Hyperbranched conjugated polymers with donor-π-acceptor architecture as organic sensitizers for dye-sensitized solar cells

Three novel hyperbranched conjugated polymers (H-tpa, H-cya, and H-pca) with the same conjugated core structure and different functional terminal units were synthesized and applied in dye-sensitized solar cells (DSSCs) as photosensitizers. The photophysical, electrochemical and photovoltaic properties of the three hyperbranched conjugated polymers (HBPs) were investigated in detail. The results showed that donor-π-acceptor architecture in hyperbranched molecule benefited intramolecular charge transfer and consequently increased the generation of photocurrent. The three-dimensional (3D) steric configuration of HBPs could effectively suppress the aggregation of dyes on TiO₂ film, which is beneficial for achieving good photovoltaic performances. Among the three hyperbranched dyes, the highest power conversion efficiency (η) of 3.93% (J_sc = 8.78 mA/cm², V_oc = 0.65 V, FF = 0.688) was obtained with a DSSC based on H-pca dye upon the addition of the same mass ratio chenodeoxycholic acid (CDCA) as coadsorbent under AM 1.5 irradiation with 100 mW/cm² simulated sunlight.     

The role of the π linker in donor-π-acceptor organic dyes for high-performance sensitized solar cells

The key elements arising from different linkers between donor (D) and acceptor (A) fragments in D-π-A organic dyes are computationally studied. Taking triarylamine and the cyanoacrylic acid fragments as donor and acceptor units, respectively, the role of the different separators is computationally explored by means of optimized geometries, frontier molecular orbitals, static polarizabilities and hyperpolarizabilities, excitation energies to the lowest excited singlet, the charge-transfer character of the transition, and simulated absorption spectra. The results are compared to two closely related sets of linkers. Electronic-structure calculations on the studied organic dyes are performed with the CIS(D) wave function based method and time-dependent density functional theory (ωB97, ωB97X, and ωPBEh functionals). Solvation effects are introduced with the polarizable continuum model (PCM).     

D-π-A dye system containing cyano-benzoic acid as anchoring group for dye-sensitized solar cells

A D-π-A dye (KM-1) incorporating cyano-benzoic acid as a new acceptor/anchoring group has been synthesized for dye-sensitized solar cells (DSCs) with a high molar extinction coefficient of 66,700 M(-1) cm(-1) at 437 nm. Theoretical calculations show that the hydrogen bond between -CN and surface hydroxyl leads to the most stable configuration on the surface of TiO(2). In addition, the adsorption of the dye on TiO(2) follows a Brunauer-Emmett-Teller (BET) isotherm. Multilayer adsorption of KM-1 on TiO(2) seems to take place particularly at higher dye concentrations. DSC device using KM-1 reached a maximum incident photon-to-current conversion efficiency (IPCE) of 84%, with a solar to electric power conversion efficiency (PCE) of 3.3% at AM1.5 G illumination (100 mW cm(-2)). This new type of anchoring group paves a way to design new dyes that combine good visible light harvesting with strong binding to the metal oxide surface.     

New D-π-A dyes for efficient dye-sensitized solar cells

Functional organic dyes have promising prospect in dye-sensitized solar cells as a crucial element, of which sensitizers based on donor-π-acceptor are the most important dyes. On the basis of the structures of the aromatic amine donors such as triphenylamine and indoline, this paper reviews the photoelectric conversion properties of organic sensitizers since 2008, and highlights research work in our laboratory in this area.     

Azulene – Thiophene – Cyanoacrylic acid dyes with donor-π-acceptor structures. Synthesis,characterisation and evaluation in dye-sensitized solar cells

We report the synthesis of five new azulene containing dyes, having D-π-A type structures. These dyes are synthesised using a sulfonium salt cross-coupling reaction. The dyes have been evaluated spectroscopically, electrochemically, crystallographically, and as sensitizers in dye-sensitized solar cells. We propose a rationale for the dyes' spectroscopic properties and performance in cells, based on conformational data derived from their crystal structures.     

A new D–D–π–A dye for efficient dye-sensitized solar cells

New metal-free organic dye sensitizers containing mono-triphenylamine or bis-triphenylamine as the electron donor, a thiophene as the π-conjugated system, and a cyanoacrylic acid moiety as the electron acceptor were synthesized. The optical and electrochemical properties of the dyes were investigated,and their performance as sensitizers in solar cells was evaluated. Dye-sensitized solar cells based on dye containing bis-triphenylamine as the electron donor produced a photon-to-current conversion efficiency of 6.06%(Jsc = 14.21 m A/cm~2, Voc = 0.62 V, ff = 0.69) under 100 m W/cm~2 simulated AM 1.5 G solar irradiation(100 m W/cm~2).     

Molecular engineering for panchromatic absorbing oligothiophene donor-π-acceptor organic semiconductors

A series of three novel organic semiconductor molecules based on the donor-π-bridge-acceptor (D-π-A) modular design have been designed, synthesised and characterised. These small organic molecules have a common donor (triphenylamine), π-bridge (an alkylated tetrathiophene) and various acceptors to provide tuning of optical and electronic properties. The examined acceptors were dicyanovinylidene, cyanopyridone and oxoindenemalononitrile groups. These compounds were highly soluble in common organic solvents, such as chloroform, toluene and chlorobenzene. As acceptor strength increased from dicyanovinylidene to cyanopyridone to oxoindenemalononitrile groups, the wavelength of the longest wavelength absorption maximum increased (518, 587, 619 nm (solution)), the respective extinction coefficients increased (4.9×10⁴, 6.3×10⁴, 7.4×10⁴ M⁻¹ cm⁻¹) and with increasing acceptor strength the band gap narrowed (1.63, 1.42 1.38 eV). Panchromatic absorbance was observed for the compounds comprising the cyanopyridone and oxoindenemalononitrile acceptors.     

Dye-sensitized solar cells based on donor-π-acceptor fluorescent dyes with a pyridine ring as an electron-withdrawing-injecting anchoring group

A new‐type of donor–acceptor π‐conjugated (D‐π‐A) fluorescent dyes NI3 – NI8 with a pyridine ring as electron‐withdrawing‐injecting anchoring group have been developed and their photovoltaic performances in dye‐sensitized solar cells (DSSCs) are investigated. The short‐circuit photocurrent densities and solar energy‐to‐electricity conversion yields of DSSCs based on NI3 – NI8 are greater than those for the conventional D‐π‐A dye sensitizers NI1 and NI2 with a carboxyl group as the electron‐withdrawing anchoring group. The IR spectra of NI3 – NI8 adsorbed on TiO₂ indicate the formation of coordinate bonds between the pyridine ring of dyes NI3 – NI8 and the Lewis acid sites (exposed Tiⁿ⁺ cations) of the TiO₂ surface. This work demonstrates that the pyridine rings of D‐π‐A dye sensitizers that form a coordinate bond with the Lewis acid site of a TiO₂ surface are promising candidates as not only electron‐withdrawing anchoring group but also electron‐injecting group, rather than the carboxyl groups of the conventional D‐π‐A dye sensitizers that form an ester linkage with the Brønsted acid sites of the TiO₂ surface.     

Mechanofluorochromism of heteropolycyclic donor-π-acceptor type fluorescent dyes

This paper reports that mechanofluorochromism is found for a series of benzofuro[2,3-c]oxazolo[4,5-a]carbazole-type fluorophores (1a-5a) with different p-substituted phenyl groups as acceptor and dibutylamino groups as donor. Grinding of as-recrystallized dyes 1a-3a with strong electron-accepting group induces a fluorescent color change with an enhanced quantum yield and the fluorescent color is recovered by heating or exposure to solvent vapor. On the basis of experimental results and semi-empirical molecular orbital calculations (AM1 and INDO/S), we clarified that the mechanofluorochromism is attributed to a reversible switching between crystalline and amorphous states with changes of dipole-dipole interaction and intermolecular π-π interaction by changes of the densities of the solids before and after grinding.     

Novel D-π-A type II organic sensitizers for dye sensitized solar cells

Four organic donor-π-conjugated-acceptor (D-π-A) type II dyes with different thiophene linkers are reported for dye sensitized solar cells (DSSCs). For the first time, a donor (triphenylamine) was introduced in type II sensitizers, and 2-hydroxybenzonitrile as acceptor/anchoring moiety was covalently linked TiO₂ particles. The dye LS203 in this series gives the best solar energy conversion efficiency of 3.4%, with J_sc = 7.4 mA cm⁻², V_oc = 0.67 V, FF = 0.69, the maximum IPCE value reaches 66.9%.     

Organic dyes based on triphenylamine for dye-sensitized solar cells:Structure–property relationships

Three new organic dyes based on triphenylamine with a structure of A-D-A-D-A(D1),A-D-A(D2) and D-A(D3) were designed,theoretically calculated and synthesized for dye-sensitized solar cells.Dye D1 exhibits a broader absorption than D2 and D3,due to the intramolecular charge transfer between the donor triphenylamine and the acceptor benzothiadiazole.Dye D1 exhibits a lower HOMO and a lower LUMO than D2 and D3 due to the electron-withdrawing benzothiadiazole.The number of anchoring group cyanoacrylic acid has no obvious influence on absorption and energy levels of D2 and D3.The LUMO of D1 locates on benzothiadiazole rather than cyanoacrylic acid anchoring groups,while the LUMOs of D2 and D3 are localized on cyanoacrylic acid.D2 and D3 give higher short-circuit current density than D1.D3 with one anchoring group gives the highest open-circuit voltage.Consequently,the D3-based device gives the highest efficiency.     

New D-π-A-conjugated organic sensitizers based on α-pyranylidene donors for dye-sensitized solar cells

A series of new push-pull organic dyes incorporating a cyanoacrylic acid group as electron acceptor unit and α-chalcogenopyranylidene group (X = S; O) as electron donor unit has been synthesized, characterized and used as sensitizer for dye-sensitized solar cells (DSSCs). For the first time, α-pyranylidene and thiopyranylidene groups, have been evaluated in DSSC. To obtain the thermodynamic values of the solar cell, an investigation of their electrochemical (CV) and optical properties (UV–vis absorption spectroscopy) is also reported.     

Insulated donor-π-acceptor systems based on fluorene-phosphine oxide hybrids for non-doped deep-blue electroluminescent devices

An ambipolar ternary deep-blue emitter with CIE coordinates of (0.15, 0.07) and high electroluminescent performance was constructed on the basis of an insulated donor-π-acceptor system through an indirect linkage.     

Structure-property relationships of organic dyes with D-π-A structure in dye-sensitized solar cells

Organic dyes with a D-π-A structure have drawn increasing attention as sensitizers in dye-sensitized solar cells (DSSCs), due to their rich photophysical properties, easy molecular tailoring, and low-cost production. This review mainly focuses on the relationship between dye structure and photovoltaic properties for organic dyes containing cyanoacrylic acid as both an anchor and an acceptor. This review also introduces different donors and π-conjugation units as building blocks for sensitizer synthesis.     

2,1,3-Benzothiadiazole-containing donor–acceptor–acceptor dyes for dye-sensitized solar cells

A series of organic dyes with a donor–acceptor–acceptor (D–A–A) configuration, in which various diarylthienylamine donors and a cyanoacrylic acid acceptor are bridged by a low-band-gap 2,1,3-benzothiadiazole acceptor, have been synthesized, characterized, and employed as photosensitizers for dye-sensitized solar cells (DSSCs). The adoption of 2,1,3-benzothiadiazole as the bridging acceptor endowed these tailor-made dyes with superior light-harvesting capabilities in comparison to their previously reported pyrimidine-based analogs. After fine-tuning the fabrication conditions, DSSCs based on these dyes showed solar spectral responses extending to the near-IR region and achieved power conversion efficiencies (PCEs) of up to 3.16% (OHexDPTB) under simulated AM 1.5G irradiation (100 mW cm^?2).     

New D-π-A-conjugated organic sensitizers based on 4H-pyran-4-ylidene donors for highly efficient dye-sensitized solar cells

We have synthesized a series of four new promising D-π-A conjugated organic sensitizers with a proaromatic 4H-pyran-4-ylidene as a donor, a thiophene ring in the bridge, and 2-cyanoacrilic acid as acceptor. Comparison between different donor substituents and the modification of the thiophene ring resulted in molar extinction coefficients as high as 36399 M(-1) cm(-1) at 551 nm. The photovoltaic properties of the DSSCs demonstrate power conversion efficiencies as high as 5.4%.     

A novel donor-π-acceptor anthracene monomer: Towards faster and milder reversible dimerization

A novel functional 2,6-substituted donor-acceptor anthracene derivative, bearing a long alkyl spacer and a polymerizable end-group, is synthesized from readily available compounds. This monomer possesses conjugated electron donor and acceptor moieties to achieve UV absorption and anthracene dimerization at higher wavelengths and under milder conditions, than anthracene and other reported anthracene derivatives. The compound was shown to absorb at higher wavelengths and dimerize much faster compared to most 9-substituted anthracenes. The fast photochemical and relatively slow thermal scission of the dimers were studied and related to the chemical structure, i.e. the 2,6-substitution.     

Femtosecond to millisecond studies of electron transfer processes in a donor-(π-spacer)-acceptor series of organic dyes for solar cells interacting with titania nanoparticles and ordered nanotube array films

Time-resolved emission and absorption spectroscopy are used to study the photoinduced dynamics of forward and back electron transfer processes taking place between a recently synthesized series of donor-(π-spacer)-acceptor organic dyes and semiconductor films. Results are obtained for vertically oriented titania nanotube arrays (inner diameters 36 nm and 70 nm), standard titania nanoparticles (25 nm diameter) and, as a reference, alumina nanoparticle (13 nm diameter) films. The studied dyes contain a triphenylamine group as an electron donor, cyanoacrylic acid part as an electron acceptor, and differ by the substituents in a spacer group that causes a shift of its absorption spectra. Despite a red-shift of the dye absorption band resulting in an improved response to the solar spectrum, smaller electron injection rates and smaller extinction coefficients result in reduced dye sensitized solar cell (DSSC) conversion efficiencies. For the most efficient dye, TPC1, electron injection from the hot locally excited state to titania on a time scale of about 100 fs is suggested, while from the relaxed charge transfer state it proceeds in a non-exponential way with time constants from 1 ps to 50 ps. Our results imply that the latter process involves the trap states below the conduction band edge (or the sub-bandgap tail of the acceptor states), localized close to the dye radical cation, and is accompanied by fast electron recombination to the parent dye's ground state. This process should limit the efficiency of DSSCs made using these types of organic dyes. The residual, slower recombination can be described by a stretched exponential decay with a characteristic time of 0.5 μs and a dispersion parameter of 0.33. Both the electron injection and back electron transfer dynamics are similar in titania nanoparticles and nanotubes. Variations between the two film types are only found in the time resolved emission transients, which are explained in terms of the difference in local electric fields affecting the position of the emission bands.     

Synthesis and photovoltaic performances of donor-π-acceptor dyes utilizing 1,3,5-triazine as π spacers

A series of new-type of donor-π-acceptor dyes (TCT-1-6) utilizing 1,3,5-triazine as π spacers were synthesized. These dyes were characterized by ¹H NMR, ESI-MS, EA, and X-ray crystallography. Their photovoltaic performances were also investigated. An overall photon-to-electron conversion efficiency of 1.8% was achieved with the DSSC based on the dye TCT-1(J_sc = 3.33 mA/cm², V_oc = 757 mV, FF = 71.8%) under AM 1.5G illumination (100 mW/cm²).