Gate-controlled current and inelastic electron tunneling spectrum of benzene: a self-consistent study

We use density functional theory based nonequilibrium Green's function to self-consistently study the current through the 1,4-benzenedithiol (BDT). The elastic and inelastic tunneling properties through this Au-BDT-Au molecular junction are simulated, respectively. For the elastic tunneling case, it is found that the current through the tilted molecule can be modulated effectively by the external gate field, which is perpendicular to the phenyl ring. The gate voltage amplification comes from the modulation of the interaction between the electrodes and the molecules in the junctions. For the inelastic case, the electron tunneling scattered by the molecular vibrational modes is considered within the self-consistent Born approximation scheme, and the inelastic electron tunneling spectrum is calculated.     

Adsorbed states and scanning tunneling microscopy induced migration of acetylene on Cu(110)

The authors have studied adsorption of acetylene on Cu(110) by means of low-temperature scanning tunneling microscopy. Adsorbed molecules preferentially aggregate at 40 K to yield dimer, trimer, and larger islands on the surface. Isolated species (monomer) adsorbs on the fourfold hollow site with approximately sp3 rehybridization as characterized by inelastic electron tunneling spectroscopy. Tunneling electron induces an acetylene molecule to migrate along the trough of Cu(110). The migration proceeds in two steps: the molecule first hops to the adjacent long-bridge site and then to the next fourfold site. The voltage and current dependencies of the hopping probability show that the migration is induced by inelastic electron tunneling that causes vibrational excitation of mainly C-H stretch mode.     

Inelastic electron tunneling spectroscopy in molecular junctions: peaks and dips

We study inelastic electron tunneling through a molecular junction using the nonequilibrium Green's function formalism. The effect of the mutual influence between the phonon and the electron subsystems on the electron tunneling process is considered within a general self-consistent scheme. Results of this calculation are compared to those obtained from the simpler Born approximation and the simplest perturbation theory approaches, and some shortcomings of the latter are pointed out. The self-consistent calculation allows also for evaluating other related quantities such as the power loss during electron conduction. Regarding the inelastic spectrum, two types of inelastic contributions are discussed. Features associated with real and virtual energy transfer to phonons are usually observed in the second derivative of the current I with respect to the voltage Phi when plotted against Phi. Signatures of resonant tunneling driven by an intermediate molecular ion appear as peaks in the first derivative dI/dPhi and may show phonon sidebands. The dependence of the observed vibrationally induced lineshapes on the junction characteristics, and the linewidth associated with these features are also discussed.     

Simulation of single molecule inelastic electron tunneling signals in paraphenylene-vinylene oligomers and distyrylbenzene[2.2]paracyclophanes

Inelastic resonances in the electron tunneling spectra of several conjugated molecules are simulated using the nonequilibrium Greens function formalism. The vibrational modes that strongly couple to the electronic current are different from the infrared and Raman active modes. Spatially resolved inelastic electron tunneling (IET) intensities are predicted. The simulated IET intensities for a large distyrylbenzene paracyclophane molecule are in qualitative agreement with recent experimental results.     

The initiation and characterization of single bimolecular reactions with a scanning tunneling microscope

A scanning tunneling microscope (STM) operating at 9 K in ultrahigh vacuum was used to initiate a bimolecular reaction between isolated hydrogen sulfide and dicarbon molecules on the Cu(001) surface. The reaction products ethynyl (CCH) and sulfhydryl (SH) were identified by inelastic electron tunneling spectroscopy (STM-IETS) and by sequentially removing hydrogen atoms from an H2S molecule using energetic tunneling electrons. For comparison, the thermal diffusion and reaction of H2S and CC at 45 K and H2O and CC at 9 K were also observed.     

Inelastic electron tunneling spectroscopy by STM of phonons at solid surfaces and interfaces

Inelastic electron tunneling spectroscopy (IETS) combined with scanning tunneling microscopy (STM) allows the acquisition of vibrational signals at surfaces. In STM-IETS, a tunneling electron may excite a vibration, and opens an inelastic channel in parallel with the elastic one, giving rise to a change in conductivity of the STM junction. Until recently, the application of STM-IETS was limited to the localized vibrations of single atoms and molecules adsorbed on surfaces. The theory of the STM-IETS spectrum in such cases has been established. For the collective lattice dynamics, i.e., phonons, however, features of STM-IETS spectrum have not been understood well, though in principle STM-IETS should also be capable of detecting phonons. In this review, we present STM-IETS investigations for surface and interface phonons and provide a theoretical analysis. We take surface phonons on Cu(1?1?0) and interfacial phonons relevant to graphene on SiC substrate as illustrative examples. In the former, we provide a theoretical formalism about the inelastic phonon excitations by tunneling electrons based on the nonequilibrium Green’s function (NEGF) technique applied to a model Hamiltonian constructed in momentum space for both electrons and phonons. In the latter case, we discuss the experimentally observed spatial dependence of the STM-IETS spectrum and link it to local excitations of interfacial phonons based on ab-initio STM-IETS simulation.     

Single-molecule vibrations, conformational changes, and electronic conductivity of five-membered heterocycles

Using an ultrahigh vacuum scanning tunneling microscope (STM), we have explored the interactions of isolated five-membered heterocycles, pyrrole, thiophene, pyrrolidine, and tetrahydrothiophene, with the Cu(001) surface at 9 K. Pyrrolidine was also studied on the Ag(001) surface. Important distinctions in bonding, vibrational spectra, and vibrationally mediated negative differential resistance were observed with the aid of single-molecule inelastic electron tunneling spectroscopy (STM-IETS).     

Inelastic electron tunneling spectroscopy and vibrational coupling

We discuss the relationship between the inelastic electron tunneling spectroscopy (IETS) and vibronic coupling constant within the Green's function formalism at a level of perturbation theory approximation. We also compare our results with experimental measurements. Our results can provide insights into the mechanism of active vibronic modes for IETS.     

Imaging and vibrational spectroscopy of single pyridine molecules on Ag(110) using a low-temperature scanning tunneling microscope

A scanning tunneling microscope (STM) was used to extract the images of single, isolated pyridine molecules adsorbed on Ag(110) and to record their vibrational spectrum at 13 K. On the STM image, the pyridine molecule appears as an elongated protrusion along the [001] direction on top of a silver atom, indicating that it is bonded through its nitrogen lone pair electrons. STM inelastic electron tunneling spectroscopy of the adsorbed pyridine revealed C-D and C-H stretch modes at 282 and 378 meV, respectively.     

Excitation of local magnetic moments by tunneling electrons

The advent of milli-kelvin scanning tunneling microscopes (STM) with inbuilt magnetic fields has opened access to the study of magnetic phenomena with atomic resolution at surfaces. In the case of single atoms adsorbed on a surface, the existence of different magnetic energy levels localized on the adsorbate is due to the breaking of the rotational invariance of the adsorbate spin by the interaction with its environment, leading to energy terms in the meV range. These structures were revealed by STM experiments in IBM Almaden in the early 2000s for atomic adsorbates on CuN surfaces. The experiments consisted in the study of the changes in conductance caused by inelastic tunneling of electrons (IETS, inelastic electron tunneling spectroscopy). Manganese and Iron adatoms were shown to have different magnetic anisotropies induced by the substrate. More experiments by other groups followed up, showing that magnetic excitations could be detected in a variety of systems: e.g. complex organic molecules showed that their magnetic anisotropy was dependent on the molecular environment, piles of magnetic molecules showed that they interact via intermolecular exchange interaction, spin waves were excited on ferromagnetic surfaces and in Mn chains, and magnetic impurities have been analyzed on semiconductors. These experiments brought up some intriguing questions: the efficiency of magnetic excitations was very high, the excitations could or could not involve spin flip of the exciting electron and singular-like behavior was sometimes found at the excitation thresholds. These facts called for extended theoretical analysis; perturbation theories, sudden-approximation approaches and a strong coupling scheme successfully explained most of the magnetic inelastic processes. In addition, many-body approaches were also used to decipher the interplay between inelastic processes and the Kondo effect. Spin torque transfer has been shown to be effective in changing spin orientations of an adsorbate in theoretical works, and soon after it was shown experimentally. More recently, the previously mentioned strong coupling approach was extended to treat the excitation of spin waves in atomic chains and the ubiquitous role of electron–hole pair creation in de-exciting spins on surfaces has been analyzed. This review article expounds these works, presenting the theoretical approach by the authors while trying to thoroughly review parallel theoretical and experimental works.     

Luminescence from 3,4,9,10-perylenetetracarboxylic dianhydride on Ag(111) surface excited by tunneling electrons in scanning tunneling microscopy

The electronic excitations induced with tunneling electrons into adlayers of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) on Ag(111) have been investigated by in situ fluorescence spectroscopy in scanning tunneling microscopy (STM). A minute area of the surface is excited by an electron tunneling process in STM. Fluorescence spectra strongly depend on the coverage of PTCDA on Ag(111). The adsorption of the first PTCDA layer quenches the intrinsic surface plasmon originated from the clean Ag(111). When the second layer is formed, fluorescence spectra are dominated by the signals from PTCDA, which are interpreted as the radiative decay from the manifold of first singlet excited state (S(1)) of adsorbed PTCDA. The fluorescence of PTCDA is independent of the bias polarity. In addition, the fluorescence excitation spectrum agrees with that by optical excitation. Both results indicate that S(1) is directly excited by the inelastic impact scattering of electrons tunneling within the PTCDA adlayer.     

Theory of electron tunneling through a bridge molecule with two electronic levels at low temperatures

A theory of electron tunneling through a single-center bridge redox group that has two electronic levels participating in the electron transfer process is presented. The temperature is presumed to be low enough to ignore activation redox conversions of the bridge group. Salient features of this system are due both to the presence of two electroactive states of the bridge group and to relaxation processes along the reaction coordinate. The processes in question make the tunneling current time-dependent at fixed potentials and can bring about hysteresis in current-voltage curves when cycling the bias potential. Effects of inelastic tunneling with excitation of vibrations of a local quantum degree of freedom are considered.     

Electric field effect on the vibration of single CO molecules in a scanning tunneling microscope junction

A low-temperature scanning tunneling microscope (STM) and ab initio calculations were used to study the electric field effect on the vibration of single CO molecules in an STM junction at 13 K. The vibrational energy of CO molecules adsorbed on silver atoms, measured by STM-based inelastic electron tunneling spectroscopy, depends on the direction of the electric field applied between the STM tip and the silver species. This characteristic can be explained by the charge separation model. The electric field modifies the binding characteristics of CO on silver as a result of a change in the charged states of the species, which leads to an increase (or a decrease) of the energies of the hindered rotation and the CO stretch on silver.     

Coherence in electron transfer pathways

Central to the view of electron-transfer reactions is the idea that nuclear motion generates a transition state geometry at which the electron/hole amplitude propagates coherently from the electron donor to the electron acceptor. In the weakly coupled or nonadiabatic regime, the electron amplitude tunnels through an electronic barrier between the donor and acceptor. The structure of the barrier is determined by the covalent and noncovalent interactions of the bridge. Because the tunneling barrier depends on the nuclear coordinates of the reactants (and on the surrounding medium), the tunneling barrier is highly anisotropic, and it is useful to identify particular routes, or pathways, along which the transmission amplitude propagates. Moreover, when more than one such pathway exists, and the paths give rise to comparable transmission amplitude magnitudes, one may expect to observe quantum interferences among pathways if the propagation remains coherent. Given that the effective tunneling barrier height and width are affected by the nuclear positions, the modulation of the nuclear coordinates will lead to a modulation of the tunneling barrier and hence of the electron flow. For long distance electron transfer in biological and biomimetic systems, nuclear fluctuations, arising from flexible protein moieties and mobile water bridges, can become quite significant. We discuss experimental and theoretical results that explore the quantum interferences among coupling pathways in electron-transfer kinetics; we emphasize recent data and theories associated with the signatures of chirality and inelastic processes, which are manifested in the tunneling pathway coherence (or absence of coherence).     

Chemical imaging of single 4,7,12,15-tetrakis[2.2]paracyclophane by spatially resolved vibrational spectroscopy

Single 4,7,12,15-tetrakis[2.2]paracyclophane were deposited on NiAl(110) surface at 11 K. Two adsorbed species with large and small conductivities were detected by the scanning tunneling microscope (STM). Their vibrational properties were investigated by inelastic electron tunneling spectroscopy (IETS) with the STM. Five vibrational modes were observed for the species with the larger conductivity. The spatially resolved vibrational images for the modes show striking differences, depending on the coupling of the vibrations localized on different functional groups within the molecule to the electronic states of the molecule. The vibrational modes are assigned on the basis of ab initio calculations. No IETS signal is resolved from the species with the small conductivity.     

Collective All-Carbon Magnetism in Triangulene Dimers**

Triangular zigzag nanographenes, such as triangulene and its π-extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high-spin networks with long-range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on-surface synthesis and a proof-of-principle experimental study of magnetism in covalently bonded triangulene dimers. On-surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4-phenylene spacer. The chemical structures of the dimers have been characterized by bond-resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet–triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling.     

A theoretical rationalization of a total inelastic electron tunneling spectrum: the comparative cases of formate and benzoate on Cu(111)

Inelastic electron tunneling spectroscopy (IETS) performed with the scanning tunneling microscope (STM) has been deemed as the ultimate tool for identifying chemicals at the atomic scale. However, direct IETS-based chemical analysis remains difficult due to the selection rules that await a definite understanding. We present IETS simulations of single formate and benzoate species adsorbed in the same upright bridge geometry on a (111)-cleaved Cu surface. In agreement with measurements on a related substrate, the simulated IET-spectra of formate/Cu(111) clearly resolve one intense C-H stretching mode whatever the tip position in the vicinity of the molecular fragment. At variance, benzoate/Cu(111) has no detectable IET signal. The dissimilar IETS responses of chemically related molecules--formate and benzoate adsorbates--permit us to unveil another factor that complements the selection rules, namely the degree of the vacuum extension of the tunneling active states perturbed by the vibrations. As a consequence, the lack of a topmost dangling bond orbital is entirely detrimental for STM-based inelastic spectroscopy but not for STM elastic imaging.     

Collective All‐Carbon Magnetism in Triangulene Dimers

Triangular zigzag nanographenes, such as triangulene and its π‐extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high‐spin networks with long‐range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on‐surface synthesis and a proof‐of‐principle experimental study of magnetism in covalently bonded triangulene dimers. On‐surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4‐phenylene spacer. The chemical structures of the dimers have been characterized by bond‐resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet–triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling.     

Analytical techniques for characterization of organic molecular assemblies in molecular electronics devices

The analytical techniques used for the physical characterization of organic molecular electronic-based devices are surveyed and discussed. These protocols include methods that are used to probe molecular assemblies such as single wavelength ellipsometry, water contact angle goniometry, cyclic voltammetry, infrared spectroscopy, and X-ray photoelectron spectroscopy, and methods used to measure charge transport properties of devices such as scanning tunneling microscopy, and inelastic electron tunneling spectroscopy. Examples from our laboratory and the literature are given for each of these analytical techniques.     

Dynamics and spectroscopy of hydrogen atoms on Pd{111}

Chemisorption of hydrogen on Pd{111} is a relatively simple, yet important surface chemical process. By using low-temperature scanning tunneling microscopy, tip-induced motion of adsorbed atomic hydrogen at 4 K has been observed at low coverage. The motion has been ascribed to excitation of vibrational modes that decay into translational modes; vibrational spectroscopy via inelastic electron tunneling corroborates this assignment, and the barrier to hydrogen atom motion has been determined. At higher coverages, tip-induced motion of vacancies in the hydrogen overlayer is observed, and the associated barrier has also been determined.