Superspin glass state in MnFe2O4 nanoparticles

Nanosized MnFe₂O₄ ferrites were synthesized by a simple method, which is based on the solid state ball-milling and calcinations of nitrate precursors and citric acid. The samples were characterized by using different methods. The results indicate that the products mainly consist of MnFe₂O₄ nanoparticles. The effect of different annealing temperatures on particle sizes and crystallinity of the samples was also studied. By increasing the particle size, the coercivity and magnetization of the samples increase. The increase of magnetization by increasing the crystallite size could be attributed to the lower surface spin canting and surface spin disorder of the larger magnetic nanoparticles. Our analysis of ac susceptibility measurements shows that the interparticle magnetic interaction leads to the superspin glass-like behavior in these nanoparticle samples.     

Electrophoretic deposition of BaTiO3/CoFe2O4 multiferroic composite films

Electrophoretic deposition was utilized for preparation of BaTiO₃/CoFe₂O₄ multiferroic composite thick films on indium-tin oxide substrates. The suspensions for electrophoretic experiments were prepared by dispersing BaTiO₃ and CoFe₂O₄ nanoparticles with different molar ratios into solvents composed of ethanol and acetylacetone. Polyvinyl butyral was added to the suspensions in order to enhance the adhesion and strength of deposit and prevent cracking. The zeta potential values of BaTiO₃/CoFe₂O₄ suspensions were measured to be 26.4-36.9 mV. The experiment results showed that deposited films were obtained only when the applied electric field was larger than a certain critical value. XRD and SEM analysis depicted the presence of constituent phases in composite films. The percolation threshold of composite films was improved through dispersing ferromagnetic phase into ferroelectric phase. Therefore, the ferroelectric properties of composite thick films were maintained when the ferromagnetic properties were enhanced significantly with increasing CFO content.     

Synthesis and characterization of CoFe2O4 octahedrons via an EDTA-assisted route

Octahedral-like CoFe₂O₄ ferrite was fabricated using an ethylenediaminetetraacetic acid (EDTA)-assisted route under mild conditions. EDTA plays important roles in the formation of the products in the process. Also, the magnetic properties of the samples were characterized on a vibrating sample magnetometer (VSM).     

Magnetic structure and physical properties of the multiferroic compound PrMn2O5

RMn₂O₅ (R=lanthanide, Bi, Y) multiferroic compounds are intensively studied for their potential application in the spintronic field. In these systems, the key issue is to understand the origin of the strong coupling between the ferroelectric and magnetic orders and to investigate the influence of the nature of the R ions in this coupling. While the phase diagram of RMn₂O₅ compounds with small R size is well established, this of large R size compounds is missing due to the lack of samples originating with difficulties of synthesis. We present in this paper the first investigation of the thermodynamic, structural and magnetic properties of high quality polycrystalline PrMn₂O₅ samples. Our work shows that PrMn₂O₅ presents two magnetic transitions corresponding to commensurate magnetic orderings. We also evidence a weak lattice effect coupled to the magnetic order. Our results point out that the physical properties of PrMn₂O₅ differ from those of the parent compounds with magnetic R ions.     

Dielectric properties of BaTiO3-CoFe2O4 nanocomposite thin films

We report on the dielectric characterization of CoFe₂O₄-BaTiO₃ nanocomposites grown by rf sputtering. Dielectric properties have been analyzed for samples grown at different deposition temperatures and with different thicknesses. Impedance spectroscopy data has been analyzed by fitting to an equivalent circuit and different contributions have been identified. Correlations between dielectric properties and deposition temperature and thickness have been established.     

Phase transition in multiferroic YMnO3 and its solid solution YMn(0.93)Fe(0.07)O3

Ceramics of YMnO₃ and its Fe substituted YMn_(0.93)Fe_(0.07)O₃ solid solution were synthesized by solid state reaction of the oxides at 1200 °C. Hexagonal phase was identified in both cases by X-ray powder diffraction. Rietveld refinement of cell parameters showed an increase of the parameter values for the solid solution. Dielectric permittivity measurements versus temperature showed a phase transition at 655 °C for yttrium manganite, however, for the solid solution no phase transition was detected on heating up to 700 °C. Dielectric loss measurements showed higher slope changes and better defined local maxima for the solid solution than for the pure phase.     

Synthesis and characterization of single-crystalline MnFe2O4 nanorods via a surfactant-free hydrothermal route

Uniform, high-quality, single-crystalline MnFe₂O₄ nanorods with diameter around 25 nm and length up to 500 nm, have been reproducibly synthesized via a surfactant-free hydrothermal route. The growth direction of the obtained nanowires was determined to be its [1 1 1] direction, resulting in the increase of saturation magnetization. Mn²⁺ is responsible for one-dimensional growth of the nanorods, and the effects of reaction time and solution concentration on the morphology and crystallization of the MnFe₂O₄ nanorods were investigated. Saturation magnetization of the nanorods is 74.0 emu/g, which is among the best value reported so far.     

Magnetodielectric coupling in MnCr2O4 spinel

We have investigated the magnetic and dielectric properties of polycrystalline samples of the spinel MnCr₂O₄. Below the ferrimagnetic ordering temperature at T_N∼43 K, both magnetization and dielectric measurements show signatures of the onset of a conical structure at T_s∼17 K and a lock-in temperature at T_f∼14 K. These values are similar to those previously reported for single-crystal samples, where the spiral structure is short-range ordered (SRO) at low temperatures. The application of magnetic field suppresses the dielectric anomaly at T_f indicating that the coherence length of the ordering increases. MnCr₂O₄ exhibits a symmetrical magnetodielectric response between T_f and T_s that scales with the square of the magnetization. This suggests that the magnetodielectric coupling originates from the P²M² term in the free energy expansion. The magnetodielectric response becomes asymmetric with respect to field below T_f.     

Electronic structure, magnetic and electrical properties of multiferroic PbFe1/2Ta1/2O3

Structural analysis of the synthesized lead iron tantalate, PbFe_1/2Ta_1/2O₃ (PFT) is performed by the refinement of the X-ray diffraction data at room temperature using the GSAS code. Energy dispersive X-ray spectrometry analysis is done to find out the chemical composition. The electronic structure of PFT is calculated by the first principles full potential linearized augmented plane wave method. The spin polarized density of states shows the insulating nature. The magnetic moment of 4.3 μB per Fe ion is obtained from the electronic structure calculation using the GGA+U method and compared with the available experimental data. The electronic structure of the PFT is verified by X-ray photoemission spectroscopy. The dielectric spectroscopy is applied to investigate the electrical properties of PFT in the frequency range from 100 Hz to 1 MHz and in the temperature range from 183 to 253 K. The frequency dependent electrical data are analyzed by conductivity formalism. The relaxation mechanism is explained using the Cole-Cole approach.     

Magnetic anisotropic properties in Fe3O4 and CoFe2O4 ferrite epitaxy thin films

Epitaxial thin films of Fe₃O₄ and CoFe₂O₄ on MgO (0 0 1) substrates were grown by molecular beam epitaxy at low temperature growth process. Magnetization and hysteresis loop of both films were measured to investigate magnetic anisotropic properties at various temperatures. Anomalous magnetic properties are found to be correlated with crystalline, shape, and stress anisotropies. The Fe₃O₄ film below Verwey structural transition has a change in crystal structure, thus causing many anomalous magnetic properties. Crystalline anisotropy and anomalous magnetic properties are affected substantially by Co ions. The saturation magnetization of Co–ferrite film becomes much lower than that of Fe₃O₄ film, being very different from the bulks. It indicates that the low temperature growth process could not provide enough energy to have the lowest energy state.     

Synthesis of Co-Cu-Zn doped Fe3O4 nanoparticles with tunable morphology and magnetic properties

Co-Cu-Zn doped Fe₃O₄ nanoparticles can be successfully synthesized using a simple method. The particles in the size range 20−400 nm with different regular shapes i.e. sphere-like, regular hexane and tetrahedron are controllably achieved by changing the metal ion concentration. Compared to pure Fe₃O₄ without dopants, Co-Cu-Zn doped Fe₃O₄ nanoparticles exhibit better microwave absorbing properties at 2−18 GHz. Among three Co-Cu-Zn doped Fe₃O₄ nanoparticles with different morphologies, tetrahedral Co-Cu-Zn doped Fe₃O₄ nanoparticles represent a better dielectric loss in high frequency range. This work is believed the first known report of Co-Cu-Zn doped Fe₃O₄ nanoparticles with tunable morphology and magnetic properties through the hydrothermal process without using any organic solvents, organic metal salts or surfactants.     

Exchange bias effect in multiferroic Eu0.75Y0.25MnO3

The exchange bias phenomenon has been investigated in multiferroic Eu_0.75Y_0.25MnO₃. The material shows a weak ferromagnetism with cone spin configuration induced by external magnetic field below 30 K. Consequently, the electric polarization coming from the cycloid spin order below 30 K can be suppressed by external magnetic fields. The magnetic hysteresis loops after cooling in a magnetic field exhibit characteristics of exchange bias below the spin glassy freezing temperature (T_g)∼16 K. The exchange bias field, coercivity field, and remanent magnetization increase with increasing cooling magnetic field. The exchange bias effect is ascribed to the frozen uncompensated spins at the antiferromagnetism/weak ferromagnetism interfaces in the spin-glass like phase.     

Structural, microstructural and magnetic properties of NiFe2O4, CoFe2O4 and MnFe2O4 nanoferrite thin films

The structural, microstructural and magnetic properties of nanoferrite NiFe₂O₄ (NF), CoFe₂O₄ (CF) and MnFe₂O₄ (MF) thin films have been studied. The coating solution of these ferrite films was prepared by a chemical synthesis route called sol-gel combined metallo-organic decomposition method. The solution was coated on Si substrate by spin coating and annealed at 700 °C for 3 h. X-ray diffraction pattern has been used to analyze the phase structure and lattice parameters. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used to show the nanostructural behavior of these ferrites. The values of average grain's size from SEM are 44, 60 and 74 nm, and from AFM are 46, 61 and 75 nm, respectively, measured for NF, CF and MF ferrites. At room temperature, the values of saturation magnetization, M_s∼50.60, 33.52 and 5.40 emu/cc, and remanent magnetization, M_r∼14.33, 15.50 and 1.10 emu/cc, respectively, are observed for NF, CF and MF. At low temperature measurements of 10 K, the anisotropy of ferromagnetism is observed in these ferrite films. The superparamagnetic/paramagnetic behavior is also confirmed by χ′(T) curves of AC susceptibility by applying DC magnetizing field of 3 Oe. The temperature dependent magnetization measurements show the magnetic phase transition temperature.     

Study of DC conductivity and relative magnetic permeability of nanoparticle NiZnFe2O4/PPy composites

The DC conductivity and the relative magnetic permeability have been measured as functions of temperature for five powder samples of nanoparticle ferrites (Ni_xZn_1−xFe₂O₄; x=0, 0.25, 0.5, 0.75 and 1), a pure polypyrrole (PPy) powder sample and many composite samples prepared by mixing different ratios of the ferrites to PPy. By comparing the results it is found that there is an obvious increase in DC conductivity of the ferrite/PPy composite samples compared to the corresponding pure ferrite samples, whereas compared to the pure PPy sample there is a decrease in DC conductivity. On the contrary, the magnetic permeability of the composites is higher than that of the pure PPy sample and lower than that of the pure ferrite samples as was expected.     

Tuning magnetic properties of magnetoelectric BiFeO3-NiFe2O4 nanostructures

Multifunctional thin film nanostructures containing soft magnetic materials such as nickel ferrite are interesting for potential applications in microwave signal processing because of the possibility to shrink the size of device architecture and limit device power consumption. An essential prerequisite to future applications of such a system is a firm understanding of its magnetic properties. We show that nanostructures composed of ferrimagnetic NiFe₂O₄ pillars in a multiferroic BiFeO₃ matrix can be tuned magnetically by altering the aspect ratio of the pillars by depositing films of varying thickness. Magnetic anisotropy is studied using ferromagnetic resonance, which shows that the uniaxial magnetic anisotropy in the growth direction changes sign upon increasing the film thickness. The magnitude of this anisotropy contribution can be explained via a combination of shape and magnetostatic effects, using the object-oriented micromagnetic framework (OOMMF). The key factors determining the magnetic properties of the films are shown to be the aspect ratio of individual pillars and magnetostatic interactions between neighboring pillars.     

Electrodeposition and characterization of Ni-Y2O3 composite

Nano-sized Y₂O₃ particles were codeposited with nickel by electrolytic plating from a nickel sulfate bath. The effects of the incorporated Y₂O₃ on the structure, morphology and mechanical properties (including microhardness, friction coefficient and wear resistant) of Ni-Y₂O₃ composite coatings were studied. It is observed that the addition of nano-sized Y₂O₃ particles shows apparent influence on the reduction potential and pH of the electrolyte. The incorporated Y₂O₃ increases from 1.56 wt.% to 4.4 wt.% by increasing the Y₂O₃ concentration in the plating bath from 20 to 80 g/l. XRD results reveal that the incorporated Y₂O₃ particles favour the crystal faces (2 0 0) and (2 2 0). SEM and AFM images demonstrate that the addition of Y₂O₃ particles causes a smooth and compact surface. The present study also shows that the codeposited Y₂O₃ particles in deposits decrease the friction coefficient and simultaneously reduce the wear weight loss. Ni-Y₂O₃ composite coatings reach their best microhardness and tribological properties at Y₂O₃ content 4.4 wt.% under the experiment conditions.     

Preparation and characterization of the electrodeposited Cr-Al2O3/SiC composite coating

To increase the SiC content in Cr-based coatings, Cr-Al₂O₃/SiC composite coatings were plated in Cr(VI) baths which contained Al₂O₃-coated SiC powders. The Al₂O₃-coated SiC composite particles were synthesized by calcining the precursor prepared by heterogeneous deposition method. The transmission electron microscopy analysis of the particles showed that the nano-SiC particle was packaged by alumina. The zeta potential of the particles collected from the bath was up to +23 mV, a favorable condition for the co-deposition of the particles and chromium. Pulse current was used during the electrodeposition. Scanning Electron Microscopy (SEM) indicated that the coating was compact and combined well with the substrate. Energy dispersive X-ray analysis of Cr-Al₂O₃/SiC coatings demonstrated that the concentration of SiC in the coating reached about 2.5 wt.%. The corrosion behavior of the composite coating was studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The data obtained suggested that the Al₂O₃/SiC particles significantly enhanced the corrosion resistance of the composite coating in 0.05 M HCl solution.     

Synthesis and performance of core-shell structured ZnO/In2O3 composites in situ growth

Core-shell structured ZnO/In₂O₃ composites were successfully synthesized via situ growth method. Phase structure, morphology, microstructure and property of the products were investigated by X-ray diffraction (XRD), TG-DTA, field emission scanning electron microscopy (FESEM), energy-dispersive spectrometry (EDS), transmission electron microscope (TEM) and photoluminescence (PL). Results show that the core-shell structures consist of spindle-like ZnO with about 800 nm in length and 200 nm in diameter, and In₂O₃ particles with a diameter of 50 nm coated on the surface of ZnO uniformly. HMTA plays an important role in the formation of core-shell structures and the addition of In₂O₃ has a great effect on PL spectrum. Possible mechanism for the formation of core-shell structures is also proposed in this paper.     

Improvement of multiferroic and leakage property in monophasic BiFeO3

This paper aims to report that impurity phase free single phase multiferroic BiFeO₃ ceramic can be prepared by critically optimizing the metal ion concentration using slow step sintering schedule at 850 °C for 24 h. Antiferromagnetic character of pure BiFeO₃ is completely changed and ferromagnetic behavior observed with increase of Bi as well as decrease of Fe concentration. It is found that Bi rich (Bi: 1.2) Fe deficient (Fe: 0.8) composition produces single phase rhombohedral structure with space group R3c along with enhanced ferroelectric and ferromagnetic properties. Incorporation of excess bismuth caused structural distortion and expected to compensate Bi loss during high temperature sintering. On the other hand, iron deficient helps the formation of Fe³⁺ state, which hinders the creation of oxygen vacancies and also favors the reduction of leakage current. Structural distortion in BiFeO₃ changes Fe-O-Fe bond angle or spin order, destructs the spin cycloid and releases a locked magnetization.     

Electrical behavior of high resistivity Ce-doped BiFeO3 multiferroic

Bi_1+xCe_xFeO₃ (Ce–BFO) for x=0, 0.05, 0.1, and 0.15 monophasic ceramic samples were successfully synthesized by conventional solid-state reaction routes. The influences of Ce doping on structural, dielectric, ferroelectric, leakage current and capacitive properties of BiFeO₃ ceramics were investigated intensively. At higher concentrations of x (x=0.1 and 0.15) the samples showed good crystallinity with almost impurity free phases. No structural phase transformation took place after partial doping of Ce ions and all ceramic bulk samples remain in their rhombohedral structure with space group R3c. The dielectric behavior of the samples improved significantly and the ferroelectric hysteresis loops changed their shape from rounded to a strongly nonlinear typical ferroelectric feature mainly originating from the domain switching and became enhanced with increase in doping concentration of cerium (Ce). Experimental results also suggested that partial doping of higher valence, smaller ionic radius Ce ions in BiFeO₃ forces the reduction of oxygen vacancies, resulting in a great suppression of leakage current. It is found that the sharp capacitance peak/discontinuity present in the C–V characteristics of Ce–BFO for different Ce doping concentrations is directly associated with the polarization reversal. Incorporation of excess bismuth in the presence of Ce in BiFeO₃ is expected to compensate Bi loss during high temperature sintering and caused structural distortion which also favors enhancement of ferroelectric properties in Ce-doped BFO.