Cuprous Oxide Catalyzed Oxidative CC Bond Cleavage for CN Bond Formation: Synthesis of Cyclic Imides from Ketones and Amines

Selective oxidative cleavage of a C? C bond offers a straightforward method to functionalize organic skeletons. Reported herein is the oxidative C? C bond cleavage of ketone for C? N bond formation over a cuprous oxide catalyst with molecular oxygen as the oxidant. A wide range of ketones and amines are converted into cyclic imides with moderate to excellent yields. In‐depth studies show that both α‐C? H and β‐C? H bonds adjacent to the carbonyl groups are indispensable for the C? C bond cleavage. DFT calculations indicate the reaction is initiated with the oxidation of the α‐C? H bond. Amines lower the activation energy of the C? C bond cleavage, and thus promote the reaction. New insight into the C? C bond cleavage mechanism is presented.     

Cuprous Oxide Catalyzed Oxidative C?C Bond Cleavage for C?N Bond Formation: Synthesis of Cyclic Imides from Ketones and Amines

Selective oxidative cleavage of a C C bond offers a straightforward method to functionalize organic skeletons. Reported herein is the oxidative C C bond cleavage of ketone for C N bond formation over a cuprous oxide catalyst with molecular oxygen as the oxidant. A wide range of ketones and amines are converted into cyclic imides with moderate to excellent yields. In‐depth studies show that both α‐C H and β‐C H bonds adjacent to the carbonyl groups are indispensable for the C C bond cleavage. DFT calculations indicate the reaction is initiated with the oxidation of the α‐C H bond. Amines lower the activation energy of the C C bond cleavage, and thus promote the reaction. New insight into the C C bond cleavage mechanism is presented.     

Temperature requirements for thermal modulation in comprehensive two-dimensional gas chromatography

Temperature requirements for trapping and release of compounds in a cryogenic gas loop-type GC x GC modulator were determined. Maximum trapping temperatures on the uncoated, deactivated modulator capillary were determined for compounds from C4 (bp -0.5 degrees C) to C40 (bp 522 degrees C). The liquid-nitrogen cooled gas flow rate was reduced from a high of 15.5 to 1.5 SLPM over the range to achieve the required trapping temperature. Excessive cold jet flow rates caused irreversible trapping and peak tailing for semi-volatile compounds above C26. Alternate cold jet coolants were investigated. An ice water-cooled jet was able to trap compounds with boiling points from C18 (bp 316 degrees C) to C40 and a room temperature air-cooled jet was able to trap compounds from C20 (bp 344 degrees C) to C40. The hot jet produced launch temperatures approximately 40 degrees C hotter than the elution temperature with heating time constants of 8 to 27 ms. Modulated compound peaks were symmetrical with half-height peak widths of 43 to 56 ms for compounds with little second column retention, and 70 to 75 ms for compounds with more second column retention. The liquid nitrogen-cooled loop modulator with gas flow programming was used to produce a GC x GC chromatogram for a crude oil that contained compounds from C7 to C47.     

Mechanistic Studies of the Radical S‐Adenosylmethionine Enzyme DesII with TDP‐D‐Fucose

DesII is a radical S‐adenosylmethionine (SAM) enzyme that catalyzes the C4‐deamination of TDP‐4‐amino‐4,6‐dideoxyglucose through a C3 radical intermediate. However, if the C4 amino group is replaced with a hydroxy group (to give TDP‐quinovose), the hydroxy group at C3 is oxidized to a ketone with no C4‐dehydration. It is hypothesized that hyperconjugation between the C4 C? N/O bond and the partially filled p orbital at C3 of the radical intermediate modulates the degree to which elimination competes with dehydrogenation. To investigate this hypothesis, the reaction of DesII with the C4‐epimer of TDP‐quinovose (TDP‐fucose) was examined. The reaction primarily results in the formation of TDP‐6‐deoxygulose and likely regeneration of TDP‐fucose. The remainder of the substrate radical partitions roughly equally between C3‐dehydrogenation and C4‐dehydration. Thus, changing the stereochemistry at C4 permits a more balanced competition between elimination and dehydrogenation.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Characterization of soil organic matter fractions from grassland and cultivated soils via C content and delta13C signature

Variations in (13)C natural abundance and distribution of total C among five size and density fractions of soil organic matter, water soluble organic C (WSOC) and microbial biomass C (MBC) were investigated in the upper layer (0-20 cm) of a continuous grassland soil (CG, C(3) vegetation), a C(3)-humus soil converted to continuous maize cultivation (CM, C(4) vegetation) and a C(3)-humus soil converted to a rotation of maize cultivation and grassland (R). The amounts of WSOC and MBC were both significantly larger in the CG than in the CM and the R. In the three soils, WSOC was depleted while MBC was enriched in (13)C as compared with whole soil C. The relative contributions to the total C content of C stored in the macro-organic matter and in the size fraction 50-150 microm decreased with decreasing total C contents in the order CG > R > CM, while the relative contribution of C associated with the clay- and silt-sized fraction <50 microm increased. This reflects a greater stability and physical protection against microbial degradation associated with soil disruption (tillage) of the clay- and silt-associated organic C, in relation to the organic C in larger size fractions. The size and density fractions from the CG soil showed significant differences in (13)C enrichment, indicating different degrees of microbial degradation and stability of soil organic C associated with physically different soil organic matter (SOM) fractions. Delta(13)C analysis of the size and density fractions from CM and R soils reflected a decreasing turnover rate of soil organic C with increasing density among the macro-organic matter fractions and with decreasing particle size.     

Gentamicin assay in human serum by solid-phase extraction and capillary electrophoresis

We describe the development of a capillary electrophoresis method for the determination of gentamicin C1, C1a, C2a, and C2 components in human serum. Using a weak cation-exchanger with 20 mM phosphate buffer, pH 7.4, 200 mM borate buffer, pH 9.0, and ammonia/methanol, solid-phase extraction (SPE) of gentamicin components from the human sera was performed. The extract was derivatized with 1,2-phthalic dicarboxaldehyde/mercaptoacetic acid reagent. The derivatives were separated with a background electrolyte comprising 60 mM 2-(N-cyclohexylamino)ethanesulfonic acid (CHES) buffer at pH 9.5 containing 31.6% m/v methanol, and quantified with UV-light absorption detection at 230 nm. The identity of the gentamicin components was confirmed by mass spectrometry. The SPE recovery of the gentamicin ranged from 78% to 93%. The calibration curves were linear from the concentration limit of quantitation (LOQ) to 30 mg/L for the gentamicin mixture. The LOQ for gentamicin C1 was 0.33 mg/L, for C2a 0.23 mg/L, C2 0.25 mg/L, C1a 0.27 mg/L and the concentration limit of detection (LOD) for C1 was 0.15 mg/L, C2a 0.11 mg/L, C2 0.12 mg/L, C1a 0.13 mg/L. Intra-assay relative standard deviation (RSD) values were for C1 (5%), C1a (7%), C2 (6.5%) and C2a (9%); inter-assay RSD values were for C1 (11%), C1a (13.3%), C2 (15%) and C2a (14%). The Pearson's correlation between capillary electrophoresis and immunoassay revealed a linear relationship between these two techniques with r = 0.9. This method for determination of gentamicin C1, C1a, C2a, and C2 in human serum can thus be used in the entire therapeutic concentrations range of gentamicin.     

Synthesis of 11C-labelled N,N'-diphenylurea and ethyl phenylcarbamate by a rhodium-promoted carbonylation via [11C]isocyanatobenzene using phenyl azide and [11C]carbon monoxide

The reaction with phenyl azide and [11C]carbon monoxide to give N,N'-diphenyl[11C]urea and ethyl phenyl[11C]carbamate has been studied with the aim of development of a new methodology for carbonylation using [11C]carbon monoxide with high specific radioactivity. The synthesis of 11C-labelled N,N'-diphenylurea from phenyl azide and [11C]carbon monoxide, with 1,2-bis(diphenylphosphino)ethane-bound Rh(I) complex at 120 degrees C at a pressure of 35 MPa in the presence of aniline was accomplished in 82% trapping efficiency and 82% conversion yield. This approach was also useful for the synthesis of ethyl phenyl[11C]carbamate with lithium ethoxide as a nucleophilic reagent giving 90% trapping efficiency and 76% conversion yield. These reactions can be considered to proceed via a [11C]isocyanate or a [11C]isocyanate-coordinated Rh complex to give the corresponding 11C-products. This protocol provides the chemical basis for the synthesis of [11C]urea and [11C]carbamate derived from [11C]isocyanates.     

C~4~0, C~4~0^+, Nb@C~4~0^+, NbC~3~9^+, Nb@C~4~0H~4^+的 量子化学研究

用量子化学从头计算方法研究了C~4~0,C~4~0^+,Nb@C~4~0^+,NbC~3~9^+,Nb@C~4~0H~4^+的几何构型、电子结构和C~2~8一样,C~4~0(T~d)基态也为^5A~2态,笼骨架上具有四个悬挂键。计算结果表明C~4~0和C~4~0^+比NbC~3~9^+和Nb@C~4~0^+稳定,与实验结果一致。     

Selective extraction of higher fullerenes using cyclic dimers of zinc porphyrins

Higher fullerenes (>/=C76) were selectively extracted from a fullerene mixture obtained from a combustion-based industrial production source by cyclic dimers of beta-unsubstituted porphyrin zinc complexes 2C5-2C7 with C5-C7 alkylene spacers as host molecules. Results of single extraction of the fullerene mixture with 2C5-2C7 together with a beta-substituted analogue of 2C6 (1C6) and spectroscopic titration of 2C6 and 1C6 with C60, C70, and C96 indicated that the host selectivity toward higher fullerenes is much dependent on the structure of the porphyrin units and the size of the host cavity. Sequential three-stage extraction of the fullerene mixture with the best-behaved 2C6 resulted in considerable enrichment in very rare fullerenes C102-C110 (<0.1 abs %) up to 82 abs % (C76-C114, 99 abs %) (356 nm) of total fullerenes.     

Gold‐Catalyzed Formal C−C Bond Insertion Reaction of 2‐Aryl‐2‐diazoesters with 1,3‐Diketones

The transition‐metal‐catalyzed formal C−C bond insertion reaction of diazo compounds with monocarbonyl compounds is well established, but the related reaction of 1,3‐diketones instead gives C−H bond insertion products. Herein, we report a protocol for a gold‐catalyzed formal C−C bond insertion reaction of 2‐aryl‐2‐diazoesters with 1,3‐diketones, which provides efficient access to polycarbonyl compounds with an all‐carbon quaternary center. The aryl ester moiety plays a crucial role in the unusual chemoselectivity, and the addition of a Brønsted acid to the reaction mixture improves the yield of the C−C bond insertion product. A reaction mechanism involving cyclopropanation of a gold carbenoid with an enolate and ring‐opening of the resulting donor–acceptor‐type cyclopropane intermediate is proposed. This mechanism differs from that of the traditional Lewis‐acid‐catalyzed C−C bond insertion reaction of diazo compounds with monocarbonyl compounds, which involves a rearrangement of a zwitterion intermediate as a key step.     

Theoretical studies of structures and stabilities of a new odd-numbered fullerene dimer: C141

The possible isomers of a newly synthesized C(141) molecule are calculated using MNDO, AM1, PM3, B3LYP/3-21G, and B3LYP/6-31G(d) methods. The geometry optimizations showed that the isomer 8-8 has the lowest total energy in all 64 possible structures of C(141). Unlike those of C(130), C(140), etc., the C(141) 8-8 shows a new structure: two C(70) side cages open [6.6] ring junctions located at the equator (instead of cap) area to create new chemical bonds for the bridge atom. Theoretical measurements of the average length of the long and short axes of C(70) side cages in the C(141) molecule reveal that when two C(70) cages are connected with each other at the equators, their geometric shapes become more spherical compared with the pristine C(70); this leads to a reduction of the molecular polarizability. Analysis of the local and global strain indicates that the global strain of C(70) monomer in the C(141) 8-8 is greatly reduced compared to the pristine C(70). The stable C(70) derivatives that are formed with reacted C-C bonds in the equator area may put new insights into fullerene chemistry, in particular, for C(70) to react with a large molecule. The results are discussed together with the experimental data.     

A synthetic approach to the phorboxazoles – A strategy for the synthesis of the C1–C19 polyketide fragment

A synthetic approach to the C1–C19 polyketide fragment of the phorboxazoles is disclosed here. While an initial two-directional approach was efficient, it did not proceed in a high enough yield to justify moving forward. A subsequent successful strategy for the generation of the C11–C15 pyrans of both of the phorboxazoles was achieved, and the installation of the C9 stereocenter was able to be demonstrated. Furthermore, an efficient route for the preparation of the C1–C8 fragment with suitable functionality to allow for elaboration into the complete C1–C19 fragment, with the capricious C2–C3 Z-geometry installed, was also achieved.     

界面衍生化气相色谱法测定葡萄酒中总有机酸

利用离子交换树脂分离、富集葡萄酒中总有机酸并直接在树脂界面上乙酯化,结合气相色谱／质谱法,鉴定并分析了葡萄酒中２１种有机酸。     

Synthesis and reactions of group 6 metal half-sandwich complexes of 2,2-dicyanoethylene-1,1-dichalcogenolates [(Cp*)M[E(2)C=C(CN)(2)](2)]-(M = Mo,W; E = S,Se)

A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of Cp*MCl(4)(Cp* = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of Cp*MCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[Cp*M(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of Cp*MoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3a) and K[Cp*Mo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[Cp*Mo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[Cp*W(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of Cp*WCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [Cp*W(Se(2)C=C(CN)(2))(2)]-, [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [Cp*W(Se(Se(2))C=C(CN)(2))(2)]-, of which [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to K[Cp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2))](6), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(Cp*Mo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two Cp*Mo units bridged by a Se(2-) and a [Se(Se(3))C=C(CN)(2)](2-) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [Cp*WCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.     

Dry synthesis of triple cumulative double bonds (C=C=C=N) on Si(111)-7 x 7 surfaces

The interactions of cyanoacetylene and diacetylene with a Si(111)-7 x 7 surface have been studied as model systems to mechanistically understand the chemical binding of unsaturated organic molecules to diradical-like silicon dangling bonds. Vibrational studies show that cyanoacetylene mainly binds to the surface through a diradical reaction involving both cyano and C[triple bond]C groups with an adjacent adatom-rest atom pair at 110 K, resulting in an intermediate containing triple cumulative double bonds (C=C=C=N). On the other hand, diacetylene was shown to the covalently attached to Si(111)-7 x 7 only through one of its C[triple bond]C groups, forming an enynic-like structure with a C=C-C[triple bond]C skeleton. These chemisorbed species containing triple cumulative double bonds (C=C=C=N) and C=C-C[triple bond]C may be employed as precursors (or templates) for further construction of bilayer organic films on the semiconductor surfaces.     

Cholesteric induction power of β-galactose derivatives

Galactose derivatives were explored as chiral dopants, effective for inducing chiral nematic liquid crystal (LC) phases. Galactose bearing O-isopropylidene substituents at the C3 and C4 and butoxybiphenyl substituents at the C2 and C6 positions exhibits a high helical twisting power (HTP) value of ?74.4 μm^?1. Such a high HTP value for the galactose derivative is attributed to (1) linkage of the C3 and C4 carbons with the O-isopropylidene substituent, which places the C2 and C6 substitutes in a skew arrangement at a large angle and (2) enhancement of the affinity with the host nematic LCs by incorporating aromatic substituents at the C2 and C6 positions that are similar to those in the host.     

Infrared absorption of C6H5SO2 detected with time-resolved Fourier-transform spectroscopy

C6H5SO2 radicals were produced upon irradiation of three flowing mixtures: C6H5SO2Cl in N2, C6H5Cl and SO2 in CO2, and C6H5Br and SO2 in CO2, with a KrF excimer laser at 248 nm. A step-scan Fourier-transform spectrometer coupled with a multipass absorption cell was employed to record the time-resolved infrared (IR) absorption spectra of reaction intermediates. Two transient bands with origins at 1087.7 and 1278.2 cm-1 are assigned to the SO2-symmetric and SO2-antisymmetric stretching modes, respectively, of C6H5SO2. Calculations with density-functional theory (B3LYP/aug-cc-pVTZ and B3P86/aug-cc-pVTZ) predict the geometry and vibrational wave numbers of C6H5SO2 and C6H5OSO. The vibrational wave numbers and IR intensities of C6H5SO2 agree satisfactorily with the observed new features. Rotational contours of IR spectra of C6H5SO2 simulated based on predicted molecular parameters agree satisfactorily with experimental results for both bands. The SO2-symmetric stretching band is dominated by a- and c-type rotational structures and the SO2-antisymmetric stretching band is dominated by a b-type rotational structure. When C6H5SO2Cl was used as a precursor of C6H5SO2, C6H5SO2Cl was slowly reproduced at the expense of C6H5SO2, indicating that the reaction Cl+C6H5SO2 takes place. When C6H5Br/SO2/CO2 was used as a precursor of C6H5SO2, features at 1186 and 1396 cm-1 ascribable to C6H5SO2Br were observed at a later period due to secondary reaction of C6H5SO2 with Br. Corresponding kinetics based on temporal profiles of observed IR absorption are discussed.     

Total synthesis of phorboxazole A. 2. Assembly of subunits and completion of the synthesis

[Structure: see text] Subunits of phorboxazole A containing C1-C2, C3-C8, C9-C19, C20-C32, C33-C41, and C42-C46 were connected in a sequence that first linked C32 with C33 and then C41 with C42. A C3-C8 fragment was joined to C9-C19, and the assembled unit was then joined with the left half of 1. Closure of the macrolide was accomplished by esterification of the C24 alcohol followed by intramolecular Horner-Wadsworth-Emmons condensation to set the (E)-C2-C3 alkene.     

Gas-phase ion/molecule reactions in C5F8

Gas-phase ion-molecule reactions in octafluorocyclopentene (C5F8) were studied with a pulsed electron beam mass spectrometer. When a few Torr of major gas, CH4, Ar, or N2, containing approximately 10 mTorr C5F8 was ionized by 2 keV electrons, C5F8+, C5F7+, C4F6+, C4F5+, and C3F3+ were formed as major fragment ions. The interaction between those ions and C5F8 is found to be a weak electrostatic interaction. The cation...C5F8 bonding energies are around 10 kcal/mol, which were reproduced well by (U)B3LYP/6-311+G(d) calculations. The proton affinity of C5F8 (=148.6 kcal/mol by B3LYP/6-311+G(d)) was found to be smaller than that of C2H4 (=162.8 kcal/mol). In the negative mode of operation, the intense signal of C5F8- was observed during the electron pulse. This indicates that C5F8 has a positive electron affinity (1.27 eV by (U)B3LYP/6-311+G(d)). The C5F8- ion was quickly converted to a complex C10F16-. This complex did not react further with C5F8 down to 170 K. The theoretical calculation revealed that a C5F7-F-...C5F8 interaction mode in (C5F8)2- was converted to a C5F7*...C5F9- one via fluoride-ion transfer. The F- ion was found to form a strong covalent bond with C5F8, but the interaction in F-(C5F8)- - -C5F8 is a weak electrostatic interaction due to the charge dispersal in F-(C5F8). The halide ions except F- interact with C5F8 only weakly. Thermochemical stabilities for the cluster ions I-(CH3I)n (n = 1, 2) were also determined.