retention times and spectra. Compounds of up to 10 rings were identified.     

Determination of 1-nitropyrene by thin-layer chromatography in a diesel exhaust particulate extract

A method is described for the determination of 1-nitropyrene in a diesel exhaust particulate extract by thin-layer chromatography. 1-Nitropyrene is determined as 1-aminopyrene after prechromatographic reduction and isolation by solvent partition. The fluorescence response of 1-aminopyrene is approximately 1000-fold greater than that of 1-nitropyrene. The poor fluorescence stability of 1-aminopyrene on silica gel plates prevents in situ detection by scanning densitometry unless the plates are impregnated with a mixture of 2,6-di-tert-butyl-4-methylphenol and Fomblin H-Vac. A linear response from 1 to 150 ng of 1-aminopyrene and a detection limit of 1.0 ng were obtained using the impregnated plates. For fourteen samples of a diesel exhaust particulate extract the concentration of 1-nitropyrene was determined to be 165 μg/g with an RSD = 9.0%. No significant interferences were observed from other nitro- or aminopolycyclic aromatic compounds present in the extract.     

Analysis of nitrated polycyclic aromatic hydrocarbons by liquid chromatography with fluorescence and mass spectrometry detection: air particulate matter, soot, and reaction product studies

Polycyclic aromatic hydrocarbons (PAH) and their nitrated derivatives (nitro-PAH) are environmental pollutants which pose a threat to human health even at low concentration levels. In this study, efficient analytical methods for the analysis of nitro-PAH and PAH (extraction, clean-up, chromatographic separation, and spectrometric detection) have been developed, characterized, and applied to aerosol samples. The separation and quantification of 12 nitro-PAH was carried out by reversed-phase high performance liquid chromatography (HPLC), on-line reduction, and fluorescence detection. The detection limits were in the range of 0.03–0.5 g L^–1 (6–100 pg in the investigated sample aliquots), and the recovery rates from soot samples were 70–90%. Nitro-PAH and PAH concentrations have been determined for different types of soot and for urban, rural, and alpine fine air particulate matter (PM2.5). For the first time, trace amounts of nitro-PAH have been detected in a high-alpine clean air environment. The on-line reduction and fluorescence technique has been complemented by atmospheric pressure chemical ionization time-of-flight mass spectrometry (APCI-TOF-MS). The MS detection allowed the analysis of partially nitrated and oxygenated PAH in laboratory studies of the heterogeneous reaction of PAH on soot and glass fiber substrates with gaseous nitrogen oxides and ozone. It led to the tentative identification of a previously unknown nitrated derivative of the particularly toxic PAH benzo[a]pyrene (BaP-nitroquinone), and provides the first experimental evidence that PAH-nitroquinones can be formed by reaction of PAH with atmospheric photooxidants.     

Separation of isomers of nitro-polycyclic aromatic hydrocarbons

Since positional isomers of several nitro-polycyclic aromatic hydrocarbons (nitro-PAH) contain widely different mutagenic properties, methods for separating the isomers were investigated. High performance liquid chromatography with dichloromethane in hexane on silica gave the best resolution for the majority of the compounds. A few groups of isomers were better resolved with other modifiers or with reversed phases. Of the reversed phase systems, methanol-water gave better resolution than acetonitrile-water. With dichloromethane/hexane on silica, the retention was found to depend on the presence of a bay nitro group (first), the number of H atoms peri to the nitro group (second), and the length/breadth ratio of the molecule (third). Front electron density calculations were combined with the structure-retention relations in making tentative structure assignments of minor isomers of nitro-PAH.     

Isolation and identification of mutagenic nitro-pah in diesel-exhaust particulates

More than 50 nitro-PAH have been tentatively identified in an extract of diesel-exhaust particulates. Identifications are based on high-resolution mass spectrometry of directly mutagenic fractions derived from sequential fractionation of the extract by both low- and high-resolution liquid chromatography. The diversity of nitro-PAH tentatively identified suggests that large numbers of such compounds are formed during or following the combustion process.     

Negative ion laser desorption ionization time-of-flight mass spectrometry of nitrated polycyclic aromatic hydrocarbons

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are widespread environmental pollutants that are generated by incomplete combustion and by atmospheric transformation of polycyclic aromatic hydrocarbons (PAHs). Many nitro-PAH compounds are potent genotoxins and some are direct acting mutagens. Detection of nitro-PAHs in aerosols is complicated by small sample sizes and nitro-PAH abundances that are 1–2 orders of magnitude less than analogous unsubstituted PAHs. Selective detection of several nitro-PAHs by using laser desorption ionization time-of-flight mass spectrometry in negative ion mode has been achieved. Desorption and ionization of nitro-PAHs were effected by using pulsed UV radiation at 266 and 213 ran. Intense molecular anions were observed in addition to fragments identified as CN^? and NO ₂ ^? , which were characteristic indicators of the presence of nitro-PAHs. Selective detection of nitro-PAHs in negative ion mode was demonstrated in the analysis of a diesel particulate sample.     

Simultaneous determination of oxalate, thiosulfate, and thiocyanate in urine by ion-exclusion chromatography with electrochemical detection

Summary A sensitive ion-exclusion chromatographic method has been developed for determination of oxalate, thiosulfate, and thiocyanate. The method is based on separation of these anions on a polymethacrylate-based, weakly acidic cation-exchange resin (TSKgel OApak-A) and detection by means of a glassy carbon (GC) electrode electrochemically modified with polyvinylpyridine (PVP), palladium, and iridium oxide (PVP/Pd/IrO₂). The electrochemical behavior of oxalate, thiosulfate, and thiocyanate at this chemically modified electrode (CME) have been investigated by cyclic voltammetry. The results indicated that electrocatalytic oxidation of these anions by the electrode was efficient and that the sensitivity, stability, and lifetime of the electrode were relatively high. Combined with ion-exclusion chromatography the PVP/Pd/IrO₂ electrode was used as the working electrode for amperometric detection of these anions. All linear ranges were over two orders of magnitude and detection limits, defined asS/N=3, were 9.0×10⁻⁷ mol L⁻¹ for oxalate, 6.7×10⁻⁷ mol L⁻¹ for thiosulfate, and 5.6×10⁻⁷ mol L⁻¹ for thiocyanate. Correlation coefficients were all>0.998. Coupled with microdialysis sampling the method has been successfully applied to the determination of oxalate, thiosulfate, and thiocyanate in urine.     

Simultaneous determination of cocaethylene and cocaine in blood by gas chromatography with surface ionization detection

Summary Cocaethylene together with cocaine spiked in human whole blood has been found measurable at high sensitivities by capillary gas chromatography with surface ionization detection. The drugs could be rapidly extracted by Sep-Pak C₁₈ cartridges with recovery of more than 60%. The calibration curves for both cocaethylene and cocaine using cocapropylene as internal standard were linear in the range 50–300 pmol mL⁻¹ of whole blood. The detection limits of cocaethylene and cocaine were 5–10 pmol mL⁻¹ (0.1–0.2 pmol on column if recovery is 100%). Cocaethylene could be determined for whole blood obtained from rats (ca. 200 g body wt.), which had received subcutaneous injection of 10 mg cocaine hydrochloride and 2.0 mL of 30% (v/v) ethanol 3 h before sampling; the mean levels of cocaethylene and cocaine were 101 and 1230 pmol mL⁻¹, respectively.     

A new analytical methodology for a fast evaluation of semi-volatile polycyclic aromatic hydrocarbons in the vapor phase downstream of a diesel engine particulate filter

A new sampling method was developed to collect vapor-phase polycyclic aromatic compounds (PAHs) downstream of a diesel engine equipped with a diesel particulate filter (DPF). This configuration allowed us to collect separately the particulate phase, which was trapped inside the DPF, and the vapor phase, which was sampled downstream of the DPF. PAHs, which were not predominantly absorbed into the poor organic fraction of the diesel soot, but were rather physically sorbed on high energetic adsorption sites, should be extracted using very drastic extraction conditions Microwave-assisted extraction using solvent mixtures composed of pyridine and diethylamine were used to desorb particulate PAHs, and the total PAH amounts corresponded to a very low value, i.e., 8 μg g⁻¹ or 0.24 μg km⁻¹, with a predominance of low weight PAHs. For collection of the vapor phase, gas bubbling in an aqueous medium was preferred to conventional methods, e.g., trapping on solid sorbents, for several reasons: aqueous trapping allowed us to use a solid phase enrichment process (SPE) that permitted PAH sampling at the sub-picogram levels. Consequently, low volume sampling was possible even if the sampling duration was very short (20 min). Additionally, the amount of time saved for the analysis was considerable when coupling SPE to the analytical system (liquid chromatography with fluorimetric detection). Solvent consumption for the overall sampling and analytical processes was also drastically reduced. Experiments on a diesel engine showed that vapor phase samples collected downstream of the DPF contained all of the 15 target priority PAHs, even the heaviest ones. The total vapor-phase PAH amount was 6.88 μg N m⁻³ or 10.02 μg km⁻¹, which showed that the gaseous fraction contains more PAHs than the particulate fraction. Partitioning coefficients (K_p) were estimated showing the predominance in the vapor phase of all the PAHs. However, the DPF technology effects a considerable decrease in the total PAH emission when compared to non-equipped diesel vehicles.     

Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

Sub-parts-per-billion determination of nitro-substituted polynuclear aromatic hydrocarbons in airborne particulate matter and soil by electron capture-Tandem mass spectrometry

A procedure for the determination of nitro-substituted polynuclear aromatic hydrocarbons (nitro-PAH) on crude air-particulate and soil extracts is introduced. Elimination of purification and fractionation procedures was made possible by the use of both a selective ionization method, such as electron-capture chemical ionization, and a specific fragmentation process, in an experiment of tandem mass spectrometry (gas chromatography-electron capture tandem mass spectrometry). Different mass spectrometric procedures were compared. The best performance was observed when the nitro-PAH molecular ions [M]⁻ were mass-selected by the first analyzer under multiple reaction monitoring conditions and then fragmented to NO⁻₂ (m/z 46). Detection limits were on the order of hundreds of femtograms, as determined in extracts of real environmental samples. This corresponds approximately to 5-15 pg of nitro-PAH per cubic meter of air sampled. Calibration curves were linear over 3 orders of magnitude. Applications to contamination from motor vehicle combustion and the iron industry are briefly discussed.     

Evaluation of capillary gas chromatography for the measurement of hydrocarbons by participating in an intercomparison experiment

Summary By participating in an International Hydrocarbons Intercomparison Experiment, a method for the determination of nonmethane hydrocarbons was evaluated. The method involves Tenax-TA sampling, thermal desorption and preconcentration combined with capillary gas chromatography with flame ionization detection. Sixty target compounds from C₂ to C₁₁ were separated by using a megabore capillary column with a thick film of bonded nonpolar siloxane stationary phase (5 μm, Rtx-1). The unusually thick film in the column was an advantage for resolving light hydrocarbons (C₂−C₃) at room temperature. The percent difference between the National Institute of Standards and Technology (NIST) and our laboratory in the intercomparison experiment is in the range of 0.99%–19.70%.     

Data correlation in on-line solid-phase extraction-gas chromatography-atomic emission/mass spectrometric detection of unknown microcontaminants

Summary A procedure is described for the (non-target) screening of hetero-atom-containing compounds in tap and waste water by correlating data obtained by gas chromatography (GC) using atomic emission (AED) and mass selective (MS) detection. Solid-phase extraction (SPE) was coupled on-line to both GC systems to enable the determination of microcontaminants at the 0.02–1 μg L⁻¹ level in 7–50 mL of aqueous sample. The screening was limited to compounds present in at least one heteroatom-selective GC-AED trace above a predetermined concentration level. These compounds were identified by their partial formulae (AED) and the corresponding mass spectra, which were obtained from the GC-MS chromatogram via the retention index concept. The potential of the approach was demonstrated by the identification of target compounds as well as all unknowns present in tap and waste water above the predetermined threshold of 0.05 μg L⁻¹ (tap water) or 0.5 μg L⁻¹ (waste water).     

Application of direct thermal desorption gas chromatography time-of-flight mass spectrometry for determination of nonpolar organics in low-volume samples from ambient particulate matter and personal samplers

Direct thermal desorption and in-situ derivatization thermal desorption methods in conjunction with gas chromatography time-of-flight mass spectrometry have been characterized and evaluated for analysis of trace components from filters loaded with ambient particulate matter (PM). The limits of quantification were in the range of 7–24 pg for n-alkanes, 20 pg for hopanes, and 4–22 pg for polycyclic aromatic hydrocarbons (PAH). The limit of quantification was defined as the minimum amount of substance that conforms to the minimum distinguishable signal plus 9 times the standard deviation of this background signal from PM-loaded filters. The method has been successfully applied to low-volume samples from ambient PM collected with stationary and personal samplers. Stationary samples were collected in winter 2008 and 2010 in Augsburg, Germany. Sample aliquots of 0.2-0.3 m3 from stationary sampling were analyzed. High diurnal variation in concentration and source contribution was found especially during periods with low wind speed and low mixing layer height. High contributions of solid fuel combustion (wood and coal) were found in evening and nighttime samples, leading to peak PAH concentrations at midnight more than 10 times higher than at noon. Finally, the method was applied to samples collected by means of a personal sampler, i.e. a micro aethalometer, in Xi’an, China. Quantitative data on n-alkanes, hopanes, and PAH were obtained from sample volumes of 17 and 24 l. The impact of different sources such as vehicular and biogenic emissions could be distinguished.     

Probability of failure of the watershed algorithm for peak detection in comprehensive two-dimensional chromatography

The watershed algorithm is the most common method used for peak detection and integration in two-dimensional chromatography. However, the retention time variability in the second dimension may render the algorithm to fail. A study calculating the probabilities of failure of the watershed algorithm was performed. The main objective was to calculate the maximum second-dimension retention time variability, Δ²t_R,crit, above which the algorithm fails. Several models to calculate Δ²t_R,crit were developed and evaluated: (a) exact model; (b) simplified model and (c) simple-modified model. Model (c) gave the best performance and allowed to deduce an analytical expression for the probability of failure of the watershed algorithm as a function of experimental Δ²t_R, modulation time and peak width in the first and second dimensions. It could be demonstrated that the probability of failure of the watershed algorithm under normal conditions in GC × GC is around 15–20%. Small changes of Δ²t_R, modulation time and/or peak width in the first and second dimension could induce subtle changes in the probability of failure of the watershed algorithm. Theoretical equations were verified with experimental results from a diesel sample injected in GC × GC and were found to be in good agreement with the experiments.     

Supercritical fluid chromatography hyphenated with twin comprehensive two-dimensional gas chromatography for ultimate analysis of middle distillates

This paper reports the conditions of online hyphenation of supercritical fluid chromatography (SFC) with twin comprehensive two-dimensional gas chromatography (twin-GC × GC) for detailed characterization of middle distillates; this is essential for a better understanding of reactions involved in refining processes. In this configuration, saturated and unsaturated compounds that have been fractionated by SFC are transferred on two different GC × GC columns sets (twin-GC × GC) placed in the same GC oven. Cryogenic focusing is used for transfer of fractions into the first dimension columns before simultaneous GC × GC analysis of both saturated and unsaturated fractions. The benefits of SFC–twin-GC × GC are demonstrated for the extended alkane, iso-alkane, alkene, naphthenes and aromatics analysis (so-called PIONA analysis) of diesel samples which can be achieved in one single injection. For that purpose, saturated and unsaturated compounds have been separated by SFC using a silver loaded silica column prior to GC × GC analysis. Alkenes and naphthenes are quantitatively recovered in the unsaturated and saturated fractions, respectively, allowing their identification in various diesel samples. Thus, resolution between each class of compounds is significantly improved compared to a single GC × GC run, and for the first time, an extended PIONA analysis of diesel samples is presented.     

A very thick film open-tubular trap for headspace capillary gas chromatography

Summary An open-tubular trap with a very thick film was studied for “full on-line” headspace capillary gas chromatography, and was used as an enrichment trap for headspace sampling. The preparation of the open-tubular column with up to an 80 μm thick film, by combining both static and dynamic coating, is described in detail. The break-through volume for the open-tubular trap of different film thickness, as the loading capacity for HS sampling, does not increase linearly in proportion to the film thickness. A study of the difference between a packed adsorbent trap and an open-tubular trap shows that HS capillary GC with open-tubular trap loses less of the retention capacity, has better resolution ability and higher recovery. By independently and rapidly heating the open-tubular trap, the GC peaks may have higher resolution. Examples of successful analyses, by the opentubular trap with “full on-line” HS capillary GC, include trace aromatic hydrocarbon (1 ppm-100 ppm) in polybutadiene-styrene rubber and trace alcohol and acrylic esters (10 ppm–1000 ppm) in polyacrylate hydrous emulsion.