Experimental and Theoretical Investigation of Vibrational Spectra of Coordination Polymers Based on TCE‐TTF

The room‐temperature infrared and Raman spectra of a series of four isostructural polymeric salts of 2,3,6,7‐tetrakis(2‐cyanoethylthio)‐tetrathiafulvalene (TCE‐TTF) with paramagnetic (Co^II, Mn^II) and diamagnetic (Zn^II, Cd^II) ions, together with BF₄^? or ClO₄^? anions are reported. Infrared and Raman‐active modes are identified and assigned based on theoretical calculations for neutral and ionized TCE‐TTF using density functional theory (DFT) methods. It is confirmed that the TCE‐TTF molecules in all the materials investigated are fully ionized and interact in the crystal structure through cyanoethylthio groups. The vibrational modes related to the C?C stretching vibrations of TCE‐TTF are analyzed assuming the occurrence of electron–molecular vibration coupling (EMV). The presence of the antisymmetric C?C dimeric mode provides evidence that charge transfer takes place between TCE‐TTF molecules belonging to neighboring polymeric networks.     

Photocatalytic degradation of trichloroethylene over BiOCl under UV irradiation

In this study, BiOCl samples were synthesized under different pH values and characterized by XRD, SEM, UV‐vis DRS, BET, photoelectrochemical measurement and PL. The photocatalytic performances of the as‐prepared samples were evaluated through the decomposition of trichloroethylene (TCE) under UV irradiation. The influences of several parameters such as solution pH and common inorganic anions on TCE removal were investigated. Results indicated that BiOCl‐0.6 exhibited better photocatalytic performance than BiOCl‐6.0 because of its higher migration ability of photo‐induced carrier. The photocatalytic degradation of TCE over BiOCl‐0.6 followed pseudo first‐order kinetics and appeared to be more efficient in acidic solution than in alkaline. TCE was almost completely dechlorinated in 120 minutes. The inhibiting effect of naturally occurring anions was in the order of HCO₃^‐ >SO₄^2‐ >NO₃^‐, while Cl^‐ exhibited a dual effect. Moreover, BiOCl‐0.6 exhibited superior reusability after three cycles of repetition tests.     

Effect of Fullerene Volume Fraction on Two‐Dimensional Crystal‐Constructed Supramolecular Liquid Crystals

The volume fraction plays an important role in phase segregated soft matters. We demonstrate here that at high fullerene volume fraction in soft chain‐tethered‐fullerene dyads, different two‐dimensional (2D) crystal‐constructed smectic‐like lamella liquid crystalline (LC) phases can be formed with triple‐layer (S_T phase) or quadruple‐layer (S_Q phase) stacking of fullerenes in 2D crystals. The combination of 2D crystal and LC properties in one system affords these fullerene dyads controlled electron mobility in the range of 10^?5–10^?3 cm² V^?1 s^?1 at room temperature (S_T phase), by regulating the insulated soft layer thickness between 2D crystals via the manipulation of fullerene volume fraction.     

Photocatalytic degradation of trichloroethylene on platinum ion-doped TiO<Subscript>2</Subscript> under visible light irradiation

Porous platinum ion-doped TiO₂ (Pt–TiO₂) was prepared by a sol–gel method and demonstrated to have superior photocatalytic activity for the photodegradation of gaseous trichloroethylene (TCE) under visible light (VL) irradiation from a xenon lamp equipped with 422-nm cut-off filter. Kinetic studies were performed to clarify the effect of the doping amounts, space times, VL intensity, and mole fractions of TCE, O₂, and H₂O on the degradation of TCE. Under ultraviolet (UV) irradiation, the photocatalytic activity of Pt–TiO₂ was the same as that of TiO₂, indicating that the doped Pt ion did not act as a recombination center for the photogenerated holes and electrons. Based on the kinetic data and reaction products, we conclude that the photocatalytic degradation of TCE on Pt–TiO₂ under VL irradiation proceeds similarly to TiO₂ under UV irradiation. We also performed the photocatalytic degradation of TCE at the space time of 7.5 × 10⁷ g s mol^?1 in a tubular reactor packed with the Pt–TiO₂ pellets which are more suitable than the Pt–TiO₂ powder for the practical remediation of the contaminated gas. TCE was completely degraded, i.e. 100% conversion was achieved under VL irradiation but only a small quantity of CO₂ was formed with the stoichiometric ratio of [CO₂]_formed/[TCE]_degraded of ca. 0.33. By switching the gas stream containing TCE to humid air, more CO₂ was formed, indicating that the dichloroacetates accumulated on the Pt–TiO₂ surface are photodegradable to CO₂ under VL irradiation.     

Natural Soft/Rigid Superlattices as Anodes for High‐Performance Lithium‐Ion Batteries

Volume expansion and poor conductivity are two major obstacles that hinder the pursuit of the lithium‐ion batteries with long cycling life and high power density. Herein, we highlight a misfit compound PbNbS₃ with a soft/rigid superlattice structure, confirmed by scanning tunneling microscopy and electrochemical characterization, as a promising anode material for high performance lithium‐ion batteries with optimized capacity, stability, and conductivity. The soft PbS sublayers primarily react with lithium, endowing capacity and preventing decomposition of the superlattice structure, while the rigid NbS₂ sublayers support the skeleton and enhance the migration of electrons and lithium ions, as a result leading to a specific capacity of 710 mAh g^?1 at 100 mA g^?1, which is 1.6 times of NbS₂ and 3.9 times of PbS. Our finding reveals the competitive strategy of soft/rigid structure in lithium‐ion batteries and broadens the horizons of single‐phase anode material design.     

Metal‐like Ductility in Organic Plastic Crystals: Role of Molecular Shape and Dihydrogen Bonding Interactions in Aminoboranes

Ductility is a common phenomenon in many metals but is difficult to achieve in molecular crystals. Organic crystals bend plastically on one or two face‐specific directions but fracture when stressed in any other arbitrary directions. An exceptional metal‐like ductility and malleability in the isomorphous crystals of two globular molecules, BH₃NMe₃ and BF₃NMe₃, is reported, with characteristic tensile stretching, compression, twisting, and thinning. The mechanically deformed samples, which transition to lower symmetry phases, retain good long‐range order amenable to structure determination by single‐crystal X‐ray diffraction. Molecules in these high‐symmetry crystals interact through electrostatic forces (B^??N⁺) to form columnar structures with multiple slip planes and weak dispersive forces between columns. On the other hand, the limited number of facile slip planes and strong dihydrogen bonding in BH₃NHMe₂ negates ductility. Our study has implications for the design of soft ferroelectrics, solid electrolytes, barocalorics, and soft robotics.     

Redox‐Filled Carbon‐Fiber Microelectrodes for Single‐Cell Exocytosis

Carbon‐fiber microelectrodes (CFEs) are the primary electroanalytical tool in single‐cell exocytosis and in vivo studies. Here we report a new study on the kinetic properties of electrolyte‐filled CFEs in single‐cell measurements and demonstrate that the addition of outer sphere redox species, such as Fe(CN)₆^3? and Ru(NH₃)₆³⁺, in the backfill electrolyte solution can greatly enhance the kinetic response of CFEs. We show that at 750 mV, a voltage normally applied for detection of dopamine, the presence of fast outer sphere redox species in the backfilling solution significantly enhances the kinetic response of CFEs toward fast dopamine detection at single PC12 cells. Moreover, we also demonstrate that the use of Fe(CN)₆^3? in the backfilling solution has enabled direct measurement of dopamine at applied voltages as low as 200 mV. This kinetic enhancement is believed to be due to faster electron‐transfer kinetics on the coupling pole as compared to the sluggish reduction of oxygen. We anticipate that such redox‐filled CFE ultramicroelectrodes will find many useful applications in single cell exocytosis and in vivo sensing.     

Oxygen Reduction Mediated by Single Nanodroplets Containing Attomoles of Vitamin B12: Electrocatalytic Nano‐Impacts Method

We report the use of single Vitamin B₁₂ nanodroplets to mediate the reduction of oxygen in neutral buffer. Electron transfer to single Vitamin B₁₂ nanodroplets is observed using the nano‐impacts method and shown to be quantitative. The mechanism of mediated oxygen reduction by single VB₁₂ droplets is revealed as via both Co^II and Co^I reduced from Co^III in VB₁₂ through one or two electron transfer followed by the four‐electron reduction of oxygen.     

Selective Boryl‐Anion Migration in a Vinyl sp2−sp3 Diborane Induced by Soft Borane Lewis Acids

An intramolecular 1,2‐boryl‐anion migration from boron to carbon has been achieved by selective activation of the π system in [(vinyl)B₂Pin₂)]^? using “soft” BR₃ electrophiles (BR₃=BPh₃ or 9‐aryl‐BBN). The soft character is key to ensure 1,2‐migration proceeds instead of oxygen coordination/B?O activation. The BR₃‐induced 1,2‐boryl‐anion migration represents a triple borylation of a vinyl Grignard reagent using only B₂Pin₂ and BR₃ and forms differentially protected 1,1,2‐triborylated alkanes. Notably, by increasing the steric bulk at the β position of the vinyl Grignard reagent used to activate B₂Pin₂, 1,2‐boryl‐anion migration can be suppressed in favor of intermolecular {BPin}^? transfer to BPh₃, thus enabling simple access to unsymmetrical sp²?sp³ diboranes.     

Thermal Expansion,Anharmonicity and Temperature‐Dependent Raman Spectra of Single‐ and Few‐Layer MoSe2 and WSe2

We report the temperature‐dependent Raman spectra of single‐ and few‐layer MoSe₂ and WSe₂ in the range 77–700 K. We observed linear variation in the peak positions and widths of the bands arising from contributions of anharmonicity and thermal expansion. After characterization using atomic force microscopy and high‐resolution transmission electron microscopy, the temperature coefficients of the Raman modes were determined. Interestingly, the temperature coefficient of the A²_2u mode is larger than that of the A_1g mode, the latter being much smaller than the corresponding temperature coefficients of the same mode in single‐layer MoS₂ and of the G band of graphene. The temperature coefficients of the two modes in single‐layer MoSe₂ are larger than those of the same modes in single‐layer WSe₂. We have estimated thermal expansion coefficients and temperature dependence of the vibrational frequencies of MoS₂ and MoSe₂ within a quasi‐harmonic approximation, with inputs from first‐principles calculations based on density functional theory. We show that the contrasting temperature dependence of the Raman‐active mode A_1g in MoS₂ and MoSe₂ arises essentially from the difference in their strain–phonon coupling.     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Reversible Assembly of Microgels by Metallo‐Supramolecular Chemistry

The combination of supramolecular chemistry and soft colloids as microgels represents an ambitious way to develop multi‐versatile colloidal assemblies. Hereafter, terpyridine‐functionalized poly(N‐isopropylacrylamide) (PNiPAM) microgel building blocks are shown to undergo an assemble–freeze–disassemble process. The microgel assemblies, which are controlled by monitoring the attractive and repulsive potentials between the soft colloidal particles, are then frozen by forming inter‐particle metal–terpyridine bis‐complexes upon addition of the metallic cation (such as Fe^II, Co^II). By oxidation of the metal–terpyridine bis‐complex links, the aggregates open up, which is due to the complex dissociation releasing the connected particles in the form of single microgels. We extended our work to the development of 1D filaments and 2D membranes materials made of soft particles connected via supramolecular chemistry.     

Controlled Orthogonal Self‐Assembly of Heterometal‐Decorated Coordination Cages

Multiple orthogonal coordinative interactions were utilized to construct heterometal‐decorated tetrahedral cages from in situ formed trinuclear Zr^IV clusters through the combination with other metal ions such as Cu^II or Pd^II. Through effective use of the hard/soft acid/base principle, the orthogonal self‐assembly process of Zr‐bpydc‐CuCl₂ (H₂bpydc=2,2‐bipyridine‐5,5‐dicarboxylic acid) can be finely controlled using three strategies: post‐synthetic metallization, a stepwise metalloligand approach, or a one‐pot reaction.     

Duplex‐Selective Ruthenium‐Based DNA Intercalators

We report the design and synthesis of small molecules that exhibit enhanced luminescence in the presence of duplex rather than single‐stranded DNA. The local environment presented by a well‐known [Ru(dipyrido[3,2‐a:2′,3′‐c]phenazine)L₂]²⁺‐based DNA intercalator was modified by functionalizing the bipyridine ligands with esters and carboxylic acids. By systematically varying the number and charge of the pendant groups, it was determined that decreasing the electrostatic interaction between the intercalator and the anionic DNA backbone reduced single‐strand interactions and translated to better duplex specificity. In studying this class of complexes, a single Ru^II complex emerged that selectively luminesces in the presence of duplex DNA with little to no background from interacting with single‐stranded DNA. This complex shows promise as a new dye capable of selectively staining double‐ versus single‐stranded DNA in gel electrophoresis, which cannot be done with conventional SYBR dyes.     

Synthese,Strukturen, EPR‐ und ENDOR‐spektroskopische Untersuchungen an Übergangsmetallkomplexen von N,N‐Diisobutyl‐N′‐(2, 6‐difluor)benzoylselenoharnstoff

Synthesis, Structures, EPR and ENDOR Investigations on Transition Metal Complexes of N, N‐diisobutyl‐N′‐(2, 6‐difluoro)benzoyl selenourea The synthesis and the structures of the Ni^II and Pd^II complexes of the ligand N, N‐diisobutyl‐N′‐(2, 6‐difluoro)benzoylselenourea HBuⁱ₂dfbsu are reported. The ligands coordinate bidentately forming bis‐chelates. The structure of the ligand could not be obtained, however, the structure of its O‐ethyl ester will be reported. Attempts to prepare the Cu^II complex result only in the formation of oily products. However, the Cu^II complex could be incorporated into the corresponding Ni^II and Pd^II compounds. From this diamagnetically diluted powder and single‐crystal samples were obtained being suitable for EPR‐ENDOR measurements. We report X‐ and Q‐band EPR investigations on the systems [Cu/Ni(Buⁱ₂dfbsu)₂] and [Cu/Pd(Buⁱ₂dfbsu)₂] as well as a single‐crystal X‐band EPR study for [Cu/Ni(Buⁱ₂dfbsu)₂]. The obtained ^{63, 65}Cu and ⁷⁷Se hyperfine structure tensors allow a determination of the spin‐density distribution within the first coordination sphere. In addition, orientation selective ¹⁹F Q‐band pulse ENDOR investigations on powder‐samples of [Cu/Ni(Buⁱ₂dfbsu)₂] have been performed. The hyperfine structure tensors of two intramolecular ¹⁹F atoms could be determined. According to the small ¹⁹F couplings only a vanishingly small spin‐density of < 1 % was obtained for these ¹⁹F atoms.     

A Janus‐Headed Lewis Superacid: Simple Access to,and First Application of Me3Si‐F‐Al(ORF)3

Upon reaction of gaseous Me₃SiF with the in situ prepared Lewis acid Al(OR^F)₃, the stable ion‐like silylium compound Me₃Si‐F‐Al(OR^F)₃ 1 forms. The Janus‐headed 1 is a readily available smart Lewis acid that differentiates between hard and soft nucleophiles, but also polymerizes isobutene effectively. Thus, in reactions of 1 with soft nucleophiles (Nu), such as phosphanes, the silylium side interacts in an orbital‐controlled manner, with formation of [Me₃Si?Nu]⁺ and the weakly coordinating [F?Al(OR^F)₃]^– or [(^FRO)₃Al‐F‐Al(OR^F)₃]^– anions. If exchanged for hard nucleophiles, such as primary alcohols, the aluminum side reacts in a charge‐controlled manner, with release of FSiMe₃ gas and formation of the adduct R(H)O?Al(OR^F)₃. Compound 1 very effectively initiates polymerization of 8 to 21 mL of liquid C₄H₈ in 50 mL of CH₂Cl₂ already at temperatures between ?57 and ?30 °C with initiator loads as low as 10 mg in a few seconds with 100 % yield but broad polydispersities.     

Temperature‐Induced Structure Reconstruction to Prepare a Thermally Stable Single‐Atom Platinum Catalyst

Single‐atom noble metals on a catalyst support tend to migrate and agglomerate into nanoparticles owing to high surface free energy at elevated temperatures. Temperature‐induced structure reconstruction of a support can firmly anchor single‐atom Pt species to adapt to a high‐temperature environment. We used Mn₃O₄ as a restructurable support to load single‐atom Pt and further turned into single‐atom Pt‐on‐Mn₂O₃ catalyst via high‐temperature treatment, which is extremely stable under calcination conditions of 800 °C for 5 days in humid air. High‐valence Pt⁴⁺ with more covalent bonds on Mn₂O₃ are essential for anchoring isolated Pt atoms by strong interaction. An optimized catalyst formed by moderate H₂O₂ etching exhibits the best performance and excellent thermal stability of single‐atom Pt in high‐temperature CH₄ oxidation on account of more exposed Pt atoms and strong Pt‐Mn₂O₃ interaction.     

Multi‐Electron Reactions Enabled by Anion‐Based Redox Chemistry for High‐Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi‐electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single‐electron transfer, which are not ideal for multivalent‐ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope‐like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two‐electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g^?1 at a current density of 100 mA g^?1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg^?1 for RMBs and >500 Wh kg^?1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Adsorption behaviour of a CdII–triazole MOF for butan‐2‐one in a single‐crystal‐to‐single‐crystal (SCSC) fashion: the role of hydrogen bonding and C—H…π interactions

The adsorption behaviour of the Cd^II–MOF {[Cd(L)₂(ClO₄)₂]·H₂O ( 1 ), where L is 4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole, for butan‐2‐one was investigated in a single‐crystal‐to‐single‐crystal (SCSC) fashion. A new host–guest system that encapsulated butan‐2‐one molecules, namely poly[[bis{μ₃‐4‐amino‐3,5‐bis[3‐(pyridin‐4‐yl)phenyl]‐1,2,4‐triazole}cadmium(II)] bis(perchlorate) butanone sesquisolvate], {[Cd(C₂₄H₁₈N₆)₂](ClO₄)₂·1.5C₄H₈O}_n, denoted C₄H₈O@Cd‐MOF ( 2 ), was obtained via an SCSC transformation. MOF 2 crystallizes in the tetragonal space group P4₃2₁2. The specific binding sites for butan‐2‐one in the host were determined by single‐crystal X‐ray diffraction studies. N—H…O and C—H…O hydrogen‐bonding interactions and C—H…π interactions between the framework, ClO₄^? anions and guest molecules co‐operatively bind 1.5 butan‐2‐one molecules within the channels. The adsorption behaviour was further evidenced by ¹H NMR, IR, TGA and powder X‐ray diffraction experiments, which are consistent with the single‐crystal X‐ray analysis. A ¹H NMR experiment demonstrates that the supramolecular interactions between the framework, ClO₄^? anions and guest molecules in MOF 2 lead to a high butan‐2‐one uptake in the channel.     

Exo Diels–Alder adducts between ortho‐ and para‐N‐acetoxy­phenyl­male­imides and furan

In exo‐2‐(3,5‐dioxo‐10‐oxa‐4‐aza­tri­cyclo­[5.2.1.0^2,6]­dec‐8‐en‐4‐yl)­phenyl acetate, C₁₆H₁₃NO₅, the plane of the acetoxy group lies almost perpendicular to that of the phenyl ring [dihedral angle = 89.8 (1)°], in contrast with the smaller deviations found in the para isomer exo‐4‐(3,5‐dioxo‐10‐oxa‐4‐aza­tri­cyclo­[5.2.1.0^2,6]­dec‐8‐en‐4‐yl)­phenyl acetate, C₁₆H₁₃NO₅, these being 63.6 (1) and 37.0 (1)° for the two crystallographically independent mol­ecules. Irrespective of the position of the acetoxy group, both compounds pack through soft C—H⋯X (X is O or phenyl) interactions, forming interlinked centrosymmetric tetramers in the bc plane.