Graphitic C3N4‐Sensitized TiO2 Nanotube Layers: A Visible‐Light Activated Efficient Metal‐Free Antimicrobial Platform

Herein, we use a facile procedure to graft a thin graphitic C₃N₄ (g‐C₃N₄) layer on aligned TiO₂ nanotube arrays (TiNT) by a one‐step chemical vapor deposition (CVD) approach. This provides a platform to enhance the visible‐light response of TiO₂ nanotubes for antimicrobial applications. The formed g‐C₃N₄/TiNT binary nanocomposite exhibits excellent bactericidal efficiency against Escherichia coli (E. coli) as a visible‐light activated antibacterial coating, without the use of additional bactericides.     

Photo‐Modulated Therapeutic Protein Release from a Hydrogel Depot Using Visible Light

The use of biomacromolecular therapeutics has revolutionized disease treatment, but frequent injections are required owing to their short half‐life in vivo. Thus there is a need for a drug delivery system that acts as a reservoir and releases the drug remotely “on demand”. Here we demonstrate a simple light‐triggered local drug delivery system through photo‐thermal interactions of polymer‐coated gold nanoparticles (AuNPs) inside an agarose hydrogel as therapeutic depot. Localized temperature increase induced by the visible light exposure caused reversible softening of the hydrogel matrix to release the pre‐loaded therapeutics. The release profile can be adjusted by AuNPs and agarose concentrations, light intensity and exposure time. Importantly, the biological activity of the released bevacizumab was highly retained. In this study we demonstrate the potential application of this facile AuNPs/hydrogel system for ocular therapeutics delivery through its versatility to release multiple biologics, compatibility to ocular cells and spatiotemporal control using visible light.     

The Synthesis and Photocatalytic Properties of TiO2 Nanotube Array by Starch‐Modified Anodic Oxidation

In this study, the characterization and photocatalytic activity of TiO₂ nanotube arrays prepared by anodization process with starch addition were investigated in detail. The results suggested that the optimum mass fraction of starch added in anodization process was 0.1%, with which TiO₂ nanotube arrays owning good tubular structure were synthesized. The tube length and average inner diameter of nanotubes were approximately 4 μm and 30 nm, respectively. Through the characterization of TiO₂ nanotube arrays by energy dispersive spectrometer, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Fourier Transform Infrared (FTIR) spectroscopy, it was found that the as‐prepared nanotubes possessed well uniformed and higher photodegradation responsive than the pure TiO₂. Moreover, it was expected that the as‐prepared nanotubes exhibited good photocatalytic activity for the degradation of RhB under UV‐light irradiation, which could be ascribed to their good morphology, enhanced UV‐light absorption property and electron transmission ability during the photocatalytic reaction. In addition, the nanotubes were not significantly regenerated during the cycling runs experiment. Overall, this study could provide a principle method to synthesize TiO₂ nanotube arrays with enhanced photocatalytic activity by anodization process with starch addition for environmental purification.     

Magneto‐Plasmonic Janus Vesicles for Magnetic Field‐Enhanced Photoacoustic and Magnetic Resonance Imaging of Tumors

Magneto‐plasmonic Janus vesicles (JVs) integrated with gold nanoparticles (AuNPs) and magnetic NPs (MNPs) were prepared asymmetrically in the membrane for in vivo cancer imaging. The hybrid JVs were produced by coassembling a mixture of hydrophobic MNPs, free amphiphilic block copolymers (BCPs), and AuNPs tethered with amphiphilic BCPs. Depending on the size and content of NPs, the JVs acquired spherical or hemispherical shapes. Among them, hemispherical JVs containing 50 nm AuNPs and 15 nm MNPs showed a strong absorption in the near‐infrared (NIR) window and enhanced the transverse relaxation (T₂) contrast effect, as a result of the ordering and dense packing of AuNPs and MNPs in the membrane. The magneto‐plasmonic JVs were used as drug delivery vehicles, from which the release of a payload can be triggered by NIR light and the release rate can be modulated by a magnetic field. Moreover, the JVs were applied as imaging agents for in vivo bimodal photoacoustic (PA) and magnetic resonance (MR) imaging of tumors by intravenous injection. With an external magnetic field, the accumulation of the JVs in tumors was significantly increased, leading to a signal enhancement of approximately 2–3 times in the PA and MR imaging, compared with control groups without a magnetic field.     

Hierarchical TiO2 nanosheet‐assembled nanotubes with dual electron sink functional sites for efficient photocatalytic degradation of rhodamine B

A novel Pt–TiO₂/Ag nanotube photocatalyst has been synthesized successfully via a facile method. TiO₂ nanotubes are assembled with numerous ultrathin TiO₂ nanosheets and show a highly open structure. The gaps between adjacent TiO₂ nanosheets can serve as channels for the access of reactants, accelerating the mass transfer process. During the fabrication process of the Pt–TiO₂/Ag nanotube photocatalyst, high‐quality Pt–SiO₂ nanotubes are synthesized first with the structure‐directing effect of polyvinylpyrrolidone. Then a TiO₂ layer is coated on the outside surface of the silica nanotubes. The introduced titanium species can be converted into TiO₂ nanosheet structure during the subsequent hydrothermal treatment, gradually constructing nanosheet‐assembled nanotubes. Lastly, after the introduction of another electron sink function site of Ag through UV irradiation, the Pt–TiO₂/Ag nanotube photocatalyst with dual electron sink functional sites is obtained. The specially doped Pt and Ag NPs can simultaneously inhibit the recombination process of photogenerated charge carriers and increase light utilization efficiency. Therefore, the as‐synthesized Pt–TiO₂/Ag nanotube catalyst exhibits a high photocatalytic degradation performance for rhodamine B of 0.2 min^?1, which is about 3.2 and 5.3 times as high as that of Pt–TiO₂ and TiO₂ nanotubes because of the enhanced charge carrier separation efficiency. Furthermore, in the unique nanoarchitecture, the nanotubes are assembled with numerous ultrathin TiO₂ nanosheets, which can absorb abundant active species and dye molecules for photocatalytic reaction. On the basis of experimental results, a possible rhodamine B degradation mechanism is proposed to explain the excellent photocatalytic efficiency of the Pt–TiO₂/Ag nanotube photocatalyst.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

TiO2 Nanotube Arrays Modified with Cr‐Doped SrTiO3 Nanocubes for Highly Efficient Hydrogen Evolution under Visible Light

In recent decades, solar‐driven hydrogen production over semiconductors has attracted tremendous interest owing to the global energy and environmental crisis. Among various semiconductor materials, TiO₂ exhibits outstanding photocatalytic properties and has been extensively applied in diverse photocatalytic and photoelectric systems. However, two major drawbacks limit practical applications, namely, high charge‐recombination rate and poor visible‐light utilization. In this work, heterostructured TiO₂ nanotube arrays grafted with Cr‐doped SrTiO₃ nanocubes were fabricated by simply controlling the kinetics of hydrothermal reactions. It was found that coupling TiO₂ nanotube arrays with regular SrTiO₃ nanocubes can significantly improve the charge separation. Meanwhile, doping Cr cations into SrTiO₃ nanocubes proved to be an effective and feasible approach to enhance remarkably the visible‐light response, which was also confirmed by theoretical calculations. As a result, the rate of photoelectrochemical hydrogen evolution of these novel heteronanostructures is an order of magnitude larger than those of TiO₂ nanotube arrays and other previously reported SrTiO₃/TiO₂ nanocomposites under visible‐light irradiation. Furthermore, the as‐prepared Cr‐doped SrTiO₃/TiO₂ heterostructures exhibit excellent durability and stability, which are favorable for practical hydrogen production and photoelectric nanodevices.     

Synthesis of Bi-doped TiO2 Nanotubes and Enhanced Photocatalytic Activity for Hydrogen Evolution from Glycerol Solution

Bi‐doped TiO₂ nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^?1 NaOH (aq.) through using Bi‐doped TiO₂ particles derived from conventional sol‐gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO₂ nanotubes were investigated. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS) observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi³⁺. Bi‐doping TiO₂ nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO₂ nanotubes. There was an optimal Bi‐doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nanobelt, which in turn decreases the photocatlytic activity for hydrogen evolution.     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

Three‐Dimensional Ordered Assembly of Thin‐Shell Au/TiO2 Hollow Nanospheres for Enhanced Visible‐Light‐Driven Photocatalysis

An Au/TiO₂ nanostructure was constructed to obtain a highly efficient visible‐light‐driven photocatalyst. The design was based on a three‐dimensional ordered assembly of thin‐shell Au/TiO₂ hollow nanospheres (Au/TiO₂‐3 DHNSs). The designed photocatalysts exhibit not only a very high surface area but also photonic behavior and multiple light scattering, which significantly enhances visible‐light absorption. Thus Au/TiO₂‐3 DHNSs exhibit a visible‐light‐driven photocatalytic activity that is several times higher than conventional Au/TiO₂ nanopowders.     

Shape‐ and Functionality‐Controlled Organization of TiO2–Porphyrin–C60 Assemblies for Improved Performance of Photochemical Solar Cells

Shape‐ and functionality‐controlled organization of porphyrin derivatives–C₆₀ supramolecular assemblies using TiO₂ nanotubes and nanoparticles has been achieved for the development of photochemical solar cells. The differences in the efficiency of light‐energy conversion of these solar cells are explained on the basis of the geometrical orientation of the porphyrins with respect to the TiO₂ surface and the supramolecular complex formed with C₆₀. The maximum photon‐conversion efficiency (IPCE) of 60 % obtained with TiO₂ nanotube architecture is higher than the value obtained with nanoparticle architecture. The results presented in this study show the importance of substrate morphology in promoting electron transport within the mesoscopic semiconductor film.     

Free‐Standing Membranes to Study the Optical Properties of Anodic TiO2 Nanotube Layers

In the present work we investigate various optical properties (such as light absorption and reflectance) of anodic TiO₂ nanotube layers directly transferred as self‐standing membranes onto quartz substrates. This allows investigation in a transmission geometry which provides significantly more reliable data than measurements on the metallic Ti substrate. Light transmission and reflectance measurements were carried out for layers of thickness varying from 1.8 to 50 μm, and the layers were investigated in their amorphous and crystalline forms. A series of wavelength‐dependent light attenuation coefficients are extrapolated and found to match the photocurrent versus irradiation wavelength behavior. A feature specific to anodic nanotubes is that their intrinsic carbon contamination content causes a proportional sub‐bandgap response. Overall, the extracted data provide a valuable basis and understanding for the design of photo‐electrochemical devices based on TiO₂ nanotubes.     

A Visible‐Light Driven Photoelectrochemical Aptasensor for Endocrine Disrupting Chemicals Bisphenol A with High Sensitivity and Specificity

A visible‐light driven photoelectrochemical (PEC) sensor based on aptamer immobilized TiO₂‐Fe₂O₃ nanotubes was proposed for the first time and highly sensitive and selective bisphenol A determination was realized. Taking advantage of the alloy oxide nanotube structure, high surface area, good biocompatibility, superior photoelectrocatalytic performance, a limit of detection toward BPA as low as 1.8×10^?11 M with linearity in the range from 1.8×10^?11 to 3.2×10^?9 M could be achieved. Specificity was greatly exhibited for this aptasensor under 100‐fold excess concentration of estriol, resorcinol, nonylphenol, 2,4‐D, acetamiprid, chlorpyrifos and omethoate. Simultaneously, satisfactory results were obtained in real water sample investigation from industrial plastics and drinking water. A novel visible‐light driven PEC method for highly sensitive and selective detection of BPA was thus established.     

Entrapment of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in TiO<Subscript>2</Subscript> nanotubes for visible light-driven photocatalysis

In this study, we prepared nanoparticles of the visible light-responsive photocatalyst, Bi₂O₃ entrapped in anatase TiO₂ nanotubes (Bi₂O₃-in-TNTs) via a vacuum-assisted precursor-filling process followed by annealing. Owing to the unique tubular electronic structure of TiO₂ nanotubes, the interior of the nanotube is in an electron-deficient state, which was confirmed by XPS spectra and H₂-TPR. Electrochemical impedance studies showed that the Bi₂O₃-in-TNTs demonstrated a more efficient separation of photogenerated carriers than when Bi₂O₃ nanoparticles were deposited on the outer wall of TiO₂ nanotubes (Bi₂O₃-out-TNTs). Due to the confinement effect of TiO₂ nanotubes, which inhibits photogenerated carriers’ recombination, the Bi₂O₃-in-TNTs exhibited a better photocatalytic performance for the photo-degradation of methyl orange under visible light compared to Bi₂O₃-out-TNTs.     

N‐Doped Yellow TiO2 Hollow Sphere‐Mediated Visible‐Light‐Driven Efficient Esterification of Alcohol and N‐Hydroxyimides to Active Esters

Herein we report a simple synthetic protocol for N‐doped yellow TiO₂ (N‐TiO₂) hollow spheres as an efficient visible‐light‐active photocatalyst using aqueous titanium peroxocarbonate complex (TPCC) solution as precursor and NH₄OH. In the developed strategy, the ammonium ion of TPCC and NH₄OH acts as nitrogen source and structure‐directing agent. The synthesized N‐TiO₂ hollow spheres are capable of promoting the synthesis of active esters of N‐hydroxyimide and alcohol through simultaneous selective oxidation of alcohol to aldehyde followed by cross‐dehydrogenative coupling (CDC) under ambient conditions upon irradiation of visible light. It is possible to develop a novel and cost‐effective one‐pot strategy for the synthesis of important esters and amides on gram scale using the developed strategy. The catalytic activity of N‐TiO₂ hollow spheres is much superior to that of other reported N‐TiO₂ samples as well as TiO₂ with varying morphology.     

Nickel Hydroxide Nanoparticle Activated Semi‐metallic TiO2 Nanotube Arrays for Non‐enzymatic Glucose Sensing

Semi‐metallic TiO₂ nanotube arrays (TiO_xC_y NTs) have been decorated uniformly with Ni(OH)₂ nanoparticles without the aid of a polymer binder. The resulting hybrid nanotube arrays exhibit excellent catalytic activity towards non‐enzymatic glucose electro‐oxidation. The anodic current density of the glucose oxidation is significantly improved compared with traditional TiO₂ nanotubes decorated with Ni(OH)₂. Moreover, the Ni(OH)₂/TiO_xC_y NT‐based electrode shows a fast response, high sensitivity, wide linear range, good selectivity and stability towards glucose electro‐oxidation, and thus provides a promising and cost‐effective sensing platform for non‐enzymatic glucose detection.     

Enhanced Visible‐Light‐Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

In this work, CdS sensitized TiO₂ nanotube arrays (CdS/TiO₂NTs) electrode was synthesized with the CdS deposition on the highly ordered titanium dioxide nanotube arrays (TiO₂NTs) by sequential chemical bath deposition method (S‐CBD). The as‐prepared CdS/TiO₂NTs was characterized by field‐emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD). The results indicated that the CdS nanoparticles were effectively deposited on the surface of TiO₂NTs. The amperometric I‐t curve on the CdS/TiO₂NTs electrode was also presented. It was found that the photocurrent density was enhanced significantly from 0.5 to 1.85 mA/cm² upon illumination with applied potential of 0.5 V at the central wavelength of 253.7 nm. The photoelectrocatalytic (PEC) activity of the CdS/TiO₂NTs electrode was investigated by degradation of methyl orange (MO) in aqueous solution. Compared with TiO₂NTs electrode, the degradation efficiencies of CdS/TiO₂NTs electrode increased from 78% to 99.2% under UV light in 2 h, and from 14% to 99.2% under visible light in 3 h, which was caused by effective separation of the electrons and holes due to the effect of CdS, hence inhibiting the recombination of electron/hole pairs of TiO₂NTs.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Upconverting Nanoparticles with a Mesoporous TiO2 Shell for Near‐Infrared‐Triggered Drug Delivery and Synergistic Targeted Cancer Therapy

Malignant tumors remain a major health burden throughout the world and effective therapeutic strategies are urgently needed. Herein, we report the synthesis of upconverting nanoparticles with a mesoporous TiO₂ (mTiO₂) shell for near‐infrared (NIR)‐triggered drug delivery and synergistic targeted cancer therapy. The NaGdF₄:Yb,Tm could convert NIR light to UV light, which activated the mTiO₂ to produce reactive oxygen species for photodynamic therapy (PDT). Due to the large surface area and porous structure, the mTiO₂ shell endowed the nanoplatform with another functionality of anticancer drug loading for chemotherapy. The hyaluronic acid modified on the surface not only promised controlled drug release but also conferred targeted ability of the system toward cluster determinant 44 overexpressed cancer cells. More importantly, cytotoxicity experiments demonstrated that combined therapy mediated the highest rate of death of breast carcinoma cells compared with that of single chemotherapy or PDT.     

Synthesis of Poly(2‐Hydroxyethyl Methacrylate)‐based Hybrid Nanoparticles via Visible‐Light‐Initiated Radical Polymerization

We report a new, unique process for the design of poly(2‐hydroxyethyl methacrylate) (PHEMA )‐based hybrid materials, which involves the coating of PHEMA on TiO₂ and TiO₂ /Ag nanoparticle surface under visible light. New hybrid materials initiated under different conditions were prepared under visible light, which could be used for the theoretical design of nanohybrid materials. The hybrid materials thus prepared were characterized by Fourier transform infrared spectroscopy (FTIR ), transmission electron microscopy (TEM ), and thermogravimetric analysis (TGA ). The experimental results confirmed the successful synthesis of TiO₂–PHEMA hybrid materials. Compared to other methods, the method reported here involving the direct combination of PHEMA on the TiO₂ surface was simply catalyzed by visible light without the addition of initiators.