Surface molecular imprinting on g-C3N4 photooxidative nanozyme for improved colorimetric biosensing

Molecular imprinting on g-C₃N₄ leads to an over 1000-fold alleviation in matrix-interference from serum samples.     

Enhanced oxidase-like activity of g-C3N4 nanosheets supported Pd nanosheets for ratiometric fluorescence detection of acetylcholinesterase activity and its inhibitor

The undesirable enzymatic activity of nanozymes under near neutral p H condition and the traditional single signal output always restrict the analytical application of nanozyme-based biosensors.Herein,graphitic carbon nitride nanosheets supported palladium nanosheets composite （Pd/g-C₃N₄） with both oxidase-like activity and fluorescent property is synthesized.Notably,Pd/g-C₃N₄exhibits enhanced oxidase-like activity compared to Pd NSs under p H 7.4.By c...     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

Enhanced Peroxidase-mimicking Activity of Plasmonic Gold-modified Mn3O4 Nanocomposites through Photoexcited Hot Electron Transfer

Enzyme-mimicking artificial nanomaterials often termed nanozymes have broad applications in many fields, including biosensing, pollutant degradation and cancer diagnosis. Herein, we introduce a plasmonic gold nanoparticle-modified Mn₃O₄ nanozyme (Mn₃O₄-Au). Visible or near infrared light excitation into the plasmonic absorption band of the surface-bound gold nanoparticles enhances the catalytic oxidation of tetramethylbenzidine (TMB). The mechanism of light-enhanced peroxidase activity is proposed based on the Mn₃O₄ conduction band mediated hot electron transfer from photoexcited gold nanoparticles to H₂O₂ which undergoes further oxygen-oxygen bond cleavage to yield hydroxyl radical. The surface decoration of plasmonic gold nanoparticles endows Mn₃O₄-Au to be a light-regulated nanozyme.     

Novel CaCO3/g-C3N4 composites with enhanced charge separation and photocatalytic activity

A novel CaCO₃/graphitic carbon nitride (g-C₃N₄) photocatalyst was synthesized for the first time via a facile calcination method using CaCO₃ and melamine as precursors. The as-prepared samples were characterized using various techniques, such as scanning and transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller analysis, as well as Fourier-transform infrared, X-ray photoelectron, photoluminescence, and UV–vis diffuse reflectance spectroscopy. The results of the experiments confirm the successful coupling of CaCO₃ to g-C₃N₄. The photocatalytic activity of the synthesized CaCO₃/g-C₃N₄ composites was evaluated by assessing their performance in the photocatalytic degradation of crystal violet (CV) in water under visible light irradiation. The analysis shows that CaCO₃/g-C₃N₄ exhibits higher photocatalytic activity towards CV degradation (76.0%) than pristine g-C₃N₄ (21.6%) and CaCO₃ (23.2%). Radical trapping and electron spin resonance experiments show that hydroxyl radicals (OH) and holes (h⁺) are the key reactive species in the photocatalytic process. The enhanced photocatalytic activity of the composite is mainly attributed to the efficient separation rate of electron-hole pairs achieved through the incorporation of CaCO₃.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.     

Liposome-Boosted Peroxidase-Mimicking Nanozymes Breaking the pH Limit

Peroxidase-mimicking nanozymes such as Fe₃O₄ nanoparticles are promising substitutes for natural enzymes like horseradish peroxidase. However, most such nanozymes work efficiently only in acidic conditions. In this work, the influence of various liposomes on nanozyme activity was studied. By introducing negatively charged liposomes, peroxidase-mimicking nanozymes achieved oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in neutral and even alkaline conditions, although the activity towards anionic 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) was inhibited. The Fe₃O₄ nanoparticles adsorbed on the liposomes without disrupting membrane integrity as confirmed by fluorescence quenching, dye leakage assays, and cryo-electron microscopy. Stabilization of the blue-colored oxidized products of TMB by electrostatic interactions was believed to be the reason for the enhanced activity. This work has introduced lipids to nanozyme research, and it also has practically important applications for using nanozymes at neutral pH, such as the detection of hydrogen peroxide and glucose.     

In-situ polymerization for PPy/g-C3N4 composites with enhanced visible light photocatalytic performance

Polypyrrole-modified graphitic carbon nitride composites (PPy/g-C₃N₄) are fabricated using an in-situ polymerization method to improve the visible light photocatalytic activity of g-C₃N₄. The PPy/g-C₃N₄ is applied to the photocatalytic degradation of methylene blue (MB) under visible light irradiation. Various characterization techniques are employed to investigate the relationship between the structural properties and photoactivities of the as-prepared composites. Results show that the specific surface area of the PPy/g-C₃N₄ composites increases upon assembly of the amorphous PPy nanoparticles on the g-C₃N₄ surface. Owing to the strong conductivity, the PPy can be used as a transition channel for electrons to move onto the g-C₃N₄ surface, thus inhibiting the recombination of photogenerated carriers of g-C₃N₄ and improving the photocatalytic performance. The elevated light adsorption of PPy/g-C₃N₄ composites is attributed to the strong absorption coefficient of PPy. The composite containing 0.75 wt% PPy exhibits a photocatalytic efficiency that is 3 times higher than that of g-C₃N₄ in 2 h. Moreover, the degradation kinetics follow a pseudo-first-order model. A detailed photocatalytic mechanism is proposed with ·OH and ·O₂^? radicals as the main reactive species. The present work provides new insights into the mechanistic understanding of PPy in PPy/g-C₃N₄ composites for environmental applications.     

Tuning band structure of graphitic carbon nitride for efficient degradation of sulfamethazine: Atmospheric condition and theoretical calculation

Numerous approaches have been used to modify graphitic carbon nitride（g-C₃N₄） for improving its photocatalytic activity. In this study, we demonstrated a facial post-calcination method for modified graphitic carbon nitride（g-C₃N₄-Ar/Air） to direct tuning band structure, i.e., bandgap and positions of conduction band（CB）/valence band（VB）, through the control of atmospheric condition without involving any additional elements or metals or semiconductors. ...     

Bifunctional copper modified graphitic carbon nitride catalysts for efficient tetracycline removal: Synergy of adsorption and photocatalytic degradation

In order to efficiently remove tetracycline in wastewater through the synergistic effect of adsorption and photocatalytic degradation, a series of novel composite materials (Cu doped g-C₃N₄) were synthesized by two-pot hydrothermal method. It was found that the composite materials with optimized ratio (Cu/CN-1) displayed outstanding adsorption and photocatalytic performance as compared with pure g-C₃N₄ photocatalyst. The removal efficiency of tetracycline (TC, 50 mg/L) reached almost 99% within 30 min by Cu/CN-1 through the synergy of adsorption and photocatalysis under visible-light irradiation, which was the highest removal efficiency ever reported. The adsorption kinetics and isotherms of TC on the Cu/CN-1 were well fitted with the pseudo-second-order kinetic model and Langmuir model, respectively. Moreover, it was confirmed that the main effective reactive groups were O₂⁻ and h⁺ in photocatalytic process. The Cu/CN-1 exhibited high stability and excellent reusability after five cycle experiments. Finally, the mechanism of synergy between Cu and g-C₃N₄ was proposed: on the one hand, the decoration of Cu particles significantly increased the adsorption sites of Cu/CN-1 to tetracycline, on the other hand, the modification of Cu particles effectively inhibits charge recombination and broadens the visible light absorption range of the photocatalyst.This study provided a promising photocatalyst to be used for TC removal in the actual wastewater.     

Synergistic improvement of Cr(VI) reduction and RhB degradation using RP/g-C3N4 photocatalyst under visible light irradiation

The RP/g-C₃N₄ heterojunction photocatalyst was fabricated by a facile heat treatment strategy. The obtained composite has excellent light harvesting ability and charge separation performance. Compared to single RP and g-C₃N₄, the 50%-RP/g-C₃N₄ exhibited enhanced photocatalytic activity for simultaneously removing Cr(VI) and RhB, and the removal rates can reach 92% and 99% in 25 min, respectively. The enhanced mechanism was revealed by active species capturing experiments, showing that electrons can reduce Cr(VI) and produce O₂^– in air and that holes can directly oxidize the dyes. The coexistence of Cr(VI) and RhB will lead to a synergistic improvement of Cr(VI) reduction and RhB degradation due to rapid surface reactions. This further improves the charge separation except for the heterojunction effect. In addition, the COD analysis demonstrates that organic dyes are mainly degraded into CO₂, H₂O and some intermediates.     

InP quantum dots on g-C3N4 nanosheets to promote molecular oxygen activation under visible light

Largely limited by the high dissociation energy of the OO bond, the photocatalytic molecular oxygen activation is highly challenged, which restrains the application of photocatalytic oxidation technology for atmospheric pollutants removal. Herein, we design and fabricate the InP QDs/g-C₃N₄ compounds. The introduction of InP QDs promotes the charge transfer within the interface resulting in the effective separation of photo-generated carriers. Furthermore, InP QDs greatly facilitates the activation of molecular oxygen and promote the formation of O₂⁻ under visible-light illumination. These conclusions are identified by experimental and calculation results. Hence, NO can be combined with the O₂⁻ to form OONO intermediate to direct conversion into NO₃⁻. As a result, the NO removal ratio of g-C₃N₄ has a onefold increase after InP QDs loaded and the generation of NO₂ is effectively inhibited. This work may provide a strategy to design highly efficient materials for molecular oxygen activation.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Novel synthesis of Z-scheme α-Bi2O3/g-C3N4 composite photocatalyst and its enhanced visible light photocatalytic performance: Influence of calcination temperature

In this study, α-Bi₂O₃/g-C₃N₄ nanocomposite with direct Z-scheme was successfully prepared through calcination of BiOCOOH/g-C₃N₄ precursor at different temperature. Meanwhile, the effect of calcination temperature on the physicochemical properties of α-Bi₂O₃/g-C₃N₄ was studied. All results confirmed that calcination temperature greatly influences structural, morphology, surface states, photoelectrochemical property and photocatalytic (PC) performance of α-Bi₂O₃/g-C₃N₄ composite. Furthermore, the α-Bi₂O₃/g-C₃N₄ composite was applied as photocatalyst to degrade amido black 10B dye under visible light irradiation. It was found that the composite synthesized at 400 °C exhibited the highest PC performance due to the intense visible light absorbance and high separation efficiency of electron and hole pairs. Besides, the possible PC mechanism was proposed that the photo-generated charge carrier migration in α-Bi₂O₃/g-C₃N₄ photocatalyst followed a Z-scheme structure. Finally, the stability test also manifest that the α-Bi₂O₃/g-C₃N₄ composite photocatalyst has good stability and reusability, which was a promising candidate for wastewater treatment.     

NiFe2O4/g-C3N4 heterojunction composite with enhanced visible-light photocatalytic activity

Spinel structure nickel ferrite (NiFe₂O₄) doped graphitic carbon nitride (g-C₃N₄) photocatalyst NiFe₂O₄/g-C₃N₄ was synthesized by the coprecipitation route to enhance the photocatalytic activity for the visible-light driven degradation of methyl orange. The NiFe₂O₄ doping content is responsible for the microstructure and photocatalytic activity of NiFe₂O₄/g-C₃N₄ samples. Compared with pure NiFe₂O₄ and g-C₃N₄, the 2-NiFe₂O₄/g-C₃N₄ composite with NiFe₂O₄ doping of 2.0 wt% exhibited excellent photocatalytic activity and superior stability after five runs for degrading methyl orange under visible light irradiation. The catalytic activity of 2-NiFe₂O₄/g-C₃N₄ sample produced using the coprecipitation route was higher than those of conventional 2-NiFe₂O₄/g-C₃N₄ bulks prepared by the impregnation approach. The prepared samples for the photocatalytic degradation of methyl orange followed pseudo-first-order reaction kinetics. It’s ascribed to the synergistic effect between NiFe₂O₄ and g-C₃N₄, which can inhibit the recombination of photoexcited electron-hole pairs, accelerate photoproduced charges separation, and enhance the visible light absorption.     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B(RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe...     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄ S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-VisDRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B (RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄ S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe³⁺的加入促进了光生电荷的分离和H₂O₂的活化,超氧阴离子自由基(·O₂^-)、空穴和羟基是光-自芬顿催化过程中的主要活性物种,且·O₂^-作用更大。     

Pt/g-C_3N_4/KB纳米复合催化剂的制备及其甲醇氧化性能

采用溶液中等离子放电法制备出了Pt纳米颗粒,用热氧化刻蚀和水热法成功的对石墨相氮化碳(g-C_3N_4)进行处理进而均匀吸附在科琴黑(KB)表面,最终制备出了Pt/g-C_3N_4/KB纳米复合催化剂。通过XRD分析,扫描电镜,透射电镜和电化学工作站探究了催化剂的组成、结构、颗粒大小以及电化学性能。Pt/g-C_3N_4/KB纳米复合催化剂展现出了良好的甲醇电氧化性能,性能的提升可能是由于g-C_3N_4良好的化学稳定性,N元素的存在改变Pt外层电子结构从而提高催化活性,这些因素提高了Pt的催化效率。     

Pt/g-C3N4/KB纳米复合催化剂的制备及其甲醇氧化性能

采用溶液中等离子放电法制备出了Pt纳米颗粒,用热氧化刻蚀和水热法成功的对石墨相氮化碳（g-C₃N₄）进行处理进而均匀吸附在科琴黑（KB）表面,最终制备出了Pt/g-C₃N₄/KB纳米复合催化剂。通过XRD分析,扫描电镜,透射电镜和电化学工作站探究了催化剂的组成、结构、颗粒大小以及电化学性能。Pt/g-C₃N₄/KB纳米复合催化剂展现出了良好的甲醇电氧化性能,性能的提升可能是由于g-C₃N₄良好的化学稳定性,N元素的存在改变Pt外层电子结构从而提高催化活性,这些因素提高了Pt的催化效率。     

Bound oxygen-atom transfer endows peroxidase-mimic M–N–C with high substrate selectivity

Advances in nanoscience have stimulated the wide exploration of nanozymes as alternatives to enzymes. Nonetheless, nanozymes often catalyze multiple reactions and are not specialized to a specific substrate, restricting their broad application. Here, we report that the substrate selectivity of the peroxidase-mimic M–N–C can be significantly altered via forming bound intermediates with variable interactions with substrates according to the type of metal. Taking two essential reactions in chemical sensing as an example, Fe–N–C and Co–N–C showed opposite catalytic selectivity for the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) and 3-aminophthalhydrazide (luminol), respectively, by factors of up to 200-fold. It was revealed that specific transition metal-N coordination was the origin of the selective activation of H₂O₂ forming critically bound oxygen intermediates (M O) for oxygen-atom transfer and the consequent oxidization of substrates. Notably, owing to the embedded ligands in the rigid graphitic framework, surprisingly, the selectivity of M–N–C was even superior to that of commonly used horseradish peroxidase (HRP).

Learning principles from biology, this work highlights the great potential of biomimetic bound-intermediates in endow nanozymes with high reaction selectivity towards industrial reactions previously not accessible to biology.