Kinetics and mechanism of formation and dissociation of copper(II) and nickel(II) complexes of the Schiff base bis(acetylacetone)ethylenediimine in aqueous-organic solvent media

Summary In NH₄NO₃+NH₄OH buffered 10% (v/v) dioxan-water media (pH 7.0–8.5), thePseudo-first-order rate constant for the formation of the title complexes M(baen),i.e. ML, conforms to the equation 1/k_obs=1/k+1/(kK_o.s · T_L), where T_L stands for the total ligand concentration in the solution, K_o.s is the equilibrium constant for the formation of an intermediate outer sphere complex and k is the rate constant for the formation of the complex ML from the intermediate. Under the experimental conditions the free ligand (pK_a>14) exists virtually exclusively in the undissociated form (baenH₂ or LH₂) which is present mostly as a keto-amine in the internally hydrogen-bonded state. Although the observed formation-rate ratio k^Cu/k^Ni is of the order of 10⁵, as expected for systems having normal behaviour, the individual rate constants are very low (at 25°C, k^Cu=50 s^–1 and k^Ni=4.7×10^–4s^–1) due to the highly negative S values (–84.2±3.3 JK^–1M^–1 for CuL and –105.8±4.1 JK^–1M^–1 for NiL); the much slower rate of formation of the nickel(II) complex is due to higher H value (41.2±1.0 kJM^–1 for CuL and 78.2±1.2 kJM^–1 for NiL) and more negative S value compared to that of CuL. The K_o.s values are much higher than expected for simple outer-sphere association between [M(H₂O)₆] and LH₂ and may be due to hydrogen bonding interaction.In acid media ([H⁺], 0.01–0.04 M) these complexes M(baen) dissociate very rapidly into the [M(H₂O)₆]²⁺ species and baenH₂, followed by a much slower hydrolytic cleavage of the ligand into its components,viz. acetylacetone and ethylenediamine (protonated). For the dissociation of the complexes k_obs=k₁[H⁺]+k₂[H⁺]². The reactions have been studied in 10% (v/v) dioxan-water media and also ethanolwater media of varying ethanol content (10–25% v/v) and the results are in conformity with a solvent-assisted dissociativeinterchange mechanism involving the protonated complexes.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

Kinetics of base hydrolysis of trans-{Cr([15]aneN4)Cl2}+ ([15]aneN4 = 1,4,8,12-tetra-azacyclopentadecane)

Summary Reaction of CrCl₃(DMF)₃ with [15]aneN₄ (L; L = 1,4,8,12-tetra-azacyclopentadecane) gives the green trans-{Cr([15]-aneN ₄)Cl₂}Cl in high yield. The base hydrolysis kinetics of the cations [CrLCl₂]⁺ and [CrLCl(OH)] ⁺ have been investigated over a temperature range. For the dichloro complex, k _OH = 1.03 dm³ mol^–1 s^–1] at 25° C with H =30.4 kJmol^–1 and S _inf298 ^sup = -143 JK^–1 mol^–1. The substantial negative entropy of activation implies more association of water in the loss of Cl^– from the conjugate base in a D_CB mechanism. The kinetic parameters for the chlorohydroxo complex are k _OH = 1.9 × 10^–2dm³mol^–1 s^–1 at 25°C with H = 78.3kJmol^–1 and H _inf298 ^sup = -15 J K^–1 mol ^–1. The chlorohydroxo complex probably has the trans VI configuration with the chloride ligand on the same side of the equatorial plane as the four chiral sec-NH groups. The visible spectra of a variety of complexes trans-[Cr(L)XY] ⁿ⁺ (X = Y = Cl, OH, OH₂; X = Cl, Y = OH) have been determined.     

Structure of the Cu(II) chloride complex with 4-amino-l,2,4-triazole Cu(C2H4N4)Cl2

The coordination compounds of copper(II) chloride and bromide with 1,2,4-triazole (L¹) and 4-amino1,2,4-triazole (L²), CuL¹Hal₂ and CuL²Hal₂, possess interesting magnetic properties [1, 2]. For example, at very low temperatures CuL¹Cl₂ and CuL¹Br₂ are ferromagnets [2](T _c ≈ 3.3 and 6.5 K, respectively). To explain the magnetic behavior of copper(II) halide complexes with the above nitrogen heterocycles it is generally assumed that the complexes are polynuclear chain compounds in which the copper atoms are bridged by two halogen ions and bridging bidentate heterocycle molecules (coordination of N1 and N2 atoms). This hypothesis is made on the basis of the X-ray diffraction analysis of CuL¹Cl₂ [3]. It is interesting to perform an X-ray diffraction study of CuL²Cl₂ and CuL2Br2; this is important for obtaining reliable magnetostructural correlations for this group of compounds. In this study, we investigated single crystals of the complexes; this demanded choosing special conditions of synthesis, which differ from the conditions suggested for the synthesis of polycrystals in [1]. In this communication we report on the results of synthesis and X-ray diffraction analysis of the single crystals of the coordination compound CuL²Cl₂. Translated fromZhurnal Strukturnoi Khimii, Vol. 38, No. 1, pp. 207–212, January–February, 1997.     

Syntheses,crystal structures and magnetic properties of two cyano-bridged two-dimensional assemblies [Fe(salpn)]2 [Fe(CN)5NO] and [Fe(salpn)]2[Ni(CN)4]

Two cyano-bridged assemblies, [Fe^III(salpn)]₂[Fe^II(CN)₅NO] (1) and [Fe^III (salpn)]₂[Ni^II(CN)₄] (2) [salpn = N, N-1,2-propylenebis(salicylideneiminato)dianion], have been prepared and structurally and magnetically characterized. In each complex, [Fe(CN)₅NO]^2– or [Ni(CN)₄]^2– coordinates with four [Fe(salpn)]⁺ cations using four co-planar CN^– ligands, whereas each [Fe(salpn)]⁺ links two [Fe(CN)₅NO]^2– or [Ni(CN)₄]^2– ions in the trans form, which results in a two-dimensional (2D) network consisting of pillow-like octanuclear [—M^II—CN—Fe^III—NC—]₄ units (M = Fe or Ni). In complex (1), the NO group of [Fe(CN)₅NO]^2– remains monodentate and the bond angle of Fe^II—N—O is 180.0°. The variable temperature magnetic susceptibilities, measured in the 5–300 K range, show weak intralayer antiferromagnetic interactions in both complexes with the intramolecular iron(III)iron(III) exchange integrals of –0.017 cm^–1 for (1) and –0.020 cm^–1 for (2), respectively.     

Synthetic and kinetic studies on copper(II), nickel(II) and cobalt(III) complexes of 1,4,7,10,13-pentaazacyclohexadecane ([16]aneN5)

Summary The pentadentate macrocycle 1,4,7,10,13-penta-azacyclo-hexadecane [16]aneN₅=(3)=L} has been prepared and a variety of copper(II), nickel(II) and cobalt(III) complexes of the ligand characterised. The copper complex [CuL](ClO₄)₂, on the basis of its d-d spectrum, appears to be square pyramidal, while [NiL(H₂O)](ClO₄)₂ is octahedral. The copper(II) and nickel(II) complexes dissociate readily in acidic solution and these reactions have been studied kinetically. For the copper(II) complex, rate=k_H[complex][H⁺]² with k_H =4.8 dm⁶ mol^–2s^–1 at 25 °C and I=1.0 mol dm^–3 (NaClO₄) with H=43 kJ mol^–1 and S ₂₉₈ =–89 JK^–1 mol^–1. Dissociation rates of the copper(II) complexes increase with ring size in the order: [15]aneN₅ < [16]aneN₅ < [17]aneN₅. For the dissociation of the nickel(II) complex, rate=k_H[Complex][H⁺] with k_H=9.4×10^–3 dm³mol^–1 s^–1 at 25 °C and I =1.0 mol dm^–3 (NaClO₄) with H=71 kJ mol^–1 and S ₂₉₈ =–47 JK^–1mol^–1.The cobalt(III) complexes, [CoLCl](ClO₄)₂, [CoL(H₂O)]-(ClO₄)₃, [CoL(NO₂)](ClO₄)₂, [CoL(DMF)](ClO₄)₃ (DMF=dimethylformamide) and [CoL(O₂CH)](ClO₄)₂ have been characterised. The chloropentamine [CoCl([16]aneN₅)]²⁺ undergoes rapid base hydrolysis with k_OH=1.1× 10⁵dm³ mol^–1s^–1 at 25°C and I=0.1 mol dm^–3 (H=73 kJ mol^–1 and S ₂₉₈ =98 JK^–1 mol^–1). Rapid base hydrolysis of [CoL(NO₂)]²⁺ is also observed and the origins of these effects are considered in detail.     

Copper(II) and nickel(II) complexes of mono-oxocyclam(5-oxo-1,4,8,11-tetraazacyclotetradecane). Synthetic and potentiometric studies

Summary The macrocyclic mono-oxotetraamine, 5-oxo-1,4,8,11-tetraazacyclotetradecane (mono-oxocyclam=LH) has been prepared by reaction of methyl acrylate with 2,3,2-tetra(1,9-diamino-3,7-diazanonane). The protonation constants of the ligand are log K₁=9.40, log K₂=6.65 and log K₃=2.87 at 25 °C (I=0.1 mol dm^–3 NaClO₄). Detailed potentiometric studies of the interaction of the base with copper(II) and nickel(II) have been carried out. In the pH range 2.5–7.0 two complexes, [CuLH]²⁺ and [CuL]⁺, form; the deprotonated complex being 100% abundant at pH 7. For nickel(II), only [NiL]⁺ forms (log _11–1 = 3.90), the yellow low spin nickel complex reaching its maximum concentration above pH 6. The [CuL][ClO₄] · H₂O and [NiL][ClO₄] 0.5 H₂O complexes have been characterised in the solid state. The nickel(II) complex is square planar with a d-d band at 22625 cm^–1.     

Kinetics and mechanism of pentacyanohydroxoferrate(III) formation from [FeL(OH)2]− complex, (L=N-(2-hydroxyethyl) iminodiacetate anion

Summary The kinetics and mechanism of the system [FeHIDA-(OH)₂]^–+5CN^–[Fe(CN)₅OH^–+HIDA^2–+OH^– (HIDA=N-(2-hydroxyethyl) (iminodiacetate) at pH=9.5±0.02, I=0.1 M and at 25±0.1°C have been studied spectrophotometrically at 395 nm ( _max of [Fe(CN)₅OH]^3–]. The reaction has three distinguishable stages; the first is formation of [Fe(CN)₅OH]^3–, the second is conversion of [Fe(CN)₅OH]^3– into [Fe(CN)₆]^3–, and last is the reduction of [Fe(CN)₆]^3– to [Fe(CN)₆]^4– by the HIDA^2– released in the first stage. The first stage shows variable-order dependence on cyanide concentration, unity at high cyanide concentration and zero at low cyanide concentration. The second stage exhibits first-order dependence on the concentration of [Fe(CN)₅OH]^3– as well as on cyanide. The reverse reaction between [Fe(CN)₅OH]^3– and HIDA^2– is first-order in each of these species and inverse first-order in cyanide. On the basis of forward and reverse rate studies, a five-step mechanism has been proposed for the first stage. The first step involves a slow loss of one OH^–, by a cyanide-independent path.     

Kinetics and mechanisms of homogeneous catalytic reactions. Part 3. Regioselective,catalysed [RuH(CO)(NCMe)2(PPh3)2]BF4 reduction of quinoline

Summary A kinetic study of the regioselective homogeneous hydrogenation of quinoline (Q) to 1,2,3,4-tetrahydroquinoline (THQ) was carried out using the cationic complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) as the precatalyst. The experimentally determined rate law wasr = {k ₂ K ₁/(1+K ₁[H₂])}[Ru₀][H₂]², which becomesr = {k ₂ K ₁[Ru₀]–[H₂]² at low hydrogen concentrations (k ₂ K ₁ = 28.5M ^–2 s^–1 at 398 K). The corresponding activation parameters were found to be H = 42 + 6 kJ mol^–1, S = – 115 ± 2JK^–1mol^–1 and G = 92 ± 8 kJ mol^–1. Complex(1) was found to react with Q in CHCl₃ under reflux to yield [RuH(CO)(NCMe)(N-Q)(PPh₃)₂]BF₄ (2) which was also isolated from the hydrogenation runs. These experimental findings, together with the results ofab initio self-consistent-field molecular orbital calculations on the free organic molecules involved, are consistent with a mechanism involving a rapid and reversible partial hydrogenation of(2) to yield the corresponding dihydroquinoline (DHQ) species [RuH(CO)(NCMe)(DHQ)(PPh₃)₂]BF₄ (4), followed by a rate-determining second hydrogenation of DHQ to yield [RuH(CO)(NCMe)(THQ)(PPh₃)₂]BF₄ (3).     

Copper(I) and copper(II) complexes of diamino-dithioether ligands

Summary Copper(II) salts were reacted with two diamino-dithioether ligands, i.e. 1,3-di(o-aminophenylthio)propane (abbreviated H₂L¹) and 1,2-di(o-aminophenylthio)xylene (abbreviated H₂L²). Mixtures of copper(I) and copper(II) complexes were obtained with Cl^– and ClO ₄ ^– counterions. The major products were the copper(I) complexes, which were obtained pure after recrystallisation from MeCN-MeOH. The ligands lose two protons from the amine functions to form copper(I) complexes of general formula [CuL]X, where X = ClO ₄ ^– or Cl^–. The complexes were oxidised to [CuL]X₂ with H₂O₂ in DMF. Cu(NO₃)₂ on the other hand gave [CuH₂LNO₃]NO₃.     

Hydrolysis of [Pt(dien)H2O]2+ and [Pd(dien)H2O]2+ complexes in water

The hydrolysis of the [Pt(dien)H₂O]²⁺ and [Pd(dien)H₂O]²⁺ complexes has been investigated by potentiometry at 298 K, in 0.1 mol dm^–3 aqueous NaClO₄. Least-squares treatment of the data obtained indicates the formation of mononuclear and -hydroxo-bridged dinuclear complexes with stability constants: log ₁₁ = –6.94 for [Pt(dien)OH]⁺, log ₁₁ = –7.16 for [Pd(dien)OH]⁺, and also log ₂₂ = –9.37 for [Pt₂(dien)₂(OH)₂]²⁺ and log ₂₂ = –10.56 for [Pd₂(dien)₂(OH)₂]²⁺. At pH values > 5.5, formation of the dimer becomes significant for the Pt^II complex, and at pH > 6.5 for the Pd^II complex. These results have been analyzed in relation to the antitumor activity of Pt^II complexes.     

Kinetic exchange studies of metal ion substitution in EDTA chelates Fe(III)- UO2 EDTA exchange

A kinetic study of the exchange reaction between UO₂EDTA complex and Fe(III), at a constant ionic strength of 0.1, over the concentration range of 5×10^–3–1×10^–2 M of each reactant and pH 4.5–5.5 has been carried out radiometrically. The rate of the exchange process can be expressed by the equation: R=k₁[UO₂EDTA][Fe]+k₂[EDTA][H⁺]^–1. The activation parameters calculated were H^*=25.95 kJ mol^–1 and S^*=0.67 kJ mol^–1 K^–1.     

Studies on the kinetics and mechanism of dissociation of copper(II) and nickel(II) complexes of the macrocyclic ligand 1, 5, 9, 13-tetraaza-2, 4, 4, 10, 12, 12-hexamethyl-cyclohexadecane-1, 9-diene in perchloric acid media

Summary Acid catalysed dissociation of the copper(II) and nickel(II) complexes (ML²⁺ of the quadridentate macrocyclic ligand 1, 5, 9, 13-tetraaza-2, 4, 4, 10, 12, 12-hexamethyl-cyclohexadecane-1, 9-diene (L) has been studied spectrophotometrically. Both complexes dissociate quite slowly with the observed pseudo-first order rate constants (k_obs) showing acid dependence; for the nickel(II) complex (k_obs)=k_O+k_H[H⁺], the k_o path is however absent with the copper(II) complex. At 60°C (I=0.1M) the k_H values areca 10^–4 M^–1 s^–1 for both complexes; k _H ^Cu /k _H ^Ni =ca. 3.9, comparable to some other square-planar complexes of these metal ions. The rate difference is primarily due to H values [copper(II) complex, 29.4±0.5 kJ mol^–1; nickel(II) complex, 35.6±1.5 kJ mol^–1] with highly negative S values [for copper(II), –215.5 ±6.1 JK^–1 mol^–1 and for nickel(II), –208.1 ±5.6 JK^–1 mol^–1] which are much higher than the entropy of solvation of Ni²⁺ (ca. –160 JK^–1 mol^–1) and Cu²⁺ (ca. –99 JK^–1 mol^–1) ions; significant solvation of the released metal ions and the ligand is indicated.     

Effect of physicochemical properties of water-propane-2-ol mixture and temperature on thermodynamics of Cu complexation with glycine

The stability constants of Cu²⁺ complexes with glycine are determined by potentiometric method in water-propane-2-ol mixture, i.e., [CuL]⁺, CuL₂ (L = Gly^–) (0.070, 0.167, 0.310 mole fraction of alcohol), and [CuHL]²⁺ (0.070 mole fraction of alcohol) at 298.15, 308.15, and 318.15 K. Thermodynamic characteristics of Cu²⁺ complexation with glycine and the Gibbs energy of transfer of complex species [CuL]⁺ and CuL₂ from water to a mixed solvent are calculated. The solvation-thermodynamic analysis of effects of water-propane-2-ol solvents and of separate solvation contributions of reagents to Cu²⁺ coordination with glycine is performed. The increasing stability of the [CuL]⁺ and CuL₂ complexes in water-propane-2-ol as compared to that in pure water is explained by the increasing energy of solvation of complex species [CuL]⁺ and CuL₂ and by the decreasing energy of solvation of Cu²⁺ and Gly^– ions.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 4, 2005, pp. 311–318.Original Russian Text Copyright © 2005 by Tsurko, Bondarev, Shikhova, Khrebto.     

Metal ion catalysed aquation of carboxylatoamine cobalt(III) complexes. Kinetics of copper(II) catalysed aquation ofcis(diformato)bis(ethylenediamine)cobalt(III) ion

Summary The aquation ofcis-[(en)₂Co(CO₂H)₂]⁺ tocis-[(en)₂Co(OH₂)(CO₂H)]²⁺ is catalysed by Cu²⁺ and the rate equation, –d[complex]_t/dt=(k_Cu[Cu²⁺]+k_H [H⁺]) [complex)_T is valid at [Cu²⁺]_T=0.01–0.1, I=0.5 and [HClO₄]=0.005 mol dm^–3. The rate measurements are reported at 30, 35, 40 and 45°C and the rate and activation parameters for the Cu²⁺ and H⁺-catalysed paths are: k_H(35°C)=(2.44±0.09)×10^–2 dm³ mol^–1 s^–1, H=83±13 kJ mol^–1, S=–8±42 JK^–1 mol^–1, k _Cu (35°C)=(3.30±0.09)×10^–3 dm³ mol^–1 s^–1, H=73.2±6.1 kJ mol^–1, S=–55±20 JK^–1 mol^–1. The formate-bridged innersphere binuclear complex,cis-[(en)₂Co{(O₂CH)₂Cu}]³⁺ may be involved as the catalytically active intermediate in the copper(II)-catalysed path, just as the corresponding H⁺-bridged species presumed to be present in the acidcatalysed path.     

Kinetics of the oxidation of iodide by copper(III)-imine-oxime complexes

Summary The copper(III)-imine-oxime complexes [Cu^III(Enio)]⁺ and [Cu^III(Pre)]⁺ {EnioH₂ =N,N-ethylene bis(isonitrosoacetylacetoneimine) and PreH₂ = N,N-propylene bis (isonitrosoacetylacetoneimine)} react very rapidly with iodide. The rate law under fixed conditions for the reaction is given by the equation: –d[Cu^III]/dt = (2k₂[I^–] + 2k₃[I^–]²)[Cu^III] The [Cu^III(Enio)]⁺ reaction was pH-independent whereas the [Cu (Pre)]⁺ reaction rate increased with increasing pH. Both the k₂ and the k₃ pathways are believed to involve one-electron transfer. An inner-sphere mechanism may operate in the pathway, first-order in [I^–].     

Kinetic studies on the dimerization of molybdenum(V) in acid media and the crystal structure of K[MoOCl4(OH2)] · H2O

Summary [MoOCl₅]^2– aquates rapidly in solutions ofca. 5 M or less in HCl or MeSO₃H to give an intermediate which changes to the well known ion, Mo₂O _4aq ²⁺ at a lower rate. Solutions of molybdenum(V) in 12M MeSO₃H, when diluted, also change at a similar rate to Mo₂O ₄ ²⁺ . The rate of reaction, d[Mo₂O ₄ ²⁺ ]/ dt=k[Mo^V] has a value of k=30.(1)s^–1 at 0°C in 5.00 MMeSO₃H. At constant ionic strength, k is nearly independent of acidity (5.2–0.5 M) and is only slightly affected by exchanging MeSO ₃ ^– with Cl^– orp-toluenesulfonate ion. At low ionic strength k increases dramatically. In 4.78 MMeSO₃H, the activation parameters are: H=72.68(29) kJ/mole, S=16.63(8) jmole · K and k=5.01(5)×10²s^–1 at 0°C.¹⁸O measurements on the oxygen transfer between MoO _aq ³⁺ and Mo₂O _4aq. ²⁺ were partially inconclusive. A mechanistic interpretation is given to the kinetic results. The x-ray crystal structure of KMoOCl₄(OH₂)·H₂O is reported.On leave from Daegu University, Daegu, Korea.     

Kinetics and mechanism of the copper(II) promoted hydrolysis of the methyl ester of ethylenediaminemonoacetate

Summary Base hydrolysis of methyl ethylenediaminemonoacetate has been studied at I=0.1 mol dm^–3 (NaClO₄) over the pH range 7.4–8.8 at 25 °C. The proton equilibria of the ligand can be represented by the equations, where E is the free unprotonated ester species. Values of pK₁ and pK₂ are 4.69 andca. 7.5 at 25° (I=0.1 mol dm^–3). For base hydrolysis of EH⁺, k_OH=1.1×10³ dm³ mol^–1 s^–1 at 25 °C. The species E is shown to undergo lactamisation to give 2-oxopiperazine (k_lact ca. 1×10^–3 s^–1) at 25 °C. Formation of the lactam is indicated both by u.v. measurements and by isolation and characterisation of the compound.Base hydrolysis of the ester ligand in the complex [CuE]²⁺ has been studied over a range of pH and temperature, k _OH ²⁵ =9.3×10⁴ dm³ mol^–1 s^–1 with H=107 kJ mol^–1 and S ₂₉₈ =209 JK^–1 mol^–1. Base hydrolysis of [CuE]²⁺ is estimated to be some 10⁵5 fold faster than that of the free ester ligand. The results suggest that base hydrolysis occursvia a chelate ester species in which the methoxycarbonyl group of the ligand is bonded to copper(II).     

The hydrolysis and fluoride complexation behavior of Fe(III) at 25°C and 0.68 molal ionic strength

Fe(III) hydrolysis and fluoride complexation behavior was examined in 0.68 molal sodium perchlorate at 25°C. Our assessment of the complexation of Fe(III) by fluoride ions produced the following results: log_F1 = 5.15₅, log_F2 = 9.10₇, log_F3 = 11.96, log_F4 = 13.7₅, where log_Fn = 5.15₅=[FeF _n ^(3-n)+ ][Fe³⁺]^–1[F^–]^–n. The stepwise fluoride complexation constants,FK _n+1, obtained in our work (where log_F K _n+1 =log_Fn) indicate that K _n+1/K _n =0.072±0.01. Formation constants for equilibria, Fe³⁺+nH₂OFe(OH) _n ^(3–n)+ +nH⁺, expressed in the form _n ^* [Fe(OH) _n ^(3-n)+ ][H⁺]ⁿ ,[Fe ³⁺]^-1, were estimated as ₁ ^* = –2.754, and ₂ ^* –7. Our study indicates that the results of previous hydrolysis investigations include very large overestimates of Fe(OH) ₂ ⁺ formation constants.     

Rare earth element complexation by fluoride ions in aqueous solution

Rare earth fluoride stability constants for Ce, Eu, Gd, Tb and Yb at 25°C have been determined by examining the influence of fluoride ions on the distribution of rare earths between tributyl phosphate (TBP) and 0.68M NaClO₄. Our results indicate that rare earth mono and difluoro complexation constants show a steady increase as a function of atomic number from La to Tb but remain relatively constant after Dy. This behavior is similar to that which has been observed for dicarboxylic acids. Stepwise stability constant ratios, K₂/K₁, obtained in our work (where K₁=[MF²⁺][M³⁺]^–1[F^–]^–1 and K₂=[MF ₂ ⁺ ]^–1[MF²⁺]^–1[F^–]^–1) indicated that, for all rare earths, K₂/K₁=0.09±0.03.