Micellar electrokinetic capillary chromatographic separation and fluorescent detection of amino acids derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole

Another method has been developed for the separation of amino acids (1 min derivatization plus 22 min separation) by micellar electrokinetic capillary chromatography (MECC) with laser-induced fluorescence detection. Interestingly enough, such work has never been performed on essential amino acids derivatized by 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F). Fifteen L-amino acid standards were labelled with NBD-F at 60 degrees C for 1 min, and separated in a buffer system containing 20 mM borate, 25 mM sodium cholate, 10 mM Brij 35 and 2.5% methanol. Methanol was employed to expand the MECC migration time window; whereas Brij 35 was used to improve the fluorescence intensity of amino acid derivatives. This method also indicates that bile salt is effective for MECC separation of ionic analytes. Surprising though, improvements in resolution, sensitivity and speed for amino acids analysis are obtained in this work, which are not initially apparent in just employing another derivatizing reagent. Under optimal conditions, 15 amino acids were separated in a short 22 min analysis time, the shortest ever reported, and detection limits of nanomolar concentration and attomole mass were obtained. Furthermore, RSDs of migration time and peak height are better than 1% and 1.8%, respectively, again the smallest ever reported in the literature.     

Determination of neurotransmitter amino acids in mouse central nervous system by CE–LIF

An MEKC method with LIF detection has been developed for the determination of seven neurotransmitter amino acids (NAAs) using 1,3,5,7‐tetramethyl‐8‐(N‐hydroxysuccinimidyl butyric ester)difluoroboradiaza‐S‐indacene as the labeling reagent. After derivatization at room temperature for 30 min, the seven target NAAs including glycine, alanine, γ‐aminobutyric acid, taurine, glutamine, glutamic acid, and aspartic acid were separated in running buffer, which consisted of 70 mM pH 4.00 H₃PO₄/Na₃PO₄ buffer, 5.5 mM cetyltrimethyl ammonium bromide and 20% v/v acetonitrile within 17 min. The LODs were 2 ～ 14 × 10^?10 M without interference from other coexisting amino acids. The proposed method has been applied to the analysis of NAAs in the central nervous systems of healthy mice and those with Alzheimer's disease with recoveries of 92–104%.     

A simple and sensitive CE method for the simultaneous determination of catecholamines in urine with in-column optical fiber light-emitting diode-induced fluorescence detection

A simple and sensitive method has been developed for simultaneous analysis of three catecholamines: dopamine (DA), epinephrine (EP) and norepinephrine (NE) in urine by capillary electrophoresis (CE) coupled with in-column fiber-optic light-emitting diode-induced fluorescence detection (ICFO-LED-IFD). Fluorescein isothiocyanate was used as the fluorescence tagged reagent for derivatization of DA, EP and NE. The CE conditions for separation of these catecholamines were systematically investigated. It was found that catecholamines could be more effectively separated by adding β-cyclodextin (β-CD) and acetonitrile (ACN) to a background electrolyte (BGE) of sodium borate. The migration times are 10.61, 10.83 and 11.14 min for DA, EP and NE, respectively and the catecholamines are completely separated within 11.5 min under the optimal condition of a BGE containing 10% v/v ACN, 20 mM β-CD and 20 mM sodium borate (pH 9.5), and an applied voltage of 13 kV. The relative standard deviations of migration time and peak area for these catecholamines are less than 0.16 and 2.0%, respectively. The limit of quantifications (LOQs) for DA, EP and NE are 3.5, 1.0 and 3.1 nM whereas the limit of detections (LODs) for DA, EP and NE are 1.0, 0.3 and 0.9 nM, respectively. Our proposed CE method provides low LOQ and LOD values. This CE-ICFO-LED-IFD methodology has been successfully applied to analyze catecholamines in human urine samples with good accuracy and satisfactory recovery.     

N-hydroxysuccinimidyl-fluorescein-O-acetate for precolumn fluorescence derivatization of amino acids and oligopeptides in liquid chromatography

A new fluorescent derivatizing reagent, N-hydroxysuccinimidyl-fluorescein-O-acetate, is used for the high-performance liquid chromatographic analysis of amino acids and oligopeptides. This reagent has the advantages of high-detection sensitivity in the visible region, specifically with amino groups, mild derivatization conditions, and little interference induced. The fluorescence properties of the reagent and its derivatives with amino acids and oligopeptides are studied. The conditions of the derivatization are investigated in detail. In the mobile phase of methanol-water (42:58, v/v) containing a 10 mM pH 5.0 citric acid-Na2HPO4 buffer, six amino acids and oligopeptides are separated in 20 min with fluorescence detection at excitation and emission wavelengths of 492 and 513 nm, respectively, with the detection limits for injected standards ranging from 0.64 to 12 fmol.     

Analysis of free amino acids in fermented shrimp waste by high-performance liquid chromatography

This work presents an HPLC method for the quantification of free amino acids in lyophilized protein fraction from shrimp waste hydrolysate which is obtained by acid lactic fermentation and analyzed using pre-column derivatization with 9-fluorenylmethyl-chloroformate. The amino acids were separated in a Hypersil ODS 5 microm column (250 mm x 4.6 mm) at 38 degrees C. The mobile phase was a mixture of phase A: 30 mM ammonium phosphate (pH 6.5) in 15:85 (v/v) methanol/water; phase B: 15:85 (v/v) methanol/water; and phase C: 90:10 (v/v) acetonitrile/water, with flow rate 1.2 ml/min. Fluorescence detection was used at an excitation wavelength of 270 nm and an emission wavelength of 316 nm. Method precisions for the different amino acids were between 4.4 and 7.1% (relative standard deviation, RSD); detection limits were between 23 and 72 ng/ml; and the recoveries were between 89.0 and 95.0%. The amino acid present at the highest concentration was tyrosine.     

Continuous flow derivatization system coupled to capillary electrophoresis for the determination of amino acids

A derivatization system coupled to capillary electrophoresis for the determination of amino acids using 1,2-naphthoquinone-4-sulfonate as a labeling agent is described. In this system, amino acids are derivatized on-line in a three-channel flow manifold for sample, reagent and buffer solutions. The reaction takes place in a PTFE coil heated at 80 degrees C. The resulting solution, which contains the amino acid derivatives, is introduced into the electrophoretic system by means of an appropriate interface. Subsequently, amino acid derivatives are separated at 25 kV using a 40 mM sodium tetraborate aqueous solution with 30% (v/v) isopropanol solution as a running buffer. The electropherograms are monitored spectrophotometrically at 230 nm. The method has been applied to the determination of amino acids in feed samples and pharmaceutical preparations. A good concordance of the predicted values with those given by a standard amino acid analyzer is shown.     

A fully automated amino acid analyzer using NBD-F as a fluorescent derivatization reagent

A fully automated amino acid analyzer using NBD-F (4- fluoro-7-nitro-2,1,3-benzoxadiazole) as a fluorescent derivatization reagent was developed. The whole analytical process was fully automated from derivatization, injection to HPLC separation and quantitation. The derivatization reaction conditions were re-evaluated and optimized. Amino acids were derivatized by NBD-F for 40 min at room temperature in the borate buffer (pH 9.5). The derivatives were separated within 100 min and fluorometrically detected at 540 nm with excitation at 470 nm. The detection limits for amino acids were in the range of 2.8-20 fmol. The calibration curves were linear over the range of 20 fmol to 20 pmol on column with the correlation coefficients of 0.999. The coefficients of variation were less than 5% at 3 pmol injection for all amino acids. Amino acids in rat plasma were determined by the proposed HPLC method.     

Analytical potential of 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein for the determination of amino compounds by capillary electrophoresis with laser-induced fluorescence detection

The analytical potential of a fluorescein analogue, 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein (SAMF), for the first time synthesized in our laboratory, as a labeling reagent for the labeling and determination of amino compounds by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was investigated. Biogenic monoamines and amino acids were chosen as model analytes to evaluate the analytical possibilities of this approach. The derivatization conditions and separation parameters for the biogenic amines were optimized in detail. The derivatization was performed at 30 degrees C for 6 min in boric acid buffer (pH 8.0). The derivatives were baseline-separated in 15 min with 25 mM boric acid running buffer (pH 9.0), containing 24 mM SDS and 12.5% v/v acetonitrile. The concentration detection limit for biogenic amines reaches 8 x 10(-11) mol.L(-1) (signal-to-noise ratio = 3). The application of CE in the analysis of the SAMF-derivatized amino acids was also exploited. The optimal running buffer for amino acids suggested that weak acidic background electrolyte offered better separation than the basic one. The proposed method was applied to the determination of biogenic amines in three different beer samples with satisfying recoveries varying from 92.8% to 104.8%. Finally, comparison of several fluorescein-based probes for amino compounds was discussed. With good labeling reaction, excellent photostability, pH-independent fluorescence (pH 4-9), and the resultant widely suited running buffer pH, SAMF has a great prospect in the determination of amino compounds in CE.     

Electrophoretic separation with 2-mm inner diameter fused-silica microcolumn packed with quartz microncrystals and its application

The feasibility of a microcolumn electrophoresis technique was investigated with a 100 mm length, 2 mm I.D. fused-silica microcolumn packed with uniform quartz microncrystals prepared by hydrothermal synthesis. To evaluate the separation technique, tryptophan, phenylalanine and tyrosine were primarily separated by the microcolumn electrophoresis and detected at 216 nm without derivatization by an ordinary spectrophotometer. The separation conditions of the amino acids were optimized. With 1.5 mmol/L disodium phosphate buffer solution (pH 11.5) containing 25% (v/v) methanol and 10% (v/v) acetonitrile, the three amino acids were separated and the separation efficiency of tryptophan was 4.5 × 10⁴ plates/m. The limits of detection were 0.035, 0.22 and 0.20 μmol/L, respectively. The sample capacity of the electrophoretic microcolumn achieved 35 μL. The proposed method was used to determine these amino acids in compound amino acid injection samples without derivatization. For the simplicity and portability of the microcolumn electrophoresis, it is studied as one of the high-performance separation techniques for an in situ and real-time electrokinetic flow analysis system. For its high detection sensitivity and large sample capacity, it can be developed for preparative electrophoresis.     

Method for on-line derivatization and separation of aspartic acid enantiomer in pharmaceuticals application by the coupling of flow injection with micellar electrokinetic chromatography

A novel, easy and accurate capillary electrophoresis (CE) coupled with flow injection (FI) method for the separation and determination of aspartic acid (Asp) enantiomers by on-line derivatization had been developed, and it had been applied to the real sample for the first time. The derivatization reagents were o-phthalaldehyde (OPA) and mercaptoethanol (ME), which were obtained easily, the chiral selector was beta-cyclodextrin (beta-CD), the micellar chemical was sodium dodecyl sulfate (SDS), and the modifier was methanol. By on-line derivatization, aspartic acid enantiomers were automatically and reproducibly converted to the ultraviolet (UV)-absorbing diastereoisomer derivates, which were separated by micellar electrokinetic chromatography (MEKC). According to the factors affecting the separation and sensitivity of aspartic acid enantiomer and other amino acids in the real sample, the pH value and concentration of the buffer, the concentration of beta-CD and SDS, the volume percentage of the methanol (v/v) in the buffer, the applied voltage and the conversion time were selected as the investigating variates. Under the investigated separation conditions, D-aspartic acid (D-Asp), L-aspartic acid (L-Asp) and other four amino acids achieved the baseline separation in not only the standard mixture of amino acids but also the real sample (Compound Amino Acid Injection (6AA)). The repeatability (defined as relative standard deviation (RSD), n = 5) was 4.0% and 4.0% with peak area evaluation, and 4.2% and 3.7% with peak height evaluation for D-Asp and L-Asp in the real sample. Recovery at added standard levels of 1.0, 3.0 and 6.0 mM was 92%, 104% and 109%, respectively.     

Determination of amino acids and catecholamines derivatized with 3-(4-chlorobenzoyl)-2-quinolinecarboxaldehyde in PC12 and HEK293 cells by capillary electrophoresis with laser-induced fluorescence detection

An effective micellar electrokinetic capillary chromatography with laser-induced fluorescence detection (MEKC-LIF) method has been proposed for the separation and the determination of 16 amino acids and two catecholamines using a new fluorogenic reagent, 3-(4-chlorobenzoyl)-2-quinolinecarboxaldehyde (Cl-BQCA), as the derivatizing reagent. The highest derivatization efficiency was achieved in pH 8.0 borate buffer at 50 °C for 50 min. The optimal separation of Cl-BQCA-labeled amines was obtained with a running buffer (pH 9.15) containing 120 mM boric acid, 38.5 mM sodium dodecyl sulfate, and 17% acetonitrile. The detection limit (S/N = 3) was found to be as low as 1.4 nM. The present method has been successfully used to detect amino acids and catecholamines in HEK293 and PC12 cell samples. This study explores the potential of MEKC-LIF with Cl-BQCA labeling as a tool for monitoring amino acids and catecholamines during the complex physiological and behavioral processes in various matrices.     

Amino acid analysis by micellar electrokinetic chromatography with laser-induced fluorescence detection: application to nanolitre-volume biological samples from Arabidopsis thaliana and Myzus persicae

Amino acids were derivatised with 4-fluoro-7-nitrobenzo-2,1,3-oxadiazol (NBD-F), separated by micellar electrokinetic chromatography (MEKC), and detected by argon-ion (488 nm) laser-induced fluorescence. The optimised MEKC background electrolyte conditions were: 40 mM sodium cholate, 5 mM beta-cyclodextrin in 20 mM aqueous borate buffer, pH 9.1, with 7% v/v acetonitrile. Using these conditions, 19 amino acids were separated within 17 min. The limits of detection were in the range of 7.6-42.2 pmol/mL and limits of quantitation from 0.05-0.14 nmol/mL. The method was systematically validated for injection volume error, migration time variation, calibration linearity, accuracy, precision, and recovery. Nanolitre volume samples of phloem sap of individual sieve element cells from the plant Arabidopsis thaliana and honeydew from the aphid Myzus persicae were directly analysed with this method. Quantitative amino acid concentrations in these two biological matrices were profiled for the first time. This method is particularly important because it allows the complete profile of the amino acids obtained from individual phloem elements, allowing cell to cell and plant to plant variation to be quantified, which to date has not been possible with Arabidopsis thaliana.     

Simultaneous analysis of free amino acids and biogenic amines in honey and wine samples using in loop orthophthalaldeyde derivatization procedure

This work presents a RP-HPLC method for the simultaneous quantification of free amino acids and biogenic amines in liquid food matrices and the results of the application to honey and wine samples obtained from different production processes and geographic origins. The developed methodology is based on a pre-column derivatization with o-phthaldialdehyde carried out in the sample injection loop. The compounds were separated in a Nova-Pack RP-C(18) column (150 mm x 3.9 mm, 4 microm) at 35 degrees C. The mobile phase used was a mixture of phase A: 10 mM sodium phosphate buffer (pH 7.3), methanol and tetrahydrofuran (91:8:1); and phase B: methanol and phosphate buffer (80:20), with a flow rate of 1.0 ml/min. Fluorescence detection was used at an excitation wavelength of 335 nm and an emission wavelength of 440 nm. The separation and quantification of 19 amino acids and 6 amines was carried out in a single run as their OPA/MCE derivatives elute within 80 min, ensuring a reproducible quantification. The method showed to be adequate for the purpose, with an average RSD of 2% for the different amino acids; detection limits varying between 0.71 mg/l (Asn) and 8.26 mg/l (Lys) and recovery rates between 63.0% (Cad) and 98.0% (Asp). The amino acids present at the highest concentration in honey and wine samples were phenylalanine and arginine, respectively. Only residual levels of biogenic amines were detected in the analysed samples.     

Phanquinone as a suitable derivatization reagent in micellar electrokinetic chromatography and HPLC analysis of amino acids

Phanquinone (chemically: 4,7-phenanthroline-5,6-dione) was applied as an original precolumn derivatization reagent for amino acids followed by separation using MEKC with UV detection (240 nm). The derivatization reaction was carried out at 68 degrees C in the presence of aqueous phosphate buffer (pH 8.0) and it was found to be complete after 30 min. Twelve derivatized standard amino acids were separated in about 22 min under MEKC conditions using sodium cholate (250 mM) as the surfactant in phosphate buffer (20 mM, pH 9.0). The developed method was validated for the analysis of D,L-phosphoserine (D,L-p-Ser) and L-glutamine (L-Gln); good linearity (r > 0.999) was achieved in the calibration range of 0.25-2.5 micromol/mL. The sensitivity of the MEKC method (LOD 0.1 micromol/mL; LOQ 0.25 micromol/mL, RSD% <5.0%, n = 3) was found to be adequate for quantitation of amino acids in pharmaceuticals. Quantitative applications of the validated MEKC method were carried out by the analysis of commercially available oral polyaminoacid formulations (tablets and extemporaneous solutions) containing L-Gln and D,L-p-Ser; the obtained results were found to be in agreement with those from a validated reference RP-HPLC method.     

Fast Analysis of Free Amino Acids in Tobacco by HPLC with Fluorescence Detection and Automated Derivatization

A fast, simple, and sensitive HPLC method for the determination of free amino acids in tobacco was described. A fully automated sample processor performed precolumn derivatization of both primary and secondary amino acids with o‐phthalaldehyde/3‐mercaptopropionic acid and 9‐fluorenylmethyl chloroformate (FMOC‐Cl), respectively. All reactions were fully automated by means of an injector programme and accomplished in 10 min. Sample preparation consisted of a single step of extraction with 0.1 mol/L HCl at ambient temperature (assisted by sonication) in 30 min, followed by filtration of an aliquot and derivatization. By optimization of sample preparation and HPLC conditions, separation of 20 amino acids in 30 min was achieved. Detection limits ranged from 0.50 to 1.40 μg/g; coefficients of variation ranged from 1.8% to 3.9%; recoveries ranged from 84.6% to 108.5%. The method was applied to the analysis of amino acids contents of tobacco leaves in different varieties and flue‐curing period.     

Nonaqueous capillary electrophoresis with laser-induced fluorescence detection: a case study of comparison with aqueous media

A novel method based on separation by nonaqueous capillary electrophoresis (NACE) combined with laser-induced fluorescence (LIF) detection was developed and compared with classic aqueous modes of electrophoresis in terms of resolution of solutes of interest and sensitivity of the fluorescence detection. Catecholamines derivatized with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) were chosen as test analytes for their subtle fluorescence properties. In aqueous systems, capillary zone electrophoresis (CZE) was not suitable for the analysis of test analytes due to complete fluorescence quenching of NBD-labeled catecholamines in neat aqueous buffer. The addition of micelles or microemulsion droplets into aqueous running buffer can dramatically improve the fluorescence response, and the enhancement seems to be comparable for micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC). As another alternative, NACE separation was advantageous when performing the analysis under the optimum separation condition of 20 mM sodium tetraborate, 20 mM sodium dodecyl sulfate (SDS), 0.1% (v/v) glacial acetic acid, 20% (v/v) acetonitrile (ACN) in methanol medium after derivatization in ACN/dimethyl sulfoxide (DMSO) (3:2, v/v) mixed aprotic solvents containing 20 mM ammonium acetate. Compared with derivatization and separation in aqueous media, NACE-LIF procedure was proved to be superior, providing high sensitivity and short migration time. Under respective optimum conditions, the NACE procedure offered the best fluorescence response with 5-24 folds enhancement for catecholamines compared to aqueous procedures. In addition, the mechanisms of derivatization and separation in nonaqueous media were elucidated in detail.     

Continuous on-line derivatization and selective separation of D-aspartic acid by a capillary electrophoresis system with a continuous sample introduction interface

A rapid and selective method is described for the separation of D-aspartic acid (D-Asp) using a continuous on-line derivatization system coupled to capillary electrophoresis (CE). D-Asp was derivatized using o-phthaldialdehyde/N-acetyl-L-cysteine (OPA/NAC). By on-line derivatization, amino acid enantiomers were automatically and reproducibly converted to the UV-absorbing diastereomer derivatives which were separated by capillary zone electrophoresis (CZE) in the presence of 10 mmol/L beta-cyclodextrin (beta-CD). Under the investigated separation conditions, D-Asp is resolved from L-aspartic acid (L-Asp) and other amino acids in a standard mixture of amino acids. The separation could be achieved within 4 min and the sample throughput rate can reach up to 16 h(-1). The repeatability (defined as relative standard deviation, RSD) was 3.21%, 3.58% with peak area evaluation and 3.72%, 4.03% with peak height evaluation for L-Asp and D-Asp.     

Simultaneous determination of diethylene glycol and propylene glycol in pharmaceutical products by HPLC after precolumn derivatization with p-toluenesulfonyl isocyanate

A simple and reliable HPLC method was developed for the simultaneous quantitative analysis of diethylene glycol (DEG) and propylene glycol (PG) in pharmaceutical products by precolumn derivatization. The derivatization reagent p-toluenesulfonyl isocyanate (TSIC, 10 microL, 20% in ACN v/v) was added to 100 microL of the sample, and then 10 muL of water was added. The resulting derivatives were separated using a C(18)analytical column and a mobile phase composed of 0.01 M KH(2)PO(4)buffer (adjusted to pH 2.5 with phosphoric acid) and ACN (47:53 v/v) at 1 mL/min and 25 degrees C. For detection, UV light at 227 nm was used. The derivatization conditions including reaction time, temperature, and concentration of TSIC were optimized. The calibration curves were linear from 0.062 to 18.6 microg/mL (r(2)= 0.9999) and from 0.071 to 21.3 microg/mL (r(2) = 0.9999) for DEG and PG, respectively. The RSD values of intra- and interday assays were all below 4% for DEG and PG. The proposed method was then successfully applied to analyze two Armillarisin A injection samples and two spiked syrup samples.     

Design and synthesis of a hydrophilic fluorescent derivatization reagent for carboxylic acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH2), and its application to capillary electrophoresis with laser-induced fluorescence detection

A hydrophilic fluorescent derivatization reagent for fatty acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH(2)), was designed and synthesized. NBD-PZ-NH(2) possesses not only a fluorophore and a reacting group but also a positive charge group and, thus, was hydrophilic and suitable for application to capillary electrophoresis. NBD-PZ-NH(2) reacted with fatty acids in the presence of triphenylphosphine (TPP) and 2,2'-dipyridyl disulfide (DPDS) at room temperature within 10 min. The derivatives were strongly fluoresced and were positively charged at pH below 3. The derivatives of C4-C20 fatty acids were separated within 10 min in 50% acetonitrile in water containing 30 mM ammonium acetate and 1.0 M acetic acid by capillary electrophoresis with laser-induced fluorescence (CE-LIF) detection. The detection limits attained were 6.5 nM (signal-to-noise ratio of 3). It is proposed that NBD-PZ-NH(2) is a prominent derivatization reagent for fatty acids which is suitable for CE-LIF application.     

Quantification of structurally related aliphatic amino alcohols in l‐valinol by hydrophilic interaction liquid chromatography separation combined with postcolumn derivatization and fluorescence detection

The amino alcohols in l‐ valinol were effectively separated and quantified using hydrophilic interaction chromatography with fluorescence detection. The influence of the mobile phase (salt type, buffer concentration, and pH) on retention was studied. A column TSKgel amide and mobile phase consisting of 10 mM acetate buffer pH 4.0 and acetonitrile (20:80, v/v) provided well‐ separated symmetric peaks of analytes. Fluorescence detection was performed using postcolumn derivatization with o‐phtaldialdehyde/2‐mercaptoethanol at an excitation and emission wavelength of 345 and 450 nm, respectively. Simple sample pretreatment and very high sensitivity represent the main advantages of the developed method. After validation, the method was successfully applied to the analysis of commercial samples of l‐ valinol.