Conformational analysis of dipeptide‐derived polyisocyanides

The conformational properties of polymers derived from isocyanodipeptides have been investigated with a combination of model calculations, X‐ray diffraction, and circular dichroism spectroscopy. Depending on the configuration of the side chains, defined arrays of hydrogen bonds along the polymeric backbone are formed. This leads to a well‐defined conformation as, for example, expressed in the formation of lyotropic liquid‐crystalline phases and increased helical stability. Upon the disruption of the hydrogen bonds by a strong acid, a less well‐defined macromolecular conformation is observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1725–1736, 2003     

Pendant side‐chain sterics against electrostatic forces: Influencing short‐range ordering in random polyelectrolytes

The length of pendant side chains in charged, random, comb‐shaped polymers dictates the nature of their short‐range ordering. Random copolymers, and terpolymer, of 4‐vinylpyridine (4VP), styrene, and isoprene were synthesized and subsequently fully quaternized with 1‐alkylbromides having varying number of carbons on the alkyl group ranging from 2 to 8. Evaluation by wide angle X‐ray scattering revealed that dipole–dipole attraction facilitates the formation of ionomer cluster morphology in samples with two carbons on the pendant side chain, whereas for samples with four or more carbons on the pendant side chains, side‐chain sterics was dominant resulting in periodic backbone spacing. Copolymers with isoprene, having flexible backbones, favor the formation of ionomer cluster morphology while styrene copolymers having rigid backbones disfavor the formation of ionomer clusters. An “in‐line” dipole model was developed to predict the separation distance at which both ionomer cluster and backbone–backbone morphologies could coexist. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1325–1336     

Synthesis of well‐defined comb‐like graft (co)polymers by nucleophilic substitution reaction between living polymers and polyhalohydrocarbon

A series of graft (co)polymers were synthesized by nucleophilic substitution reaction between iodinated 1,2‐polybutadiene (PB‐I, backbone) and living polymer lithium (side chains). The coupling reaction between PB‐I and living polymers can finish within minutes at room temperature, and high conversion (up to 92%) could be obtained by effectively avoiding side reaction of dimerization when living polymers were capped with 1,1‐diphenylethylene. By virtue of living anionic polymerization, backbone length, side chain length, and side chain composition, as well as graft density, were well controlled. Tunable molecular weight of graft (co)polymers with narrow molecular weight distribution can be obtained by changing either the lengths of side chain and backbone, or the graft density. Graft copolymers could also be synthesized with side chains of multicomponent polymers, such as block polymer (polystyrene‐b‐polybutadiene) and even mixed polymers (polystyrene and polybutadiene) as hetero chains. Thus, based on living anionic polymerization, this work provides a facile way for modular synthesis of graft (co)polymers via nucleophilic substitution reaction between living polymers and polyhalohydrocarbon (PB‐I). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Stimuli‐responsive brush‐shaped conjugated polymers with pendant well‐defined poly(vinyl ether)s

For the synthesis of brush‐shaped conjugated polymers consisting of a poly(phenylene butadiynylene) backbone and well‐defined poly(vinyl ether) (polyVE) side chains, we designed polyVE‐based macromonomers bearing a diethynyl benzene group at the terminus and applied them to the grafting through synthesis. The macromonomer (DE‐PIBVE) was synthesized by living cationic polymerization of isobutyl VE (IBVE) using a functionalized initiator (TMS‐DEVE‐TFA) having a TMS protected diethynyl benzene moiety, followed by deprotection of the TMS groups. As a result, we succeeded in the synthesis of the target brush‐shaped conjugated polymers [poly(DE‐PIBVE)] by oxidative coupling reaction of the diethynyl benzene groups. We found that the solution of poly(DE‐PIBVE) with a specific side chain length exhibited solvatochromism and thermochromism depending on the polarity of the media employed. This phenomenon was attributed to self‐assembly in polar media due to the intermolecular π–π interaction between neighboring conjugated polymer backbones, where the self‐assembly behavior would be closely related to the pendant polyVE structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3318–3325     

Cysteine‐Containing Polyisocyanides as Versatile Nanoplatforms for Chromophoric and Bioscaffolding

The straightforward syntheses of polyisocyanides containing the alanine–cysteine motif in their side chains have been achieved. Detailed characterization of the polymers revealed a well‐defined and highly stable helical conformation of the polyimine backbone responsible for the formation of rodlike structures of over one hundred nanometers. The 4₁ helix is further stabilized by β‐sheet‐like interactions between the peptide arms. As a result, the cysteine sulfur atoms are regularly aligned along the polymer axis, which provides a unique platform for the scaffolding of various entities by using versatile click‐chemistry postmodification approaches. For instance, pyrene derivatives were introduced through thio‐specific reactions involving either maleimide, iodoacetamide, or thioester groups, leading to arrays of stacked chromophores with excimer‐like emission. A water‐soluble cysteine‐rich polyisocyanide was successfully biotinylated and coupled to streptavidin.     

Small‐angle neutron scattering analysis of bottlebrush backbone and side chain flexibility

Bottlebrush polymers have densely tethered side chains grafted to a linear polymer backbone, resulting in stretching of both the side chains and backbone. Prior studies have reported that the side chains are only weakly stretched while the backbone is highly elongated. Here, scaling laws for the bottlebrush backbone and side chains are determined through small‐angle neutron scattering analysis of a systematic series of poly(lactic acid) bottlebrush polymers synthesized via a “grafting‐through” ring‐opening polymerization. Scattering profiles are modeled with the empirical Guinier–Porod, rigid cylinder, and flexible cylinder models. Side chains are found to be only weakly stretched, with an end‐to‐end distance proportional to N^0.55, while the overall bottlebrush increases in size proportional to N^0.77. These results demonstrate that the bottlebrush backbone is not fully extended and that both side chains and backbone have significant conformational flexibility in solution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 104–111     

Morphological studies of blends of conjugated polymers and acceptor molecules using langevin dynamics simulations

We use coarse‐grained Langevin dynamics simulations of blends of generic conjugated polymers and acceptor molecules to show how architecture (e.g., side chains, backbone flexibility of oligomers) and the pair‐wise interactions between the constituents of the blend affect morphology and phase transition. Alkyl side chains on the conjugated oligomer backbones shift the liquid crystal (LC) transition temperature from that of bare conjugated backbones and the direction of the shift depends on backbone–backbone interactions. Rigid backbones and constrained side chains cause a layer‐by‐layer morphology of conjugated polymers and amorphous acceptors, whereas flexible backbones and unconstrained side chains facilitate highly ordered acceptor arrangement. Strong backbone–backbone attraction shifts LC transition to higher temperatures than weak backbone–backbone attraction, and strong acceptor–acceptor attraction increases acceptor aggregation. Pure macro‐phase separated domains form when all pair‐wise interactions in the blend are strongly attractive, whereas interconnected domains form at intermediate acceptor–acceptor attraction and strong polymer–polymer attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Estimating the Polydispersity of GPC Slices Due to Coeluting Comb‐Polymers Synthesized by Grafting Monodisperse Side Chains Onto a Backbone Having Broad Molecular Weight Distribution

The molecular weight distribution, polydispersity and the distribution of side chains within a GPC‐slice have been calculated for coeluting comb‐shaped polymers. It is assumed that the polymers were synthesized by grafting monodisperse side chains onto a backbone having a broad molecular weight distribution. Despite the broad polydispersity of the backbone the polydispersity within a GPC‐slice is rather narrow, as is the distribution of side chains. Consequently the effect of polydispersity on properties, which can be obtained by GPC coupled with molar mass sensitive detectors is negligible. However, this result is true only for the specific branching mechanism investigated.     

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

Conformational properties and dynamics of molecular bottle‐brushes: A cellular‐automaton‐based simulation

Extensive computer simulation was performed using the bond‐fluctuation model and cellular‐automaton (CA)‐based simulation technique to probe the equilibrium structure and dynamical behavior of comb‐branched polymers in which the flexible side chains of a given length are placed regularly along the backbone and the number of branches increases linearly with total molecular weight. By applying very efficient CA algorithm – the “lattice molecular dynamics” (LMD) method – we have been able to study the properties of sufficiently large structures (up to 5880 monomeric units). Depending on the length of main and side chains as well as on interbranch spacing, we have calculated mean chain dimensions, local fractal dimensionalities, particle scattering functions, time autocorrelation functions, etc. The following main conclusions may be drawn from the results presented in our study: (i) The critical exponent, governing the mean size of the main chain, remains unchanged from its value known for a 3d self‐avoiding walk (SAW). On the other hand, two‐dimensional branched macromolecules with one‐sided branches are effectively in a collapsed state even under conditions of a good solvent, forming specific helical superstructures. (ii) Comparison of the simulated data with the predictions of the scaling model indicates that the latter is valid in describing the mean dimensions of the backbone as a function of side‐chain length and interbranch spacing. (iii) The excluded volume interaction between side chains dramatically slows down the relaxation of the backbone chain.     

Star‐like PAA‐g‐PPO well‐defined amphiphilic graft copolymer synthesized by ATNRC and SET‐NRC reaction

A series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (M_w/M_n = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (M_w/M_n = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010     

Solvent‐induced self‐assembly in cardanol‐based urethane methacrylate comb polymers

We report side chain urethane–methacrylate comb polymers based on the renewable resource cardanol and its saturated analogue 3‐pentadecyl phenol and their self‐assembly into pores, spheres, vesicles, tubes, and so forth. The monomers were synthesized in one pot by coupling 1 equiv. of isophorone diisocyanate with 1 equiv. of cardanol/pentadecyl phenol followed by coupling with 1 equiv. of hydroxyethyl methacrylate. They were polymerized free radically using benzoyl peroxide as the initiator and were characterized by NMR and FTIR, and their molecular weights were determined by gel permeation chromatography. The unique polymer design had sites for self‐organization via hydrogen bonding of the side chain urethane units, π–π stacking interactions of the aromatic units as well as interdigitation of the long C₁₅ alkyl side chains in the polymer. The morphologies of solvent cast polymer films were studied using microscopic techniques such as scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The polymers exhibited three‐dimensional honeycomb morphology in CHCl₃, whereas in tetrahydrofuran, they formed spheres. The direct cardanol‐derived polymer PCIH showed a tendency for multiple morphologies such as spheres and tubes in tetrahydrofuran. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2996–3009, 2009     

Side chain length affects backbone dynamics in poly(3‐alkylthiophene)s

Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T₁) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1193–1202     

Peptide‐Assisted Design of Precision Polymer Sequences: On the Relevance of the Side‐Chain Sequences and the Variability of the Backbone

Functional sequences of monodisperse, sequence‐defined oligo(amide‐urethane)s are designed based on a peptide sequence as blueprint. The translation of a discrete side‐chain functionality sequence from a known peptide‐based solubilizer of the photosensitizer meta‐tetra(hydroxyphenyl)‐chlorin, into a non‐peptidic precision polymer backbone is demonstrated. The resulting peptidomimetic precision polymers retain the functions of the parent peptide sequence, showing analogues sensitivity toward single monomer mutations/exchanges and even exceeding the parent peptide equivalent by reaching up to 69% higher payload capacities and more favored release kinetics.     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

ATNRC and SET‐NRC synthesis of PtBA‐g‐PEO well‐defined amphiphilic graft copolymers

A series of new well‐defined amphiphilic graft copolymers containing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) side chains were reported. Reversible addition‐fragmentation chain transfer homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was first performed to afford a well‐defined backbone with a narrow molecular weight distribution (M_w/M_n = 1.07). The target poly(tert‐butyl acrylate)‐g‐poly(ethylene oxide) (PtBA‐g‐PEO) graft copolymers with low polydispersities (M_w/M_n = 1.18–1.26) were then synthesized by atom transfer nitroxide radical coupling or single electron transfer‐nitroxide radical coupling reaction using CuBr(Cu)/PMDETA as catalytic system. Fluorescence probe technique was employed to determine the critical micelle concentrations (cmc) of the obtained amphiphilic graft copolymers in aqueous media. Furthermore, PAA‐g‐PEO graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PEO side chains kept inert. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Polymers and cyclic compounds based on a side‐opening type cage silsesquioxane

Polymers having polyhedral oligomeric silsesquioxane (POSS) in the main chains are an important class of organic–inorganic hybrid materials. Despite the increasing attention to the POSS polymers, variation of the monomers is still limited. Herein, we have proposed side‐opening POSS (SO‐POSS) monomers. Platinum‐catalyzed hydrosilylation polymerization proceeded to produce polysiloxanes having SO‐POSS in the main chains. The obtained polysiloxanes showed good solubility, high thermal stability, high transparency, and tunable reflective index. In addition, cyclic compounds were obtained during the investigation of the polymerization, and were synthesized with high selectivity under the slightly diluted conditions. The obtained cyclic compounds showed high thermal stability due to the silsesquioxane backbone, and the high dispersibility as a filler in poly(methyl methacrylate) was demonstrated. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2243–2250     

Photoreversible Supramolecular Polymerisation and Hierarchical Organization of Hydrogen‐Bonded Supramolecular Co‐polymers Composed of Diarylethenes and Oligothiophenes

Diarylethene 1 equipped with two monotopic melamine hydrogen‐bonding sites and oligothiophene‐functionalized ditopic cyanurate (OTCA) were mixed in a nonpolar solvent to form AA‐BB‐type supramolecular co‐polymers (SCPs) bearing photoswitchable moieties in their main chains and extended π systems as side chains. UV/Vis, fluorescence, dynamic light scattering (DLS), TEM, and AFM studies revealed that the two functional co‐monomers formed flexible quasi‐one‐dimensional SCPs in solution that hierarchically self‐organized into helical nanofibers through H‐aggregation of the oligothiophene side chains. Upon irradiating the SCPs with UV light, a transition occurred from the H‐aggregated state to non‐aggregated monomeric oligothiophene side chains, as shown by spectroscopic studies, which indicates the formation of small oligomeric species held together only by hydrogen‐bonding interactions. TEM and AFM visualized unfolded fibrils corresponding to elongated single SCP chains formed upon removal of solvent. The helical nanofibers were regenerated upon irradiating the UVirradiated solution with visible light. These results demonstrated that the supramolecular polymerisation followed by hierarchical organization can be effectively controlled by proper supramolecular designs using diarylethenes and π‐conjugated oligomers.     

Single chain self‐assembly of well‐defined heterotelechelic polymers generated by ATRP and click chemistry revisited

Well‐defined heterotelechelic poly(styrene) carrying thymine/diaminopyridine (DAP) (M_n,SEC = 9300, PDI = 1.04) and Hamilton wedge (HW)/cyanuric acid (CA) (M_n,SEC = 8200, PDI = 1.04) bonding motifs are prepared via a combination of controlled/living radical polymerization and copper catalyzed azide/alkyne “click” chemistry and are subsequently self‐assembled as single chains to emulate—on a simple level—the self‐folding behavior of natural biomacromolecules. Hydrogen nuclear magnetic resonance (¹H NMR) in deuterated dichloromethane and dynamic light scattering analyses provides evidence for the hydrogen bonding interactions between the α‐thymine and ω‐DAP as well as α‐CA and ω‐HW chain ends of the heterotelechelic polymers leading to circular entropy driven single chain self‐assembly. This study demonstrates that the choice of NMR solvent is important for obtaining well‐resolved NMR spectra of the self‐assembled structures. In addition, steric effects on the HW can affect the efficiency of the self‐assembly process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011