Nanostructured Cobalt(II) Tetracarboxyphthalocyanine Complex Supported Within the MWCNT Frameworks: Electron Transport and Charge Storage Capabilities

The electrochemical redox properties of a surface‐confined thin solid film of nanostructured cobalt(II) tetracarboxyphthalocyanine integrated with multiwalled carbon nanotube (nanoCoTCPc/MWCNT) have been investigated. This novel nanoCoTCPc/MWCNT material was characterized using SEM, TEM, zeta analysis and electrochemical methods. The nanoCoTCPc/MWCNT nanohybrid material exhibited an extra‐ordinarily high conductivity (15 mS cm^?1), which is more than an order of magnitude greater than that of the MWCNT‐SO₃H (527 µS cm^?1) and three orders of a magnitude greater than the nanoCoTCPc (4.33 µS cm^?1). The heterogeneous electron transfer rate constant decreases as follows: nanoCoTCPc/MWCNT (k_app≈19.73×10^?3 cm s^?1)>MWCNT‐SO₃H (k_app≈11.63×10^?3 cm s^?1)>nanoCoTCPc (k_app≈1.09×10^?3 cm s^?1). The energy‐storage capability was typical of pseudocapacitive behaviour; at a current density of 10 µA cm^?2, the pseudocapacitance decreases as nanoCoTCPc/MWCNT (3.71×10^?4 F cm^?2)>nanoCoTCPc (2.57×10^?4 F cm^?2)>MWCNT‐SO₃H (2.28×10^?4 F cm^?2). The new nanoCoTCPc/MWCNT nanohybrid material promises to serve as a potential material for the fabrication of thin film electrocatalysts or energy‐storage devices.     

The Reaction of Sulfenic Acids with Peroxyl Radicals: Insights into the Radical‐Trapping Antioxidant Activity of Plant‐Derived Thiosulfinates

Sulfenic acids play a prominent role in biology as key participants in cellular signaling relating to redox homeostasis, in the formation of protein‐disulfide linkages, and as the central players in the fascinating organosulfur chemistry of the Allium species (e.g., garlic). Despite their relevance, direct measurements of their reaction kinetics have proven difficult owing to their high reactivity. Herein, we describe the results of hydrocarbon autoxidations inhibited by the persistent 9‐triptycenesulfenic acid, which yields a second order rate constant of 3.0×10⁶ M ^?1 s^?1 for its reaction with peroxyl radicals in PhCl at 30 °C. This rate constant drops 19‐fold in CH₃CN, and is subject to a significant primary deuterium kinetic isotope effect, k_H/k_D=6.1, supporting a formal H‐atom transfer (HAT) mechanism. Analogous autoxidations inhibited by the Allium‐derived (S)‐benzyl phenylmethanethiosulfinate and a corresponding deuterium‐labeled derivative unequivocally demonstrate the role of sulfenic acids in the radical‐trapping antioxidant activity of thiosulfinates, through the rate‐determining Cope elimination of phenylmethanesulfenic acid (k_H/k_D≈4.5) and its subsequent formal HAT reaction with peroxyl radicals (k_H/k_D≈3.5). The rate constant that we derived from these experiments for the reaction of phenylmethanesulfenic acid with peroxyl radicals was 2.8×10⁷ M ^?1 s^?1; a value 10‐fold larger than that we measured for the reaction of 9‐triptycenesulfenic acid with peroxyl radicals. We propose that whereas phenylmethanesulfenic acid can adopt the optimal syn geometry for a 5‐centre proton‐coupled electron‐transfer reaction with a peroxyl radical, the 9‐triptycenesulfenic is too sterically hindered, and undergoes the reaction instead through the less‐energetically favorable anti geometry, which is reminiscent of a conventional HAT.     

Cooperative and FRET‐Assisted Brightness Enhancement in Oligo(phenylene ethynylene): Quantum Dot Organic–Inorganic Nanohybrids

Herein, we combine the ideas of concerted emission from fluorophore ensembles and its further amplification through FRET in an organic–inorganic hybrid approach. Spherical and highly fluorescent organic nanoparticles (FONPs, Φ_f=0.38), prepared by the self‐assembly of oligo(phenylene ethynylene) (OPE) molecules, were selected as a potential donor material. This organic core was then decorated with a shell of fluorescent CdSe/ZnS core–shell quantum dots (QDs; <d>?5.5 nm, Φ_f=0.27) with the aid of a bifunctional ligand, mercaptopropionic acid. Its high extinction coefficient (?≈4.1×10⁵ m ^?1 cm^?1) and good spectral match with the emission of the FONPs (J(λ)≈4.08×10¹⁶ m ^?1 cm^?1 nm⁴) made them a better acceptor candidate to constitute an efficient FRET pair (Φ_FRET=0.8). As a result, the QD fluorescence intensity was enhanced by more than twofold. The fundamental calculations carried out indicated an improvement in all the FRET parameters as the number of QDs around the FONPs was increased. This, together with the localization of multiple QDs in a nanometric dimension (volume≈1.8×10⁶ nm³), gave highly bright reddish luminescent hybrid particles as visualized under a fluorescence microscope.     

β‐Turn Analogues in Model αβ‐Hybrid Peptides: Structural Characterization of Peptides Containing β2,2Ac6c and β3,3Ac6c Residues

The effect of gem‐dialkyl substituents on the backbone conformations of β‐amino acid residues in peptides has been investigated by using four model peptides: Boc‐Xxx‐β^2,2Ac₆c(1‐aminomethylcyclohexanecarboxylic acid)‐NHMe (Xxx=Leu ( 1 ), Phe ( 2 ); Boc=tert‐butyloxycarbonyl) and Boc‐Xxx‐β^3,3Ac₆c(1‐aminocyclohexaneacetic acid)‐NHMe (Xxx=Leu ( 3 ), Phe ( 4 )). Tetrasubstituted carbon atoms restrict the ranges of stereochemically allowed conformations about flanking single bonds. The crystal structure of Boc‐Leu‐β^2,2Ac₆c‐NHMe ( 1 ) established a C₁₁ hydrogen‐bonded turn in the αβ‐hybrid sequence. The observed torsion angles (α(?≈?60°, ψ≈?30°), β(?≈?90°, θ≈60°, ψ≈?90°)) corresponded to a C₁₁ helical turn, which was a backbone‐expanded analogue of the type III β turn in αα sequences. The crystal structure of the peptide Boc‐Phe‐β^3,3Ac₆c‐NHMe ( 4 ) established a C₁₁ hydrogen‐bonded turn with distinctly different backbone torsion angles (α(?≈?60°, ψ≈120°), β(?≈60°, θ≈60°, ψ≈?60°)), which corresponded to a backbone‐expanded analogue of the type II β turn observed in αα sequences. In peptide 4 , the two molecules in the asymmetric unit adopted backbone torsion angles of opposite signs. In one of the molecules, the Phe residue adopted an unfavorable backbone conformation, with the energetic penalty being offset by a favorable aromatic interaction between proximal molecules in the crystal. NMR spectroscopy studies provided evidence for the maintenance of folded structures in solution in these αβ‐hybrid sequences.     

Synthetic Receptors for the High‐Affinity Recognition of O‐GlcNAc Derivatives

The combination of a pyrenyl tetraamine with an isophthaloyl spacer has led to two new water‐soluble carbohydrate receptors (“synthetic lectins”). Both systems show outstanding affinities for derivatives of N‐acetylglucosamine (GlcNAc) in aqueous solution. One receptor binds the methyl glycoside GlcNAc‐β‐OMe with K_a≈20 000 m ^?1, whereas the other one binds an O‐GlcNAcylated peptide with K_a≈70 000 m ^?1. These values substantially exceed those usually measured for GlcNAc‐binding lectins. Slow exchange on the NMR timescale enabled structural determinations for several complexes. As expected, the carbohydrate units are sandwiched between the pyrenes, with the alkoxy and NHAc groups emerging at the sides. The high affinity of the GlcNAcyl–peptide complex can be explained by extra‐cavity interactions, raising the possibility of a family of complementary receptors for O‐GlcNAc in different contexts.     

Multi‐Pathway Consequent Chemoselectivities of CpRuCl(PPh3)2/MeI‐Catalysed Norbornadiene Alkyne Cycloadditions

Chemoselectivities of five experimentally realised CpRuCl(PPh₃)₂/MeI‐catalysed couplings of 7‐azabenzo‐norbornadienes with selected alkynes were successfully resolved from multiple reaction pathway models. Density functional theory calculations showed the following mechanistic succession to be energetically plausible: (1) CpRuI catalyst activation; (2) formation of crucial metallacyclopentene intermediate; (3) cyclobutene product ( P2 ) elimination (ΔG_Rel(RDS)≈11.9–17.6 kcal mol^?1). Alternative formation of dihydrobenzoindole products ( P1 ) by isomerisation to azametalla‐cyclohexene followed by subsequent CpRuI release was much less favourable (ΔG_Rel(RDS)≈26.5–29.8 kcal mol^?1). Emergent stereoselectivities were in close agreement with experimental results for reactions a , b , e . Consequent investigations employing dispersion corrections similarly support the empirical findings of P1 dominating in reactions c and d through P2 → P1 product transformations as being probable (ΔG≈25.3–30.1 kcal mol^?1).     

N‐Alkyl Ammonium Resorcinarene Salts as High‐Affinity Tetravalent Chloride Receptors

N‐Alkyl ammonium resorcinarene salts (NARYs, Y=triflate, picrate, nitrate, trifluoroacetates and NARBr) as tetravalent receptors, are shown to have a strong affinity for chlorides. The high affinity for chlorides was confirmed from a multitude of exchange experiments in solution (NMR and UV/Vis), gas phase (mass spectrometry), and solid‐state (X‐ray crystallography). A new tetra‐iodide resorcinarene salt (NARI) was isolated and fully characterized from exchange experiments in the solid‐state. Competition experiments with a known monovalent bis‐urea receptor ( 5 ) with strong affinity for chloride, reveals these receptors to have a much higher affinity for the first two chlorides, a similar affinity as 5 for the third chloride, and lower affinity for the fourth chloride. The receptors affinity toward chloride follows the trend K₁?K₂?K₃≈ 5 >K₄, with K_a=5011 m ^?1 for 5 in 9:1 CDCl₃/[D₆]DMSO.     

Hydrogenation of CO2 to Formic Acid with a Highly Active Ruthenium Acriphos Complex in DMSO and DMSO/Water

The novel [Ru(Acriphos)(PPh₃)(Cl)(PhCO₂)] [ 1 ; Acriphos=4,5‐bis(diphenylphosphino)acridine] is an excellent precatalyst for the hydrogenation of CO₂ to give formic acid in dimethyl sulfoxide (DMSO) and DMSO/H₂O without the need for amine bases as co‐reagents. Turnover numbers (TONs) of up to 4200 and turnover frequencies (TOFs) of up to 260 h^?1 were achieved, thus rendering 1 one of the most active catalysts for CO₂ hydrogenations under additive‐free conditions reported to date. The thermodynamic stabilization of the reaction product by the reaction medium, through hydrogen bonds between formic acid and clusters of solvent or water, were rationalized by DFT calculations. The relatively low final concentration of formic acid obtained experimentally under catalytic conditions (0.33 mol L^?1) was shown to be limited by product‐dependent catalyst inhibition rather than thermodynamic limits, and could be overcome by addition of small amounts of acetate buffer, thus leading to a maximum concentration of free formic acid of 1.27 mol L^?1, which corresponds to optimized values of TON=16×10³ and TOF_avg≈10³ h^?1.     

Full Characterization of Colloidal Solutions of Long‐Alkyl‐Chain‐Amine‐Stabilized ZnO Nanoparticles by NMR Spectroscopy: Surface State,Equilibria, and Affinity

Full NMR characterization of ZnO nanoparticles (NPs) stabilized by various amines (hexadecylamine, dodecylamine, and octylamine) in C₇D₈ demonstrated that the surface of this apparently simple system was very complex. Using different NMR spectroscopic techniques (¹H, PGSE‐NMR, diffusion‐filtered ¹H NMR, NOESY, ROESY), we observed at least three different modes of interaction of the amines at the surface of the NPs, in thermodynamic equilibrium with the free amines, the relative populations of which varied with their concentration. The first mode corresponded to a strong interaction between a small amount of amine and the ZnO NPs (k_desorp≈13 s^?1). The second mode corresponded to a weak interaction between the amines and the surface of the ZnO NPs (k_off(2)≈50–60 s^?1). The third, and weakest, mode of interaction corresponded to the formation of a second ligand shell by the amine around the NPs that was held together through van der Waals interactions (k_off(1)≈25×10⁵ s^?1). The second and third modes were in fast exchange on the NMR timescales with the free amines. The strongly interacting amines at the NPs surface (first mode) were in slow exchange with the other modes. A complex hydrogen‐bonding network at the NPs surface was also observed, which did not only involve the coordinated amine but also THF and water molecules that remained from the synthesis.     

Rapid Photoactivated Generation of Nitroxyl (HNO) under Neutral pH Conditions

Directly obtaining kinetic and mechanistic data for the reactions of nitroxyl (HNO) with biomolecules (k≈10³–10⁷ m ^?1 s^?1) is not feasible for many systems because of slow HNO release from HNO donor molecules (t_1/2 is typically minutes to hours). To address this limitation, we have developed a photoactivatable HNO donor incorporating the (3‐hydroxy‐2‐naphthalenyl)methyl phototrigger, which rapidly releases HNO on demand. A “proof of concept” study is reported, which demonstrates that, upon continuous xenon light excitation, rapid decomposition of the HNO donor occurs within seconds. The amount of HNO generated is strongly dependent on solvent and the rate of the reaction is dependent on the light intensity.     

A Dual‐Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single‐ligand‐based electronically conductive porous coordination polymers/metal–organic frameworks (EC‐PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π‐conjugated EC‐MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene, THQ=tetrahydroxy‐1,4‐quinone). The modulated conductivity (σ≈2.53×10^?5 S cm^?1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g^?1) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

Phenacyl–Thiophene and Quinone Semiconductors Designed for Solution Processability and Air‐Stability in High Mobility n‐Channel Field‐Effect Transistors

Electron‐transporting organic semiconductors (n‐channel) for field‐effect transistors (FETs) that are processable in common organic solvents or exhibit air‐stable operation are rare. This investigation addresses both these challenges through rational molecular design and computational predictions of n‐channel FET air‐stability. A series of seven phenacyl–thiophene‐based materials are reported incorporating systematic variations in molecular structure and reduction potential. These compounds are as follows: 5,5′′′‐bis(perfluorophenylcarbonyl)‐2,2′:5′,‐ 2′′:5′′,2′′′‐quaterthiophene ( 1 ), 5,5′′′‐bis(phenacyl)‐2,2′:5′,2′′: 5′′,2′′′‐quaterthiophene ( 2 ), poly[5,5′′′‐(perfluorophenac‐2‐yl)‐4′,4′′‐dioctyl‐2,2′:5′,2′′:5′′,2′′′‐quaterthiophene) ( 3 ), 5,5′′′‐bis(perfluorophenacyl)‐4,4′′′‐dioctyl‐2,2′:5′,2′′:5′′,2′′′‐quaterthiophene ( 4 ), 2,7‐bis((5‐perfluorophenacyl)thiophen‐2‐yl)‐9,10‐phenanthrenequinone ( 5 ), 2,7‐bis[(5‐phenacyl)thiophen‐2‐yl]‐9,10‐phenanthrenequinone ( 6 ), and 2,7‐bis(thiophen‐2‐yl)‐9,10‐phenanthrenequinone, ( 7 ). Optical and electrochemical data reveal that phenacyl functionalization significantly depresses the LUMO energies, and introduction of the quinone fragment results in even greater LUMO stabilization. FET measurements reveal that the films of materials 1 , 3 , 5 , and 6 exhibit n‐channel activity. Notably, oligomer 1 exhibits one of the highest μ_e (up to ≈0.3 cm² V^?1 s^?1) values reported to date for a solution‐cast organic semiconductor; one of the first n‐channel polymers, 3 , exhibits μ_e≈10^?6 cm² V^?1 s^?1 in spin‐cast films (μ_e=0.02 cm² V^?1 s^?1 for drop‐cast 1 : 3 blend films); and rare air‐stable n‐channel material 5 exhibits n‐channel FET operation with μ_e=0.015 cm² V^?1 s^?1, while maintaining a large I_on:off=10⁶ for a period greater than one year in air. The crystal structures of 1 and 2 reveal close herringbone interplanar π‐stacking distances (3.50 and 3.43 Å, respectively), whereas the structure of the model quinone compound, 7 , exhibits 3.48 Å cofacial π‐stacking in a slipped, donor‐acceptor motif.     

Anion‐Dependent Tendency of Di‐Long‐Chain Quaternary Ammonium Salts to Form Ion Quadruples and Higher Aggregates in Benzene

The self‐aggregation tendency of [N(CH₃)₂(C₁₈H₃₇)₂]X [ 1 X; X^?=BF₄^?, PF₆^?, OTf^?, NTf₂^?, BPh₄^?, BTol₄^?, BAr^F?, and B(C₆F₅)₄^?] salts to form ion quadruples (IQs) and higher aggregates (HAggs) in [D₆]benzene is investigated by means of diffusion NMR spectroscopy. The experimental results indicate that salts containing small anions ( 1 BF₄, 1 PF₆, and 1 OTf) are present in solution as IQs even at the lowest investigated concentration of C=5×10^?5 M and show a limited tendency to further self‐aggregate, reaching a maximum average aggregation number (N=V_H/${V_{\rm{H}}^{{\rm{0IP}}} }$ , where V_H=measured hydrodynamic volume and ${V_{\rm{H}}^{{\rm{0IP}}} }$ =hydrodynamic volume of the ion pair) of about 6–8 (C=0.050–0.100 M ). Salts with larger counterions [ 1 BPh₄, 1 BTol₄, 1 BAr^F, and 1 B(C₆F₅)₄] form instead ion pairs at low concentration but steadily self‐aggregate (especially the non‐fluorinated ones) on increasing their concentration up to N values exceeding 50 (C=0.030–0.050 M ). 1 NTf₂ behaves in an intermediate fashion. The self‐aggregation tendency of salts is quantified by formulating the dependence of V_H on C by means of the equations of indefinitive aggregation models. The following rankings for the formation of IQs and HAggs are obtained: IQs: 1 BF₄≈ 1 PF₆≈ 1 OTf> 1 NTf₂> 1 B(C₆F₅)₄≥ 1 BPh₄≥ 1 BTol₄≥ 1 BAr^F; HAggs: 1 BTol₄> 1 BPh₄> 1 NTf₂> 1 B(C₆F₅)₄> 1 BAr^F> 1 BF₄≈ 1 PF₆≈ 1 OTf. Interionic NOE NMR studies and DFT calculations were conducted in order to determine the relative anion–cation orientation in the self‐aggregating units.     

Studies on the nuclease activity and interactions of the mixed‐polypyridyl [Ni2(1,3‐tpbd)(diimine)2(H2O)2]4+ complexes with thioredoxin reductase

Three new nickel(II) complexes formulated as [Ni₂(1,3‐tpbd)(diimine)₂(H₂O)₂]⁴⁺ [1,3‐tpbd = N,N,N′,N′‐tetrakis(2‐pyridylmethyl)benzene‐1,3‐diamine, where diimine is an N,N‐donor heterocyclic base like 1,10‐phenanthroline (phen),2,2′‐bipyridine (bpy), 4,5‐diazafluoren‐9‐one (dafo)], have been synthesized and structurally characterized by X‐ray crystallography: [Ni₂(1,3‐tpbd)(phen)₂(H₂O)₂]⁴⁺ (1), [Ni₂(1,3‐tpbd)(bpy)₂(H₂O)₂]⁴⁺(2) and [Ni₂(1,3‐tpbd)(dafo)₂(H₂O)₂]⁴⁺ (3). Single‐crystal diffraction reveals that the metal atoms in the complexes are all in a distorted octahedral geometry and in a trans arrangement around 1,3‐tpbd ligand. The interactions of the three complexes with calf thymus DNA (CT‐DNA) have been investigated by UV absorption, fluorescence spectroscopy, circular dichroism and viscosity. The apparent binding constant (K_app) values are calculated to be 1.91 × 10⁵ m ^?1 for 1, 1.18 × 10⁵ m ^?1 for 2, and 1.35 × 10⁵ m ^?1 for 3, following the order 1 > 3 > 2. The higher DNA binding affinity of 1 is due to the involvement in partial insertion of the phen ring between the DNA base pairs. A decrease in relative viscosities of DNA upon binding to 1–3 is consistent with the DNA binding affinities. These complexes efficiently display oxidative cleavage of supercoiled DNA in the presence of H₂O₂ (250 µ m ), with 3 exhibiting the highest nuclease activity. The rate constants for the conversion of supercoiled to nicked DNA are 5.28 × 10^?5 s^?1 (for 1), 6.67 × 10^?5 s^?1 (for 2) and 1.39 × 10^?4 s^?1 (for 3), also indicating that complex 3 shows higher catalytic activity than 1 and 2. Here the nuclease activity is not readily correlated to binding affinity. The inhibitory effect of complexes 1–3 on thioredoxin reductase has also been examined. The IC₅₀ values are calculated to be 26.54 ± 0.57, 31.03 ± 3.33 and 8.69 ± 2.54 µ m , respectively, showing a more marked inhibitory effect on thioredoxin reductase by complex 3 than the other two complexes. Copyright © 2012 John Wiley & Sons, Ltd.     

Promoting Difficult Carbon–Carbon Couplings: Which Ligand Does Best?

A Pd complex, cis‐[Pd(C₆F₅)₂(THF)₂] ( 1 ), is proposed as a useful touchstone for direct and simple experimental measurement of the relative ability of ancillary ligands to induce C?C coupling. Interestingly, 1 is also a good alternative to other precatalysts used to produce Pd⁰L. Complex 1 ranks the coupling ability of some popular ligands in the order P^tBu₃>o‐TolPEWO‐F≈tBuXPhos>P(C₆F₅)₃≈PhPEWO‐F>P(o‐Tol)₃≈THF≈tBuBrettPhos?Xantphos≈PhPEWO‐H?PPh₃ according to their initial coupling rates, whereas their efficiency, depending on competitive hydrolysis, is ranked tBuXPhos≈P^tBu₃≈o‐TolPEWO‐F>PhPEWO‐F>P(C₆F₅)₃?tBuBrettPhos>THF≈P(o‐Tol)₃>Xantphos>PhPEWO‐H?PPh₃. This “meter” also detects some other possible virtues or complications of ligands such as tBuXPhos or tBuBrettPhos.     

Energy Transfer in Aminonaphthalimide‐Boron‐Dipyrromethene (BODIPY) Dyads upon One‐ and Two‐Photon Excitation: Applications for Cellular Imaging

Aminonaphthalimide–BODIPY energy transfer cassettes were found to show very fast (k_EET≈10¹⁰–10¹¹ s^?1) and efficient BODIPY fluorescence sensitization. This was observed upon one‐ and two‐photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In comparison with the direct excitation of the BODIPY chromophore, the two‐photon absorption cross‐section δ of the dyads is significantly incremented by the presence of the aminonaphthalimide donor [δ≈10 GM for the BODIPY versus 19–26 GM in the dyad at λ_exc=840 nm; 1 GM (Goeppert–Mayer unit)=10^?50 cm⁴ s molecule^?1 photon^?1]. The electronic decoupling of the donor and acceptor, which is a precondition for the energy transfer cassette concept, was demonstrated by time‐dependent density functional theory calculations. The applicability of the new probes in the one‐ and two‐photon excitation mode was demonstrated in a proof‐of‐principle approach in the fluorescence imaging of HeLa cells. To the best of our knowledge, this is the first demonstration of the merging of multiphoton excitation with the energy transfer cassette concept for a BODIPY‐containing dyad.     

β,β‐(1,4‐Dithiino)subporphyrin Dimers Capturing Fullerenes with Large Association Constants

β,β‐(1,4‐Dithiino)subporphyrin dimers 7‐syn and 7‐anti were synthesized by the nucleophilic aromatic substitution reaction of 2‐bromo‐3‐(4‐methoxyphenylsulfonyl)subporphyrin 4 with 2,3‐dimercaptosubporphyrin 5 under basic conditions followed by axial arylation. Additions of C₆₀ or C₇₀ to a dilute solution of 7‐anti (ca. 10^?6 m ) in toluene did not cause appreciable UV/Vis spectral changes, while similar additions to a concentrated solution (ca. 10^?3 m ) resulted in precipitation of complexes. In contrast, dimer 7‐syn captured C₆₀ and C₇₀ in different complexation stoichiometries in toluene; a 1:1 manner and a 2:1 manner, respectively, with large association constants; K_a=(1.9±0.2)×10⁶ m ^?1 for C₆₀@ 7‐syn , and K₁=(1.6±0.5)×10⁶ and K₂=(1.8±0.9)×10⁵ m ^?1 for C₇₀@( 7‐syn )₂. These association constants are the largest for fullerenes‐capture by bowl‐shaped molecules reported so far. The structures of C₆₀@ 7‐anti , C₇₀@ 7‐anti , C₆₀@ 7‐syn , and C₇₀@ 7‐syn have been determined by single‐crystal X‐ray diffraction analysis.     

Synthesis and characterization of anhydrous conducting polyimide/ionic liquid complex membranes via a new route for high‐temperature fuel cells

The paper deals with the synthesis and characterization of a new series of anhydrous conducting acid‐doped complex membranes based on polyimide (PI) and ionic liquid (IL) for high‐temperature fuel cells via a new route. For this purpose, three imidazolium‐based ILs (RIm⁺BF₄^?) with different alkyl chain lengths (R=methyl, ethyl, and butyl) are added into polyamic acid (PAA) intermediate prepared from the reaction of benzophenonetetracarboxylic dianhydride and diaminodiphenylsulfone in different –COOH/imidazolium molar ratios (n = 0.5, 1, and 2). Then, the thermally imidized complex membrane was doped with H₂SO₄. The conductivities of acid‐doped PI/IL complex membranes prepared by taking n of 1 are found to be in the range of 10^?4?10^?5 S cm^?1 at 180°C, whereas the acid‐free PI/IL complex membranes show the conductivity at around 10^?9?10^?10 S cm^?1. Thermogravimetric analysis results reveal that the acid‐doped PI/IL complex membranes are thermally stable up to 250°C. Dynamic mechanical analysis results of the acid‐doped ionically interacted complex membrane show that the mechanical strengths of the PI/IL complex membranes including 1‐methyl imidazolium tetrafluoroborate (MeIm‐BF₄) and 1‐ethyl 3‐methyl imidazolium tetrafluoroborate (EtIm‐BF₄) are comparable with those of pristine PI until 200°C. Furthermore, it can be clearly emphasized that the ionic interaction between carboxylic acid groups of PAA's and IL's cations offers a positive role in long‐term conductivity stability by preventing the IL migration at high temperatures. On the other hand, preliminary methanol permeability tests of the acid‐doped membranes show that they can also be considered as an alternative for direct methanol fuel cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of Gallic Acid by Flow Injection Analysis Based on Luminol‐AgNO3‐Ag NPs Chemiluminescence System

A novel flow injection procedure has been developed for the determination of gallic acid based on the enhancement function for luminol‐AgNO₃‐Ag NPs chemiluminescence (CL) system by gallic acid. The enhancement mechanism was proposed for the reinforcing effect of the gallic acid on the CL system. The UV‐vis absorption spectrum and CL emission spectrum were applied to confirm the mechanism. The method is simple, rapid and sensitive with a detection limit of 5×10^?10 g·mL^?1 and a linear range of 8.0×10^?10–1.0×10^?7 g·mL^?1. The relative standard deviation (RSD) is 1.3% for eleven measurements of 5×10^?8 g·mL^?1 gallic acid. The method has been successfully applied to the determination of gallic acid in Chinese proprietary medicine–Jianmin Yanhou tablets and synthesized samples.     

Discrete Divalent Rare‐Earth Cationic ROP Catalysts: Ligand‐Dependent Redox Behavior and Discrepancies with Alkaline‐Earth Analogues in a Ligand‐Assisted Activated Monomer Mechanism

The first solvent‐free cationic complexes of the divalent rare‐earth metals, [{RO}RE^II]⁺[A]^? (RE^II=Yb^II, 1 ; Eu^II, 2 ) and [{LO}RE^II]⁺[A]^? ([A]^?=[H₂N{B(C₆F₅)₃}₂]^?; RE^II=Yb^II, 3 ; Eu^II, 4 ), have been prepared by using highly chelating monoanionic aminoether‐fluoroalkoxide ({RO}^?) and aminoether‐phenolate ({LO}^?) ligands. Complexes 1 and 2 are structurally related to their alkaline‐earth analogues [{RO}AE]⁺[A]^? (AE=Ca, 5 ; Sr, 6 ). Yet, the two families behave very differently during catalysis of the ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA) and trimethylene carbonate (TMC) performed under immortal conditions with excess BnOH as an exogenous chain‐transfer agent. The ligand was found to strongly influence the behavior of the RE^II complexes during ROP catalysis. The fluoroalkoxide RE^II catalysts 1 and 2 are not oxidized under ROP conditions, and compare very favorably with their Ca and Sr congeners 5 and 6 in terms of activity (turnover frequency (TOF) in the range 200–400 mol_L‐LA (mol_Eu h^?1)) and control over the parameters during the immortal ROP of L ‐LA (M_n,theor≈M_n,SEC, M_w/M_n<1.05). The Eu^II‐phenolate 4 provided one of the most effective ROP cationic systems known to date for L ‐LA polymerization, exhibiting high activity (TOF up to 1 880 mol_L‐LA?(mol_Eu h)^?1) and good control (M_w/M_n=1.05). By contrast, upon addition of L ‐LA the Yb^II‐phenolate 3 immediately oxidizes to inactive RE^III species. Yet, the cyclic carbonate TMC was rapidly polymerized by combinations of 3 (or even 1 ) and BnOH, revealing excellent activities (TOF=5000–7000 mol_TMC?(mol_Eu h)^?1) and unusually high control (M_n,theor≈M_n,SEC, M_w/M_n<1.09); under identical conditions, the calcium derivative 5 was entirely inert toward TMC. Based on experimental and kinetic data, a new ligand‐assisted activated monomer ROP mechanism is suggested, in which the so‐called ancillary ligand plays a crucial role in the catalytic cycle. A coherent reaction pathway computed by DFT, compatible with the experimental data, supports the proposed scenario.