First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

First-principles calculations of structural stability and mechanical properties of tungsten carbide under high pressure

The structural stability and mechanical properties of WC in WC-, MoC- and NaCl-type structures under high pressure are investigated systematically by first-principles calculations. The calculated equilibrium lattice constants at zero pressure agree well with available experimental and theoretical results. The formation enthalpy indicates that the most stable WC is in WC-type, then MoC-type finally NaCl-type. By the elastic stability criteria, it is predicted that the three structures are all mechanically stable. The elastic constants C_ij, bulk modulus B, shear modulus G, Young?s modulus E and Poisson?s ratio ν of the three structures are studied in the pressure range from 0 to 100 GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is assessed. Moreover, the elastic anisotropy of the three structures up to 100 GPa is also discussed in detail.     

Structural,elastic and mechanical properties of orthorhombic SrHfO3 under pressure from first-principles calculations

Structural, elastic and mechanical properties of orthorhombic SrHfO₃ under pressure have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density functional theory. The calculated equilibrium lattice parameters and elastic constants of orthorhombic SrHfO₃ at zero pressure are in good agreement with the available experimental and calculational values. The lattice parameters, total enthalpy, elastic constants and mechanical stability of orthorhombic SrHfO₃ as a function of pressure were studied. With the increasing pressure, the lattice parameters and volume of orthorhombic SrHfO₃ decrease whereas the total enthalpy increases. Orthorhombic SrHfO₃ is mechanically stable with low pressure (<52.9 GPa) whereas that is mechanically instable with high pressure (>52.9 GPa). The bulk modulus, shear modulus, Young's modulus and mechanical anisotropy of orthorhombic SrHfO₃ as a function of pressure were analyzed. It is found that orthorhombic SrHfO₃ under pressure has larger bulk modulus, better ductility and less mechanical anisotropy than orthorhombic SrHfO₃ at 0 GPa.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.     

二元Ni-Al合金极端条件下的弹性和热力学性能：全电子准谐波近似 cited: 1)

通过在原子尺度上建模来研究Al、NiAl和Ni₃Al合金在极端高温和高压下的点阵常数、弹性常数、弹性模量、泊松比和弹性各向异性因子等性质．计算得到的弹性常数均满足相应的力学稳定条件．由于NiAl和Ni₃Al具有较高的B=G值,在0～30 GPa内都属于延展性材料．通过包含电子热运动对体系吉布斯自由能贡献的全电子准谐近似方法,得到了高温高压下Al、NiAl和Ni₃Al合金的热膨胀系数、体积模量、热容和熵等．计算值与已有的实验值和理论值符合较好     

Elastic and electronic properties of YNi2B2C under pressure from first principles

The elastic and electronic structure properties of YNi₂B₂C under pressure are investigated by performing the generalized gradient approximation (GGA) and local density approximation (LDA) correction scheme in the frame of density functional theory (DFT). The pressure dependences of the normalized lattice parameters a/a₀ and c/c₀, the ratio c/a, and the normalized primitive volume V/V₀ of YNi₂B₂C are also obtained. The lattice constants and bulk modulus obtained are in agreement with the available experimental and other theoretical data. We have also studied the pressure dependences of elastic properties. It is found that, as pressure increases, the elastic constants C₁₁, C₃₃, C₆₆, C₁₂, and C₁₃ increase, the variation of elastic constant C₄₄ is not obvious. Moreover, our compressional and shear wave velocities V_L=6.99 km/s and V_S=3.67 km/s as well as the Debye temperature Θ=549.7 K at 0 GPa compare favorably with the available experimental data. The pressure dependences of band structures, energy gap and density of states are also investigated.     

First-principles studies of structural,mechanical, electronic,optical properties and pressure-induced phase transition of CuInO2 polymorph

Using the first-principles density-functional theory within the generalized gradient approximation (GGA), we have investigated the structural, elastic, mechanical, electronic, and optical properties and phase transition of CuInO₂. Structural parameters including lattice constants and internal parameter, pressure effects and phase transition pressure were calculated. We have obtained the elastic coefficients, bulk modulus, shear modulus, Young's modulus and Poisson's ratio. We find that two phases of CuInO₂ are indirect band gap semiconductors (F–Γ and H–Γ for 3R and 2H, respectively). Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and optical conductivity have been obtained for radiations of up to 30 eV.     

The mechanical,thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study

The lattice constants, elastic properties, electronic structure and thermodynamic properties of Al₃Nb with DO₂₂ structure have been investigated by the first-principles calculation. The calculated lattice constants were consistent with the experimental values, and the structural stability was also studied from the energetic point of view. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated, and brittleness of Al₃Nb was discussed in detail. Besides, the electronic structure of tetragonal Al₃Nb was studied, which indicates a mixture of metallic bond and covalent bond in Al₃Nb and reveals the underlying mechanism of the stability and elastic properties of Al₃Nb. Finally, the thermodynamic properties of Al₃Nb were calculated and the physical properties such as heat capacity and Debye temperature were predicted within the quasi-harmonic approximation.     

Cu_3N弹性和热力学性质的第一性原理研究

利用基于密度泛函理论的第一性原理全势线性缀加平面波方法,研究了立方反ReO3结构Cu3N在零温(0K)零压下的平衡晶格常数、体弹模量及其对压强的一阶导数,计算结果与其他实验及理论结果基本相符.同时得出Cu3N的弹性常数,Poisson比等,并分析出Cu3N在零温零压下是稳定的.通过准谐Debye模型计算Cu3N的热力学性质,得到了Cu3N的晶格常数、等压比热容、等容比热容、热胀系数与温度和压强之间的关系,同时计算出不同温度不同压强下其体弹模量及Debye温度的值。     

Elasticity and thermodynamic properties of RuB2 under pressure

First-principles calculations of the crystal structure and the elastic properties of RuB₂ have been carried out with the plane-wave pseudopotential density functional theory method. The calculated values are in very good agreement with experimental data as well as with some of the existing model calculations. The elastic constants c_ij, the aggregate elastic moduli (B, G, E), Poisson's ratio, and the elastic anisotropy with pressure have been investigated. Through the quasi-harmonic Debye model considering the phonon effects, the isothermal bulk modulus, the thermal expansions, Grüneisen parameters, and Debye temperatures depending on the temperature and pressure are obtained in the whole pressure range from 0 to 60 GPa and temperature range from 0 to 1100 K as well as compared to available data.     

First-principles investigation of the equation of state and elastic properties of perovskite-type SrW(O,N)<Subscript>3</Subscript> under hydrostatic pressures up to 139 GPa

Pressure dependence of the structural and elastic properties of perovskite-type cubic SrWO_2.05N_0.95 was studied using firstprinciples density functional theory (DFT) utilizing the plane wave pseudopotential and the exchange-correlation functionals within the generalized gradient approximation. The estimated bulk modulus and its pressure derivative values from the P ? V data fitted to the third-order Birch-Murnaghan equation of state were close to the data obtained from the independent elastic constants. Based on the generalized Born stability criteria, SrWO_2.05N_0.95 is mechanically stable up to 139 GPa. The influence of hydrostatic pressure (0 to 139 GPa) on the bulk modulus, shear modulus, Young’s modulus, Pugh’s modulus ratio, Poisson’s ratio, Vickers hardness, sound velocities, Debye temperature, Debye-Grüneisen parameter, minimum thermal conductivity and elastic anisotropy of SrWO_2.05N_0.95 was particularly studied in detail. It was found that SrWO_2.05N_0.95 is a ductile and hard solid with large bulk, shear and Young’s modulus and displays an extraordinary low thermal conductivity. Since there are not any experimental or theoretical data available for comparison the results of the present study have revealed an important fundamental information about the elastic properties of perovskite-type cubic SrWO_2.05N_0.95 for future experimental studies.     

Elastic constants and thermodynamic properties of Mg2SixSn1-x from first-principles calculations

<正>This paper stuides the elastic constants and some thermodynamic properties of Mg₂Si_xSn_n-1（x=0,0.25,0.5, 0.75,1） compounds by first-principles total energy calculations using the pseudo-potential plane-waves approach based on density functional theory,within the generalized gradient approximation for the exchange and correlation potential. The elastic constants of Mg₂Si_xSn_n-1 were calculated.It shows that,at 273 K,the elastic constants of Mg₂Si and Mg₂Sn are well consistent with previous experimental data.The isotropy decreases with increasing Sn content.The dependences of the elastic constants,the bulk modulus,the shear modulus and the Debye temperatures of Mg₂Si and Mg₂Si_0.5Sn_0.5 on pressure were discussed.Through the quasi-harmonic Debye model,in which phononic effects were considered,the specific heat capacities of Mg₂Si_xSn_1-x at constant volume and constant pressure were calculated.The calculated specific heat capacities are well consistent with the previous experimental data.     

Elastic,electronic and thermal properties of topological insulator SmB6: first-principles calculations

Abstract

The pressure dependence of the structural, elastic, electronic and thermal properties of Kondo insulator SmB₆ have been systematically studied by density functional theory combined with the quasi-harmonic Debye model. The calculated structure at zero pressure is in good agreement with the available experimental results at low temperature. The obtained elastic constants, bulk modulus and shear modulus indicate that SmB₆ is mechanically stable and behaves in a brittle manner under the applied pressure 0–20 GPa, consistent with available experimental data. In addition, the elastic-relevant properties, Young’s modulus and the Poisson ratio manifest that increasing pressure results in an enhancement in the stiffness of the compound. It is found that unlike temperature, pressure has little effect on the heat capacity of SmB_6. What more important is that we observed an insulator to metal phase transition at about 5.5 GPa through the disappearance of the band gap, well consistent with the experimental data. This transition has little effect on the physical properties of SmB₆.     

Structural and elastic properties of Ce2O3 under pressure from LDA+U method

We investigate the structural and elastic properties of hexagonal Ce₂O₃ under pressure using LDA+U scheme in the frame of density functional theory (DFT). The obtained lattice constants and bulk modulus agree well with the available experimental and other theoretical data. The pressure dependences of normalized lattice parameters a/a ₀ and c/c ₀, ratio c/a, and normalized primitive volume V/V ₀ of Ce₂O₃ are obtained. Moreover, the pressure dependences of elastic properties and three anisotropies of elastic waves of Ce₂O₃ are investigated for the first time. We find that the negative value of C ₄₄ is indicative of the structural instability of the hexagonal structure Ce₂O₃ at zero temperature and 30 GPa. Finally, the density of states (DOS) of Ce₂O₃ under pressure is investigated.     

Structures, phase transition, elastic properties of SnO2 from first-principles analysis

We investigate the structural, phase transition and elastic properties of SnO₂ in the rutile-type, pyrite-type, ZrO₂-type and cotunnite-type phases by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are well consistent with the available experimental and other theoretical data. Also, we find that the rutile→pyrite, pyrite→ZrO₂ and ZrO₂→cotunnite phase transition occur at 12.9, 59.1 and 111.1 GPa, which are in better agreement with the experimental results than those of Gracia et al. (2007). Moreover, we obtain the pressure dependences of elastic constants for the four structures.