αvβ3‐ or α5β1‐Integrin‐Selective Peptidomimetics for Surface Coating

Engineering biomaterials with integrin‐binding activity is a very powerful approach to promote cell adhesion, modulate cell behavior, and induce specific biological responses at the surface level. The aim of this Review is to illustrate the evolution of surface‐coating molecules in this field: from peptides and proteins with relatively low integrin‐binding activity and receptor selectivity to highly active and selective peptidomimetic ligands. In particular, we will bring into focus the difficult challenge of achieving selectivity between the two closely related integrin subtypes αvβ3 and α5β1. The functionalization of surfaces with such peptidomimetics opens the way for a new generation of highly specific cell‐instructive surfaces to dissect the biological role of integrin subtypes and for application in tissue engineering and regenerative medicine.     

Overcoming the Lack of Oral Availability of Cyclic Hexapeptides: Design of a Selective and Orally Available Ligand for the Integrin αvβ3

A highly systematic approach for the development of both orally bioavailable and bioactive cyclic N‐methylated hexapeptides as high affinity ligands for the integrin αvβ3 is based on two concepts: a) screening of systematically designed libraries with spatial diversity and b) masking of the peptide charge with a lipophilic protecting group. The key steps of the method are 1) initial design of a combinatorial library of N‐methylated analogues of the stem peptide cyclo(d ‐Ala‐Ala₅); 2) selection of cyclic peptides with the highest intestinal permeability; 3) design of sublibraries with the bioactive RGD sequence in all possible positions; 4) selection of the best ligands for RGD‐recognizing integrin subtypes; 5) fine‐tuning of the affinity and selectivity by additional Ala to Xaa substitutions; 6) protection of the charged functional groups according to the prodrug concept to regain intestinal and oral permeability; 7) proof of biological effects in mice after oral administration.     

An αv‐RGD Integrin Inhibitor Toolbox: Drug Discovery Insight,Challenges and Opportunities

There is a requirement for efficacious and safe medicines to treat diseases with high unmet need. The resurgence in αv‐RGD integrin inhibitor drug discovery is poised to contribute to this requirement. However, drug discovery in the αv integrin space is notoriously difficult due to the receptors being structurally very similar as well as the polar zwitterionic nature of the pharmacophore. This Review aims to guide drug discovery research in this field through an αv inhibitor toolbox, consisting of small molecules and antibodies. Small‐molecule αv tool compounds with extended profiles in αvβ1, 3, 5, 6 and 8 cell adhesion assays, with key physicochemical properties, have been collated to assist in the selection of the right tool for the right experiment. This should also facilitate an understanding of partial selectivity profiles of compounds generated in different assays across research institutions. Prospects for further αv integrin research and the critical importance of target validation are discussed, where increased knowledge of the selectivity for individual RGD αv integrins is key. Insights into the design of small‐molecule RGD chemotypes for topical or oral administration are provided and clinical findings on advanced molecules are examined.     

Artificial β‐Double Helices from Achiral γ‐Peptides

Double helices are not common in polypeptides and proteins except in the peptide antibiotic gramicidin A and analogous l,d ‐peptides. In contrast to natural polypeptides, remarkable β‐double‐helical structures from achiral γ‐peptides built from α,β‐unsaturated γ‐amino acids have been observed. The crystal structures suggest that they adopted parallel β‐double helical structures and these structures are stabilized by the interstrand backbone amide H‐bonds. Furthermore, both NMR spectroscopy and fluorescence studies support the existence of double‐helical conformations in solution. Although a variety of folded architectures featuring distinct H‐bonds have been discovered from the β‐ and γ‐peptide foldamers, this is the first report to show that achiral γ‐peptides can spontaneously intertwine into β‐double helical structures.     

Small Cause,Great Impact: Modification of the Guanidine Group in the RGD Motif Controls Integrin Subtype Selectivity

Due to its unique role as a hydrogen‐bond donor and its positive charge, the guanidine group is an important pharmacophoric group and often used in synthetic ligands. The chemical modification of the guanidine group is often considered to destroy its function. Herein, we show that the N‐methylation, N‐alkylation, or N‐acylation of the guanidine group can be used to modify the receptor subtype specificity of the integrin ligand cilengitide. Using the αvβ6/α5β1‐biselective ligand c(isoDGRkphg) and the αvβ6‐specific ligand c(FRGDLAFp(NMe)K(Ac) as examples, we show that the binding affinities of the ligands can be fine‐tuned by this method to enhance the selectivity for αvβ6. Furthermore, we describe a new strategy for the functionalization of integrin ligands. By introducing longer N‐alkylguanidine and N‐acylguanidine groups, we are able to simultaneously identify a hitherto unknown anchoring point and enhance the subtype selectivity of the ligand.     

Biointeraction analysis of carbamazepine binding to α1‐acid glycoprotein by high‐performance affinity chromatography

Interactions of the drug carbamazepine with the serum protein α₁‐acid glycoprotein (AGP) were examined by high‐performance affinity chromatography. Frontal analysis studies with an immobilized AGP column and control column indicated carbamazepine had both low‐affinity interactions with the support and high‐affinity interactions with AGP. When a correction was made for binding to the support, the association equilibrium constant measured at pH 7.4 and 37°C for carbamazepine with AGP was 1.0 (±0.1)×10⁵ M^?1, with values that ranged from 5.1 to 0.58×10⁵ M^?1 in going from 5 to 45°C. It was found in competition studies that these interactions were occurring at the same site that binds propranolol on AGP. Temperature studies indicated that the change in enthalpy was the main driving force for the binding of carbamazepine to AGP. These results provide a more complete picture of how carbamazepine binds to AGP in serum. This report also illustrates how high‐performance affinity chromatography can be used to examine biological interactions and drug–protein binding in situations in which significant interactions for an analyte are present with both the chromatographic support and an immobilized ligand.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Insights into docking and scoring neuronal α4β2 nicotinic receptor agonists using molecular dynamics simulations and QM/MM calculations

A combined quantum mechanical (QM)‐polarized docking and molecular dynamics approach to study the binding mode and to predict the binding affinity of ligands acting at the α4β2‐nAChR is presented. The results obtained in this study indicate that the quantum mechanical/molecular mechanics docking protocol well describes the charge‐driven interactions occurring in the binding of nicotinic agonists, and it is able to represent the polarization effects on the ligand exerted by the surrounding atoms of the receptor at the binding site. This makes it possible to properly score agonists of α4β2‐nAChR and to reproduce the experimental binding affinity data with good accuracy, within a mean error of 2.2 kcal/mol. Moreover, applying the QM‐polarized docking to an ensemble of nAChR conformations obtained from MD simulations enabled us to accurately capture nAChR‐ligand induced‐fit effects. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009     

12/14/14‐Helix Formation in 2:1 α/β‐Hybrid Peptides Containing Bicyclo[2.2.2]octane Ring Constraints

The highly constrained β‐amino acid ABOC induces different types of helices in β urea and 1:1 α/β amide oligomers. The latter can adopt 11/9‐ and 18/16‐helical folds depending on the chain length in solution. Short peptides alternating proteinogenic α‐amino acids and ABOC in a 2:1 α/β repeat pattern adopted an unprecedented and stable 12/14/14‐helix. The structure was established through extensive NMR, molecular dynamics, and IR studies. While the 1:1 α‐AA/ABOC helices diverged from the canonical α‐helix, the helix formed by the 9‐mer 2:1 α/β‐peptide allowed the projection of the α‐amino acid side chains in a spatial arrangement according to the α‐helix. Such a finding constitutes an important step toward the conception of functional tools that use the ABOC residue as a potent helix inducer for biological applications.     

Computational insight into asymmetric uranyl‐salophen coordinated with α, β‐unsaturated aldehydes and ketones

The study of the catalytic activity and activation mechanism of asymmetric uranyl‐salophens with α, β‐unsaturated aldehydes or α, β‐unsaturated ketones, is a research hotspot. In this paper, the complexes of the uranyl–salophen(U‐S) modified by unilateral benzene, coordinated with cyclohexenone, cyclopentenone and acrolein, were investigated using density functional theory calculations at the level of B3LYP/6‐311G(d, p) basis set. The results showed that the uranyl‐salophen(U‐S) weakened the large π bond between C = C and C = O of the α, β‐unsaturated aldehydes and ketones, making the unsaturated aldehydes and ketones activated. In addition, the molecular‐recognition selectivity of the asymmetrical uranyl‐salophen for cyclohexenone and cyclopentenone were much higher than for acrolein.     

Filaggrin Peptides with β‐Hairpin Structure Bind Rheumatoid Arthritis Antibodies

In the early detection of rheumatoid arthritis (RA) synthetic filaggrin peptides serve as antigens for rheumatoid‐specific autoantibodies (anti‐citrullinated peptide antibody, ACPA) in ELISA tests. In this work we present a peptide that exhibits the binding epitope of ACPA in the form of a stable folding β‐hairpin. The homogeneity of the peptide folding was confirmed by NMR spectroscopy and might lead to the first proposed structure of the antibody‐bound conformation of the epitope.     

Palladium‐catalyzed decarboxylative coupling of α,β‐unsaturated carboxylic acids with aryl tosylates

We report a general method for selective cross‐coupling of α,β‐unsaturated carboxylic acids with aryl tosylates enabled by versatile Pd(II) complexes. This method features the general cross‐coupling of ubiquitous α,β‐unsaturated carboxylic acids by decarboxylation. The transformation is characterized by its operational simplicity, the use of inexpensive, air‐stable Pd(II) catalysts, scalability and wide substrate scope. The reaction proceeds with high trans selectivity to furnish valuable (E)‐1,2‐diarylethenes.     

Investigation on the dynamic crystallization and melting behavior of β‐nucleated isotactic polypropylene with different stereo‐defect distribution—the role of dual‐selective β‐nucleation agent

The selectivities of different β‐nucleating agents might be quite different from each other, which is important in determining the crystallization and properties of the obtained β‐isotactic polypropylene (β‐iPP). However, the relationship between molecular structure and dynamic crystallization behavior of β‐iPP nucleated by dual‐selective β‐nucleating agent (DS‐β‐NA) is still not clear. In this study, the dynamic crystallization and melting behavior of two β‐iPP with nearly same average isotacticity but different stereo‐defect distribution, nucleated by a DS‐β‐NA (N,N′‐dicyclohexyl‐2,6‐naphthalenedicarboxamide; trade name TMB‐5), were studied by differential scanning calorimetry, wide‐angle X‐ray diffraction, and scanning electronic microscopy. The results indicated that in the presence of TMB‐5, the dynamic crystallization and melting behavior of the samples are quite different because the joint effects of the dual selectivity of TMB‐5 and stereo‐defect distribution of the iPP under different cooling rates. Two important roles were observed: (i) slow cooling rate favors the formation of high β‐fraction; and (ii) high crystallization temperature favors the crystallization of α‐phase accelerated by TMB‐5. Generally, the dual selectivity of the DS‐β‐NA, the stereo‐defect distribution of iPP, and the cooling rate were important factors in determining the formation of β‐crystal. Copyright © 2013 John Wiley & Sons, Ltd.     

Iridium‐Catalyzed Enantioselective Allylic Substitution of Unstabilized Enolates Derived from α,β‐Unsaturated Ketones

We report Ir‐catalyzed, enantioselective allylic substitution reactions of unstabilized silyl enolates derived from α,β‐unsaturated ketones. Asymmetric allylic substitution of a variety of allylic carbonates with silyl enolates gave allylated products in 62–94 % yield with 90–98 % ee and >20:1 branched‐to‐linear selectivity. The synthetic utility of this method was illustrated by the short synthesis of an anticancer agent, TEI‐9826.     

Improved efficacy of bio‐mineralization of human mesenchymal stem cells on modified PLLA nanofibers coated with bioactive materials via enhanced expression of integrin α2β1

Current therapeutic interventions in bone defects are mainly focused on finding the best bioactive materials for inducing bone regeneration via activating the related intracellular signaling pathways. Integrins are trans‐membrane receptors that facilitate cell‐extracellular matrix (ECM) interactions and activate signal transduction. To develop a suitable platform for supporting human bone marrow mesenchymal stem cells (hBM‐MSCs) differentiation into bone tissue, electrospun poly L‐lactide (PLLA) nanofiber scaffolds were coated with nano‐hydroxyapatite (PLLA/nHa group), gelatin nanoparticles (PLLA/Gel group), and nHa/Gel nanoparticles (PLLA/nHa/Gel group) and their impacts on cell proliferation, expression of osteoblastic biomarkers, and bone differentiation were examined and compared. MTT data showed that proliferation of hBM‐MSCs on PLLA/nHa/Gel scaffolds was significantly higher than other groups (P < .05). Alkaline phosphatase activity was also more increased in hBM‐MSCs cultured under osteogenic media on PLLA/nHa/Gel scaffolds compared to others. Gene expression evaluation confirmed up‐regulation of integrin α2β1 as well as the osteogenic genes BGLAP, COL1A1, and RUNX2. Following use of integrin α2β1 blocker antibody, the protein level of integrin α2β1 in cells seeded on PLLA/nHa/Gel scaffolds was decreased compared to control, which confirmed that most of the integrin receptors were bound to gelatin molecules on scaffolds and could activate the integrin α2β1/ERK axis. Collectively, PLLA/nHa/Gel scaffold is a suitable platform for hBM‐MSCs adhesion, proliferation, and osteogenic differentiation in less time via activating integrin α2β1/ERK axis, and thus it might be applicable in bone tissue engineering.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Selective 17‐β‐estradiol molecular imprinting

An efficient novel method for the synthesis of a covalent molecularly imprinted polymer (MIP) highly specific to β‐estradiol have been developed. MIP prepared by both covalent and non covalent techniques, demonstrated high selectivity toward β‐estradiol. MIPs were synthesized by radical polymerization of 17‐β‐estradiol 4‐vinyl‐benzene carboxyl or sulfonyl esters used as covalent functional monomers, methacrylic acid as noncovalent functional monomer, ethylene glycol dimethacrylate as crosslinking agent, and acetonitrile as swelling and porogenic component. Almost 35% (w/w) of 17‐β‐estradiol was successfully removed from the polymer network by basic hydrolysis. The binding ability of MIP was 10.73 μg/mg MIP following removal of 17‐β‐estradiol in the 2 mg/mL β‐estradiol solution. Selective rebinding of β‐estradiol toward MIP was tested in the presence of competitive binders including estrone, 19‐nortestosterone, epiandrosterone, and cholesterol. Estrone having closest similar chemical structure to β‐estradiol exhibited only 0.6 μg/mg MIP competitive binding, being exposed to equivalent concentrations. Moreover, other competitive steroids demonstrated negligible affinity toward MIP indicating high selectivity of novel MIP system toward β‐estradiol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5534–5542, 2009     

A Supramolecular Stabilizer of the 14‐3‐3ζ/ERα Protein‐Protein Interaction with a Synergistic Mode of Action

We report on a stabilizer of the interaction between 14‐3‐3ζ and the Estrogen Receptor alpha (ERα). ERα is a driver in the majority of breast cancers and 14‐3‐3 proteins are negative regulators of this nuclear receptor, making the stabilization of this protein‐protein interaction (PPI) an interesting strategy. The stabilizer ( 1 ) consists of three symmetric peptidic arms containing an arginine mimetic, previously described as the GCP motif. 1 stabilizes the 14‐3‐3ζ/ERα interaction synergistically with the natural product Fusicoccin‐A and was thus hypothesized to bind to a different site. This is supported by computational analysis of 1 binding to the binary complex of 14‐3‐3 and an ERα‐derived phosphopeptide. Furthermore, 1 shows selectivity towards 14‐3‐3ζ/ERα interaction over other 14‐3‐3 client‐derived phosphomotifs. These data provide a solid support of a new binding mode for a supramolecular 14‐3‐3ζ/ERα PPI stabilizer.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Secondary Amine‐Catalyzed Asymmetric γ‐Alkylation of α‐Branched Enals via Dienamine Activation

The direct and enantioselective γ‐alkylation of α‐substituted α,β‐unsaturated aldehydes proceeding under dienamine catalysis is described. We have found that the Seebach modification of the diphenyl‐prolinol silyl ether catalyst in combination with saccharin as an acidic additive promotes an S_N1 alkylation pathway, while ensuring complete γ‐site selectivity and a high stereocontrol. Theoretical and spectroscopic investigations have provided insights into the conformational behavior of the covalent dienamine intermediate derived from the condensation of 2‐methylpent‐2‐enal and the chiral amine. Implications for the mechanism of stereoinduction are discussed.