Anionic graft polymerization of ethylene oxide on starch. I

Graft polymers of polyethylene oxide on various starches were obtained by anionic graft polymerization of ethylene oxide on the starch alkoxide derivatives. The polyalkoxides were prepared by reaction of potassium naphthalene with starch in DMSO solution. It was found that increase of monomer or alkoxide concentration led to transformation of the grafts from solids to syrups. Rice starch, having a more complex structure than soluble starch or wheat starch, led to graft polymers having higher melting ranges than the others. The graft polymers were very soluble in water or methanol.     

Anionic graft polymerization of methyl methacrylate on starch and dextrin

The anionic graft polymerization of methyl methacrylate on the potassium alkoxide derivative of starch or dextrin in DMSO was studied. The effects of monomer and alkoxide concentrations as well as temperature were investigated. The yield of graft polymer increased with increasing alkoxide concentration. With increasing monomer concentration and with increasing temperature the extent of homopolymer formation increased. The composition of the graft polymers was found to depend on the reaction conditions. Graft polymers having about 10–40% poly(methyl methacrylate) were obtained. There were quantitative differences in yield of isolated graft polymer between starch and dextrin and these were ascribed to differences in the solubility properties of the carbohydrates. Evidence on the structure of the graft polymers and on the mechanism of the graft polymerization was obtained from acid hydrolysis of the graft polymers and determination of the molecular weights of the cleaved side chains.     

Anionic graft polymerization of methacrylonitrile on potassium starch alkoxide

The anionic graft polymerization of methacrylonitrile on potassium starch alkoxide in dimethyl sulfoxide was studied. Factors affecting the graft polymerization such as monomer and alkoxide concentrations as well as temperature were investigated. The yield of the graft polymers was found to increase with alkoxide concentration, and it was possible to incorporate all the starch into graft polymer. On increasing the monomer concentration the graft polymer yield increased to a flat maximum. At the higher monomer concentrations, the efficiency of monomer in giving graft polymer decreased due to increased homopolymer formation. The composition of the graft polymers varied with increasing monomer concentration, graft polymers having about 40–65% of grafted starch were obtained. With increasing temperature (10 to 60°C), the yield of graft polymer decreased, there was more homopolymerization, but the amount of starch incorporated in the graft remained constant. The structure of the graft polymers was deduced from hydrolysis of the starch backbone of the graft polymers by dilute mineral acid and the determination of the molecular weights of the grafted side chains, and from oxidation by periodic acid, which showed the extent of grafting at the secondary hydroxyl groups. These results have shown that by anionic graft polymerization it is possible to obtain graft polymers having more densely packed grafted side chains of relatively low molecular weights than those obtained previously by free-radical graft polymerization.     

Observations on the Anionic Polymerization of Ethylene Oxide by Alkali Metal Naphthalene and Anthracene Complexes

The anionic polymerization of ethylene oxide by alkali metal naphthalenes and anthracenes was studied in DMSO and THF to determine the effects of solvent and of polycyclic hydrocarbon, and to obtain information on the mode of initiation. No propagation occurred with lithium naphthalene, and this made it possible to isolate mono- and dihydroxyethyl naphthalene, the species formed on initiation.

The molecular weights obtained in the presence of DMSO were about half those obtained in THF, and were proportional to [monomer]/[initiator]. This was explained as being due to differences in initiation; i.e., formation of dimsyl anion as the true initiator in DMSO. The rate of polymerization was first order to monomer, and the molecular weights were found to increase linearly with percent inversion.     

Grafting of poly(glycidyl methacrylate) onto alginic acid

Grafting of poly(glycidyl methacrylate) (PGMA) onto alginic acid was carried out using ceric ammonium nitrate as initiator, using various concentrations of monomer and initiator, and various temperatures and times. Percentage grafting, grafting efficiency and rates of polymerization, graft copolymerization and homopolymerization were evaluated in all cases. Infrared spectra for pure alginic acid, poly(glycidyl methacrylate) and the alginic acid-poly(glycidyl methacrylate) were taken to establish the occurrence of grafting. Differential scanning calorimetry was carried out for alginic acid, poly(glycidyl methacrylate), the graft copolymer and the physical mixture to establish evidence for grafting.     

Anionic graft polymerization of ethylene oxide on starch. II. Structure of the graft polymers

Starch–poly(ethylene oxide) graft polymers were prepared in DMSO at various monomer and starch alkoxide concentrations. Complimentary and varied information on the structure of the graft polymers was obtained from NMR and periodic acid oxidation of the polymers. From the NMR spectra of the graft polymers in pyridine containing a trace of HCl, which causes shifting of the resonance of the internal ? CH₂O? protons from the terminal ? CH₂OH protons, the polyethylene oxide content, the DP _n of the grafted side chains, and the efficiency of the alkoxides were calculated. With increase of the alkoxide concentration there was a small decrease in ? DP _n, and in the efficiency of the alkoxides in initiating graft polymerization. With increase of monomer concentration, there was only a small increase in ? DP _n but a large increase in the efficiency, indicating the existence of transfer reactions between the growing anions and the free hydroxyl groups on the starch. The results of he periodic acid oxidation showed that with increase of alkoxide concentration there was no significant change in the per cent oxidation of the graft polymers, but with increase of monomer, there was an increase in the participation of the secondary hydroxyl groups in initiation. This supports the NMR evidence for the existence of transfer reactions leading to ? DP _n values much lower than those calculated from [monomer]/[catalyst] ratios.     

Study on the initiation step of 2-(9-carbazolyl)ethyl glycidyl ether polymerization by K, K (15-crown-5)2

Several reactions occur during the initiation of 2-(9-carbazolyl)ethyl glycidyl ether polymerization by K⁻, K⁺ (15-crown-5)₂. At first the oxirane ring is opened mainly in the β-position. An organometallic intermediate obtained cleaved then the linear ether bond in the substituent and the cyclic one in crown ether. Various potassium alkoxides are finally formed. They are the real initiators of the polymerization. 9-Vinylcarbazole being another reaction product is inactive in this process.     

Poly(allyl glycidyl ether)-A versatile and functional polyether platform

Allyl glycidyl ether, polymerized from potassium alkoxide/naphthalenide initiators under both neat and solution conditions was shown to be a highly-controlled process. In both cases, molar masses (10-100 kg/mol) were determined by the reaction stoichiometry, and low polydispersity indices (1.05-1.33) could be obtained with a full understanding of the dominant side reaction, isomerization of the allyl side chain, being developed. The degree of isomerization of allyl to cis-prop-1-enyl ether groups (0 - 10 % mol.) was not correlated to the molar mass or polydispersity of the polymer but was dictated by the polymerization temperature. This allows the extent of isomerization to be reduced to essentially zero under either melt or solution conditions at polymerization temperatures of less than 40 °C.     

Activation Mechanisms of Trialkylaluminum in Alkali Metal Alkoxides or Tetraalkylammonium Salts / Propylene Oxide Controlled Anionic Polymerization

The anionic polymerization of propylene oxide (PO) initiated by alkali metal alkoxides is in non polar solvents a very slow and non controlled reaction process. Transfer reaction to monomer is predominant, allowing only the preparation of low molar masses PPO. The influence of the addition of trialkylaluminium to either an alkali metal alkoxide or a tetraalkylammonium salt used as initiator for PO polymerization in hydrocarbon media was investigated. A strong enhancement of the polymerization rate accompanied by a drastic decrease of the transfer reactions is observed, allowing the synthesis of PPO with well controlled molar masses. At constant monomer and alkali metal alkoxide concentrations, the polymerization rate increases with increasing trialkylaluminium concentration. Results indicate that the trialkylaluminium derivative is involved in the formation of two distinct complexes, one with the alkali metal alkoxide or the tetraalkylammonium salt and another one with the PO monomer which is strongly activated towards nucleophilic active species. Significant differences between the alkali metal and tetraalkylammonium based initiators are observed. In particular much less trialkylaluminum activator is needed with the ammonium salt to get the same rate of propagation and controlled polymerization.     

Polymerization of acrylonitrile initiated by KO2- nitrobenzene

Polymerization of acrylonitrile initiated by a potassium superoxide (KO₂)-nitrobenzene system was carried out in anhydrous dimethylsulfoxide (DMSO) at 25°C. The initial rate of polymerization was rapid and a high-molecular-weight polymer was obtained. The molecular weight was proportional to monomer concentration and inversely to concentration of initiator within 5 min. The overall activation energy was estimated as ?2.6kcal/mol deg in the temperature range of 20–50°C. In addition to nitrobenzene anion radical, other anion radicals generated by one-electron transfer from KO₂ to charge transfer agents such as m-dinitrobenzene benzoquinone, benzophenone, and naphthalene were effective in the polymerization of acrylonitrile. It is proposed that polymerization proceeds via an anionic mechanism that involves one-electron transfer from anion radicals to monomer.     

Anionic polymerization of propylene oxide

The anionic polymerization of propylene oxide with the use of potassium tert-butoxide and naphthalene sodium as initiator and dimethylsulfoxide, tetrahydrofuran and mixtures of both as solvent was investigated. The reactions were carried out in vacuum-sealed dilatometers over the temperature range 20?60°C. The products were analyzed by gelpermeation chromatography and infrared spectroscopy. The object of the investigation was to obtain information on the mechanism of the reaction and elucidate some of its kinetic aspects. It is shown that the polymerization occurs by two different processes depending on the experimental conditions: one involving free ions and ion-pairs, the other, ion-pairs alone. In the first case, where DMSO was used as solvent, the order of the reaction with respect to the initiator is greater than unity (～1.7), while in the second case, involving the mixture of DMSO and THF and ion-pairs alone, the reaction order is only one. Transfer to monomer is believed to take place only in the strongly dissociating DMSO medium, where free ions are present.     

淀粉乙酸酯的阴离子接枝己内酯聚合研究

将淀粉在二甲基甲酰胺、吡啶存在下 ,以乙酸酐进行部分乙酰化 ,制备取代度为 0 7～ 1 9的淀粉乙酸酯 (St Ac) .以萘钠与淀粉乙酸酯中残余的羟基反应 ,将羟基转化为醇盐 (ONa) ,引发己内酯进行阴离子开环接枝聚合 ,合成了淀粉 聚己内酯接枝共聚物 (St g PCL) .采用凝胶渗透色谱法 (GPC)研究了接枝前后聚合物分子量的变化情况 ,并以接枝率、单体转化率对接枝反应进行了表征 .研究了接枝条件如温度、溶剂、引发剂和单体的用量对接枝率及单体转化率的影响 .研究发现随着反应温度升高 ,接枝率、单体转化率呈S曲线变化 ,单体浓度、引发剂浓度的增大有利于接枝反应的进行 .     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry study on copolymers obtained by the alternating copolymerization of bis(γ‐lactone) and epoxide with potassium tert‐butoxide

Oligomer samples obtained by the anionic copolymerization of a bis(γ‐lactone), 2,8‐dioxa‐1‐methylbicyclo[3.3.0]octane‐3,7‐dione ( 1 ), and glycidyl phenyl ether with potassium tert‐butoxide have been analyzed by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. The MALDI‐TOF mass spectra of these cooligomers show well‐resolved signals that can be reliably assigned to linear, alternating cooligomers that have carboxylate chain ends or alkoxide chain ends and cyclic ones. The formation of these three series of cooligomers suggests that the polymerization process involves concomitant intermolecular transesterification and intramolecular back‐biting. The intramolecular back‐biting reaction causes the formation of cyclic cooligomers, whereas the intermolecular transesterification causes the reduction of the molecular weight and the transformation of the alkoxide active chain end into a carboxylate chain end. The MALDI‐TOF mass spectrometry study has shown that an excess of monomer 1 enhances the selectivity of propagation by increasing the probability of the attack of the alkoxide chain end to 1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2643–2649, 2005     

烷基功能化聚烯丙基缩水甘油醚的制备及对PVC的增塑及抗静电作用

利用阴离子开环聚合(AROP)及巯基-烯点击反应相结合的路线构筑了一种新型烷基功能化聚醚, 考察了其对聚氯乙烯(PVC)的增塑及抗静电作用. 首先, 以烯丙基缩水甘油醚为单体, 利用AROP制备聚烯丙基缩水甘油醚(PAGE)中间产物; 然后, 以PAGE为前驱体, 借助巯基-烯点击反应将柔性烷基引入其侧链, 获得烷基功能化聚烯丙基缩水甘油醚(PAGE_butane)目标产物. 核磁共振波谱(NMR)及凝胶渗透色谱(GPC)结果表明, 所得聚合物结构与设计一致, 且PAGE的分子量可通过改变单体与引发剂的投料比灵活调控. 热性能研究结果显示柔性烷基的键入导致PAGE的玻璃化转变温度(T_g)进一步降低. PAGE_butane的T_g为-74.97 ℃, 且具有较好的热稳定性. PAGE_butane在不损失PVC强度的同时可明显提升其韧性, 同时可有效降低其表面电阻率, 产生一定的抗静电效果. 与邻苯二甲酸二(2-乙基)己酯(DOP)增塑剂相比, PAGE_butane体现出更优异的耐抽出及耐挥发性.     

Titanium alkoxides as initiators for the controlled polymerization of lactide

Fourteen titanium alkoxides were synthesized for comparison of their catalytic properties in the bulk and solution polymerization of lactide (LA). In bulk polymerizations, they are effective catalysts in terms of polymer yield and molecular weight. Titanatranes gave polylactides with significantly increased molecular weight over more extended polymerization times, and those with five-membered rings afforded polymers in higher yields and with larger molecular weights than their six-membered ring counterparts. Steric hindrance of the rings was found to significantly affect polymer yields. Increased heterotactic-biased poly(rac-LA) was formed as the number of chlorine atoms increased in TiCl(x)(O-i-Pr)(4)(-)(x). In solution polymerizations, titanium alkoxides catalyzed controlled polymerizations of LA, and end group analysis demonstrated that an alkoxide substituent on the titanium atom acted as the initiator. That polymerization is controlled under our conditions was shown by the linearity of molecular weight versus conversion. A tendency toward formation of heterotactic-biased poly(rac-LA) was observed in the solution polymerizations. The rate of ring-opening polymerization (ROP) and the molecular weight of the polymers are greatly influenced by the substituents on the catalyst, as well as by factors such as the polymerization temperature, polymerization time, and concentration of monomer and catalyst.     

Oligomerization of Substituted Phenyl Glycidyl Ethers with Tertiary Amine

The oligomerization of substituted phenyl glycidyl ethers was studied kinetically in the presence of dimethylbenzylamine using toluene or dioxane as a solvent. The infrared spectra of the resultant oligomers suggest that the reaction products have the internal carbon-carbon double-bond un-saturation, which is confirmed by the catalytic hydrogenation. The molecular weights of the oligomers also suggest that γ-phenoxy allyl alcohol produced by the initial reaction step, in which the γ-proton of phenyl glycidyl ether is attracted by a base, amine, reacts with other phenyl glycidyl ether and thus proceeds further, yielding the oligomer. The value of the reaction constant ρ is obtained positive for this reaction, which indicates that electron-withdrawing substituents of phenyl gylcidyl ethers increase the rate of oligomerization. A kinetic analysis shows that the proposed reaction sequence accounts for all the characteristics of the polymerization including sigmoidal shapes of monomer consumption curves, reaction rates, and induction periods.     

Anionic graft polymerization of lithiated poly(2,6-dimethyl-1,4-phenylene ether)

Lithiated poly(2,6-dimethyl-1,4-phenylene ether) has been used as an initiator for the graft polymerization of isoprene, methyl methacrylate, hexamethylcyclotrisiloxane, and phenyl isocyanate with the use of toluene and tetrahydrofuran as solvents. The products were examined by gel-permeation chromatography for evidence of homopolymerization and graft polymerization. The composition of the graft copolymers was determined by NMR, and for isoprene and hexamethylcyclotrisiloxane, termination by trialkylchlorosilanes enabled chain lengths to be determined by NMR. The use of toluene gave rise to some homopolymerization, but with tetrahydrofuran, only hexamethylcyclotrisiloxane gave homopolymer. In all cases, graft copolymers were formed. With isoprene and methyl methacrylate, soluble graft copolymers were formed in good yield. In the former case approximately 60% 3,4 and 40% 1,4 addition was found. In the latter case 1,1-diphenylethylene was used to reduce crosslinking, in its absence, methyl methacrylate gave only crosslinked gels in tetrahydrofuran. Hexamethylcyclotrisiloxane added only one molecule per lithium on the polymer, the remainder giving homopolymer. Phenyl isocyanate gave some soluble graft copolymer in toluene, but only crosslinked products were obtained when tetrahydrofuran was used as reaction solvent.     

Polymerization of vinyl monomers initiated by KO2–charge transfer agent systems. II

Vinyl monomers having electron acceptor groups such as nitroethylene, acrylonitrile, and acrolein were polymerized by KO₂–charge transfer agent initiator systems in dimethylsulfoxide (DMSO) at 25°C. The new initiator systems were found to be stable for almost 1 month under nitrogen atmosphere. The initial rate of polymerization was so fast that both conversion and molecular weight of the polymers obtained were high. Especially their molecular weight distribution was observed to be very narrow by means of gel permeation chromatography (GPC). The anion radicals generated by one electron transfer from potassium superoxide (KO₂) to charge transfer agents such as naphthalene, benzoquinone, azobenzene, etc., were suitable as initiator for the anionic polymerization of electron acceptor monomers. Study on block copolymerization of nitroethylene with acrylonitrile or acrolein was also attempted.     

醇铁化合物引发丙交酯开环聚合的研究

分别以乙醇铁、正丙醇铁、异丙醇铁、正丁醇铁为引发剂进行D,L-丙交酯和L-丙交酯的本体开环聚合,研究了在130℃的聚合温度下引发剂用量和聚合时间对聚合反应的影响.结果表明这些醇铁化合物对丙交酯开环聚合都有较好的引发作用;聚合36h,单体转化率可达90%以上.单体转化率在引发剂/单体摩尔比为1/1000时最高,然后随引发剂用量增加和聚合时间延长而降低.乙醇铁表现出最高的引发活性,聚合产物的相对粘均分子量最高可达7·28×104[聚(D,L-丙交酯)]和19·00×104[聚(L-丙交酯)].醇盐配体对聚合产物的分子量和分子量分布影响显著,随醇铁配体体积增大,聚合产物的分子量逐渐降低,分子量分布也逐渐加宽.1H和13C-NMR分析表明醇铁对L-丙交酯的开环聚合没有发生消旋化,对D,L-丙交酯的开环聚合有一定的等规加成选择性.MALDI-TOF MS分析指出D,L-丙交酯在开环聚合过程中发生了分子间的酯交换反应,用13C-NMR评价了各醇铁引发体系在聚合过程中的酯交换程度.但基于谱峰分辨原因,醇铁配体对立构加成选择性和酯交换的影响的规律性不明显.     

Graft Copolymerization of Methyl Methacrylate on Potato Starch Using Potassium Trioxalatomanganate,K3[Mn(C2O4)3], as Initiator

Graft copolymerization of methyl methacrylate on potato starch was carried out in methanol-water medium at 35°C in the dark using potassium trioxalatomanganate, K₃[Mn(C₂O₄)₃], as initiator. The effect of different methanol-water ratios (v/v), the temperature of polymerization, the initiator concentration, the monomer concentration, the starch content, and the time of polymerization were studied. Percent total conversion, % grafting, and grafting efficiency (%) under different conditions were evaluated and compared. High grafting efficiency (～80%), high % total conversion (～85%), and high % grafting (-95%) were readily obtained. The reaction mechanism for graft copolymer formation is discussed.