Comparative study of azobenzene and stilbene bridged crown ether p-tert-butylcalix[4]arene

Photo-switchable calixarenes consisting of a stilbene or azobenzene bridge, spanning the narrow rim as a switching unit, were synthesized through reductive coupling of o-, m- and p-bis-benzaldehyde and bis-nitrobenzene-substituted calix[4]arenes. Both cis- and trans-stilbenes were produced from the reductive coupling of the o- and m-bis-benzaldehyde with the cis isomer being predominant for both regioisomers, whilst the coupling of p-bis-benzaldehyde gave only cis product. On the other hand, the only isolable product obtained from the reductive coupling of bis-o- and bis-m-nitrobenzene was the corresponding trans-azobenzene and the coupling product from bis-p-nitrobenzene was not stable. Each of the synthesized compounds showed a photostationary state in their cis-trans isomerization. The complexation of alkali metal ions was observed for only the o-azobenzene derivative suggesting that the lone pair of N-atom in the azo bridge participates in this process.     

CHARACTERIZATION OF CIS- AND TRANS-DINITROBIS-(l-CYCLOHEXANEDIAMINE)-COBALT(III) CHLORIDE1

Abstract

Two geometrical isomers of [Co(l-chxn)₂(No₂)₂]Cl have been isolated. The trans-isomer is eluted first from a cellulose ion exchange column as a single isomer. The cis-isomer corresponds to the complex previously reported as the trans-isomer. The cis-isomer with the same CD sign pattern as for the trans-isomer is stereoselectively favored, but a small amount of the second cis-isomer separates using Cellex CM ion exchange cellulose. The CD spectra of the cis- and trans- isomers are similar to those of the corresponding isomers of the l-pn complex.     

Solid-State Photochromism by Molecular Assembly of Bis-o-carboranyl Siloles

A new type of solid-state photochromism was observed in an AB₂-type molecular assembly comprising a central silole and two peripheral o-carborane units, and in this assembly, depending on the assembling positions of those units at the adjoining benzene ring, two different regioisomers were formed: Si-m-Cb and Si-p-Cb . Each isomer showed different solid-state photochromism depending on its solid-state molecular conformation and was either in the crystalline or amorphous state. The crystals of each meta- or para-isomer, C_Si-m-Cb or C_Si-p-Cb, showed yellow or blue emission, and mechanically grinding those crystals into amorphous powders of A_Si-m-Cb and A_Si-p-Cb, switched their emissions to blue and yellow, respectively. Photophysical studies revealed that the electronic interaction between silole and o-carborane units determined the emission color. The crystal and DFT-optimized structures each account for the crystalline and amorphous structures, respectively, and are correlated well with the electronic interactions in the molecular assembly in the solid state, thus enabling the prediction of the solid-state molecular conformational change.     

Thermal stability of para- and ortho-isomers of tris-decyl-(ethyl-benzyl)-ammonium chloride

Thermal stability of para (p--) and ortho (o-) isomers was investigated by CRTG and reaction kinetic analysis. The temperature started the mass decrease of o-isomer was about 20°C lower than that of p-isomer by CRTG. The activation energies of thermal decomposition of o- and p-isomers were 136.9 and 153.4 kJ mol^–1, respectively. The effect of steric hindrance on heat of formation was calculated by AM1 method using Win MOPAC3.0 for the model compound of p- and o-isomers. The lower stability of o-isomer was the results of the steric hindrance between the ethylene unit of aromatic ring and three alkyl chains.     

Further investigations of the interaction of trimethylsilyl azide with substituted maleic anhydrides. Synthesis of 4- and 5-aryl substituted 1,3-(3H)oxazine-2,6-diones

The reactions of phenyl-, o-chlorophenyl-, p-chlorophenyl-, 3,4-dichlorophenyl-, p-fluoro- and p-anisylmaleic anhydrides with trimethylsilyl azide are described. In all cases mixtures of isomeric 4- and 5-aryl-2H-1,3-(3H)oxazine-2,6-diones are obtained after hydrolysis with the 4-isomer predominating. The yield of 5-isomer is greatest for o-chlorophenyl maleic anhydride, and substantial for other arylmaleic anhydrides, indicating increased importance of steric effects in these reactions, in contrast to previously reported syntheses of methyl and halo-substituted oxazine-diones, where electronic factors appeared dominant.     

On the CO elimination from [M – CH3]+ ions in substituted phenyl methyl ethers

It was inferred from the collisional activation spectra that CO loss from [M – CH₃]⁺ ions generated from o-,m- and p-cyanoanisole yields a common ion, presumably the cyanocyclopentadienyl cation. A similar product ion is found to be generated in the three dimethoxybenzene isomers. In case of o-dimethoxybenzene loss of CO was also found to occur via an important additional route, which leads to the formation of protonated phenol.     

Formation of ring-retaining products from the OH radical-initated reactions of o-, m-, and p-xylene

The ring-retaining products formed from the OH radical-initiated reactions of o-, m-, and p-xylene in the presence of NO_x have been identified and their formation yields determined. Experiments were carried out at 298 ± 2 K and in the presence of 740 torr total pressure of air. The products observed, and their yields, were: from o-xylene, o-tolualdehyde, 0.0453; 2-methylbenzyl nitrate, (0.0135 + 5.5 × 10^?17 [NO₂]); 2,3-dimethylphenol, 0.097; 3,4-dimethyl-phenol, 0.064; 3-nitro-o-xylene, 0.0059; 4-nitro-o-xylene, (0.0111 + 9.9 × 10^?17 [NO₂]); from m-xylene, m-tolualdehyde, 0.0331; 3-methylbenzyl nitrate, 0.0061; 2,4-dimethylphenol, 0.099; 2,6-dimethylphenol, 0.111; 4-nitro-m-xylene, 0.0018; 5-nitro-m-xylene, (0.0032 + 1.6 × 10^?17 [NO₂]); from p-xylene, p-tolualdehyde, 0.0701; 4-methylbenzyl nitrate, 0.0082; 2,5-dimethylphenol, 0.188, 2-nitro-p-xylene, (0.0120 + 2.8 × 10^?17 [NO₂]), where the NO₂ concentration is in molecule cm^?3 units. The nitro-xylene data are consistent with our recent product study of the corresponding reactions of benzene and toluene and indicate that under the experimental conditions employed the dimethylhydroxycyclohexadienyl radicals reacted with NO₂ and not with O₂. When combined with literature ring-cleavage product yields, these data show that ca. 55–80% of the reaction pathways are accounted for.     

Synthesis of (±)-trans-2,5-Dialkylpyrrolidines from the Lukes-Šorm Dilactam: Efficient Preparation of (±)-trans-2-Butyl-5-heptylpyrrolidine and Analogs Present in Ant Venoms

A 7-step synthesis of (±)-trans-2-butyl-5-heptylpyrrolidine ( 14 ) from the Lukes-?orm dilactam 1 was accomplished in 6% overall yield without counting for a reconversion of cis-isomer 13 into trans-isomer 14 which was also accomplished. Reduction of pyrroline 12 , the precursor of 14, with NaBH₄ afforded a 1:1 mixture of cis-isomer 13 and trans-isomer 14 separated by chromatography. Reductive N-methylation of 14 afforded the N-methyl analog 15 , another ant alkaloid. The synthetic route to 14 was extended to a similar synthesis of analogs 23 – 25 and is representative for the synthesis of trans-2,5-diakyl-substituted pyrrolidines. Results on the screening of a few compounds for the effect on vascular permeability are reported.     

Effect of methoxy position on dynamic mechanical and shape memory properties of methoxyphenol-based polybenzoxazines

Abstract

Two series of benzoxazines were synthesized from o-, m-, and p-methoxyphenols, two polyetheramines with different molecular weights, and formaldehyde. The glass transition temperatures (T _gs) of m-methoxyphenol-based polybenzoxazines are respectively higher than those of o- and p-methoxyphenol-based counterparts. The polybenzoxazines exhibit thermally induced one-way dual-shape memory behavior based on T _g, and the o- and p-methoxyphenol-based polybenzoxazines exhibit higher shape memory performance than m-methoxyphenol-based counterparts under motion constraints.     

NMR Studies of ortho and meta- fluorocinnamate-α-chymotrypsin complexes

Fluorine magnetic resonance spectroscopy has been used to examine the complexes formed between o- and m-fluorocinnamate ions and the enzyme α-chymotrypsin. Study of the frequency dependence of fluorine spin-lattice and spin-spin relaxation rates suggests that, like the p-isomer, both the o- and m-fluorocinnamates bind equally well to monomeric, dimeric and trimeric forms of the protein. Dipole-dipole interactions with protons of the enzyme play an important role in relaxing the protein-bound fluorine nucleus. Various deuterated forms of the ortho isomer were used to obtain evidence suggesting that the conformation of this molecule bound to the enzyme is similar if not identical to the conformation found in free solution. NMR methods were used to estimate the rates of dissociation of the complexes and the chemical shifts of the bound fluorine atoms were determined to be substantially downfield of their positions in the absence of enzyme.     

Solvent effects on the proton magnetic resonance spectra of p-substituted phenyltin chlorides

A PMR study of solvent effects on some p-substituted phenyltin chlorides (substituents = CH₃, (CH₃)₃C, CH₃O) is reported. Co-ordination of solvent molecules to the tin atom leads to an unusual low field shift of the o-ring protons. The results for p-tolytin trichloride have been compared with those for p-tolylsilyl trichloride and discussed. In o-, m- and p-tolyltin trichlorides long range spin-spin couplings between the ring methyl protons and the tin atom have been observed. The order of magnitude is o- > p- > m-methyl protons.     

Formation and stability of gaseous tolyl ions

Collisional activation mass spectra confirm that tolyl ions can be produced from a variety of CH₃C₆H₄Y compounds. High purity o-, m- and p-tolyl ions are prepared by chemical ionization of the corresponding fluorides (Y=F) as proposed by Harrison. In electron ionization of CH₃C₆H₄Y formation of the more stable tropylium and benzyl ionic isomers usually accompanies that of the o-, m- and p-tolyl ions. Isomerization of low energy [CH₃C₆H₄Y]⁺? to [Y–methylenecyclohexadiene]⁺? is proposed to account for most [benzyl]⁺ formation, while the tropylium ion appears to arise from the isomerization of tolyl ions formed with higher internal energies, [o-, m-, p-tolyl]⁺→ [benzyl]⁺→ [tropylium]⁺, consistent with Dewar's predictions from MINDO/3 calculations.     

A pronounced ortho effect in the polymerization of o-substituted β-nitrostyrenes

It was shown in a previous paper that a number of m - and p-substituted β-nitrostyrenes would readily undergo polymerization via anionic initiation with alkoxide ions to yield high polymers, whereas, in all cases, the corresponding o-substituted isomers could not be induced to produce polymers under any conditions tried. This article reports a systematic study of this unexpected “ortho effect” based on the initial postulate that the effect was the result of steric inhibition of the propagation step that would ordinarily lead to polymer. Since the fluorine atom is only slightly larger than the hydrogen atom, the series o-, m-, and p-fluoro-β-nitrostyrenes was synthesized and its alkoxide ion-initiated polymerization studied. Although it was shown in all cases of o-substituted β-nitrostyrenes studied that initiation was rapid, only in the case of o-fluoro-β-nitrostyrene was a substantial amount of polymer obtained. With up to 3 mole % initiator a maximum of 26% polymer was obtained, whereas polymerization was rapid in cases of the meta and para isomers. The values of the propagation rate constants k_p were found to be 1.1 liters/mole-sec for the para isomer as compared with 4.8 × 10^?2 liter/mole-sec for the ortho isomer for a ratio k_p(p)/k_p(o) = 23, the magnitude of this ortho effect for the fluorine atom.     

Radical polymerization behavior of hydroxystyrenes

Homopolymerizations of m- and p-hydroxystyrene and their copolymerizations with styrene and methyl methacrylate by use of azobisisobutyronitrile as initiator were investigated, and the results were compared with those obtained previously o-hydroxystyrene. Intrinsic viscosities of m- and p-hydroxystyrene polymers obtained by bulk and solution polymerizations were ca. 2 to 3 times larger than those of o-hydroxystyrene polymers obtained by the similar conditions. The structures of the polymers thus produced were investigated by infrared and ultraviolet spectroscopy. These studies suggested that all of the homopolymers consisted mainly of structures of normal vinyl type polymer. R_p was proportional to [I]^0.52 for m-hydroxystyrene and to [I]^0.50 for p-hydroxystyrene, for o-hydroxystyrene R_p was proportional to [I]^0.72. A reasonable chain transfer mechanism for these monomers was postulated. The apparent activation energies of polymerization for m- and p-hydroxystyrene were found to be 20.1, and 18.0 kcal/mole, respectively, compared to the value of 21.5 kcal/mole for o-hydroxystyrene. Monomer reactivity ratios and Q ? e values for m- and p-hydroxystyrene were determined, and the results were also compared with the case of o-hydroxystyrene. Copolymerization generally gave a polymer with relatively high intrinsic viscosity, even in the case of o-hydroxystyrene.     

Thermally Induced trans-to-cis Isomerization and Its Photoinduced Reversal Monitored using Absorption and Luminescence: Cooperative Effect of Metal Coordination and Steric Substituent

For ethene derivatives with large groups the cis-isomer is often quite unstable and unavailable. Herein, we report an exception of two stable coordination complexes, (cis- L )ZnCl₂, starting from trans-1,2-bis(1-R-benzo[d]imidazol-2-yl)ethene (R=H, L1 ; R=CH₃, L2 ) ligands under solvothermal condition (T ≥140 °C). Using the intensity of the absorption and luminescence spectra as probes we proposed its progressive cis-to-trans reversal upon irradiation with UV light, which was confirmed by powder X-ray diffraction (PXRD). Similar results observed in the series of (cis- L2 )M^IICl₂ [M=Fe ( 4 ), Co ( 5 ), Ni ( 6 )] demonstrate the universal strategy. The results of PXRD, NMR spectroscopy, ESI-MS and DFT calculations support the above conclusion. NMR spectroscopy indicates that irradiation of 1 converts an optimized 71 % of the cis-isomer to trans, whereas the free trans- L1 ligand transforms to only 15 % cis-isomer under similar conditions.     

Thermal decomposition of 4,4′-isopropylidene bis-2,6-dibromophenol (tetrabromobisphenol-A)

The thermal decomposition of tetrabromobisphenol-A (TBBPA) was found to proceed via an autocatalytic free-radical process. The major products of the decomposition are HBr; mono-, di- and tribromobisphenol-A; phenol; mono-, di-, and tribromophenol; and eventually, char. It was generally found that o- and p-halophenols are thermally unstable. In contrast, the m-bromophenol, 3,5-dibromo-2,4,6-trimethylphenol (dibromomesitol) was found to be quite stable. In addition, o- and p-halo-substituted phenols were found to react with LiI at 250°C to produce I₂, while m-halophenols did not. These results are explained by the formation from o- and p-halo-substituted phenols of a reactive halocyclohexadienone.     

Iridium-Catalyzed Regioselective B(3)-Alkenylation/B(3,6)-Dialkenylation of o-Carboranes by Direct B−H Activation

Iridium-catalyzed formal alkyne hydroboration with cage B−H of o-carborane has been achieved, leading to the controlled synthesis of a series of 3,6-[trans-(AlkCH=CH)]₂-o-carboranes (Alk=alkyl), 3-cis-(ArCH=CH)-o-carboranes (Ar=aryl), and 3-cis-(ArCH=CH)-6-trans-(AlkCH=CH)-o-carboranes in high yields with excellent regio- and very good cis–trans selectivity. The most electron-deficient B(3,6)−H vertices favor oxidative addition on electron-rich metal centers, which is responsible for the regioselectivity. On the other hand, the configuration of the resultant olefinic units is dominated by alkyne substituents. Alkyl groups lead to a trans-configuration whereas bulky aryl substitutions result in cis-configuration.     

Adiabatic <Emphasis Type="Italic">trans-cis</Emphasis> photoisomerization and photocyclization of 8-styrylquinoline

Kinetics of the photocyclization of trans-8-styrylquinoline into 10a,10b-dihydronaphtho[1,2-h]quinoline (4-azachrysene) was studied in hexane. It was found that in addition to the expected two-step (two-quantum) route with trans-cis photoisomerization occurring in the first step with a quantum yield of φ_tc = 0.13 with consequent photocyclization of the cis-isomer with a quantum yield of 0.23. The direct singlequantum photocyclization of the trans-isomer with a quantum yield of 0.009 is also observed. The latter observation indicates that the excited trans-isomer isomerizes without loss of excitation to the excited cis-isomer, which then undergoes cyclization, i.e., the trans-cis photoisomerization proceeds partially by adiabatic mechanism t* → c*.     

Spectroscopic and magnetic properties of Cu(II) complexes with selected biologically important ligands

The aim of this work was to study the spectroscopic and magnetic properties of copper(II) o-, m-, p-aminobenzoates, o-, m-, p-methoxybenzoates and o-, m- and p-nitrobenzoates. The complexes were synthesized and their compositions were evaluated by elementary analysis. The infrared and Raman spectra for Cu(II) aminobenzoates, methoxybenzoates and nitrobenzoates were recorded and assigned. The obtained data were compared with those previously published for aminobenzoic, methoxybenzoic and nitrobenzoic acids and their sodium salts. The structures of Cu(II) o-, m-, p-aminobenzoates, o-, m-, p-methoxybenzoates and o-, m- and p-nitrobenzoates as well as the change in the electronic charges distribution caused by Cu(II) complex formation were discussed.     

Kinetics and mechanism of chlorination of toluene and some substituted toluenes by chloramine-T

The kinetics of chlorination of toluene, o-methyl toluene, p-methyl toluene, m-methyl toluene, and m-chlorotoluene by chloramine-T(CAT) in aqueous acetic acid in the presence of HClO₄ have been studied. The reaction is first order with respect to [CAT] as well as [H⁺]. The order with respect to the substrate is unity in the case of toluene and m-chlorotoluene, fractional in the case of o-methyl toluene and p-methyl toluene, and zero order in the case of m-methyl toluene. Nuclear halogenation has been observed with m-methyl toluene, while nuclear and side-chain halogenation for p-methyl toluene and o-methyl toluene, and sidechain halogenation for toluene and m-chlorotoluene are the pathways. An increase in the proportion of acetic acid accelerates the rate. Added acetate ions inhibit the reaction, and added p-toluene sulfonamide causes a pronounced retardation. A mechanism involving AcO⁺HCl as the important electrophile is discussed.