Gadolinium oxide high-k gate dielectrics prepared by anodic oxidation

The growth and properties of gadolinium oxide (Gd₂O₃) films prepared by anodic oxidation were investigated. Uniform Gd₂O₃ thin film with good oxide quality was obtained. The X-ray diffraction (XRD) pattern of the Gd₂O₃ films showed that they had a poly-crystalline structure. The dielectric constants of Gd₂O₃ films oxidized at 30 and 60 V are 9.4 and 12.2, respectively. The equivalent oxide thickness (EOT) of the Gd₂O₃ stacked oxide is in the range of 5.8-9.4 nm. The MOS capacitor with Gd₂O₃ exhibits interesting electrical properties. Longer oxidation time reduced the leakage current density for 30 V anodic oxidation but increased the leakage current density for 60 V anodic oxidation. This work reveals that Gd₂O₃ could also be an alternative dielectric for Si substrate and therefore, might pave the way to fabricate CMOS devices in the future.     

Study of HfSiO film prepared by electron beam evaporation for high-k gate dielectric applications

The purpose of this paper is to report some experimental results with HfSiO films formed on silicon substrates by electron beam evaporation (EB-PVD) and annealed at different temperatures. The images of atomic force microscope (AFM) indicated that HfSiO film annealed at 900 °C was still amorphous, with a surface roughness of 0.173 nm. X-ray photoelectron spectroscopy (XPS) analysis revealed that the chemical composition of the film was (HfO₂)₃(SiO₂) and Hf-Si-O bonds existed in the annealed film. Electrical measurements showed that the equivalent oxide thickness (EOT) was 4 nm, the dielectric constant was around 6, the breakdown voltage was 10 MV/cm, the fixed charge density was −1.2 × 10¹² cm⁻², and the leakage current was 0.4 μA/cm² at the gate bias of 2 V for 6 nm HfSiO film. The annealing after deposition effectively reduced trapping density and the leakage current, and eliminated hysteresis in the C-V curves. Annealing also induced SiO₂ growth at the interface.     

Electrical characteristics of polycrystalline Si layers embedded into high-k Al2O3 gate layers

The electrical characteristics of polycrystalline Si (poly Si) layers embedded into high-k Al₂O₃ (alumina) gate layers are investigated in this work. The capacitance versus voltage (C-V) curves obtained from the metal-alumina-polysilicon-alumina-silicon (MASAS) capacitors exhibit significant threshold voltage shifts, and the width of their hysteresis window is dependent on the range of the voltage sweep. The counterclockwise hysteresis observed in the C-V curves indicates that electrons originating from the p-type Si substrate in the inversion condition are trapped in the floating gate layer consisting of the poly Si layer present between the top and bottom Al₂O₃ layers in the MASAS capacitor. Also, current versus voltage (I-V) measurements are performed to examine the electrical characteristics of the fabricated capacitors. The I-V measurements reveal that our MASAS capacitors show a very low leakage current density, compared to the previously reported results.     

Characterization of gadolinium oxide film by pulse laser deposition

In this work, Gd-oxide dielectric films were deposited on Si by pulse laser deposition method (PLD), moreover, the micro-structures and electrical properties were reported. High-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) indicated that Gd-oxide was polycrystalline Gd₂O₃ structure, and no Gd metal phase was detected. In addition, both interface at Si and Ni fully silicide (FUSI) gate were smooth without the formation of Si-oxide. X-ray photoelectron spectroscopy (XPS) confirmed the formation of Gd₂O₃ and gave an atom ratio of 1:1 for Gd:O, indicating O vacancies existed in Gd₂O₃ polycrystal matrix even at O₂ partial pressure of 20 mTorr. Electrical measurements indicated that the dielectric constant of Gd-oxide film was 6 and the leakage current was 0.1 A/cm² at gate bias of 1 V.     

Microstructure and dielectric properties of La2O3 doped amorphous SiO2 films as gate dielectric material

As a potential gate dielectric material, the La₂O₃ doped SiO₂ (LSO, the mole ratio is about 1:5) films were fabricated on n-Si (0 0 1) substrates by using pulsed laser deposition technique. By virtue of several measurements, the microstructure and electrical properties of the LSO films were characterized. The LSO films keep the amorphous state up to a high annealing temperature of 800 °C. From HRTEM and XPS results, these La atoms of the LSO films do not react with silicon substrate to form any La-compound at interfacial layer. However, these O atoms of the LSO films diffuse from the film toward the silicon substrate so as to form a SiO₂ interfacial layer. The thickness of SiO₂ layer is only about two atomic layers. A possible explanation for interfacial reaction has been proposed. The scanning electron microscope image shows the surface of the amorphous LSO film very flat. The LSO film shows a dielectric constant of 12.8 at 1 MHz. For the LSO film with thickness of 3 nm, a small equivalent oxide thickness of 1.2 nm is obtained. The leakage current density of the LSO film is 1.54 × 10⁻⁴ A/cm² at a gate bias voltage of 1 V.     

Characteristics of sandwich-structured Al2O3/HfO2/Al2O3 gate dielectric films on ultra-thin silicon-on-insulator substrates

Sandwich-structure Al₂O₃/HfO₂/Al₂O₃ gate dielectric films were grown on ultra-thin silicon-on-insulator (SOI) substrates by vacuum electron beam evaporation (EB-PVD) method. AFM and TEM observations showed that the films remained amorphous even after post-annealing treatment at 950 °C with smooth surface and clean silicon interface. EDX- and XPS-analysis results revealed no silicate or silicide at the silicon interface. The equivalent oxide thickness was 3 nm and the dielectric constant was around 7.2, as determined by electrical measurements. A fixed charge density of 3 × 10¹⁰ cm⁻² and a leakage current of 5 × 10⁻⁷A/cm² at 2 V gate bias were achieved for Au/gate stack /Si/SiO₂/Si/Au MIS capacitors. Post-annealing treatment was found to effectively reduce trap density, but increase in annealing temperature did not made any significant difference in the electrical performance.     

Properties of high-k Ti1−xSixO2 gate dielectric layers prepared at room temperature

High-k Ti_1−xSi_xO₂ gate dielectric layers were prepared at room temperature by RF magnetron sputtering using SiO₂ and TiO₂ targets to investigate their applicability to transparent thin-film transistors as well as metal-oxide-semiconductor field-effect transistors. Based on XRD and XPS analyses, it was found that, regardless of the deposition time, the Ti_1−xSi_xO₂ gate dielectric layers had more stable Si-based phases with stronger Si-O bonds with increasing SiO₂ RF power. As SiO₂ RF power increased, the capacitance of the dielectric layers decreased due to the higher fraction of the Si-based phases, and the leakage current decreased, dominantly because of the decrease in oxygen vacancies due to the formation of stoichiometric SiO₂. The Ti_1−xSi_xO₂ gate dielectric layers exhibited high transparency above 80% and moderate bandgap of 4.1-4.2 eV, which can be applied to transparent thin-film transistors.     

Probing buried interfaces on Ge-based metal gate/high-k stacks by hard X-ray photoelectron spectroscopy

In this contribution, we present results of a non-destructive in-depth analysis of concentration of chemical components at buried interfaces on Ge-based CMOS by means of hard X-ray photoelectron spectroscopy (HAXPES) and low angle X-ray reflectivity (XRR). Two samples composed of a Ge/Si/SiO₂/HfO₂/TiN stack, with layer and interlayer thicknesses of 2500, 0.9, 0.5, 4.9, 3.4 nm and 2500, 0.7, 1, 5.8, 3 nm have been studied. The use of electrons with kinetic energies from few eV up to 15 keV enables to tune the information depth being able to analyze the desired interface in a non-destructive way. XRR enables the determination of the exact layer thickness and density. The results suggest that the Si interlayer prevents the Ge oxidation. Depth profiles of the electronic structure have been obtained for both samples by following the evolution of the photoemission signal from the Hf 2p_3/2 core level as a function of the photoelectron kinetic energy. The depth profile of the electronic structure reveals the presence of a chemical shift of the Hf 2p_3/2 core level, which is related to an interfacial bonding state. Our results demonstrate the excellent capability of HAXPES to study buried interfaces in a non-destructive way.     

Chemical vapor deposition of ZrxTi1−xO2 and HfxTi1−xO2 thin films using the composite anhydrous nitrate precursors

Zr-Ti and Hf-Ti composite nitrates were successfully developed as single-source precursors for the chemical vapor deposition (CVD) of Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ thin films. The Zr-Ti nitrate can be assumed as a solid solution of the individual Zr and Ti nitrates, and the Zr/Ti molar ratio in the deposited Zr_xTi_1−xO₂ films is consistent with that in the precursor. The Hf-Ti nitrate appears to be a mixture of the Hf and Ti nitrates and the composition of the deposited Hf_xTi_1−xO₂ films depends remarkably on the heating time of precursor. Both Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ films exhibit trade-off properties between band gap and dielectric constant. The obtained results suggest that Zr_xTi_1−xO₂ and Hf_xTi_1−xO₂ films are promising candidates for gate dielectric application to improve the scalability and reduce the leakage current of the future complementary metal-oxide-semiconductor (CMOS) devices.     

Preparation of fluorocarbon thin film deposited by soft X-ray ablation and its electrical characteristics and thermal stability

Fluorocarbon films were deposited by soft X-ray ablation of polytetrafluoroethylene (PTFE) and characterized as low-dielectric-constant interlayer dielectrics. Very rapid deposition of such films at approximately 1500 nm/min could be achieved at room temperature. Fourier-transform infrared spectroscopy (FT-IR) measurement results suggest that the films deposited are primarily formed as one-dimensional chains of (-CF₂-)_n which are partially cross-linked. The cross-link density increases with increasing deposition temperature, which improves the thermal stability. However, the dielectric constant of the films increased abruptly above 300 °C. The dielectric constant and leakage current at 1.0 MV/cm of the film deposited at room temperature were approximately 2.1 and 2.0×10⁻⁹ A/cm², respectively.     

Trap-controlled behavior in ultrathin Lu2O3 high-k gate dielectrics

Amorphous Lu₂O₃ high-k gate dielectrics were grown directly on n-type (100) Si substrates by the pulsed laser deposition (PLD) technique. High-resolution transmission electron microscope (HRTEM) observation illustrated that the Lu₂O₃ film has amorphous structure and the interface with Si substrate is free from amorphous SiO₂. An equivalent oxide thickness (EOT) of 1.1 nm with a leakage current density of 2.6×10⁻⁵ A/cm² at 1 V accumulation bias was obtained for 4.5 nm thick Lu₂O₃ thin film deposited at room temperature followed by post-deposition anneal (PDA) at 600 °C in oxygen ambient. The effects of PDA process and light illumination were studied by capacitance-voltage (C-V) and current density-voltage (J-V) measurements. It was proposed that the net fixed charge density and leakage current density could be altered significantly depending on the post-annealing conditions and the capability of traps to trap and release charges.     

Interface of anodic sulfide-oxide on n-type InSb

A novel anodic sulfidization process for forming native sulfide-oxide films on n-type InSb is described. The results of Auger electron spectroscopy analysis indicate that native sulfide-oxide films are formed from aqueous sulfide solutions. The measured capacitance-voltage characteristics of metal-insulator-semiconductor devices indicate that the films have a low fixed surface charge density of the order of 3×10¹⁰ cm^–2 and small hysteresis. The native sulfide-oxide films leave the surface of n-type InSb practically at flatband and in this respect are superior to the passivation layers of anodic oxide and direct plasma SiN _x . The interface between InSb and its native sulfide-oxide in combination with plasma CVD SiN _x has excellent electrical properties.     

The surface of TiO2 gate of 2DEG-FET in contact with electrolytes for bio sensing use

In order to apply two-dimensional electron-gas-field-effect-transistors (2DEG-FETs) for cell-viability sensors, we investigated the chemical/electrical properties of TiO₂ thin films (13-17 nm) prepared with the sol-gel technique on the gate surface of AlGaAs/GaAs 2DEG-FETs. Photochemical/electrochemical reactions on GaAs surface in electrolytes, which induce the degradation of 2DEG-FET performance, are effectively suppressed by introducing a TiO₂ thin film on the gate area of 2DEG-FETs. Compared to conventional ion-selective FETs (ISFETs), the TiO₂/2DEG-FETs in this study exhibit a high sensitivity (410 mV/mM) for H₂O₂ detection. TiO₂ surfaces show better biocompatibility than GaAs surfaces as demonstrated by direct cell culture on these surfaces.     

C-V characterization of Schottky- and MIS-gate SiGe/Si HEMT structures

Electrical properties of Schottky- and metal-insulator-semiconductor (MIS)-gate SiGe/Si high electron mobility transistors (HEMTs) were investigated with capacitance-voltage (C-V) measurements. The MIS-gate HEMT structure was fabricated using a SiN gate insulator formed by catalytic chemical vapor deposition (Cat-CVD). The Cat-CVD SiN thin film (5 nm) was found to be an effective gate insulator with good gate controllability and dielectric properties. We previously investigated device characteristics of sub-100-nm-gate-length Schottky- and MIS-gate HEMTs, and reported that the MIS-gate device had larger maximum drain current density and transconductance (g_m) than the Schottky-gate device. The radio frequency (RF) measurement of the MIS-gate device, however, showed a relatively lower current gain cutoff frequency f_T compared with that of the Schottky-gate device. In this study, C-V characterization of the MIS-gate HEMT structure demonstrated that two electron transport channels existed, one at the SiGe/Si buried channel and the other at the SiN/Si surface channel.     

Preparation of ZrO2 ultrathin films as gate dielectrics by limited reaction sputtering—On growth delay time at initial growth stage

ZrO₂ thin films were produced by limited reaction sputtering process varying the deposition parameters. An interesting growth phenomenon was observed in the initial growth stage of amorphous samples, appearing to suppress film growth for the first several minutes. The structures of such ultrathin ZrO₂ films were investigated by high-resolution Rutherford backscattering (HR-RBS) and X-ray photoelectron spectroscopy (XPS). The results suggest that the existence of interfacial suboxides due to the adsorption-induced surface reaction and diffusion-induced internal reaction, lead to the deteriorated interfacial performance. The mechanism and effects of the growth delay time on the interfacial characteristics are discussed in detail.     

Effect of Ti doping on Ta2O5 stacks with Ru and Al gates

The Ti-doped Ta₂O₅ thin films (<10 nm) obtained by rf sputtering are studied with respect to their composition, dielectric and electrical properties. The incorporation of Ti is performed by two methods - a surface doping, where a thin Ti layer is deposited on the top of Ta₂O₅ and a bulk doping where the Ti layer is sandwiched between two layers of Ta₂O₅. The effect of the process parameters (the method and level of doping) on the elemental distribution in-depth of the films is investigated by the time of flight secondary ion mass spectroscopy (ToF-SIMS). The Ti and Ta₂O₅ are intermixed throughout the whole thickness but the layers are very inhomogeneous. Two sub-layers exist in all the samples — a near interfacial region which is a mixture of Ta-, Ti-, Si-oxides as well as TaSiO, and an upper Ti-doped Ta₂O₅ sub-layer. For both methods of doping, Ti tends to pile-up at the Si interface. The electrical characterisation is performed on capacitors with Al- and Ru-gate electrodes. The two types of MIS structures exhibit distinctly different electrical behavior: the Ru gate provides higher dielectric permittivity while the stacks with Al electrode are better in terms of leakage currents. The specific metal-dielectric reactions and metal-induced electrically active defects for each metal electrode/high-k dielectric stack define its particular electrical behavior. It is demonstrated that the Ti doping of Ta₂O₅ is a way of remarkable improvement of leakage characteristics (the current reduction with more than four orders of magnitude as compared with undoped Ta₂O₅) of Ru-gated capacitors which originates from Ti induced suppression of the oxygen vacancy related defects.     

HfO2/AlGaN/GaN structures with HfO2 deposited at ultra low pressure using an e‐beam

We show that HfO₂/AlGaN/GaN structures with HfO₂ layer deposited using an e‐beam in ultra high vacuum are suitable for field effect transistors. The dielectric constant of the HfO₂ was found ε_HfO > 23–24, which is close to the highest re‐ ported values for this material. The leakage current did not exceed 10^–4 A/cm² at the threshold voltage. The comparison of the losses in the samples with and without HfO₂ indicates low concentration of the interface traps. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of initial surface reconstruction on the interface structure of HfO2/GaAs

We show that the bonding structures and electrical properties of the HfO₂/GaAs interface can be controlled by a choice of the reconstruction on the initial GaAs surface. Electron-beam evaporation of HfO₂ onto the c(4 × 4) surface yielded As-O bonds at the interface, while Ga-O bonds were dominant at the interfaces formed on the (2 × 4) and (4 × 6) surfaces. Influences of the initial surface reconstruction on the interface structure persisted even after annealing at 673 K. Electrical characterization of Ir/HfO₂/GaAs capacitors indicated that the interfacial As-O bonds cause weak Fermi level pinning. It was also suggested that the interfaces dominated by the Ga-O bonds have trapping states in the upper half of the GaAs bandgap.     

Growth and thermal stability of epitaxial BiFeO3 thin films

We have investigated the oxygen pressure and the temperature dependence on BiFeO₃ thin films deposited on SrTiO₃ substrates by pulsed laser deposition. Reflection high energy electron diffraction (RHEED), atomic force microscopy (AFM) and X-ray diffraction measurements indicate that high-quality epitaxial thin films are obtained for and T=650 °C. Outside of this pressure-temperature window, parasitic peaks attributed to β-Bi₂O₃ appear. We find an increase of the out-of-plane lattice parameter with oxygen pressure that we ascribe to Bi-deficiency due to its high volatility at low pressure. Ex-situ anneals have been performed and results show that as-grown single-phase BiFeO₃ thin films degrade after annealing, whereas as-grown BiFeO₃ containing impurity phases evolve toward a single-phase structure. These experiments demonstrate that parasitic phases can stabilize compounds which are usually unstable in air at elevated temperatures.     

Characterization of HfOxNy gate dielectrics using a hafnium oxide as target

Hafnium oxynitride (HfO_xN_y) gate dielectric has been deposited on Si (1 0 0) by means of radio frequency (rf) reactive sputtering using directly a HfO₂ target in N₂/Ar ambient. The thermal stability and microstructural characteristics for the HfO_xN_y films have been investigated. XPS results confirmed that nitrogen was successfully incorporated into the HfO₂ films. XRD analyses showed that the HfO_xN_y films remain amorphous after 800 °C annealing in N₂ ambient. Meanwhile the HfO_xN_y films can also effectively suppress oxygen diffusion during high temperature annealing and prevent interface layer from forming between HfO_xN_y films and Si substrates. AFM measurements demonstrated that surface roughness of the HfO_xN_y films increase slightly as compared to those pure HfO₂ films after post deposition annealing. By virtue of building reasonable model structure, the optical properties of the HfO_xN_y films have been discussed in detail.