Bis‐copper(II) Complex of Triply‐linked Corrole Dimer and Its Dication

Copper complexes of corroles have recently been a subject of keen interest due to their ligand non‐innocent character and unique redox properties. Here we investigated bis‐copper complex of a triply‐linked corrole dimer that serves as a pair of divalent metal ligands but can be reduced to a pair of trivalent metal ligands. Reaction of triply‐linked corrole dimer 2 with Cu(acac)₂ (acac=acetylacetonate) gave bis‐copper(II) complex 2Cu as a highly planar molecule with a mean‐plane deviation value of 0.020 Å, where the two copper ions were revealed to be divalent by ESR, SQUID, and XPS methods. Oxidation of 2Cu with two equivalents of AgBF₄ gave complex 3Cu , which was characterized as a bis‐copper(II) complex of a dicationic triply‐linked corrole dimer not as the corresponding bis‐copper(III) complex. In accord with this assignment, the structural parameters around the copper ions were revealed to be quite similar for 2Cu and 3Cu . Importantly, the magnetic spin–spin interaction differs depending on the redox‐state of the ligand, being weak ferromagnetic in 2Cu and antiferromagnetic in 3Cu .     

X-ray and solution structures of Cu(II) GHK and Cu(II) DAHK complexes: influence on their redox properties

The Gly‐His‐Lys (GHK) peptide and the Asp‐Ala‐His‐Lys (DAHK) sequences are naturally occurring high‐affinity copper(II) chelators found in the blood plasma and are hence of biological interest. A structural study of the copper complexes of these peptides was conducted in the solid state and in solution by determining their X‐ray structures, and by using a large range of spectroscopies, including EPR and HYSCORE (hyperfine sub‐level correlation), X‐ray absorption and ¹H and ¹³C NMR spectroscopy. The results indicate that the structures of [Cu^II(DAHK)] in the solid state and in solution are similar and confirm the equatorial coordination sphere of NH₂, two amidyl N and one imidazole N. Additionally, a water molecule is bound apically to Cu^II as revealed by the X‐ray structure. As reported previously in the literature, [Cu^II(GHK)], which exhibits a dimeric structure in the solid state, forms a monomeric complex in solution with three nitrogen ligands: NH₂, amidyl and imidazole. The fourth equatorial site is occupied by a labile oxygen atom from a carboxylate ligand in the solid state. We probe that fourth position and study ternary complexes of [Cu^II(GHK)] with glycine or histidine. The Cu^II exchange reaction between different DAHK peptides is very slow, in contrast to [Cu^II(GHK)], in which the fast exchange was attributed to the presence of a [Cu^II(GHK)₂] complex. The redox properties of [Cu^II(GHK)] and [Cu^II(DAHK)] were investigated by cyclic voltammetry and by measuring the ascorbate oxidation in the presence of molecular oxygen. The measurements indicate that both Cu^II complexes are inert under moderate redox potentials. In contrast to [Cu^II(DAHK)], [Cu^II(GHK)] could be reduced to Cu^I around ?0.62 V (versus AgCl/Ag) with subsequent release of the Cu ion. These complete analyses of structure and redox activity of those complexes gave new insights with biological impact and can serve as models for other more complicated Cu^II–peptide interactions.     

Protonation of a Biologically Relevant CuII μ‐Thiolate Complex: Ligand Dissociation or Formation of a Protonated CuI Disulfide Species?

The proton‐induced electron‐transfer reaction of a Cu^II μ‐thiolate complex to a Cu^I‐containing species has been investigated, both experimentally and computationally. The Cu^II μ‐thiolate complex [Cu^II₂( L^MeS )₂]²⁺ is isolated with the new pyridyl‐containing ligand L^MeSSL^Me , which can form both Cu^II thiolate and Cu^I disulfide complexes, depending on the solvent. Both the Cu^II and the Cu^I complexes show reactivity upon addition of protons. The multivalent tetranuclear complex [Cu^I₂Cu^II₂( LS )₂(CH₃CN)₆]⁴⁺ crystallizes after addition of two equivalents of strong acid to a solution containing the μ‐thiolate complex [Cu^II₂( LS )₂]²⁺ and is further analyzed in solution. This study shows that, upon addition of protons to the Cu^II thiolate compound, the ligand dissociates from the copper centers, in contrast to an earlier report describing redox isomerization to a Cu^I disulfide species that is protonated at the pyridyl moieties. Computational studies of the protonated Cu^II μ‐thiolate and Cu^I disulfide species with LSSL show that already upon addition of two equivalents of protons, ligand dissociation forming [Cu^I(CH₃CN)₄]⁺ and protonated ligand is energetically favored over conversion to a protonated Cu^I disulfide complex.     

Hydrogen Bonds Dictate the Coordination Geometry of Copper: Characterization of a Square‐Planar Copper(I) Complex

6,6′′‐Bis(2,4,6‐trimethylanilido)terpyridine (H₂Tpy^NMes) was prepared as a rigid, tridentate pincer ligand containing pendent anilines as hydrogen bond donor groups in the secondary coordination sphere. The coordination geometry of (H₂Tpy^NMes)copper(I)‐halide (Cl, Br and I) complexes is dictated by the strength of the NH–halide hydrogen bond. The Cu^ICl and Cu^IICl complexes are nearly isostructural, the former presenting a highly unusual square‐planar geometry about Cu^I. The geometric constraints provided by secondary interactions are reminiscent of blue copper proteins where a constrained geometry, or entatic state, allows for extremely rapid Cu^I/Cu^II electron‐transfer self‐exchange rates. Cu(H₂Tpy^NMes)Cl shows similar fast electron transfer (≈10⁵ m ^?1 s^?1) which is the same order of magnitude as biological systems.     

Ground state singlet-to-triplet conversion of copper corrole radical by β-benzo-fusion

Materials with facilely tunable spin configurations based on metal-radical coordination systems have potential applications for electronics and spintronics. Here, we report the ground state conversion of copper corrole radicals from singlet to triplet via the extension of the π-conjugation system by benzo-fusion at the β-position of corrole ligand. NMR spectroscopy, SQUID measurements and computational studies all support the ferromagnetic coupling between the Cu(II) center and corrole π-radical of benzo-fused copper corrole 2-Cu, which is in sharp contrast with the antiferromagnetic coupling in regular non-extended copper corroles. The triplet 2-Cu is highly stable in air, and X-ray diffraction analysis revealed its unique highly planar corrole macrocycle. This work offers a promising strategy for creating high-spin systems in non-innocent metallocorroles.     

Synthesis,Crystal Structure,DNA‐binding Properties and Antioxidant Activity of a Copper(II) Complex with Naphthalimide Schiff Base

The Schiff N‐allylamine‐4‐(ethylenediamine‐5‐methylsalicylidene)‐1,8‐naphthalimide (H₂L) and its copper(II) complex, [Cu(HL)₂] · 0.5DMF, were synthesized and characterized. The crystal structure of the Cu^II complex reveals a slightly distorted square‐planar arrangement provided by two N and O donors from two deprotonated ligands. In addition, the DNA‐binding properties of the ligand and Cu^II complex were investigated by fluorescence spectra, electronic absorption, and viscosity measurements. The experimental studies of the DNA‐binding properties indicated that the ligand and Cu^II complex reacted with DNA via intercalation binding mode, and binding affinity for DNA takes the order: ligand > Cu^II complex. The antioxidant assay in vitro suggested that both exhibited potential intensely antioxidant properties, and the ligand is more effective than its Cu^II complex.     

Engaging Copper(III) Corrole as an Electron Acceptor: Photoinduced Charge Separation in Zinc Porphyrin–Copper Corrole Donor–Acceptor Conjugates

An electron‐deficient copper(III) corrole was utilized for the construction of donor–acceptor conjugates with zinc(II) porphyrin (ZnP) as a singlet excited state electron donor, and the occurrence of photoinduced charge separation was demonstrated by using transient pump–probe spectroscopic techniques. In these conjugates, the number of copper corrole units was varied from 1 to 2 or 4 units while maintaining a single ZnP entity to observe the effect of corrole multiplicity in facilitating the charge‐separation process. The conjugates and control compounds were electrochemically and spectroelectrochemically characterized. Computational studies revealed ground state geometries of the compounds and the electron‐deficient nature of the copper(III) corrole. An energy level diagram was established to predict the photochemical events by using optical, emission, electrochemical, and computational data. The occurrence of charge separation from singlet excited zinc porphyrin and charge recombination to yield directly the ground state species were evident from the diagram. Femtosecond transient absorption spectroscopy studies provided spectral evidence of charge separation in the form of the zinc porphyrin radical cation and copper(II) corrole species as products. Rates of charge separation in the conjugates were found to be of the order of 10¹⁰ s^?1 and increased with increasing multiplicity of copper(III) corrole entities. The present study demonstrates the importance of copper(III) corrole as an electron acceptor in building model photosynthetic systems.     

Simplest Monodentate Imidazole Stabilization of the oxy‐Tyrosinase Cu2O2 Core: Phenolate Hydroxylation through a CuIII Intermediate

Tyrosinases are ubiquitous binuclear copper enzymes that oxygenate to Cu^II₂O₂ cores bonded by three histidine Nτ‐imidazoles per Cu center. Synthetic monodentate imidazole‐bonded Cu^II₂O₂ species self‐assemble in a near quantitative manner at ?125 °C, but Nπ‐ligation has been required. Herein, we disclose the syntheses and reactivity of three Nτ‐imidazole bonded Cu^II₂O₂ species at solution temperatures of ?145 °C, which was achieved using a eutectic mixture of THF and 2‐MeTHF. The addition of anionic phenolates affords a Cu^III₂O₂ species, where the bonded phenolates hydroxylate to catecholates in high yields. Similar Cu^III₂O₂ intermediates are not observed using Nπ‐bonded Cu^II₂O₂ species, hinting that Nτ‐imidazole ligation, conserved in all characterized Ty, has functional advantage beyond active‐site flexibility. Substrate accessibility to the oxygenated Cu₂O₂ core and stabilization of a high oxidation state of the copper centers are suggested from these minimalistic models.     

Bismesitoylphosphinic Acid (BAPO‐OH): A Ligand for Copper Complexes and Four‐Electron Photoreductant for the Preparation of Copper Nanomaterials

Bismesitoylphosphinic acid, (HO)PO(COMes)₂ (BAPO‐OH), is an efficient photoinitiator for free‐radical polymerizations of olefins in aqueous phase. Described here are the structures of various copper(II) and copper(I) complexes with BAPO‐OH as the ligand. The complex Cu^II(BAPO‐O)₂(H₂O)₂ is photoactive, and under irradiation with UV light in aqueous phase, it serves as a source of metallic copper in high purity and yield (>80 %). Simultaneously, the radical polymerization of acrylates can be initiated and allows the preparation of nanoparticle/polymer nanocomposites in which the metallic Cu nanoparticles are protected against oxidation. The determination of the stoichiometry of the photoreductions suggests an almost quantitative conversion from Cu^II into Cu⁰ with half an equivalent of BAPO‐OH, which serves as a four‐electron photoreductant.     

Proton Catalysis in the Redox Responsivity of a Mini‐Sized Photochromic Diarylethene

A thermally irreversible dithienylethene (DTE) photochrom can be turned into a thermally reversible one in presence of Cu^II triflate. A ring opening (DTEC closed→DTEO open) occurs through the formation of a copper‐containing fast transient intermediate. Stopped‐flow experiments monitored at 410 and 780 nm have allowed to show that the stoichiometry of this intermediate is DTE/Cu=1:1. At longer monitoring times (i.e., several seconds after mixing), the intermediate undergoes a slow decay while the residual DTEC closed form opens. A joint detailed kinetic and electrochemical analysis has unveiled a proton catalysis scenario in which electron transfer between DTEC and Cu^II, ligand exchange, protonation‐deprotonation equilibria of the cation radicals and ring opening are embedded into two main reaction cycles. At the beginning of the reaction, Cu^II is reduced into Cu^I and DTE is degraded without ring opening. Then, as the reaction progresses, the triflic acid released from the Cu^II reduction switches‐on a propagation cycle during which ring opens without any more Cu^II consumption. Cyclic voltammetry, spectro‐electrochemical measurements, delayed photocoloration experiments in presence of Cu^II and acid–base additions have confirmed the main features of the proton catalysis.     

Synthese,Strukturen und X‐/Q‐Band‐EPR‐Untersuchungen von N,N‐Diethyl‐N′‐3,5‐di(trifluormethyl)benzoylthioureato‐Komplexen des CuII,NiII und PdII sowie EPR‐spektroskopische Charakterisierung eines CuII‐CuII‐Dimers

The synthesis and the structures of (i) the ligand N,N‐Diethyl‐N′‐3,5‐di(trifluoromethyl)benzoylthiourea HEt₂dtfmbtu and (ii) the Ni^II and Pd^II complexes of HEt₂dtfmbtu are reported. The ligand coordinates bidendate forming bis chelates. The Ni^II and the Pd^II complexes are isostructural. The also prepared Cu^II complex could not be characterized by X‐ray analysis. However, the preparation of diamagnetically diluted powders Cu/Ni(Et₂dtfmbtu)₂ and Cu/Pd(Et₂dtfmbtu)₂ suitable for EPR studies was successful. The EPR spectra of the Cu/Ni and Cu/Pd systems show noticeable differences for the symmetry of the CuS₂O₂ unit in both complexes: the Cu/Pd system is characterized by axially‐symmetric g< and A ^cu tensors; for the Cu/Ni system g and A ^Cu have rhombic symmetry. EPR studies on frozen solutions of the Cu^II complex show the presence of a Cu^II‐Cu^II dimer which is the first observed for Cu^II acylthioureato complexes up to now. The parameters of the fine structure tensor were used for the estimation of the Cu^II‐Cu^II distance.     

Adapting Synthetic Models of Heme/Cu Sites to Energy-Efficient Electrocatalytic Oxygen Reduction Reaction

In nature, cytochrome c oxidases catalyze the 4e⁻ oxygen reduction reaction (ORR) at the heme/Cu site, in which Cu^I is used to assist O₂ activation. Because of the thermodynamic barrier to generate Cu^I, synthetic Fe-porphyrin/Cu complexes usually show moderate electrocatalytic ORR activity. We herein report on a Co-corrole/Co complex 1-Co for energy-efficient electrocatalytic ORR. By hanging a Co^II ion over Co corrole, 1-Co realizes electrocatalytic 4e⁻ ORR with a half-wave potential of 0.89 V versus RHE, which is outstanding among corrole-based electrocatalysts. Notably, 1-Co outperforms Co corrole hanged with Cu^II or Zn^II. We revealed that the hanging Co^II ion can provide an electron to improve O₂ binding thermodynamically and dynamically, a function represented by the biological Cu^I ion of the heme/Cu site. This work is significant to present a remarkable ORR electrocatalyst and to show the vital role of a second-sphere redox-active metal ion in promoting O₂ binding and activation.     

Molecular CuII‐O‐CuII Complexes: Still Waters Run Deep

Research on O₂ activation at ligated Cu^I is fueled by its biological relevance and the quest for efficient oxidation catalysts. A rarely observed reaction is the formation of a Cu^II‐O‐Cu^II species, which is more special than it appears at first sight: a single oxo ligand between two Cu^II centers experiences considerable electron density, and this makes the corresponding complexes reactive and difficult to access. Hence, only a small number of these compounds have been synthesized and characterized unequivocally to date, and as biological relevance was not apparent, they remained unappreciated. However, recently they moved into the spotlight, when Cu^II‐O‐Cu^II cores were proposed as the active species in the challenging oxidation of methane to methanol at the surface of a Cu‐grafted zeolite and in the active center of the copper enzyme particulate methane monooxygenase. This Minireview provides an overview of these systems with a special focus on their reactivity and spectroscopic features.     

Visible‐Light‐Accelerated Copper(II)‐Catalyzed Regio‐ and Chemoselective Oxo‐Azidation of Vinyl Arenes

The visible‐light‐accelerated oxo‐azidation of vinyl arenes with trimethylsilylazide and molecular oxygen as stoichiometric oxidant was achieved. In contrast to photocatalysts based on iridium, ruthenium, or organic dyes, [Cu(dap)₂]Cl or [Cu(dap)Cl₂] were found to be unique for this transformation, which is attributed to their ability to interact with the substrates through ligand exchange and rebound mechanisms. Cu^II is proposed as the catalytically active species, which upon coordinating azide will undergo light‐accelerated homolysis to form Cu^I and azide radicals. This activation principle (Cu^II‐X→Cu^I+X^.) opens up new avenues for copper‐based photocatalysis.     

Synthesis,Characterization, DNA‐binding Properties,and ­Antioxidant Activity of a Copper(II) Complex with 1, 3‐Bis­(1‐allaylbenzimidazol‐2‐yl)‐2‐oxopropane

A new complex of copper(II) picrate (pic) with 1, 3‐bis(1‐allaylbenzimidazol‐2‐yl)‐2‐oxopropane (aobb), with the composition [Cu(aobb)₂](pic)₂, was synthesized and characterized. The crystal structure of the copper(II) complex revealed that the coordination environment around the central copper(II) atom is a distorted octahedral arrangement. Electronic absorption spectroscopy, ethidium bromide displacement experiments and viscosity measurements indicate that the ligand and the Cu^II complex can strongly bind to calf thymus DNA, presumably by an intercalation mechanism. Furthermore, the antioxidant activity of the Cu^II complex was determined by superoxide and hydroxyl radical scavenging method in vitro, which indicate that the Cu^II complex has the activity to suppress OH ^· and O₂ ^{· –}.     

catena‐Poly[copper(II)‐μ‐l‐tyrosyl‐l‐leucinato]

In the title compound, [Cu(C₁₅H₂₀N₂O₄)]_n, the copper(II) coordination is square planar. The anionic l ‐tyrosyl‐l ‐leucinate ligand binds in an N,N′,O‐tridentate mode to one Cu^II cation on one side and in an O‐monodentate mode to a second Cu^II cation on the other side, thus defining –Cu—O—C—O—Cu′– chains which run along the a axis. These chains are held together by a strong hydrogen bond involving the hydroxy H atom.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

A one‐dimensional coordination polymer of 5‐[(imidazol‐1‐yl)methyl]benzene‐1,3‐dicarboxylic acid with CuII cations

5‐[(Imidazol‐1‐yl)methyl]benzene‐1,3‐dicarboxylic acid (H₂L) was synthesized and the dimethylformamide‐ and dimethylacetamide‐solvated structures of its adducts with Cu^II, namely catena‐poly[[copper(II)‐bis[μ‐3‐carboxy‐5‐[(imidazol‐1‐yl)methyl]benzoato]] dimethylformamide disolvate], {[Cu(C₁₂H₉N₂O₄)₂]·2C₃H₇NO}_n, (I), and catena‐poly[[copper(II)‐bis[μ‐3‐carboxy‐5‐[(imidazol‐1‐yl)methyl]benzoato]] dimethylacetamide disolvate], {[Cu(C₁₂H₉N₂O₄)₂]·2C₄H₉NO}_n, (II), the formation of which are associated with mono‐deprotonation of H₂L. The two structures are isomorphous and isometric. They consist of one‐dimensional coordination polymers of the organic ligand with Cu^II in a 2:1 ratio, [Cu(μ‐HL)₂]_n, crystallizing as the dimethylformamide (DMF) or dimethylacetamide (DMA) disolvates. The Cu^II cations are characterized by a coordination number of six, being located on centres of crystallographic inversion. In the polymeric chains, each Cu^II cation is linked to four neighbouring HL⁻ ligands, and the organic ligand is coordinated via Cu—O and Cu—N bonds to two Cu^II cations. In the corresponding crystal structures of (I) and (II), the coordination chains, aligned parallel to the c axis, are further interlinked by strong hydrogen bonds between the noncoordinated carboxy groups in one array and the coordinated carboxylate groups of neighbouring chains. Molecules of DMF and DMA (disordered) are accommodated at the interface between adjacent polymeric assemblies. This report provides the first structural evidence for the formation of coordination polymers with H₂Lvia multiple metal–ligand bonds through both carboxylate and imidazole groups.     

Contractile and Extensible Molecular Figures‐of‐Eight

Two large rings, 66‐ (m‐66 ) and 78‐membered ( m‐78 ) rings, each one incorporating two pairs of transition‐metal‐complexing units, have been prepared. The coordinating fragments are alternating bi‐ and tridentate chelating groups, namely, 2,9‐diphenyl‐1,10‐phenanthroline (dpp) and 2,2′,2′,6′′‐terpyridine (terpy) respectively. Both macrocycles form molecular figures‐of‐eight in the presence of Fe^II, affording a classical bis‐terpy complex as the central core. The larger m‐78 ring can accommodate a four‐coordinate Cu^I center with the formation of a {Cu(dpp)₂}⁺ central complex and a highly twisted figure‐of‐eight backbone, whereas m‐66 is too small to coordinate Cu^I. Macrocycle m‐78 thus affords stable complexes with both Fe^II and Cu^I; the ligand around the metal changes from (terpy)₂ to (dpp)₂. This bimodal coordination situation allows for a large amplitude rearrangement of the organic backbone. When coordinated to preferentially octahedrally coordinated Fe^II or Cu^II, the height of the molecule along the coordinating axis of the tridentate terpy ligands is only about 11 Å, whereas the height of the molecule along the same vertical axis is several times as large for the tetrahedral Cu^I complex. Chemically or electrochemically driven contraction and extension motions along a defined axis make this figure‐of‐eight particularly promising as a new class of molecular machine prototype for use as a constitutive element in muscle‐like dynamic systems.