Self‐Assembly of a Giant Molecular Solomon Link from 30 Subcomponents

The synthesis of topologically complex structures, such as links and knots, is one of the current challenges in supramolecular chemistry. The so‐called Solomon link consists of two doubly interlocked rings. Despite being a rather simple link from a topological point of view, only few molecular versions of this link have been described so far. Here, we report the quantitative synthesis of a giant molecular Solomon link from 30 subcomponents. The highly charged structure is formed by assembly of 12 cis‐blocked Pt²⁺ complexes, six Cu⁺ ions, and 12 rigid N‐donor ligands. Each of the two interlocked rings is composed of six repeating Pt(ligand) units, while the six Cu⁺ ions connect the two rings. With a molecular weight of nearly 12 kDa and a diameter of 44.2 Å, this complex is the largest non‐DNA‐based Solomon link described so far. Furthermore, it represents a molecular version of a “stick link”.     

Self‐assembly of metallo‐supramolecular block copolymers in thin films

The self‐assembly of a metallo‐supramolecular PS‐[Ru]‐PEO block copolymer, where ‐[Ru]‐ is a bis‐2,2′:6′,2″‐terpyridine‐ruthenium(II) complex, in thin films was investigated. Metallo‐supramolecular copolymers exhibit a different behavior as compared to their covalent counterparts. The presence of the charged complex at the junction of the two blocks has a strong impact on the self‐assembly, effecting the orientation of the cylinders and ordering process. Poly(ethylene oxide) cylinders oriented normal to the film surface are obtained directly regardless of the experimental conditions over a wide range of thicknesses. Exposure to polar solvent vapors can be used to improve the lateral ordering of the cylindrical microdomains. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4719–4724, 2008     

The Self‐Sorting Behavior of Circular Helicates and Molecular Knots and Links

We report on multicomponent self‐sorting to form open circular helicates of different sizes from a primary monoamine, Fe^II ions, and dialdehyde ligand strands that differ in length and structure by only two oxygen atoms. The corresponding closed circular helicates that are formed from a diamine—a molecular Solomon link and a pentafoil knot—also self‐sort, but up to two of the Solomon‐link‐forming ligand strands can be accommodated within the pentafoil knot structure and are either incorporated or omitted depending on the stage that the components are mixed.     

A Solomon Link through an Interwoven Molecular Grid

A molecular Solomon link was synthesized through the assembly of an interwoven molecular grid consisting of four bis(benzimidazolepyridyl)benzthiazolo[5,4‐d]thiazole ligands and four zinc(II), iron(II), or cobalt(II) cations, followed by ring‐closing olefin metathesis. NMR spectroscopy, mass spectrometry, and X‐ray crystallography confirmed the doubly interlocked topology, and subsequent demetalation afforded the wholly organic Solomon link. The synthesis, in which each metal ion defines the crossing point of two ligand strands, suggests that interwoven molecular grids should be useful scaffolds for the rational construction of other topologically complex structures.     

Two‐Dimensional Self‐Assembly of a Porphyrin–Polypyridyl Ruthenium(II) Hybrid on HOPG Surface through Metal–Ligand Interactions

The synthesis and self‐assembly behavior of porphyrin–polypyridyl ruthenium(II) hybrid, which consists of a flexible alkyl chain attached with two conjugated moieties is described. The electronic absorption spectrum and emission spectra show that the [C₈‐TPP‐(ip)Ru(phen)₂](ClO₄)₂, abbreviated as (C₈ip)TPPC has optical properties. Scanning tunneling microscopy (STM) studies found that the π–π interaction and metal–ligand interaction allow (C₈ip)TPPC to form self‐assembled structure and have an edge‐on orientation on the highly oriented pyrolytic graphite (HOPG) surface. The multidentate structure in (C₈ip)TPPC molecules act as linkers between the molecules and form metal–ligand coordination, which forces the assembly process in the direction of stable columnar arrays. In addition, although the sample was stored for two months in ambient conditions, STM experiments showed that the order of (C₈ip)TPPC self‐assembly only slightly decreased which indicates that the self‐assembled monolayer is stable. This work demonstrates that introducing a metal‐ligand in the porphyrin‐polypyridyl compound is a useful strategy to obtain novel surface assemblies.     

Efficient Self‐Assembly of Di‐, Tri‐, Tetra‐, and Hexavalent Hosts with Predefined Geometries for the Investigation of Multivalency

Coordination‐driven self‐assembly of differently shaped di‐ to hexavalent crown‐ether host molecules is described. A series of [21]crown‐7‐ and [24]crown‐8‐substituted bipyridine and terpyridine ligands was synthetized in a “toolbox” approach. Subsequent coordination to 3d transition metal and ruthenium(II) ions provides an easy and fast access to host assemblies with variable valency and pre‐defined orientations of the crown‐ether moieties. Preliminary isothermal calorimetry (ITC) titrations provided promising results, which indicated the host complexes under study to be suitable for the future investigation of multivalent and cooperative binding. The hosts described herein will also be suitable for the construction of various multiply threaded mechanically interlocked molecules.     

Copper(II)‐Mediated Self‐Assembly of Hairpin Peptides and Templated Synthesis of CuS Nanowires

The self‐assembly of peptides and proteins under well‐controlled conditions underlies important nanostructuring processes that could be harnessed in practical applications. Herein, the synthesis of a new hairpin peptide containing four histidine residues is reported and the self‐assembly process mediated by metal ions is explored. The work involves the combined use of circular dichroism, NMR spectroscopy, UV/Vis spectroscopy, AFM, and TEM to follow the structural and morphological details of the metal‐coordination‐mediated folding and self‐assembly of the peptide. The results indicate that by forming a tetragonal coordination geometry with four histidine residues, copper(II) ions selectively trigger the peptide to fold and then self‐assemble into nanofibrils. Furthermore, the copper(II)‐bound nanofibrils template the synthesis of CuS nanowires, which display a near‐infrared laser‐induced thermal effect.     

Coordination‐Driven Self‐Assembly and Anticancer Potency Studies of Ruthenium–Cobalt‐Based Heterometallic Rectangles

Three new cobalt–ruthenium heterometallic molecular rectangles, 1 – 3 , were synthesized through the coordination‐driven self‐assembly of a new cobalt sandwich donor, (η⁵‐Cp)Co[C₄‐trans‐Ph₂(4‐Py)₂] (L ; Cp: cyclopentyl; Py: pyridine), and one of three dinuclear precursors, [(p‐cymene)₂Ru₂(OO∩OO)₂Cl₂] [OO∩OO: oxalato ( A₁ ), 5,8‐dioxido‐1,4‐naphthoquinone ( A₂ ), or 6,11‐dioxido‐5,12‐naphthacenedione ( A₃ )]. All of the self‐assembled architectures were isolated in very good yield (92–94 %) and were fully characterized by spectroscopic analysis; the molecular structures of 2 and 3 were determined by single‐crystal X‐ray diffraction analysis. The anticancer activities of bimetallic rectangles 1 – 3 were evaluated with a 3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5‐diphenyltetrazolium bromide (MTT) assay, an autophagy assay, and Western blotting. Rectangles 1 – 3 showed higher cytotoxicity than doxorubicin in AGS human gastric carcinoma cells. In addition, the autophagic activities and apoptotic cell death ratios were increased in AGS cells by treatment with 1 – 3 ; the rectangles induced autophagosome formation by promoting LC3‐I to LC3‐II conversion and apoptotic cell death by increasing caspase‐3/7 activity. Our results suggest that rectangles 1 – 3 induce gastric cancer cell death by modulating autophagy and apoptosis and that they have potential use as agents for the treatment of human gastric cancer.     

Protein‐Framed Multi‐Porphyrin Micelles for a Hybrid Natural–Artificial Light‐Harvesting Nanosystem

A micelle‐like hybrid natural–artificial light‐harvesting nanosystem was prepared through protein‐framed electrostatic self‐assembly of phycocyanin and a four‐armed porphyrin star polymer. The nanosystem has a special structure of pomegranate‐like unimolecular micelle aggregate with one phycocyanin acceptor in the center and multiple porphyrin donors in the shell. It can inhibit donor self‐quenching effectively and display efficient transfer of excitation energy (about 80.1 %) in water. Furthermore, the number of donors contributing to a single acceptor could reach as high as about 179 in this nanosystem.     

Controlled self‐assembly of porphyrin/fullerene donor–acceptor complex in a polymer thin film

Thin films composed of polycyclohexane (PCHE), zinc(II)‐5,10,15,20‐tetra‐(2‐naphthyl)porphyrin (ZnTNpP), and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends are prepared to investigate their potential for the controlled self‐assembly of a porphyrin/fullerene donor–acceptor complex in a polymer thin film. The compatibilities of PCHE/PCBM (p), PCHE/ZnTNpP (q), and ZnTNpP/PCBM (r) in these blends have a significant effect on the dispersion of the ZnTNpP/PCBM donor–acceptor complex in the PCHE thin film. When the compatibilities are p << q, r, and q ≈ r, the ZnTNpP/PCBM donor–acceptor complex is formed between the PCHE and PCBM phases. This concept to form a controlled self‐assembly of the ZnTNpP/PCBM donor–acceptor complex may be applied to various combinations of porphyrin/fullerene systems in polymer thin film solar cells to achieve excellent performance. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 743–746     

Wide‐Range Light‐Harvesting Donor–Acceptor Assemblies through Specific Intergelator Interactions via Self‐Assembly

We have synthesized two new low‐molecular‐mass organogelators based on tri‐p‐phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor–acceptor self‐assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen‐bonding, π‐stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J‐type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor–acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy‐transfer studies. Interestingly, an energy‐transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene‐donor‐acceptor‐rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light‐harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly.     

Metal‐Folded Single‐Chain Nanoparticle: Nanoclusters and Self‐Assembled Reduction‐Responsive Sub‐5‐nm Discrete Subdomains

Easy access to discrete nanoclusters in metal‐folded single‐chain nanoparticles (metal‐SCNPs) and independent ultrafine sudomains in the assemblies via coordination‐driven self‐assembly of hydrophilic copolymer containing 9% imidazole groups is reported herein. ¹H NMR, dynamic light scattering, and NMR diffusion‐ordered spectroscopy results demonstrate self‐assembly into metal‐SCNPs (>70% imidazole‐units folded) by neutralization in the presence of Cu(II) in water to pH 4.6. Further neutralization induces self‐assembly of metal‐SCNPs (pH 4.6–5.0) and shrinkage (pH 5.0–5.6), with concurrent restraining residual imidazole motifs and hydrophilic segment, which organized into constant nanoparticles over pH 5.6–7.5. Atomic force microscopy results evidence discrete 1.2 nm nanoclusters and sub‐5‐nm subdomains in metal‐SCNP and assembled nanoparticle. Reduction of metal center using sodium ascorbate induces structural rearrangement to one order lower than the precursor. Enzyme mimic catalysis required media‐tunable discrete ultrafine interiors in metal‐SCNPs and assemblies have hence been achieved.     

Drug Conjugation to Cyclic Peptide–Polymer Self‐Assembling Nanotubes

We show for the first time how polymeric nanotubes (NTs) based on self‐assembled conjugates of polymers and cyclic peptides can be used as an efficient drug carrier. RAPTA‐C, a ruthenium‐based anticancer drug, was conjugated to a statistical co‐polymer based on poly(2‐hydroxyethyl acrylate) (pHEA) and poly(2‐chloroethyl methacrylate) (pCEMA), which formed the shell of the NTs. Self‐assembly into nanotubes (length 200–500 nm) led to structures exhibiting high activity against cancer cells.     

Highly Efficient Artificial Light‐Harvesting Systems Constructed in Aqueous Solution Based on Supramolecular Self‐Assembly

Highly efficient light‐harvesting systems were successfully fabricated in aqueous solution based on the supramolecular self‐assembly of a water‐soluble pillar[6]arene (WP6), a salicylaldehyde azine derivative (G), and two different fluorescence dyes, Nile Red (NiR) or Eosin Y (ESY). The WP6‐G supramolecular assembly exhibits remarkably improved aggregation‐induced emission enhancement and acts as a donor for the artificial light‐harvesting system, and NiR or ESY, which are loaded within the WP6‐G assembly, act as acceptors. An efficient energy‐transfer process takes place from the WP6‐G assembly not only to NiR but also to ESY for these two different systems. Furthermore, both of the WP6‐G‐NiR and WP6‐G‐ESY systems show an ultrahigh antenna effect at a high donor/acceptor ratio.     

Direct Synthesis of a Covalently Self‐Assembled Peptide Nanogel from a Tyrosine‐Rich Peptide Monomer and Its Biomineralized Hybrids

There has been significant progress in the self‐assembly of biological materials, but the one‐step covalent peptide self‐assembly for well‐defined nanostructures is still in its infancy. Inspired by the biological functions of tyrosine, a covalently assembled fluorescent peptide nanogel is developed by a ruthenium‐mediated, one‐step photo‐crosslinking of tyrosine‐rich short peptides under the visible light within 6 minutes. The covalently assembled peptide nanogel is stable in various organic solvents and different pH levels, unlike those made from vulnerable non‐covalent assemblies. The semipermeable peptide nanogel with a high density of redox‐active tyrosine acts as a novel nano‐bioreactor, allowing the formation of uniform metal–peptide hybrids by selective biomineralization under UV irradiation. As such, this peptide nanogel could be useful in the design of novel nanohybrids and peptidosomes possessing functional nanomaterials.     

Hydrogen‐Bonding‐Mediated Vesicular Assembly of Functionalized Naphthalene–Diimide‐Based Bolaamphiphile and Guest‐Induced Gelation in Water

This paper describes the spontaneous vesicular assembly of a naphthalene–diimide (NDI)‐based non‐ionic bolaamphiphile in aqueous medium by using the synergistic effects of π‐stacking and hydrogen bonding. Site isolation of the hydrogen‐bonding functionality (hydrazide), a strategy that has been adopted so elegantly in nature, has been executed in this system to protect these moieties from the bulk water so that the distinct role of hydrogen bonding in the self‐assembly of hydrazide‐functionalized NDI building blocks could be realized, even in aqueous solution. Furthermore, the electron‐deficient NDI‐based bolaamphiphile could engage in donor–acceptor (D–A) charge‐transfer (CT) interactions with a water‐insoluble electron‐rich pyrene donor by virtue of intercalation of the latter chromophore in between two NDI building blocks. Remarkably, even when pyrene was located between two NDI blocks, intermolecular hydrogen‐bonding networks between the NDI‐linked hydrazide groups could be retained. However, time‐dependent AFM studies revealed that the radius of curvature of the alternately stacked D–A assembly increased significantly, thereby leading to intervesicular fusion, which eventually resulted in rupturing of the membrane to form 1D fibers. Such 2D‐to‐1D morphological transition produced CT‐mediated hydrogels at relatively higher concentrations. Instead of pyrene, when a water‐soluble carboxylate‐functionalized pyrene derivative was used as the intercalator, non‐covalent tunable in‐situ surface‐functionalization could be achieved, as evidenced by the zeta‐potential measurements.     

The interaction of a novel ruthenium (II) complex with self‐assembled DNA film on silicon surface

Calf thymus DNA (ct‐DNA) films were immobilized onto patterned silicon wafers through electrostatic self‐assembly technology and interacted with a novel dinuclear ruthenium (II) complex, [(bpy)₂Ru(H₂bpi)Ru(bpy)₂](ClO₄)₄, which were demonstrated by using a confocal optical microscope. The morphology of the DNA film was measured by atomic force microscopy and the results show that the DNA strands have been folded into coiled conformations and aggregated into circles with diameters between 18 and 55 nm. The interaction process was also monitored by UV‐visible and fluorescence spectra and investigated by X‐ray photoelectron spectra. The results show that the Ru (II) complex interacts with ct‐DNA by the intercalative mode as it behaves in aqueous solutions. Copyright © 2006 John Wiley & Sons, Ltd.     

Component Selection in the Self‐Assembly of Palladium(II) Nanocages and Cage‐to‐Cage Transformations

Dynamic supramolecular systems involving a tetratopic palladium(II) acceptor and three different pyridine‐ and imidazole‐based donors have been used for self‐selection by a synergistic effect of morphological information and coordination ability of ligands through specific coordination interactions. Three different cages were first synthesized by two‐component self‐assembly of individual donor and acceptor. When all four components were allowed to interact in a reaction mixture, only one out of three cages was isolated. The preferential binding affinity towards a particular partner was also established by transforming a non‐preferred cage into a preferred cage by interaction with the appropriate ligand. Computational studies further supported the fact that coordination interaction of imidazole moiety to Pd^II is enthalpically more preferred compared to pyridine, which drives the selection process. Analysis of crystal packing of both complexes indicated the presence of strong hydrogen bonds between nitrate and water molecules and also H‐bonded 3D networks of water. Both complexes exhibit promising proton conductivity (10^?5 to ca. 10^?3 S cm^?1) at ambient temperature under a relative humidity of circa 98 % with low activation energy.     

Intermolecular Charge‐Transfer Interactions Facilitate Two‐Photon Absorption in Styrylpyridine–Tetracyanobenzene Cocrystals

Cocrystals of 4‐styrylpyridine and 1,2,4,5‐tetracyanobenzene were successfully prepared by supramolecular self‐assembly. Donor–acceptor interactions between the molecular components are the main driving force for self‐assembly and contribute to intermolecular charge transfer. The cocrystals possess two‐photon absorption properties that are not observed in the individual components; suggesting that two‐photon absorption originates from intermolecular charge‐transfer interactions in the donor–acceptor system. The origin of two‐photon absorption in multichromophore systems remains under‐researched; thus, the system offers a rare demonstration of two‐photon absorption by cocrystallization. Cocrystal engineering may facilitate further design and development of novel materials for nonlinear optical and optoelectronic applications.     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.