Transition from enantioselective high performance to ultra-high performance liquid chromatography: A case study of a brush-type chiral stationary phase based on sub-5-micron to sub-2-micron silica particles

Three brush-type chiral stationary phases (CSPs) differing in the particle size of the starting silica particles have been prepared by covalent grafting of the π-acidic bis-(3,5-dinitrobenzoyl)-derivative of trans-1,2-diaminocyclohexane (DACH-DNB). Starting silica particles of 4.3, 2.6 and 1.9 micron were used to generate the final CSPs using an improved, highly reproducible synthetic methodology, that allowed to assemble and surface-graft the whole chiral selector in only two steps. The different CSPs have been packed in columns of various length and diameters, and fully characterized in terms of flow permeability, kinetic performances and enantioselectivity using a set of test solutes. Very high speed and high resolution applications together with stereodynamic HPLC examples are demonstrated on the columns with reduced particle diameters, on which separations of several enantiomeric pairs are routinely obtained with analysis times in the 15–40 s range.     

High performance liquid chromatography with cyclodextrin and calixarene macrocycle bonded silica stationary phases for separation of steroids

β-Cyclodextrin, p-tert-butyl-calix[8]arene and chloropropyl bonded silica stationary phases have been prepared and were applied at the same time to develop a chromatographic procedure to separate steroids. In order to select the best type of stationary phase for the analysis, similar preparation processes of the two kinds of macrocycle stationary phases with the same spacer were adopted respectively. The chromatographic behaviors and retention mechanisms of the two kinds of macrocycle stationary phases for steroids were systematically studied and compared with those of chloropropyl bonded silica and ODS. The effect of mobile phase variables, such as methanol content, pH value of buffer, ionic strength and buffer composition on chromatographic behaviors was investigated. The results showed that the retention mechanisms of the four stationary phases for steroids were obviously different, and excellent separation was achieved on β-cyclodextrin bonded silica stationary phase (β-CD-BS), as a consequence of the structure and the properties of the stationary phase. The retention process on β-CD-BS exhibited inclusion complexation, hydrogen-bonding and weak hydrophobic interaction, while for p-tert-butyl-calix[8]arene bonded silica stationary phase (CBS), π-π and hydrogen-bonding besides hydrophobic interaction played an important role.     

Poly(1-allylimidazole)-grafted silica,a new specific stationary phase for reversed-phase and anion-exchange liquid chromatography

A new specific stationary phase based on poly(1-allylimidazole)-grafted silica has been synthesized and characterized, by infrared spectra, elemental analysis, thermogravimetric analysis and X-ray photoelectron spectroscopy. The results of test showed that poly(1-allylimidazole) can effectively mask the residual silanol groups and reduce the adverse effect of residual silanol. Using this stationary phase, phenol compounds, aniline compounds, and polycyclic aromatic hydrocarbons were successfully separated with symmetric peak shapes in the reversed-phase chromatography. Inorganic anions (IO₃⁻, BrO₃⁻, Br⁻, NO₃⁻, I⁻, SCN⁻) were also separated completely in the anion-exchange chromatography using sodium chloride solution as the mobile phase. The effects of pH and the concentration of eluent on the separation of inorganic anions were studied. The separation mechanism appears to involve the mixed interactions of hydrogen bonding, hydrophobic, π–π, electrostatic, and anion-exchange interactions.     

3‐D graphene‐supported mesoporous SiO2@Fe3O4 composites for the analysis of pesticides in aqueous samples by magnetic solid‐phase extraction with high‐performance liquid chromatography

Three‐dimensional graphene‐supported mesoporous silica@Fe₃O₄ composites (mSiO₂@Fe₃O₄‐G) were prepared by modifying mesoporous SiO₂‐coated Fe₃O₄ onto hydrophobic graphene nanosheets through a simple adsorption co‐condensation method. The obtained composites possess unique properties of large surface area (332.9 m²/g), pore volume (0.68 cm³/g), highly open pore structure with uniform pore size (31.1 nm), as well as good magnetic separation properties. The adsorbent (mSiO₂@Fe₃O₄‐G) was used for the magnetic solid‐phase extraction of seven pesticides with benzene rings in different aqueous samples before high‐performance liquid chromatography. The main parameters affecting the extraction such as adsorbent amount, volume of elution solvent, time of extraction and desorption, salt effect, oscillation rate were investigated. Under the optimal conditions, this method provided low limits of detection (S/N = 3, 0.525–3.30 μg/L) and good linearity (5.0–1000 μg/L, R² > 0.9954). Method validation proved the feasibility of the developed adsorbent, which has a high extraction efficiency and excellent enhancement performance for pesticides in this study. The proposed method was successfully applied to real aqueous samples, and satisfactory recoveries ranging from 77.5 to 113.6% with relative standard deviations within 9.7% were obtained.     

Validation according to European Commission Decision 2002/657/EC of a confirmatory method for aflatoxin M1 in milk based on immunoaffinity columns and high performance liquid chromatography with fluorescence detection

A high performance liquid chromatographic method with fluorimetric detection for the determination of aflatoxin M₁ (AFM₁) in milk has been optimized and validated according to Commission Decision 2002/657/EC by using the conventional validation approach. The procedure for determining selectivity, recovery, precision, decision limit (CC_α), detection capability (CC_β) and ruggedness of the method has been reported. The results of the validation process demonstrate the agreement of the method with the provisions of Commission Regulation 401/2006/EC. The mean recovery calculated at three levels of fortification (0.5, 1.0, and 1.5-fold the MRL) was 91% and the maximum relative standard deviation value for the within-laboratory reproducibility was 15%. Limit of detection (LOD) and limit of quantitation (LOQ) values were 0.006 μg kg⁻¹ and 0.015 μg kg⁻¹ while the CC_α and CC_β values were 0.058 μg kg⁻¹ and 0.065 μg kg⁻¹, respectively. The relative expanded measurement uncertainty of the method was 7%. The method was not affected by slight variations of some critical factors (ruggedness minor changes) as pre-treatment and clean-up of milk samples, thermal treatment and different storage conditions, as well as by major changes valued in terms of milk produced by different species (buffalo, goat and sheep). The method allowed accurate confirmation analyses of milk samples, resulted positive by the screening method. In fact, the Z-score values attained in a proficiency test round were well below the reference value of 1, proving the excellent laboratory performances.