A study on the best irradiation dose of X-ray for Hep-2 cells by Fourier transform infrared spectroscopy

Fourier transform infrared spectroscopy (FTIR) was employed to study the human epidermis larynx carcinoma cell lines (Hep-2) which were irradiated by different doses of X-ray.The results show that (1) the irradiation of X-ray damages the structure of the CH3 groups of the thymine in DNA,which restrains the reproduction of Hep-2 cells effectively,(2) the 8 Gy dose of X-ray irradiation changes the framework and the relative contents of some proteins,lipids and the nucleic acid molecules intercellular in the greatest degree,and (3) the 8 Gy dose of X-ray irradiation is the best irradiation dose for lowering the degree of the cancerization of Hep-2 cells according to the criteria for the degree of the cancerization reported recently.Meanwhile,the apoptosis of these cells were detected by using flow cytometry (FCM) primarily.It shows that the apoptotic ratio of the Hep-2 cells depends on the irradiation dose to some extent,but is not linearly.And the apoptotic ratio of the 12 Gy dose group is the maximum (20.36%),but the apoptotic ratios of the 2 to 8 Gy dose groups change little.     

Modification to first-order Born approximation for improved prediction of scattered sound from weakly scattering objects

When deriving the Fourier diffraction theorem based on the first-order Born approximation,the difference between wave number of the scattering object and that of the surrounding medium is ignored,causing substantial errors in sound scattering prediction.This paper modifies the Born approximation by taking into account the amplitude and phase changes between the scattering object and the water due to the wave number difference.By changing the radius and center position of the sampling circle in the Fourier domain,accuracy of the predicted sound scattering is improved.With the modified Born approximation,the computed far-field directional pattern of the scattered sound from a circular cylinder is in good agreement with the rigorous solution.Numerical calculations for several objects with different shapes are used to show applicability and effectiveness of the proposed method.     

Study on the radiation problem caused by electron beam loss in accelerator tubes

The beam dynamic code PARMELA was used to simulate the transportation process of accelerating electrons in S-band SW linacs with different energies of 2.5, 6 and 20 MeV. The results indicated that in the ideal condition, the percentage of electron beam loss was 50% in accelerator tubes. Also we calculated the spectrum, the location and angular distribution of the lost electrons. Calculation performed by Monte Carlo code MCNP demonstrated that the radiation distribution of lost electrons was nearly uniform along the tube axis, the angular distributions of the radiation dose rates of the three tubes were similar, and the highest leaking dose was at the angle of 160° with respect to the axis. The lower the energy of the accelerator, the higher the radiation relative leakage. For the 2.5 MeV accelerator, the maximum dose rate reached 5% of the main dose and the one on the head of the electron gun was 1%, both of which did not meet the eligible protection requirement for accelerators. We adopted different shielding designs for different accelerators. The simulated result showed that the shielded radiation leaking dose rates fulfilled the requirement.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Factors affecting the spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium

The spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium is discussed within the accuracy of the first-order Born approximation. It is shown that spectral shifts and spectral switches are affected both by the polarization of the incident light wave and by the characters of the scat-tering medium. Moreover, numerical results show that the direction at which the spectral switch occurs is governed by the characters of the scattering medium, whereas the magnitude of the spectral switch is affected by the polarization of the incident light wave.     

Temperature Sensitivity Control and Mechanical Stress Effect of Boron-Doped Long-Period Fiber Gratings

We will present in this work the quantitative analysis of the relationship between the doping concentrations of GeO 2 and B 2 O 3 in the core and cladding regions and the temperature sensitivity of the resonance wavelength shift in long-period fiber gratings (LPFGs). Based on this analysis, the temperature sensitivity was suppressed and enhanced to 0.002 nm/°C and 0.28 nm/°C, respectively. We will also discuss the effect of the residual mechanical stress on the optical and mechanical properties of LPFGs. In particular, we will present the measurement results of the dependence of the refractive index change and mechanical strength on the residual mechanical stress in the boron-doped fibers with depressed clad and matched clad.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Time domain finite volume method for the transient response and natural characteristics of structural-acoustic coupling in an enclosed cavity

A time domain finite volume method（TDFVM）based on wave theory is developed to analyze the transient response and natural characteristics of structural-acoustic coupling problems in an enclosed cavity.In the present method,the elastic dynamic equations and acoustic equation in heterogeneous medium are solved in solid domains and fluid domains respectively.The structural-acoustic coupling is implemented according to the continuity condition of the particle velocity along the normal direction and the normal traction equilibrium condition on the interface.Several numerical examples are presented to validate the effectiveness and accuracy of the present TDFVM.Then the effects of water depth on the acoustic and vibration characteristics and the natural characteristics of a structural-acoustic coupling system are analyzed.The numerical results show that the increase of water depth leads to a stronger coupling between the water and structure and the decrease of natural frequencies of coupling system,The computational cost and memory of this method are small and it can be applicable to structural-acoustic coupling problems in the heterogeneous fluid.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

Exploitation of the Fiber Capacity in Optical Networks Using Time, Frequency, and Space Division Multiple Accesses

In this work we investigate how to obtain very high capacity transmissions in optical networks taking into account the limitations due to the physical channel. We consider both the case in which all the users are connected by a star coupler and the case in which the users are directly connected by the network topology. As a reference, we consider a ring network and a Shuffle Multihop Network (SMN). The use of optical systems to implement high-capacity networks is numerically investi gated by means of numerical simulations taking into consideration the channel limitations due to the chromatic dispersion, the Kerr effect, and the amplified spontaneous emission (ASE) noise of the optical amplifiers. In our model, we consider that the signal, during the routing process that is performed at the user position, undergoes only an attenuation. We suppose the use of intensity modulated signals and receivers with direct detection. Packet switching and digital transmission are assumed with soliton and conventional nonreturn to zero signals. Both wave length and time division multiple accesses are considered. The results show that, in the case of the Time Division Multiple Access (TDMA) technique, the use of a star coupler to connect the users reduces the capacity of a network with respect to the case in which a direct connection of the users is used. This is due to the strong power fluctuations that are present during the signal propagation and to the large quantity of accumulated ASE noise. On the other hand, the use of a star coupler shows the advantage to being easily reconfigurable. The Wavelength Divison Multiple Access (WDMA) technique permits us to achieve higher capacities with respect to the TDMA. This is due to the fact that in the propagation conditions, due to the presence of a star coupler, high bit rate signals are strongly degraded. On the other hand, several low bit rate signals operating at different wavelengths can propagate with a low power level, avoiding strong degradation due to the Four Wave Mixing (FWM) effect. Among the topologies considered in this work, the SMN is the one that generally permits us to reach the highest throughput because in the SMN the signal hops in a limited number of Network Interface Units (NIUs) before reaching the final destination.     

Synergistic effects on iodine release in potassium iodide solution by combination of ultrasound and visible light irradiations

Iodine release in potassium iodide solution has been investigated under the irradiations of ultrasound and visible light respectively and simultaneously. We have observed that the amount of iodine liberated under the combined irradiation of ultrasound and visible light is larger than the sum of that under the respective irradiations of ultrasound and visible light, indicating a synergistic effect of ultrasound and visible light irradiations. Based on the investigation of the reaction kinetics of iodine liberated, we have ascribed the synergistic effect to the perfect stirring of the photochemical reactor induced by the applying simultaneous ultrasound. The ideal stirring can result in the homogenization of the primary light effect in the whole reaction medium, which induces the acceleration of the photochemical reaction. On behavior of our knowledge, there are few reports on the investigations of utilizing the combination of ultrasonic energy and light energy to accelerate the reaction yield and rate as well as the kinetics of the reaction.     

Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.     

Analysis of Laser-generated Rayleigh wave on viscoelastic materials

In order to understand the viscoelasticity of material, this research has been conducted to study the propagation characteristics of viscoelastic Rayleigh wave theoretically. A model is presented for the pulsed laser generation of ultrasound on viscoelastic medium surface. Referred to the Kelvin model, the frequency equation and the normal displacement of viscoelastic Rayleigh wave were derived, the influence of the viscoelastic modulus on dispersion and attenuation was discussed. From the theoretical calculation, it is shown that the effect of viscoelasticity on the attenuation of Rayleigh wave is more than that on its dispersion. In the case of a weak viscosity, the attenuation of viscoelastic Rayleigh wave is directly proportional to viscosity modulus; the effect of shear viscosity on the attenuation is much more than that of bulk viscosity. The transient response of viscoelastic Rayleigh wave was also simulated using Laplace and Hankel inversion transform, which are showed in good agreement with the theoretic predictions. The model provides a useful tool for the determination of viscoelastic parameters of medium.     

Associated productions of the new gauge boson BH in the Littlest Higgs model with a SM gauge boson via e+e- collision

With the high energy and luminosity, the planned ILC has the considerable capability to probe the new heavy particles predicted by the new physics models. In this paper, we study the potential to discover the lightest new gauge boson BH of the Littlest Higgs model via the processes e+e- →γ(Z)BH at the ILC. The results show that the production rates of these two processes are large enough to detect BH in a wide range of the parameter spaces, specially for the process e+e- →γBH. Furthermore, there exist some decay modes for BH which can provide the typical signal and clean backgrounds. Therefore, the new gauge boson BH should be observable via these production processes with the running of the ILC if it exist.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Novel iteration-free blind phase noise estimation for coherent optical OFDM

We propose a novel iteration-free blind phase noise estimation scheme for coherent optical orthogonal frequency division multiplexing （CO-OFDM） systems. In the new algorithm, the cost function is selected as the similar expression with real and imaginary parts as that in the modified constant modulus algorithm, and the new cost function is derived under some assumptions, where it is infinitely approximated by the sine and cosine functions. By means of the analytical formula of the cost function, the initial coarse common phase error can be obtained with only some samples, where the algorithm avoids computational complexity of conventional blind phase noise compensation scheme. In CO-OFDM systems with high-order modulation format （32 quadrature amplitude modulation） and narrow linewidth lasers, it is proved by the simulation results that the nhase noise can be effectively compensated with the proposed blind estimation method.     

An implicit FDTD scheme for the propagation of VLF–LF radio waves in the Earth–ionosphere waveguide

A new finite-difference time-domain scheme is presented for the propagation of VLF–LF radio waves in the Earth–ionosphere waveguide. The new scheme relies on the implicit solution of the auxiliary equation that governs the current density in the ionosphere. The advantages and drawbacks of the new scheme are discussed. Its main advantage is its stability condition, which is the same as that of the FDTD method in a vacuum. This permits the time step of the calculation to be increased and then the overall computational time to be reduced. Numerical experiments demonstrate the accuracy of the new scheme and the reduction of the computational time.     

Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

The radiation directivity of a complicated conformal array of underwater acoustic transducers is presented based on the boundary ＂element method. It includes the element directivity of each transducer, the natural beam pattern and the controlled beam pattern of the transducer array. At first, the boundary element model of the conformal array is built up, and then the boundary condition is exerted on the model according to the design and environment in which the transducer array is used, and the radiation directivity of the conformal array is calculated. An experiment has been done to measure the directivity in an anechoic water tank. The calculated and the experimental results are compared and analyzed. They are consistent to each other. It is shown that the boundary element method together with the detailed calculations is successful to simulate and predict the radiation directivity of an underwater acoustic transducer array.     

Injection System design for a hadron therapy Synchrotron

A synchrotron is designed for tumour therapy with C6+ ions or proton.Its injector is a cyclotron, which delivers C5+or H+2 ions to the synchrotron.After comparing the methods of the single-turn injection, the multi-turn injection and the stripping injection,this paper chooses the stripping injection method.In addition,the concept design of the injection system is presented,in which the synchrotron lattice is optimized.