Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

Study on humidity sensitive property of K2CO3-SBA-15 composites

K₂CO₃-SBA-15 with different K₂CO₃ content was prepared by thermal dispersion. The structures of resultant powders were characterized by XRD, N₂ adsorption and IR. The humidity sensing properties of the powders were also investigated. Compared with pure SBA-15, K₂CO₃-SBA-15 shows improved humidity sensing properties and the introducing level of K₂CO₃ has a great influence on the humid sensitivity of K₂CO₃-SBA-15 composites. The optimal mixing ratio was K₂CO₃-SBA-15 (0.8 g/g), which exhibited excellent linearity in the whole range of 11–95%RH, a resistance variation of about five orders of magnitude, and a rapid response time and recovery time about 15 and 50 s, respectively. The mechanism of the humidity sensitive properties was also discussed.     

Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption

Mesoporous SBA-15 was synthesized using rice husk ash (RHA) as the silica source and their defective Si-OH groups were grafted with tris(2-aminoethyl) amine (TREN) dendrimers generation through step-wise growth technique. The X-ray diffraction (XRD) and nitrogen adsorption/desorption results of parent SBA-15 obtained from RHA, suggests its resemblance with SBA-15 synthesized using conventional silica sources. Furthermore, the nitrogen adsorption/desorption results of SBA-15/TREN dendrimer generations (G1-G3) illustrates the growth of dendrimer inside the mesopores of SBA-15 and their CO₂ adsorption capacity was determined at 25 °C. The maximum CO₂ adsorption capacity of 5-6 and 7-8 wt% over second and third dendrimer generation was observed which is discernibly higher than the reported melamine and PAMAM dendrimers. The experimental CO₂ adsorption capacity was found to be less than theoretically calculated CO₂ adsorption capacity due to inter and intra molecular amidation as result of steric hindrance during the dendrimer growth. These SBA-15/TREN dendrimer generations also exhibit thermal stability up to 350 °C and CO₂ adsorption capacity remains unaltered upon seven consecutive runs.     

CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15

Adsorption of pure CO₂ on SBA-15 impregnated with branched polyethyleneimine (PEI) has been studied. Materials were prepared by impregnating the pore surface of SBA-15 mesoporous silica with different amounts of branched PEI (10, 30, 50 and 70 wt%). Textural properties, elemental analysis and low angle XRD measurements of the prepared samples showed a progressive pore filling of SBA-15 as PEI loading was increased. Pure CO₂ adsorption isotherms on these modified SBA-15 materials were obtained at 45 °C, showing high adsorption efficiency for CO₂ removal at 1 bar. Chemisorption of CO₂ on amino sites of the modified SBA-15 seems to be the main adsorption mechanism. PEI content of impregnated SBA-15 influences the adsorption capacity of the material, being a relevant variable for CO₂ removal by adsorption. Temperature effect on adsorption was also studied in the range 25-75 °C, showing that temperature strongly influences CO₂ adsorption capacity. Adsorption capacity was also tested after regeneration of the PEI-impregnated SBA-15 materials. Our results show that these branched PEI-impregnated materials are very efficient even at low pressure and after several adsorption-regeneration cycles.     

Neutron powder diffraction and magnetic studies of mesoporous Co3O4

Samples of mesoporous Co₃O₄, created by using mesoporous silicas KIT-6 and SBA-16 as hard templates to control the growth of Co₃O₄ have been investigated with SQUID magnetometry and neutron powder diffraction, to reveal the effects of high surface area on the magnetic and electronic properties. DC magnetic susceptibility measurements show lower Néel ordering temperatures and lower magnetic moments than in a “bulk” reference. A lower second transition temperature is also observed in the mesoporous samples, associated with the freezing of the surface (shell) magnetic moments. Measurements taken with increasing applied field at constant temperature show the materials to be antiferromagnetic as expected. Complementary parametric neutron powder diffraction studies show similar trends between the two mesoporous samples when looking at their Néel temperatures, and verify long range order within the samples.     

Adsorption of octadecyltrichlorosilane on mesoporous SBA-15

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m²/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH₃) and methylene (-CH₂) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 °C and that the OTS monolayers decompose between 230 and 400 °C.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Studies on ordered mesoporous materials for potential environmental and clean energy applications

Two series of ordered mesoporous materials, SBA-15 silica and CMK-3 carbon were synthesized. The ordered nanostructure of these materials was confirmed by TEM and XRD analysis. Structural parameters including the specific surface area, pore volume and pore size distribution were determined on the basis of nitrogen adsorption data at 77 K. Potential applications of these materials were explored in relation to the CO₂ sequestering, methane storage and fuel desulfurization. Initial studies of both materials showed their usefulness for environmental and clean energy applications. SBA-15 modified with triethanolamine showed a very good adsorption selectivity for CO₂ while its adsorption reversibility was retained. Also, this material after CuCl deposition was useful for removal of fuel thiophenes. However, CMK-3 was shown to be promising material for storage of natural gas. As high as 41 wt.% of methane was stored in this material in the presence of appropriate amount of water.     

One-step synthesis of hydrophobic mesoporous silica and its application in nonylphenol adsorption

Highly CH₃-functionalized mesoporous silica with nearly spherical morphology was synthesized under acidic conditions by co-condensation of two different silica precursors polymethylhydrosiloxane (PMHS) and tetraethoxysilane (TEOS) in the presence of triblock copolymer P123 as template. XRD, N₂ adsorption–desorption, HRTEM, SEM and ²⁹Si MAS NMR were used to identify its highly-ordered mesopore array structure, nearly spherical particle morphology and CH₃ functionalization of the as-synthesized material. The resulting hydrophobic mesoporous silica possessed regular mesochannel arrays, indicating that the introduction of PMHS had little impact on the formation of an ordered mesostructure. Also, PMHS played an important role in morphology control and organic functionalization, ensuring nearly spherical particle morphology and high CH₃ functionalization degree of the obtained mesoporous silica material. As compared with pristine mesoporous silica SBA-15, the hydrophobic mesoporous silica showed the higher adsorption performance when they were used as adsorbents to remove organic pollutant nonylphenol at a very low concentration from aqueous solution.     

Characterization and adsorptive application of ordered mesoporous silicas

The adsorption behaviour of the n-octane/ethanol binary liquid mixture has been studied on ordered mesoporous silica materials. Adsorption excesses on SBA-15, SBA-16 and MCM-48 solids are measured and described by mathematical functions. The experimental adsorption excess isotherms are presented and discussed. The mesoporous silicas used for liquid-adsorption experiments are characterized by nitrogen adsorption before and after liquid adsorption by the powder X-ray diffraction (XRD) and by the sample controlled thermal analysis (SCTA).     

Preparation and luminescence of (SBA-15)–Eu2O3 composite materials

In this study, (SBA-15)–Eu₂O₃ host-guest composites have been prepared with SBA-15 mesoporous sieve as host and Eu₂O₃ as guest via the solid-phase ultrasonic method and liquid-phase medium ultrasonic method. The host–guest composite materials showed the properties of luminescence. Four excitation peaks appeared in the excitation spectra of the samples. The excitation peaks are located at 397, 415, 466, 537 nm; 392, 408, 464, 532 nm and 393, 406, 465, 533 nm for the nano-Eu₂O₃, the liquid-phase medium ultrasonic method (LPMUM) and the solid-phase ultrasonic method (SPUM) samples, respectively. SBA-15 has the well-ordered hexagonal arrays of mesopores, which makes centrosymmetry of Eu³⁺ higher in the prepared (SBA-15)–Eu₂O₃ samples. The intensity of ⁵D₀→⁷F₁ transition strengthens, and the intensity of ⁵D₀→⁷F₂ transition weakens.     

A fluorescent probe for zinc detection based on organically functionalized SBA-15

In this study, highly ordered mesoporous silica material (SBA-15) functionalized with N-(quinoline-8-yl)-2-(3-triethoxysilyl-propylamino)-acetamide (QTPA) as zinc probe has been reported. The anchoring to the surface of the SBA-15 was carried out by the reaction between the precursor and the hydroxyl groups available on the inner surface of the support. The primary ordered mesoporous structure of SBA-15 was well preserved after the grafting procedure. Fluorescence characterization showed that the obtained organic-inorganic hybrid composite displayed highly selective and sensitive to Zn²⁺ ion over other cations such as Cd²⁺, Pb²⁺, Ni²⁺ and Co²⁺. And the hybrid material has ideal chemical and spectroscopic properties for further biological and environmental applications.     

Vanadium phosphates on mesoporous supports: model catalysts for solid-state NMR studies of the selective oxidation of n-butane

SBA-15 was utilized as mesoporous support for the dispersion of vanadium phosphate (VPO) compounds. Loading of SBA-15 with VPO compounds was found to be accompanied by decreasing ²⁹Si MAS NMR signals of Q² (Si(2Si,2OH)) and Q³ (Si(3Si,1OH)) silicon species, which indicates coverage of the mesoporous support by the guest compounds. The ⁵¹V MAS NNR spectra of the activated VPO/SBA-15 catalysts consist of patterns typical for the α_II- and β-phases of vanadyl orthophosphate. In the ³¹P MAS NMR spectra of the activated VPO/SBA-15 catalysts, signals of β-, δ-, and α_II-VOPO₄ phases could be identified. Upon conversion of n-butane-¹³C₄, a strong decrease of the ³¹P MAS NMR signals characteristic for the δ-VOPO₄ phase occurred, while by ¹³C MAS NMR spectroscopy the formation of maleic anhydride, carbon monoxide, and carbon dioxide was observed. This finding supports the active role of the δ-VOPO₄ phase in the selective oxidation of n-butane on VPO/SBA-15 catalysts.     

Adsorption of SO2 on Li atoms deposited on MgO (1 0 0) surface: DFT calculations

The adsorption of sulfur dioxide molecule (SO₂) on Li atom deposited on the surfaces of metal oxide MgO (1 0 0) on both anionic and defect (F_s-center) sites located on various geometrical defects (terrace, edge and corner) has been studied using density functional theory (DFT) in combination with embedded cluster model. The adsorption energy (E_ads) of SO₂ molecule (S-atom down as well as O-atom down) in different positions on both of O⁻² and F_s sites is considered. The spin density (SD) distribution due to the presence of Li atom is discussed. The geometrical optimizations have been done for the additive materials and MgO substrate surfaces (terrace, edge and corner). The oxygen vacancy formation energies have been evaluated for MgO substrate surfaces. The ionization potential (IP) for defect free and defect containing of the MgO surfaces has been calculated. The adsorption properties of SO₂ are analyzed in terms of the E_ads, the electron donation (basicity), the elongation of S-O bond length and the atomic charges on adsorbed materials. The presence of the Li atom increases the catalytic effect of the anionic O⁻² site of MgO substrate surfaces (converted from physisorption to chemisorption). On the other hand, the presence of the Li atom decreases the catalytic effect of the F_s-site of MgO substrate surfaces. Generally, the SO₂ molecule is strongly adsorbed (chemisorption) on the MgO substrate surfaces containing F_s-center.     

Optical oxygen sensing materials based on a novel dirhenium(I) complex assembled in mesoporous silica

A new dirhenium(I) complex fac-[{Re(CO)₃(4,7-dinonadecyl-1,10-phenanthro -line)}₂ (4,4′-bipyridyl)] (trifluoromethanesulfonate)₂ (denoted as D-Re(I) ) is assembled in MCM-41 and SBA-15 type mesoporous silica support. The emission peaks of D-Re(I) in D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are observed at 522 and 517 nm, respectively. Their long excited lifetimes, which are of the order of microseconds, indicate the presence of phosphorescence emission arising from the metal to ligand charge-transfer (MLCT) transition. The luminescence intensities of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 decrease remarkably with increase in the oxygen concentration, meaning that they can be used as optical oxygen sensing materials based on luminescence quenching. The ratios I₀/I₁₀₀ of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are estimated to be 5.6 and 20.1, respectively. The obtained Stern-Volmer oxygen quenching plots of the mesoporous sensing materials could be fitted well to the two-site Demas model and Lehrer model.     

Synthesis and characterisation of Gd-doped mesoporous TiO2 materials

Using multi-walled carbon nano-tubes (MWNTs) as the template, Gd³⁺-doped mesoporous TiO₂ (M-TiO₂) material was prepared by the homogeneous precipitation-assisted template method. The as-prepared photo-catalysts were characterised using X-ray diffraction, scanning electron microscopy, nitrogen adsorption/desorption and ultraviolet-visible (UV-vis) diffuse-reflection spectroscopy analyses. The photo-catalytic properties of Gd³⁺-doped M-TiO₂ were primarily investigated by the photo-degradation of methyl orange under Xe-lamp irradiation and compared with those of pure M-TiO₂ and the commercial photo-catalyst Degussa P25. The results showed that the as-synthesised samples were of anatase crystalline phase and had red shifts in their UV-vis patterns with different Gd³⁺-doping concentrations. Gd³⁺-adding at 0.12 mol% could significantly enhance the photo-catalytic properties of the M-TiO₂ material and the rate of photo-degradation of methyl orange reached 97.3% under Xe-lamp irradiation for 150 min.     

H2S-sensing properties of Pt-doped mesoporous indium oxide

Pt-doped mesoporous indium oxide (In₂O₃) has been successfully obtained by a simple and effective in situ nanocasting method. The resultant samples were characterized by XRD, FE-SEM, TEM, N₂ physisorption, XPS and EDX. The gas sensing properties for hydrogen sulfide (H₂S) of the Pt-doped mesoporous In₂O₃ specimens were also examined. The results exhibit those In₂O₃ specimens possess much higher response to H₂S even at low concentration of 2 ppm and a lower optimum working temperature of 150 °C. A possible mechanism was also provided to explain the improvement of the sensing properties.     

Properties of SBA-15 modified by iron nanoparticles as potential hydrogen adsorbents and sensors

SBA-15-Fe was synthesized via the incorporation of Fe⁰ nanoparticles (Fe(0)-Nps) in the mesoporous channels. Electron microscopy and X-ray diffraction showed that dispersion of fine iron NPs occurs mainly inside the channels of SBA-15, producing a slight structure compaction. This was accompanied by a significant improvement of both the affinity towards hydrogen and electrical conductivity, as supported by hydrogen adsorption tests and impedance measurements. CO₂ thermal programmed desorption measurements revealed an attenuation of the acid character of the solid surface. This was explained in terms of strong iron interaction with the lattice oxygen atoms that reduces the SiO–H bond polarity. The close vicinity of fine Fe(0)-Nps combined with the large pore size of SBA-15 appear to contribute to a synergistic improvement of the electrical conductivity. The results reported herein open new prospects for SBA-15 as potential adsorbents for hydrogen storage and carriers for hydrogen sensors. The use of iron in lieu of noble metals for designing such materials is a novelty, because such applications of iron-loaded silica have not been envisaged so far due to the high reactivity of iron towards air and water. The development of such technologies, if any, should address this issue.     

Analysis of adsorption properties of N719 dye molecules on nanoporous TiO2 surface for dye-sensitized solar cell

Ordered nanoporous TiO₂ materials (MK-TiO₂, MS-TiO₂, and MU-TiO₂) were synthesized for the dye-sensitized solar cell (DSSC) by using different silica templates such as KIT-6, SBA-15, and MSU-H. To prepare a photoelectrode in DSSC, cis-bis(isothiocyanato)bis(2,2′-bipyridyl-4,4′-dicarboxylato)-ruthenium(II)bis-tetrabutylammonium dye (N719) was adsorbed onto the synthesized nanoporous TiO₂ materials. The samples were characterized by XRD, TEM, FE-SEM, AFM, and N₂ adsorption analyses. The photovoltaic performance of DSSC was evaluated from the overall conversion efficiency, fill factor, open-circuit voltage, and short-circuit current from the I-V curves measured. It was found that the photoelectric performance is highly dependent on the adsorption properties of N719 dye molecules on the nanoporous TiO₂ replicas (MK-TiO₂, MS-TiO₂, and MU-TiO₂) synthesized from different silica templates.