On laminar flow through a uniformly porous pipe

Numerous investigations ([1] and [4–9]) have been made of laminar flow in a uniformly porous circular pipe with constant suction or injection applied at the wall. The object of this paper is to give a complete analysis of the numerical and theoretical solutions of this problem. It is shown that two solutions exist for all values of injection as well as the dual solutions for suction which had been noted by previous investigators. Analytical solutions are derived for large suction and injection; for large suction a viscous layer occurs at the wall while for large injection one solution has a viscous layer at the centre of the channel and the other has no viscous layer anywhere. Approximate analytic solutions are also given for small values of suction and injection.

Nomenclature

General r distance measured radially - z distance measured along axis of pipe - u velocity component in direction of z increasing - v velocity component in direction of r increasing - p pressure - density - coefficient of kinematic viscosity - a radius of pipe - V velocity of suction at the wall - r ²/a ² - R wall or suction Reynolds number, Va/ - f() similarity function defined in (6) - u ₀() eigensolution - U(0) a velocity at z=0 - K an arbitrary constant - B _K Bernoulli numbers Particular Section 5 perturbation parameter, –2/R - ² a constant, –K - x / - g(x) f()/ Section 6 perturbation parameter, –R/2 - ² a constant, –K - g() f() - g _c ()=g() near centre of pipe - * point where g()=0 Section 7 2/R - ² K - t (1–)/ - w(t, ) [1–f(t)]/ - ₀, ₁ constants - g() f()– ₀ - ₀/ - ₀ a constant - * point where f()=0     

Some problems concerning nonstationary currents in dense plasma systems confined by walls

Nonstationary currents are examined in a dense magnetized plasma with 1, in which energy release and heat loss by thermal conduction and radiation are possible. Solutions are found in two limiting cases: ¦f¦ ¦ div (T)¦ and ¦f¦ ¦ div(T)¦ (f is the radiation intensity, is the coefficient of heat conduction, and T is the temperature). In the first case a solution was obtained of some problems of the cooling and heating of a plasma illustrated in part by the evolution in time of the temperature profile in the boundary layer. In the second case an isomorphic solution was found for an arbitrary dependence of the coefficient of heat conduction on the temperature, pressure, and magnetic field.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 3–8, January–February, 1972.The author is grateful to G. I. Budker for formulating the problem.     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

On surface waves in generalized thermoelasticity

Knowles' representation theorem for harmonically time-dependent free surface waves on a homogeneous, isotropic elastic half-space is extended to include harmonically time-dependent free processes for thermoelastic surface waves in generalized thermoelasticity of Lord and Shulman and of Green and Lindsay.r , , r , , .This work was done when author was unemployed.     

Filament stretching equation in Lagrangian coordinates

The general integral of the very simple equation ^21/n/() was found to describe the cross sectional area of filaments of isothermal power law fluids while in transient stretching where is time and is the initial location of fluid molecules at time = 0 given as the distance from a reference point fixed in space. Any such stretching transient given as a solution of the above equation is physically realizable subject to the restrictions > 0 and/ < 0.     

Laser velocimetry measurements in a horizontal gas-solid pipe flow

This paper presents laser measurements of particle velocities in a horizontal turbulent two-phase pipe flow. A phase Doppler particle analyzer, (PDPA), was used to obtain particle size, velocity, and rms values of velocity fluctuations. The particulate phase consisted of glass spheres 50 m in diameter with the volume fraction of the suspension in the range _p=10^-4 to _p=10^-3. The results show that the turbulence increases with particle loading.List of symbols a particle diameter - C _va velocity diameter cross-correlation - d pipe diameter - Fr ² Froude number - g gravitational constant - p(a) Probability density of the particle diameter - Re pipe Reynolds number based on the friction velocity - T characteristic time scale of the energy containing eddies - T _L integral scale of the turbulence sampled along the particle path - u, U, u characteristic fluid velocities: fluctuating, mean and friction - v characteristic velocity of the paricle fluctuations - f expected value of any random variable f - f¦g expected value of f given a value of the random variable g - _p particle volume fraction - _p particle response time - absolute fluid viscosity - v kinematic fluid viscosity - _p, _f densities, particle and fluid - _a ² particle diameter variance - _va ² velocity variance due to the particle diameter variance - _vT ² total particle velocity variance - _vt ² particle velocity variance due to the response to the turbulent field     

Normal forms for random diffeomorphisms

Given a dynamical system (,, ,) and a random diffeomorphism (): ^{d d} with fixed point at x=0. The normal form problem is to construct a smooth near-identity nonlinear random coordinate transformation h() to make the random diffeomorphism ()=h()^–1() h() as simple as possible, preferably linear. The linearization D(, 0)=:A() generates a matrix cocycle for which the multiplicative ergodic theorem holds, providing us with stochastic analogues of eigenvalues (Lyapunov exponents) and eigenspaces. Now the development runs pretty much parallel to the deterministic one, the difference being that the appearance of turns all problems into infinite-dimensional ones. In particular, the range of the homological operator is in general not closed, making the conceptof-normal form necessary. The stochastic versions of resonance and averaging are developed. The case of simple Lyapunov spectrum is treated in detail.     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

Free convection heat transfer from an isothermal plate with arbitrary inclination

This paper presents a new formulation for the laminar free convection from an arbitrarily inclined isothermal plate to fluids of any Prandtl number between 0.001 and infinity. A novel inclination parameter is proposed such that all cases of the horizontal, inclined and vertical plates can be described by a single set of transformed equations. Moreover, the self-similar equations for the limiting cases of the horizontal and vertical plates are recovered from the transformed equations by setting=0 and=1, respectively. Heated upward-facing plates with positive and negative inclination angles are investigated. A very accurate correlation equation of the local Nusselt number is developed for arbitrary inclination angle and for 0.001 Pr .

---

Wärmeübertragung bei freier Konvektion an einer isothermen Platte mit beliebiger Neigung

Zusammenfasssung Diese Untersuchung stellt eine neue Formulierung der laminaren freien Konvektion von Flüssigkeiten mit einer Prandtl-Zahl zwischen 0,001 und unendlich an einer beliebig schräggestellten isothermen Platte dar. Ein neuer Neigungsparameter wird eingeführt, so daß alle Fälle der horizontalen, geneigten oder vertikalen Platte von einem einzigen Satz transformierter Gleichungen beschrieben werden können. Die unabhängigen Gleichungen für die beiden Fälle der horizontalen and vertikalen Platte wurden für=0 und=1 aus den transformierten Gleichungen wieder abgeleitet. Es wurden erwärmte aufwärtsgerichtete Platten mit positiven und negativen Neigungswinkeln untersucht. Eine sehr genaue Gleichung wurde für die lokale Nusselt-Zahl bei beliebigen Neigungswinkeln und für 0,001 Pr entwickelt.

---

Nomenclature C _p specific heat - f reduced stream function - g gravitational acceleration - Gr local Grashof number,g(T _w –T _w ) x³/v² - h local heat transfer coefficient - k thermal conductivity - n constant exponent - Nu local Nusselt number,hx/k - p pressure - Pr Prandtl number, v/ - Ra local Rayleigh number,g(T _w –T )J x³/v - T fluid temperature - T _w wall temperature - T temperature of ambient fluid - u velocity component in x-direction - v velocity component in y-direction - x coordinate parallel to the plate - y coordinate normal to the plate Greek symbols thermal diffusivity - thermal expansion coefficient - (Ra¦sin¦)^1/4/( Ra cos()^1/5 - pseudo-similarity variable, (y/) - dimensionless temperature, (T–T )/(T _w–T ) - ( Ra cos)^1/5+(Rasin)^1/4 - v kinematic viscosity - 1/[1 +(Ra cos)^1/5/( Ra¦sin)^1/4] - density of fluid - Pr/(1+Pr) - _w wall shear stress - angle of plate inclination measured from the horizontal - stream function - dimensionless dynamic pressure     

Time studies of ionization processes

Summary Measurements of the temporal growth of ionization between parallel plane electrodes in hydrogen have been made. The results show that for low values ( 40 V/cm mm Hg) of the ratio of electric fieldE to gas pressurep the growth times can be short ( 1s for over-voltages V 1 %) while at values ofE/p 300 V/cm mm Hg the times are of the order of milli seconds withV 5%. Comparison of the experimental data with Davidson's mathematical analysis of current growth based upon the action of primary and secondary ionization processes shows that the relative significance of the possible secondary processes changes asE/p is altered. For the low values ofE/p, the predominant secondary process contributing to the growth was found to be photoelectric emission from the cathode, but with increasing values ofE/p the role of positive ion interaction with the cathode becomes increasingly important. No single secondary process was exclusively operating in any of the conditions examined.     

Die Torsionsspannungen in Wellen mit tiefen Längsnuten

Übersicht MitF(x, y) als Spannungsfunktion einer Welle ohne Nut und(, y) als Potentialfunktion des Quelle-Senke-Systems erhält man Spannungsfunktionen(, y) =F(x, y) –(, y) für Wellen mit tiefen Längsnuten. Es wird gezeigt, daß sich damit die Schubspannungen in den Läufern von Schraubenverdichtern ermitteln lassen.

---

Shearing stresses in shafts with deep longitudinal grooves

Summary The stress functions(, y) of shafts with deep longitudinal grooves may be represented by(, y) =F(x, y) –(, y) whereF(x, y) is the stress function of a cylindrical shaft without grooves and(, y) denotes the potential function of the source-sink system. It is shown that the shearing stresses in rotors of screw-compressors may be obtained in this way.

     

The effect of background particulates on the delayed transition of a heated 9:1 ellipsoid

An experimental study was done to quantify the effects of a variety of background particulates on the delayed laminar-turbulent transition of a thermally stabilized boundary layer in water. A Laser-Doppler Velocimeter system was used to measure the location of boundary layer transition on a 50 mm diameter, 9:1 fineness ratio ellipsoid. The ellipsoid had a 0.15 m RMS surface finish. Boundary layer transition locations were determined for length Reynolds numbers ranging from 3.0 × 10⁶ to 7.5 × 106. The ellipsoid was tested in three different heating conditions in water seeded with particles of four distinct size ranges. For each level of boundary layer heating, measurements of transition were made for clean water and subsequently, water seeded with 12.5 m, 38.9 m, 85.5 m and 123.2 m particles, alternately. The three surface heating conditions tested were no heating, T = 10°C and T = 15°C where T is the difference between the inlet model heating water temperature, T _i, and free stream water temperature, T . The effects of particle concentration were studied for 85.5 m and 123.2 m particulates.The results of the study can be summarized as follows. The 12.5 m and 38.9 m particles has no measurable effect on transition for any of the test conditions. However, transition was significantly affected by the 85.5 m and 123.2 m particles. Above a length Reynolds number of 4 × 10⁶ the boundary layer transition location moved forward on the body due to the effect of the 85.5 m particles for all heating conditions. The largest percentage changes in transition location from clean water, were observed for 85.5 m particles seeded water.Transition measurements made with varied concentrations of background particulates indicated that the effect of the 85.5 m particles on the transition of the model reached a plateau between 2.65 particulates/ml concentration and 4.2 particles/ml. Measurements made with 123.3 m particles at concentrations up to 0.3 part/ml indicated no similar plateau.     

Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions

In this work we consider transport in ordered and disordered porous media using singlephase flow in rigid porous mediaas an example. We defineorder anddisorder in terms of geometrical integrals that arise naturally in the method of volume averaging, and we show that dependent variables for ordered media must generally be defined in terms of thecellular average. The cellular average can be constructed by means of a weighting function, thus transport processes in both ordered and disordered media can be treated with a single theory based on weighted averages. Part I provides some basic ideas associated with ordered and disordered media, weighted averages, and the theory of distributions. In Part II a generalized averaging procedure is presented and in Part III the closure problem is developed and the theory is compared with experiment. Parts IV and V provide some geometrical results for computer generated porous media.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A_e area of entrances and exits for the-phase contained within the macroscopic system, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor, m² - L general characteristic length for volume averaged quantities, m - characteristic length (pore scale) for the-phase - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - N unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p0 reference pressure in the-phase, N/m² - p traditional intrinsic volume averaged pressure, N/m² - r0 radius of a spherical averaging volume, m - r position vector, m - r position vector locating points in the-phase, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v traditional superficial volume averaged velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V/V, volume average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

Reservoir transport equations by compositional approach

The objective of this paper is to present an overview of the fundamental equations governing transport phenomena in compressible reservoirs. A general mathematical model is presented for important thermo-mechanical processes operative in a reservoir. Such a formulation includes equations governing multiphase fluid (gas-water-hydrocarbon) flow, energy transport, and reservoir skeleton deformation. The model allows phase changes due to gas solubility. Furthermore, Terzaghi's concept of effective stress and stress-strain relations are incorporated into the general model. The functional relations among various model parameters which cause the nonlinearity of the system of equations are explained within the context of reservoir engineering principles. Simplified equations and appropriate boundary conditions have also been presented for various cases. It has been demonstrated that various well-known equations such as Jacob, Terzaghi, Buckley-Leverett, Richards, solute transport, black-oil, and Biot equations are simplifications of the compositional model.Notation List B reservoir thickness - B formation volume factor of phase - Cⁱ mass of component i dissolved per total volume of solution - C ⁱ mass fraction of component i in phase - C heat capacity of phase at constant volume - C_p heat capacity of phase at constant pressure - D ⁱ hydrodynamic dispersion coefficient of component i in phase - D_MTf thermal liquid diffusivity for fluid f - F = F(x, y, z, t) defines the boundary surface - f_p fractional flow of phase - g gravitational acceleration - H_p enthalpy per unit mass of phase - J_p volumetric flux of phase - k_rf relative permeability to fluid f - k₀ absolute permeability of the medium - M_p ⁱ mass of component i in phase - n porosity - N rate of accretion - P_f pressure in fluid f - p_ca capillary pressure between phases and =p-p - Rⁱ rate of mass transfer of component i from phase to phase - Rⁱ _source source rate of component i within phase - S saturation of phase - s gas solubility - T temperature - t time - U displacement vector - u velocity in the x-direction - v velocity in the y-direction - V volume of phase - V_s velocity of soil solids - W_i body force in coordinate direction i - x horizontal coordinate - z vertical coordinate Greek Letters _p volumetric coefficient of compressibility - _T volumetric coefficient of thermal expansion - _ij Kronecker delta - volumetric strain - _m thermal conductivity of the whole matrix - internal energy per unit mass of phase - gf suction head - density of phase - _ij tensor of total stresses - _ij tensor of effective stresses - volumetric content of phase - f viscosity of fluid f     

A non-dualistic unified field theory of gravitation,electromagnetism and spin

The wisdom of classicalunified field theories in the conceptual framework of Weyl, Eddington, Einstein and Schrödinger has often been doubted and in particular there does not appear to be any empirical reason why the Einstein-Maxwell (E-M) theory needs to be geometrized. The crux of the matter is, however not whether the E-M theory is aesthetically satisfactory but whether it answers all the modern questions within the classical context. In particular, the E-M theory does not provide a classical platform from which the Dirac equation can be derived in the way Schrödinger's equation is derived from classical mechanics via the energy equation and the Correspondence Principle. The present paper presents a non-dualistic unified field theory (UFT) in the said conceptual framework as propounded by M. A. Tonnelat. By allowing the metric formds ²=g dx ^v x ^v and the non-degenerate two-formF=(1/2> _l) dx ^vdx ^vto enter symmetrically into the theory we obtain a UFT which contains Einstein's General Relativity and the Born-Infeld electrodynamics as special cases. Above all, it is shown that the Dirac equation describing the electron in an external gravito-electromagnetic field can be derived from the non-dualistic Einstein equation by a simple factorization if the Correspondence Principle is assumed.     

Robustness of Exponential Dichotomies in Infinite-Dimensional Dynamical Systems

In this paper we examine the issue of the robustness, or stability, of an exponential dichotomy, or an exponential trichotomy, in a dynamical system on an Banach space W. These two hyperbolic structures describe long-time dynamical properties of the associated time-varying linearized equation _t +A=B(t) , where the linear operator B(t) is the evaluation of a suitable Fréchet derivative along a given solution in the set K in W. Our main objective is to show, under reasonable conditions, that if B(t)=B(, t) depends continuously on a parameter and there is an exponential dichotomy, or exponential trichotomy, at a value ₀, then there is an exponential dichotomy, or exponential trichotomy, for all near ₀.We present several illustrations indicating the significance of this robustness property.     

Flow visualization of compressible vortex structures using density gradient techniques

Mathematical results are derived for the schlieren and shadowgraph contrast variation due to the refraction of light rays passing through two-dimensional compressible vortices with viscous cores. Both standard and small-disturbance solutions are obtained. It is shown that schlieren and shadowgraph produce substantially different contrast profiles. Further, the shadowgraph contrast variation is shown to be very sensitive to the vortex velocity profile and is also dependent on the location of the peak peripheral velocity (viscous core radius). The computed results are compared to actual contrast measurements made for rotor tip vortices using the shadowgraph flow visualization technique. The work helps to clarify the relationships between the observed contrast and the structure of vortical structures in density gradient based flow visualization experiments.Nomenclature a Unobstructed height of schlieren light source in cutoff plane, m - c Blade chord, m - f Focal length of schlieren focusing mirror, m - C _T Rotor thrust coefficient, T/( ² R ⁴) - I Image screen illumination, Lm/m ² - l Distance from vortex to shadowgraph screen, m - n _b Number of blades - p Pressure,N/m ² - p Ambient pressure, N/m ² - r, , z Cylindrical coordinate system - r _c Vortex core radius, m - Non-dimensional radial coordinate, (r/r _c ) - R Rotor radius, m - Tangential velocity, m/s - Specific heat ratio of air - Circulation (strength of vortex), m ²/s - Non-dimensional quantity, ² 8²p r _c ² - Refractive index of fluid medium - ₀ Refractive index of fluid medium at reference conditions - Gladstone-Dale constant, m ³/kg - Density, kg/m ³ - Density at ambient conditions, kg/m ³ - Non-dimensional density, (/ ) - Rotor solidity, (n _b c/ R) - Rotor rotational frequency, rad/s     

Analytical Solution for the Effect of Viscous Dissipation on Mixed Convection in Saturated Porous Media

A new analytical solution is introduced for the effect of viscous dissipation on mixed convection flow and heat transfer about an isothermal vertical wall embedded in Darcy and non-Darcy porous media with uniform free stream velocity. The effect of viscous dissipation on mixed convection in both regimes has been analyzed for both the aiding and opposing flows using Gebhart number, Ge _x =gx/c _p. The governing parameters are Re, Ra, Pe and Ge _x . The case of Re=0 corresponds to Darcy mixed convection region and Re/Pe is identified as the mixed convection governing parameter, Ra=0 leading to pure forced convection. A good agreement was found between the numerical and analytical solutions. It was found from the Nusselt number results that viscous dissipation lowers the heat transfer rate in both Darcy and Forchheimer flow regimes for aiding as well as opposing flows.     

Mixed convection flow in narrow vertical ducts

The mixed convection flow in a vertical duct is analysed under the assumption that , the ratio of the duct width to the length over which the wall is heated, is small. It is assumed that a fully developed Poiseuille flow has already been set up in the duct before heat from the wall causes this to be changed by the action of the buoyancy forces, as measured by a buoyancy parameter . An analytical solution is derived for the case when the Reynolds numberRe, based on the duct width, is of 0 (1). This is extended to the case whenRe is 0 (^–1) by numerical integrations of the governing equations for a range of values of representing both aiding and opposing flows. The limiting cases, || 1 andR=Re of 0 (1), andR and both large, with of 0 (R ^1/3) are considered further. Finally, the free convection limit, large with R of 0 (1), is discussed.

---

Mischkonvektion in engen senkrechten Rohren

Zusammenfassung Mischkonvektion in einem senkrechten Rohr wird unter der Voraussetzung untersucht, daß das Verhältnis der Rohrbreite zur Länge, über welche die Wand beheizt wird, klein ist. Es wird angenommen, daß sich bereits eine voll entwickelte Poiseuille-Strömung in dem Rohr eingestellt hat, bevor Antriebskräfte, gemessen mit dem Auftriebsparameter , aufgrund der Wandbeheizung die Strömung verändern. Es wird eine analytische Lösung für den Fall erhalten, daß die mit der Rohrbreite als charakteristische Länge gebildete Reynolds-ZahlRe konstant ist. Dies wird mittels einer numerischen Integration der wichtigsten Gleichungen auf den FallRe =f (^–1) sowohl für Gleich- als auch für Gegenstrom ausgedehnt. Weiterhin werden die beiden Grenzfälle betrachtet, wenn || 1 undR=Re konstant ist, sowieR und beide groß mit proportionalR ^1/3. Schließlich wird der Grenzfall der freien Konvektion, großes mit konstantem R, diskutiert.

---

Nomenclature g acceleration due to gravity - Gr Grashof number - G modified Grashof number - h duct width - l length of the heated section of the duct wall - p pressure - Pr Prandtl number - Q flow rate through the duct - Q ₀ heat transfer on the wally=0 - Q ₁ heat transfer on the wally=1 - Re Reynolds number - R modified Reynolds number - T temperature of the fluid - T ₀ ambient temperature - T applied temperature difference - u, velocity component in thex-direction - v, velocity component in they-direction - x, co-ordinate measuring distance along the duct - y, co-ordinate measuring distance across the duct - buoyancy parameter - ₀ modified buoyancy parameter, ₀=R ^–1/3 - coefficient of thermal expansion - ratio of duct width to heated length, =h/l - (non-dimensional) temperature - _w applied temperature on the wally=0 - kinematic viscosity - density of the fluid - ₀ shear stress on the wally=0 - ₁ shear stress on the wally=1 - stream function