Use of a “Catalytic” Cosolvent,N,N‐Dimethyl Octanamide,Allows the Flow Synthesis of Imatinib with no Solvent Switch

A general, efficient method for C−N cross‐coupling has been developed using N,N‐dimethyloctanamide as a catalytic cosolvent for biphasic continuous‐flow applications. The described method was used to generate a variety of biarylamines and was integrated into a two‐step sequence which converted phenols into biarylamines via either triflates or tosylates. Additionally, the method was applied to a three‐step synthesis of imatinib, the API of Gleevec, in good yield without the need of solvent switches.     

Continuous‐Flow Synthesis of Biaryls by Negishi Cross‐Coupling of Fluoro‐ and Trifluoromethyl‐Substituted (Hetero)arenes

A continuous‐flow method for the regioselective arylation of fluoroarenes and fluoropyridines has been developed. The telescoped procedure reported here consists of a three‐step metalation, zincation, and Negishi cross‐coupling sequence, providing efficient access to a variety of functionalized 2‐fluorobiaryl products. Precise temperature control of the metalation step, made possible by continuous‐flow technology, allowed for the efficient preparation of the arylated products in high yields and short residence times. Additionally, several examples of the regioselective arylation of benzotrifluoride derivatives are also provided.     

Asymmetric “Acetylenic” [3+2] Cycloaddition of Nitrones Catalyzed by Cationic Chiral PdII Lewis Acid

Highly enantioselective [3+2] cycloaddition of ynones and nitrones has been developed. Very bulky ligand, DTBM‐SEGPHOS, was used for an effective asymmetric induction over distal reaction centers on the linear ynone dipolarophile and for prevention of Pd^II catalyst deactivation by coordination of the nitrones. The reaction has wide scope of substrates in both ynones and nitrones.     

Flow “Fine” Synthesis: High Yielding and Selective Organic Synthesis by Flow Methods

The concept of flow “fine” synthesis, that is, high yielding and selective organic synthesis by flow methods, is described. Some examples of flow “fine” synthesis of natural products and APIs are discussed. Flow methods have several advantages over batch methods in terms of environmental compatibility, efficiency, and safety. However, synthesis by flow methods is more difficult than synthesis by batch methods. Indeed, it has been considered that synthesis by flow methods can be applicable for the production of simple gasses but that it is difficult to apply to the synthesis of complex molecules such as natural products and APIs. Therefore, organic synthesis of such complex molecules has been conducted by batch methods. On the other hand, syntheses and reactions that attain high yields and high selectivities by flow methods are increasingly reported. Flow methods are leading candidates for the next generation of manufacturing methods that can mitigate environmental concerns toward sustainable society.     

“On‐Water,” Microwave‐Assisted,Pd‐Catalyzed Synthesis of Indoles from Imines and o‐Difunctionalized Arenes

Regioselectively substituted indoles are prepared by a Pd‐catalyzed C? C/C? N bond‐forming sequence from imines and o‐dihaloarenes or o‐haloarene sulfonates. The heterogeneous reaction as a suspension in water and under microwave heating offers important advantages in comparison with the conventional reaction in an organic solvent, among them, operational simplicity, the employment of KOH solutions instead of alkoxides, and a dramatic reduction of reaction times.     

Synthesis,Structure, and Reactivity of 5‐(Aryl)dibenzothiophenium Triflates

A synthetic protocol for the preparation of 5‐(aryl)dibenzothiophenium salts starting from inexpensive dibenzothiophene S‐oxide and simple arenes is reported. The scope of the method regarding the nature of the arene is evaluated, intermediates along the reaction sequence have been trapped, and side‐reactions identified. In addition, the X‐ray structures of a complete set of these salts are reported and their reactivities studied. Specifically, chemoselective Suzuki coupling is observed at the dibenzothiophenium in the presence of iodides.     

Using “Threading Followed by Shrinking” to Synthesize Highly Stable Dialkylammonium‐Ion‐Based Rotaxanes

Herein, we report a “threading followed by shrinking” approach for the synthesis of rotaxanes by using an “oxygen‐deficient” macrocycle that contained two arylmethyl sulfone units and the dumbbell‐shaped salt bis(3,5‐dimethylbenzyl)ammonium tetrakis(3,5‐trifluoromethylphenyl)borate as the host and guest components, respectively. The extrusion of SO₂ from both of the arylmethyl sulfone units of the macrocyclic component in the corresponding [2]pseudorotaxane resulted in a [2]rotaxane that was sufficiently stable to maintain its molecular integrity in CD₃SOCD₃ at 393 K for at least 5 h.     

Fast,Efficient and Low E‐Factor One‐Pot Palladium‐Catalyzed Cross‐Coupling of (Hetero)Arenes

The homocoupling of aryl halides and the heterocoupling of aryl halides with either aryl bromides or arenes bearing an ortho‐lithiation directing group are presented. The use of a Pd catalyst, in combination with t‐BuLi, allows for the rapid and efficient formation of a wide range of polyaromatic compounds in a one pot procedure bypassing the need for the separate preformation of an organometallic coupling partner. These polyaromatic structures are obtained in high yields, in 10 min at room temperature, with minimal waste generation (E‐factors as low as 1.5) and without the need for strict inert conditions, making this process highly efficient and practical in comparison to classical methods. As illustration, several key intermediates of widely used BINOL‐derived structures are readily prepared.     

The “Green” Electrochemical Synthesis of Periodate

High‐grade periodate is relatively expensive, but is required for many sensitive applications such as the synthesis of active pharmaceutical ingredients. These high costs originate from using lead dioxide anodes in contemporary electrochemical methods and from expensive starting materials. A direct and cost‐efficient electrochemical synthesis of periodate from iodide, which is less costly and relies on a readily available starting material, is reported. The oxidation is conducted at boron‐doped diamond anodes, which are durable, metal‐free, and nontoxic. The avoidance of lead dioxide ultimately lowers the cost of purification and quality assurance. The electrolytic process was optimized by statistical methods and was scaled up in an electrolysis flow cell that enhanced the space–time yields by a cyclization protocol. An LC‐PDA analytical protocol was established enabling simple quantification of iodide, iodate, and periodate simultaneously with remarkable precision.     

Palladium‐Catalyzed Oxidative Carbonylation of N‐Allylamines for the Synthesis of β‐Lactams

β‐Lactam scaffolds are considered to be ideal building blocks for the synthesis of nitrogen‐containing compounds. A new palladium‐catalyzed oxidative carbonylation of N‐allylamines for the synthesis of α‐methylene‐β‐lactams is reported. DFT calculations suggest that the formation of β‐lactams via a four‐membered‐ring transition state is favorable.     

Divergent Synthesis of Vinyl‐, Benzyl‐, and Borylsilanes: Aryl to Alkyl 1,5‐Palladium Migration/Coupling Sequences

Organosilicon compounds have been extensively utilized both in industry and academia. Studies on the syntheses of diverse organosilanes is highly appealing. Through‐space metal/hydrogen shifts allow functionalization of C?H bonds at a remote site, which are otherwise difficult to achieve. However, until now, an aryl to alkyl 1,5‐palladium migration process seems to have not been presented. Reported herein is the remote olefination, arylation, and borylation of a methyl group on silicon to access diverse vinyl‐, benzyl‐, and borylsilanes, constituting a unique C(sp³)?H transformation based on a 1,5‐palladium migration process.     

Highly Efficient “On Water” Catalyst‐Free Nucleophilic Addition Reactions Using Difluoroenoxysilanes: Dramatic Fluorine Effects

A remarkable fluorine effect on “on water” reactions is reported. The C? F???H? O interactions between suitably fluorinated nucleophiles and the hydrogen‐bond network at the phase boundary of oil droplets enable the formation of a unique microstructure to facilitate on water catalyst‐free reactions, which are difficult to realize using nonfluorinated substrates. Accordingly, a highly efficient on water, catalyst‐free reaction of difluoroenoxysilanes with aldehydes, activated ketones, and isatylidene malononitriles was developed, thus leading to the highly efficient synthesis of a variety of α,α‐difluoro‐β‐hydroxy ketones and quaternary oxindoles.     

Direct Access to α,α‐Difluoroacylated Arenes by Palladium‐Catalyzed Carbonylation of (Hetero)Aryl Boronic Acid Derivatives

A palladium‐catalyzed carbonylative coupling of (hetero)aryl boronates or boronic acid salts with carbon monoxide and α‐bromo‐α,α‐difluoroamides and bromo‐α,α‐difluoroesters is described herein. The method is useful for the synthesis of a diverse selection of (hetero)aryl α,α‐difluoro‐β‐ketoamides and α,α‐difluoro‐β‐ketoesters, which are useful building blocks for the generation of functionalized difluoroacylated and difluoroalkyl arenes. The method could be further extended to a one‐pot protocol for the formation of difluoroacetophenones.     

Visible Light Activation of Boronic Esters Enables Efficient Photoredox C(sp2)–C(sp3) Cross‐Couplings in Flow

We report herein a new method for the photoredox activation of boronic esters. Using these reagents, an efficient and high‐throughput continuous flow process was developed to perform a dual iridium‐ and nickel‐catalyzed C(sp²)–C(sp³) coupling by circumventing solubility issues associated with potassium trifluoroborate salts. Formation of an adduct with a pyridine‐derived Lewis base was found to be essential for the photoredox activation of the boronic esters. Based on these results we were able to develop a further simplified visible light mediated C(sp²)–C(sp³) coupling method using boronic esters and cyano heteroarenes under flow conditions.     

Synthesis of Complexes with Abnormal “Protic” N‐Heterocyclic Carbenes

Neutral 4‐iodo‐N‐ethylimidazole 3 oxidatively adds to [Pt(PPh₃)₄] to give, in the presence of different tetraalkylammonium salts, complexes trans‐[ 4 ], trans‐[ 5 ], and trans‐[ 6 ] containing an anionic C4‐bound heterocycle with an unsubstituted ring‐nitrogen atom. Complex trans‐[ 4 ] reacts with the proton source NH₄I under protonation of the ring‐nitrogen atom to produce complex trans‐[ 7 ]I which bears an NH,NR‐substituted aNHC ligand. The reaction of trans‐[ 4 ] with CH₃I yields the complex trans‐[ 8 ]I which has a classical aNHC ligand with two alkylated ring‐nitrogen atoms.