Adsorption structure of phenylphosphonic acid on an alumina surface

The adsorption structure of phenylphosphonic acid (PPOA) on an alumina surface was investigated as a function of exposure and temperature using infrared reflected absorption spectroscopy (IRAS) and a Kelvin probe. The alumina surface was held at room temperature during deposition. At monolayer adsorption, PO and Phenyl-P bands are observed, which indicate the creation of POAl bonds. The aromatic ring plane is positioned perpendicular to the surface, i.e. deprotonated PPOA stands vertically on the surface. At multilayer adsorption, PO and POH bands appear in the spectra. The multilayer PPOA film starts to desorb at 400 K. From 400 to 700 K, the IRAS spectra are similar to the monolayer spectrum, indicating that the multilayer structure reverses to the monolayer-like PPOA adlayer by heating. The acid molecules start to desorb at 700 K.     

Adsorption of Al on the Si(0 0 1) surface

The first-principles calculations have been presented to study the adsorption of aluminum (Al) on the Si(0 0 1)(2×1) surface. We have investigated the optimized geometries and electronic structures of the adatom-substrate system. The adsorption energy of the system has been calculated. The most stable adsorption sites were consequently determined to be HH site and T3+T4. It is shown that the Si-Si dimer is asymmetric on the reconstructed bare surface and become symmetric upon Al adsorption. In addition, the bond length of Si-Si was found to be considerably elongated in the adsorption system. It is found that the work function change obtained in our work is different from other previous results on the adsorption of alkali metals on the Si(0 0 1) surface. In order to investigate the relative stability of phases at different coverages, the surface formation energy of the adsorption system was calculated. To shed light on the nature of the Al-Si bond and the character of silicon surface, the density of states (DOS) and difference charge density of the system were evaluated.     

Study of the surface structure of Si(1 1 1)-6 × 1(3 × 1)-Ag using X-ray crystal truncation rod scattering

The structure of the Si(1 1 1)-6 × 1-Ag surface is investigated using crystal truncation rod (CTR) scattering along 00 rod. For the measurement, we developed a manipulator suitable for observing CTR scattering at large momentum transfer perpendicular to the surface. The heights of the silver and reconstructed silicon atoms from the substrate were determined. We also compared the obtained positions with those of the Si(1 1 1)-√3 × √3-Ag surface and found that the heights of those reconstructed atoms are almost the same.     

First-principles calculations of ethanethiol adsorption and decomposition on GaN (0 0 0 1) surface

The adsorption and decomposition of ethanethiol on GaN (0 0 0 1) surface have been investigated with first-principles calculations. The DFT calculations reveal that ethanethiol adsorbs dissociatively on the clean GaN (0 0 0 1) surface to form ethanethiolate and hydrogen species. An up limit coverage of 0.33 for ethanethiolate monolayer on GaN (0 0 0 1) surface is obtained and the position of the sulfur atom and the tilt angle of the thiolate chain are found to be very sensitive to the surface coverage. Furthermore, the reactivity of ethanethiol adsorption and further thermal decomposition reactions on GaN (0 0 0 1) surface is discussed by calculating the possible reaction pathways and ethene is found to be the major product.     

Fabrication and scanning tunneling microscopy studies of the Si(1 1 1)-(√31 × √31)-In surface

We report on the fabrication of single phase of the Si(1 1 1)-(√31 × √31)-In reconstruction surface, observed by scanning tunneling microscopy (STM) at room temperature. By depositing specific amounts of indium atoms while heating the Si(1 1 1)-(7 × 7) substrate at a critical temperature, the single phase of Si(1 1 1)-(√31 × √31)-In surfaces could be routinely obtained over the whole surface with large domains. This procedure is certified by our high-resolution STM images in the range of 5-700 nm. Besides, the high resolution STM images of the Si(1 1 1)-(√31 × √31)-In surface were also presented.     

Ruthenium adsorption and diffusion on the GaN(0 0 0 1) surface

We report first principles calculations to analyze the ruthenium adsorption and diffusion on GaN(0 0 0 1) surface in a 2×2geometry. The calculations were performed using the generalized gradient approximation (GGA) with ultrasoft pseudopotential within the density functional theory (DFT). The surface is modeled using the repeated slabs approach. To study the most favorable ruthenium adsorption model we considered T₁, T₄ and H₃ special sites. We find that the most energetically favorable structure corresponds to the Ru- T₄ model or the ruthenium adatom located at the T₄ site, while the ruthenium adsorption on top of a gallium atom (T₁ position) is totally unfavorable. The ruthenium diffusion on surface shows an energy barrier of 0.612 eV. The resultant reconstruction of the ruthenium adsorption on GaN(0 0 0 1)- 2×2 surface presents a lateral relaxation of some hundredth of Å in the most stable site. The comparison of the density of states and band structure of the GaN(0 0 0 1) surface without ruthenium adatom and with ruthenium adatom is analyzed in detail.     

SR-PES and STM observation of metastable chemisorption state of oxygen on Si(1 1 0)-16 × 2 surface

Initial adsorption of oxygen molecules on the Si(1 1 0)-16 × 2 surface and subsequent modification of the bonding states induced by mild (300 °C) annealing have been studied by synchrotron-radiation photoemission spectroscopy and scanning-tunneling microscopy. It has been shown that upon annealing, the intensity and the energy positions of the Si 2p suboxide components shift towards the values characteristic for the thermal oxide. This indicates the presence of a metastable chemisorption state of oxygen on the Si(1 1 0)-16 × 2 surface.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

Monolayer adsorption of water on NaCl(1 0 0)

Density functional theory calculations have been applied to investigate the adsorption geometry of water overlayers on the NaCl(1 0 0) surface in the monolayer regime. Competition between H-H intermolecular repulsion and the attraction of the polar molecules to the surface ions results in the most stable structure having a 2 × 1 adsorption symmetry with an adsorption energy of 415 meV. Overlayers of 1 × 1 symmetry, as observed in experiment, have slightly lower adsorption energies. The layers are also unstable with respect to rotation of individual molecules. Multiple hydrogens/oxygens interacting with a single substrate ion can pull that ion out of the surface, although the examples considered are energetically very unfavourable. Overlayers of 1 × 1 symmetry with a coverage of one water molecule per NaCl do not have a high enough adsorption energy to wet the surface.     

Anisotropic diffusion of Cu adatoms on strained Cu (1 1 1) surface

Diffusion of Cu atoms on a strained Cu (1 1 1) surface was studied by molecular dynamic simulation using an EAM potential. The anisotropic diffusion behaviour is found when the uniaxial strain is imposed on the surface, which does not exist under the biaxial strain. The migration of the adatom is suppressed along the tensile strain direction. The results suggest that different island morphology can be obtained by controlling anisotropic diffusion of adatoms on the strained surfaces during film growth.     

The structural formation of methylthiolate SAMs on Au(1 1 1) for short deposition times from solution

Scanning tunnelling microscopy was used to investigate the structural formation of methylthiolate self-assembled monolayers on Au(1 1 1). SAMs were prepared by exposing the gold crystal to an ethanol-dimethyldisulfide solution for immersion times of 12 min, 12 h, and 24 h. After preparation the formation of a () rect. striped phase was found. For this phase, the immersion time is the key parameter determining the size and number of ordered domains. Annealing induced a phase transition leading to large domains in a (3×4) structure. The annealing temperature determines whether a mixed phase of both structures or only the (3×4) structure are formed. We find no influence of the immersion time on the formation of the second structure. A structure model is presented for both phases on the basis on the same building block containing two methylthiolate molecules and a gold ad-atom.     

HREELS study of the adsorption and evolution of diethylamine (DEA) on Si(1 0 0) surfaces

The adsorption of diethylamine (DEA) on Si(1 0 0) at 100 K was investigated using high-resolution electron energy loss spectroscopy (HREELS) and electron stimulated desorption (ESD). The thermal evolution of DEA on Si(1 0 0) was studied using temperature programmed desorption (TPD). Our results demonstrate DEA bonds datively to the Si(1 0 0) surface with no dissociation at 100 K. Thermal desorption of DEA takes place via a β-hydride elimination process leaving virtually no carbon behind. Electronic processing of DEA/Si(1 0 0) at 100 K results in desorption of ethyl groups; however, carbon and nitrogen are deposited on the surface as a result of electron irradiation. Thermal removal of carbon and nitrogen was not possible, indicating the formation of silicon carbide and silicon nitride.     

Hydrogen-induced metallization on Ge(1 1 1) c(2 × 8)

We have studied hydrogen adsorption on the Ge(1 1 1) c(2 × 8) surface using scanning tunneling microscopy (STM) and angle-resolved photoelectron spectroscopy (ARPES). We find that atomic hydrogen preferentially adsorbs on rest atom sites. The neighbouring adatoms appear higher in STM images, which clearly indicates a charge transfer from the rest atom states to the adatom states. The surface states near the Fermi-level have been followed by ARPES as function of H exposure. Initially, there is strong emission from the rest atom states but no emission at the Fermi-level which confirms the semiconducting character of the c(2 × 8) surface. With increasing H exposure a structure develops in the close vicinity of the Fermi-level. The energy position clearly indicates a metallic character of the H-adsorbed surface. Since the only change in the STM images is the increased brightness of the adatoms neighbouring a H-terminated rest atom, we identify the emission at the Fermi-level with these adatom states.     

Barrier height imaging of Si(1 1 1)3 × 1-Ag reconstructed surfaces

We investigated the bias voltage polarity dependence of atomically resolved barrier height (BH) images on Si(1 1 1)3 × 1-Ag surfaces. The BH images were very similar to scanning tunneling microscopy (STM) images in both the empty and filled states. This similarity strongly supports the interpretation that the BH image reflects the vertical decay rate of the surface local density of states (LDOS). Differences in contrast and protrusion shapes between BH and STM images were observed. We attributed these differences to the geometric contribution to the STM image and to the improved spatial resolution of the BH image due to the lock-in technique.     

Comparative study of H2 adsorption on W(1 0 0)-c(2 × 2)Cu and W(1 0 0): Surface alloying effects

The interactions of H and H₂ with W(1 0 0)-c(2 × 2)Cu and W(1 0 0) have been investigated through density functional theory (DFT) calculations to elucidate the effect of Cu atoms on the reactivity of the alloy. Cu atoms do not alter the attraction towards top-W sites felt by H₂ molecules approaching the W(1 0 0) surface but make dissociation more difficult due to the rise of late activation barriers. This is mainly due to the strong decrease in the stability of the atomic adsorbed state on bridge sites, the most favourable ones for H adsorption on W(1 0 0). Still, our results show unambiguously that H₂ dissociative adsorption on perfect terraces of the W(1 0 0)-c(2 × 2)Cu surface is a non-activated process which is consistent with the high sticking probability found in molecular beam experiments at low energies.     

Adsorption, reaction and desorption of hydrogen on modified Pd(1 1 1) surfaces

The interaction of hydrogen (deuterium) with different modified Pd(1 1 1) surfaces has been investigated. The focus was put on the energy and angel dependence of the desorbing molecules from oxygen covered, potassium covered and vanadium oxide covered surfaces. Conventional adsorption/desorption as well as permeation/desorption experiments were performed. For the oxygen covered surface optimum reaction rates for water production and the energy distribution of the reaction products were determined, both for the reaction of oxygen with molecular hydrogen as well as with atomic hydrogen. Potassium on the surface enhances the activation barrier for hydrogen adsorption resulting in a hyper-thermal desorption flux and a forward focused angular distribution of desorption. Permeation/desorption of deuterium from ultra-thin vanadium oxide films yield mainly thermalized desorbing molecules or slightly hyper-thermal, depending on the oxidation state of the surface oxide.     

Effect of S adsorption on magnetic Co(0001) surface: a DFT study

Extended density functional theory calculations with the spin interpolation formula of Vosko, Wilk, and Nusair (VWN) are employed to study the effect of atomic S adsorption on Co(0001) surface. Besides the site preference for atom S in fcc-hollow site and adsorption geometry structures are in good agreement with experiments and previous calculations, some differences are also reported for the geometry of S in hcp-hollow site. Moreover, vibrational frequency, magnetic moments and electronic structure analysis are presented in more detail.     

Monolayer passivation of silicon(0 0 1) surface by selenium

Monolayer passivation of the silicon(0 0 1) surface by selenium is investigated in an ultrahigh vacuum environment with a solid selenium source by reflection high-energy electron diffraction and residual gas analysis. It is found that precisely one monolayer of selenium is deposited on silicon(0 0 1) when the silicon substrate temperature is set slightly above the selenium source temperature and the passivation time ensures a little overdose of selenium above one monolayer. The temperature settings prevent selenium condensation on silicon(0 0 1), which makes selenium deposition on silicon(0 0 1) a thermodynamically self-limited process to exactly one monolayer.     

Pd adsorption on Si(1 1 3) surface: STM and XPS study

Pd-induced surface structures on Si(1 1 3) have been studied by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). In the initial process of the Pd adsorption below 0.10 ML, Pd silicide (Pd₂Si) clusters are observed to form randomly on the surface. By increasing the Pd coverage to 0.10 ML, the clusters cover the entire surface, and an amorphous layer is formed. After annealing the Si(1 1 3)-Pd surface at 600 °C, various types of islands and chain protrusions appears. The agglomeration, coalescence and crystallization of these islands are observed by using high temperature (HT-) STM. It is also found by XPS that the islands correspond to Pd₂Si structure. On the basis of these results, evolution of Pd-induced structures at high temperatures is in detail discussed.