Polyrotaxane approach for synthesis of continuous beds for capillary electrochromatography

The polyrotaxane formation approach was evaluated for synthesis of continuous beds for capillary electrochromatography. This approach has the advantage of generating diverse electroosmotic and chromatographic properties without chemical reactions. The polyrotaxane derivatized continuous beds were formed adding the macrocyclic compounds to the solution of neutral acrylic monomers and crosslinker prior to the initiation of the polymerisation. Cationic and anionic derivatives of beta-cyclodextrin were used as macrocyclic compounds. Investigation of the electroosmotic properties indicated a template directed and enthalpy controlled self-assembly of the polyrotaxanes during the polymerisation of the continuous beds. This process was monomer-composition dependent and favored by the hydrophobicity of the polymeric skeleton. The morphology of the continuous beds was evaluated using high-resolution optical microscopy with CCD camera and atomic force microscopy. Reversed-phase capillary chromatography driven by electroosmosis, originating from the polyrotaxane structure, was performed using several test mixtures. Not primarily designed for the chiral chromatography the polyrotaxane derivatized continuous beds demonstrated enantioselective separation of D,L-metoprolol. The stability of the polyrotaxane derivatized continuous beds was tested. The beds demonstrated reproducible electroosmotic properties in the range from pH 4 to pH 9 (RSD=0.69%).     

A Novel and Efficient Synthesis of 5-(Hydroxymethyl) Thiazole: An Important Synthon for Preparing Biologically Active Compounds

A novel and efficient synthesis of 5-(hydroxymethyl) thiazole, an important synthon for the preparation of biologically active compounds, is described. The research also provides additional insight into the properties of halothiazoles.     

Iranian chemist’s efforts to provide various effective methods for the synthesis of xanthenes

Xanthenes and their derivatives as very important classes of organic compounds are key structural elements of many biologically active compounds. These materials are important heterocyclic nucleus of various dyes and drugs. Because of their wide range of pharmacological, industrial and synthetic applications, many methods for the preparation of xanthenes are reported in the literature. In recent years, among the other chemists, introduction of new methods for the preparation of these types of compounds has attracted the attention of Iranian chemists. The result of these efforts is the introduction of appropriate, effective and efficient methods. In this paper, we have a brief review on these methods and their main advantages and important applicabilities.     

Isolation,Separation, and Preconcentration of Biologically Active Compounds from Plant Matrices by Extraction Techniques

Development of efficient methods for isolation and separation of biologically active compounds remains an important challenge for researchers. Designing systems such as organomineral composite materials that allow extraction of a wide range of biologically active compounds, acting as broad-utility solid-phase extraction agents, remains an important and necessary task. Selective sorbents can be easily used for highly selective and reliable extraction of specific components present in complex matrices. Herein, state-of-the-art approaches for selective isolation, preconcentration, and separation of biologically active compounds from a range of matrices are discussed. Primary focus is given to novel extraction methods for some biologically active compounds including cyclic polyols, flavonoids, and oligosaccharides from plants. In addition, application of silica-, carbon-, and polymer-based solid-phase extraction adsorbents and membrane extraction for selective separation of these compounds is discussed. Potential separation process interactions are recommended; their understanding is of utmost importance for the creation of optimal conditions to extract biologically active compounds including those with estrogenic properties.     

Julia-Kocienski Olefination in the Synthesis of Trisubstituted Alkenes: Recent Progress

Julia-Kocienski olefination, a coupling reaction between a carbonyl component and a sulfone partner, has emerged as a powerful synthetic tool in the preparation of several organic compounds. A number of interesting examples involving particularly the preparation of trisubstituted alkenes along with important observations regarding the stereoselectivity of those reactions have been recently reported. This reviewing work covers the literature for the period 2016–2022 and describes in a comprehensive way the progress and developments of Julia-Kocienski olefination application in the synthesis of trisubstituted alkenes which serve as precursors of natural products and their analogs as well of pharmaceutically interesting/biologically important compounds. Moreover, key methodology results dealing with the investigation of the optimum conditions and stereoselectivities and new modifications and approaches are discussed.     

Phenacyl bromide: A versatile organic intermediate for the synthesis of heterocyclic compounds

Phenacyl bromides are used as a building blocks in synthetic organic chemistry, which serves as a key model for the development of various biologically important heterocyclic compounds and other industrially important scaffolds. This review covers recent synthetic advances in the preparation of heterocyclic compounds utilizing various phenacyl bromides. A wide range of five- and six-membered heterocyclic compounds as well as fused heterocyclic compounds were synthesized efficiently from the phenacyl bromide precursors through one-pot multicomponent reactions.     

Modern Methods of Pre-Treatment of Plant Material for the Extraction of Bioactive Compounds

In this review, recent advances in the methods of pre-treatment of plant material for the extraction of secondary metabolites with high biological activity are presented. The correct preparation of the material for extraction is as important as the selection of the extraction method. This step should prevent the degradation of bioactive compounds as well as the development of fungi and bacteria. Currently, the methods of preparation are expected to modify the particles of the plant material in such a way that will contribute to the release of bioactive compounds loosely bonded to cell wall polymers. This review presents a wide range of methods of preparing plant material, including drying, freeze-drying, convection drying, microwave vacuum drying, enzymatic processes, and fermentation. The influence of the particular methods on the structure of plant material particles, the level of preserved bioactive compounds, and the possibility of their release during the extraction were highlighted. The plant material pre-treatment techniques used were discussed with respect to the amount of compounds released during extraction as well their application in various industries interested in products with a high content of biologically active compounds, such as the pharmaceutical, cosmetics, and food industries.     

Simple,efficient, high yield syntheses of substituted and unsubstituted 5‐benzoylbarbituric acids,and their corresponding schiff base phenylhydrazones

Preparation procedures for biologically important benzoylbarbiturates are presented. Several procedures are optimized to cover the preparations of a wide variety of substituted 5‐benzoylbarbiturates. To further explore the biological importance of these compounds, multi‐ gram preparation procedures for nitrophenyl‐hydrazones of benzoylbarbiturates and their corresponding salts with organic amines are discussed. It is demonstrated that these compounds can exist in several tautomeric forms and that the equilibrium in solution can be changed by temperature as well as by the pH of the solution. X‐ray structural analysis performed on one of the nitrophenylhydrazones of benzoylbarbiturates fully agrees with the presented spectroscopic studies. AMI semi‐empirical studies show that the enol form is preferred in the gas phase of benzoylbarbiturates over the keto form, which was also confirmed by NMR spectroscopic studies with chloroform as the solvent. Furthermore, AMI computed structural and electronic properties of the dinitrophenylhydrazone of 4‐hydroxybenzoylbarbiturate compared favorably with the X‐ray determined structure.     

The intramolecular Baylis-Hillman reaction: easy preparation of versatile substrates, facile reactions, and synthetic applications

We have developed a general and highly efficient method for the preparation of diverse [small omega]-formyl-[small alpha],[small beta]-unsaturated carbonyl compounds and optimized the conditions for the intramolecular Baylis-Hillman reactions of these compounds to provide various biologically important polycyclic compounds.     

Evaluation of multidimensional capillary electrophoretic methodologies for determination of amino bisphosphonate pharmaceuticals

Alendronate and pamidronate are amino bisphosphonate analogues of pyrophosphate used for the treatment of a variety of bone diseases. Analysis of these compounds is problematic due to their polar ionic nature, lack of a suitable chromophore and chelation properties and current analytical approaches involve extensive sample preparation and derivatization procedures. The potential of multidimensional capillary electrophoretic methodological approaches, which eliminate sample preparation have been evaluated for the analysis of these compounds both in aqueous and urinary matrices. Capillary isotachophoresis (cITP) was employed as a pre-separation and on-line sample concentration step prior to analytical determination using either cITP or capillary zone electrophoresis (CZE) with conductivity detection. Single cITP, cITP-cITP and cITP-CZE approaches were partially validated with respect to repeatability, recovery and linearity of response for both compounds. The increases in sensitivity achievable through increasing injection volume from 30 to 300muL may render such strategies appropriate for determination of these agents at biologically relevant concentrations with minimal sample work-up.     

Synthesis and Applications of Carbohydrate-Based Organocatalysts

Organocatalysis is a very useful tool for the asymmetric synthesis of biologically or pharmacologically active compounds because it avoids the use of noxious metals, which are difficult to eliminate from the target products. Moreover, in many cases, the organocatalysed reactions can be performed in benign solvents and do not require anhydrous conditions. It is well-known that most of the above-mentioned reactions are promoted by a simple aminoacid, l-proline, or, to a lesser extent, by the more complex cinchona alkaloids. However, during the past three decades, other enantiopure natural compounds, the carbohydrates, have been employed as organocatalysts. In the present exhaustive review, the detailed preparation of all the sugar-based organocatalysts as well as their catalytic properties are described.     

Synthesis of β-amino-α-trifluoromethyl alcohols and their applications in organic synthesis

A comprehensive overview on methods applied for syntheses of β-amino-α-trifluoromethyl alcohols, including stereocontrolled variants, is presented. In addition, reported cases of the exploration of β-amino-α-trifluoromethyl alcohols for the preparation of trifluoromethylated peptidomimetics and other biologically active, fluorinated compounds are discussed. Attractive opportunities for their applications as organocatalysts are also presented.     

New syntheses of cycloalka[<Emphasis Type="Italic">b</Emphasis>]indoles

The review summarizes most recent synthetic approaches to compounds containing a cycloalka[b]- indole fragment as the main structural unit. Improved procedures for the preparation of cycloalka[b]indole heterocycles have been described, and their applications in the synthesis of natural and synthetic biologically active congeners have been considered.     

Homogeneous gels for capillary electrochromatography

Homogeneous gels represent a new type of (electro)chromatographic media possessing unique separation properties unmatched with any other chromatographic beds. It is important to emphasize that they principally differ from continuous beds, polymer rods (better known as monoliths), which are particulate separation media with pores permitting hydrodynamic flow through the columns. Monoliths, thus, are more similar to beds conventionally packed with beads, although the particles building up monolithic columns are usually smaller in size (few submicometers) and covalently linked together. Consequently, homogeneous gels deserve better the term "monoliths" having a non-particulate structure formed by crosslinked free polymer chains (according to a dictionary a monolith is a non-modularized column). The goals of this minireview are to clarify the position of homogeneous gels among the separation media (including polymer solutions), to explain and to exemplify their outstanding (electro)chromatographic properties. This review gives hopefully a complete list of references to homogeneous gels developed for capillary electrochromatography.     

Recent Progress in Application of Graphene Supported Metal Nanoparticles in C−C and C−X Coupling Reactions

The carbon‐carbon and carbon‐heteroatom bonds catalytic formation is among the most significant reactions in organic synthesis which extensively applied for synthesis of natural products, heterocycles, dendrimers, biologically active molecules and useful compounds. This review provides the latest advances in the preparation of graphene supported metal nanoparticles and their application in the catalytic formation of both carbon‐carbon (C−C) and carbon‐heteroatom (C−X) bonds including the Suzuki, Heck, Hiyama, Ullmann, Buchwald and Sonogashira coupling reactions. Numerous examples are given concerning the use of these catalysts in C−C and C−X coupling reactions along with the reliable and simple preparation methods of these catalysts, their characterization and catalytic properties and also the recycling possibilities.     

Straightforward and efficient synthesis of 3-benzyloxy-4-bromopicolinate ester and 3-benzyloxy-5-bromopicolinate ester, common building blocks for pharmaceuticals and agrochemicals

A practical and rapid preparation of 3-benzyloxy-4-bromo and 3-benzyloxy-5-bromopicolinate esters 10 and 16 was developed in four steps, respectively, in 38% and 31% overall yield. Then their viability as partners for cross-coupling reactions has been evaluated in Suzuki-Miyaura, Hartwig-Buchwald, and Sonogashira reactions to synthesize biologically relevant targets. The preparation of these two highly functionalizable pyridines 10 and 16 has been never described to date in the literature and could be used as common building block for the preparation of several biologically active compounds or agrochemical products.     

Polymethacrylate monolithic columns for capillary liquid chromatography

In recent years, continuous separation media have attracted considerable attention because of the advantages they offer over packed columns. This research resulted in two useful monolithic material types, the first based on modified silica gel and the second on organic polymers. This work attempts to review advances in the development, characterization, and applications of monolithic columns based on synthetic polymers in capillary chromatography, with the main focus on monolithic beds prepared from methacrylate-ester based monomers. The polymerization conditions used in the production of polymethacrylate monolithic capillary columns are surveyed, with attention being paid to the concentrations of monomers, porogen solvents, and polymerization initiators as the system variables used to control the porous and hydrodynamic properties of the monolithic media. The simplicity of their preparation as well as the possibilities of controlling of their porous properties and surface chemistries are the main benefits of the polymer monolithic capillary columns in comparison to capillary columns packed with particulate materials. The application areas considered in this review concern mainly separations in reversed-phase chromatography, ion-exchange chromatography, hydrophobic and hydrophilic interaction modes; enzyme immobilization and sample preparation in the capillary chromatography format are also addressed.     

Addition of organocerium reagents to morpholine amides: synthesis of important pheromone components of Achaea janata

Readily preparable morpholine amides hitch in good yields with organocerium reagents to produce ketones. Even in the presence of substrates and reagents with high steric hindrance, the organometallic compounds prepared from dry cerium(III) chloride and organomagnesium or organolithium compounds at -78 degrees C add cleanly to morpholine amides. The low cost of starting materials makes this new scheme of synthesis very interesting for the preparation of biologically important pheromones.     

Biodegradable starburst carbon chain polymer-protein and lysine dendrite conjugates: adjustment of immune properties,DNA bonding and delivery

In the past decade, the development of gene therapy technology has focused on the design of new nonviral carriers for gene delivery. Proteins modified with polyethyleneimine^[1] or polylysine^[2] as well as dendrites^[3] have shown to be perspective carriers for DNA targeted delivery. The usage of protein conjugates as carriers of biologically active compounds will depend on the adjustment of their immune properties. To investigate this we have prepared starburst carbon chain polymer/protein conjugates containing low molecular weight biologically active compounds, salsolinol and bradykinin, in the polymer moieties and studied their immune properties. We have shown that chemical structure of the polymer moiety determines the conjugate biodegradation as well as their immune properties. The starburst poly(N-vinylimidazole) transferring poly(N-vinylimidazole) and polylysine 3G lysine dendrite conjugates have been prepared. The study of their ability to bind DNA and to guarantee its targeted delivery have shown that they are perspective DNA carriers.     

Synthesis of All Eight L‐Glycopyranosyl Donors Using CH Activation

The synthesis of all eight rare, but biologically important L ‐hexoses as the according thioglycosyl donors was achieved through a procedure involving the C? H activation of their corresponding 6‐deoxy‐L ‐hexoses. The key steps of the procedure were the silylation of the OH group at C4 followed by an intramolecular C? H activation of the methyl group in γ‐position; both steps were catalyzed by iridium. The following Fleming–Tamao oxidation and acetylation gave the suitably protected L ‐hexoses. This is the first general method for the preparation of all eight L ‐hexoses as their thioglycosyl donors ready for glycosylation and the first example of an iridium‐catalyzed C(sp³)? H activation on sulfide‐containing compounds.