A Computational and Experimental Approach Linking Disorder,High‐Pressure Behavior,and Mechanical Properties in UiO Frameworks

Whilst many metal–organic frameworks possess the chemical stability needed to be used as functional materials, they often lack the physical strength required for industrial applications. Herein, we have investigated the mechanical properties of two UiO‐topology Zr‐MOFs, the planar UiO‐67 ([Zr₆O₄(OH)₄(bpdc)₆], bpdc: 4,4′‐biphenyl dicarboxylate) and UiO‐abdc ([Zr₆O₄(OH)₄(abdc)₆], abdc: 4,4′‐azobenzene dicarboxylate) by single‐crystal nanoindentation, high‐pressure X‐ray diffraction, density functional theory calculations, and first‐principles molecular dynamics. On increasing pressure, both UiO‐67 and UiO‐abdc were found to be incompressible when filled with methanol molecules within a diamond anvil cell. Stabilization in both cases is attributed to dynamical linker disorder. The diazo‐linker of UiO‐abdc possesses local site disorder, which, in conjunction with its longer nature, also decreases the capacity of the framework to compress and stabilizes it against direct compression, compared to UiO‐67, characterized by a large elastic modulus. The use of non‐linear linkers in the synthesis of UiO‐MOFs therefore creates MOFs that have more rigid mechanical properties over a larger pressure range.     

Neon‐Bearing Ammonium Metal Formates: Formation and Behaviour under Pressure

The incorporation of noble gas atoms, in particular neon, into the pores of network structures is very challenging due to the weak interactions they experience with the network solid. Using high‐pressure single‐crystal X‐ray diffraction, we demonstrate that neon atoms enter into the extended network of ammonium metal formates, thus forming compounds Ne_x[NH₄][M(HCOO)₃]. This phenomenon modifies the compressional and structural behaviours of the ammonium metal formates under pressure. The neon atoms can be clearly localised within the centre of [M(HCOO)₃]₅ cages and the total saturation of this site is achieved after ～1.5 GPa. We find that by using argon as the pressure‐transmitting medium, the inclusion inside [NH₄][M(HCOO)₃] is inhibited due to the larger size of the argon. This study illustrates the size selectivity of [NH₄][M(HCOO)₃] compounds between neon and argon insertion under pressure, and the effect of inclusion on the high‐pressure behaviour of neon‐bearing ammonium metal formates.     

Modelling a Linker Mix‐and‐Match Approach for Controlling the Optical Excitation Gaps and Band Alignment of Zeolitic Imidazolate Frameworks

Tuning the electronic structure of metal–organic frameworks is the key to extending their functionality to the photocatalytic conversion of absorbed gases. Herein we discuss how the band edge positions in zeolitic imidazolate frameworks (ZIFs) can be tuned by mixing different imidazole‐based linkers within the same structure. We present the band alignment for a number of known and hypothetical Zn‐based ZIFs with respect to the vacuum level. Structures with a single type of linker exhibit relatively wide band gaps; however, by mixing linkers of a low‐lying conduction edge with linkers of a high‐lying valence edge, we can predict materials with ideal band positions for visible‐light water splitting and CO₂ reduction photocatalysis. By introducing copper in the tetrahedral position of the mixed‐linker ZIFs, it would be possible to increase both photo‐absorption and the electron–hole recombination times.     

Hetero‐Epitaxial Approach by Using Labile Coordination Sites to Prepare Catenated Metal–Organic Frameworks with High Surface Areas

A solid‐state approach that takes advantage of the ordered 3D arrangement of active secondary building units allows the preparation of new interlocked MOFs that grow hetero‐epitaxially on the crystal faces of a precursor phase that acts as a “topological blueprint”. The synthetic strategy is exemplified by using rigid acetylene‐based ligands to produce highly augmented Cu^II acetate‐based MOFs.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Designing,Describing and Disseminating New Materials by using the Network Topology Approach

This Concept article describes how network topology analysis is applied to different fields of solid‐state chemistry. Its usefulness is demonstrated by examples from metal–organic frameworks, group 14 allotropes and related compounds, ice polymorphs, zeolites, supramolecular (organic) solid‐state chemistry, Zintl phases, and cathode materials for Li‐ion batteries.     

X‐ray Crystallography in Open‐Framework Materials

Open‐framework materials, such as metal–organic frameworks (MOFs) and coordination polymers have been widely investigated for their gas adsorption and separation properties. However, recent studies have demonstrated that their highly crystalline structures can be used to periodically organize guest molecules and non‐structural metal compounds either within their pore voids or by anchoring to their framework architecture. Accordingly, the open framework can act as a matrix for isolating and elucidating the structures of these moieties by X‐ray diffraction. This concept has broad scope for development as an analytical tool where obtaining single crystals of a target molecule presents a significant challenge and it additionally offers potential for obtaining insights into chemically reactive species that can be stabilized within the pore network. However, the technique does have limitations and as yet a general experimental method has not been realized. Herein we focus on recent examples in which framework materials have been utilized as a scaffold for ordering molecules for analysis by diffraction methods and canvass areas for future exploration.     

Three‐Dimensional Metal–Fullerene Frameworks

Hexakis‐substituted [60]fullerene adducts with icosahedral symmetry provide an unprecedented scaffold for the spatial arrangement of twelve functional groups with high geometric precision. This unique molecular symmetry identifies such polyfunctional organic building blocks as potential highly connective linkers for coordination polymer and metal–organic framework synthesis. Hereby, the linker exhibits a higher connectivity than the metal ions and with the main connectivity based on the ligand, this can create a new type of inversely cross‐linked framework. Two hexakis adducts bearing either twelve glycolic acid or 3‐hydroxypropionic acid side chains attached to its malonate units were incorporated as organic connectivity centers in the first fullerene‐containing three‐dimensional frameworks by coordination with Zn²⁺.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Computational Methods for MOF/Polymer Membranes

Metal–organic framework (MOF)/polymer mixed matrix membranes (MMMs) have received significant interest in the last decade. MOFs are incorporated into polymers to make MMMs that exhibit improved gas permeability and selectivity compared with pure polymer membranes. The fundamental challenge in this area is to choose the appropriate MOF/polymer combinations for a gas separation of interest. Even if a single polymer is considered, there are thousands of MOFs that could potentially be used as fillers in MMMs. As a result, there has been a large demand for computational studies that can accurately predict the gas separation performance of MOF/polymer MMMs prior to experiments. We have developed computational approaches to assess gas separation potentials of MOF/polymer MMMs and used them to identify the most promising MOF/polymer pairs. In this Personal Account, we aim to provide a critical overview of current computational methods for modeling MOF/polymer MMMs. We give our perspective on the background, successes, and failures that led to developments in this area and discuss the opportunities and challenges of using computational methods for MOF/polymer MMMs.     

Molecular Sieving of C2‐C3 Alkene from Alkyne with Tuned Threshold Pressure in Robust Layered Metal–Organic Frameworks

C₂‐C₃ alkyne/alkene separation is of great importance; however, designing materials for an efficient molecular sieving of alkenes from alkynes remains challenging. Now, two hydrolytically stable layered MOFs, [Cu(dps)₂(GeF₆)] (GeFSIX‐dps‐Cu, dps=4,4′‐dipyridylsulfide) and [Zn(dps)₂(GeF₆)] (GeFSIX‐dps‐Zn), can achieve almost complete exclusion of both C₃H₆ and C₂H₄ from their alkyne analogues. GeFSIX‐dps‐Cu displays a notable advanced threshold pressure for alkynes adsorption and thus substantial uptakes at lower pressures, providing record C₃H₄/C₃H₆ uptake ratios and capacity‐enhanced C₂H₂/C₂H₄ sieving for a wide composition range. Metal substitution (Zn to Cu) affords fine tuning of linker rotation and layer stacking, creating slightly expanded pore aperture and interlayer space coupled with multiple hydrogen‐bonding sites, allowing easier entrance of alkyne while excluding alkene. Breakthrough experiments confirmed tunable sieving by these MOFs for C₃H₄/C₃H₆ and C₂H₂/C₂H₄ mixtures.     

Unprecedented Sulfone‐Functionalized Metal–Organic Frameworks and Gas‐Sorption Properties

Gas storage : A new, sulfone‐functionalized dicarboxylate‐based ligand (see figure) is capable of directing the formation of novel metal–organic frameworks with unprecedented organic and inorganic secondary building units. A high CO₂ uptake with remarkable selectivity over CH₄, N₂, and H₂ was observed at near‐ambient temperature.

     

Metal–Covalent Organic Frameworks (MCOFs): A Bridge Between Metal–Organic Frameworks and Covalent Organic Frameworks

Many sophisticated chemical and physical properties of porous materials strongly rely on the presence of the metal ions within the structures. Whereas homogeneous distribution of metals is conveniently realized in metal–organic frameworks (MOFs), the limited stability potentially restricts their practical implementation. From that perspective, the development of metal–covalent organic frameworks (MCOFs) may address these shortcomings by incorporating active metal species atop highly stable COF backbones. This Minireview highlights examples of MCOFs that tackle important issues from their design, synthesis, characterization to cutting‐edge applications.     

Microporous Metal–Organic Frameworks for Gas Separation

Microporous metal–organic frameworks (MOFs) are comparatively new porous materials. Because the pores within such MOFs can be readily tuned through the interplay of both metal‐containing clusters and organic linkers to induce their size‐selective sieving effects, while the pore surfaces can be straightforwardly functionalized to enforce their different interactions with gas molecules, MOF materials are very promising for gas separation. Furthermore, the high porosities of such materials can enable microporous MOFs with optimized gas separation selectivity and capacity to be targeted. This Focus Review highlights recent significant advances in microporous MOFs for gas separation.     

Metal‐Ion Metathesis and Properties of Triarylboron‐Functionalized Metal–Organic Frameworks

An anionic metal–organic framework, H₃[(Mn₄Cl)₃ L ₈]?30 H₂O?2.5 DMF?5 Diox ( UPC‐15 ), was successfully prepared by the reaction of MnCl₂ with tris(p‐carboxylic acid)tridurylborane (H₃ L ) under solvothermal conditions. UPC‐15 with wide‐open pores (～18.8 Å) is constructed by packing of octahedral and cuboctahedral cages, and exhibits high gas‐sorption capabilities. Notably, UPC‐15 shows selective adsorption of cationic dyes due to the anion framework. Moreover, the catalytic and magnetic properties were investigated, and UPC‐15 can highly catalyze the cyanosilylation of aromatic aldehydes. UPC‐15 exhibits the exchange of metal ions from Mn to Cu in a single‐crystal‐to‐single‐crystal manner to generate UPC‐16 , which could not be obtained by the direct solvothermal reaction of CuCl₂ and H₃ L. UPC‐16 exhibits similar properties for gas sorption, dye separation, and catalytic activity. However, the magnetic behaviors for UPC‐15 and UPC‐16 are distinct due to the metal‐specific properties. Below 47 K, UPC‐15 exhibits a ferromagnetic coupling but UPC‐16 shows a dominant antiferromagnetic behavior.     

Effect of Functionalized Groups on Gas‐Adsorption Properties: Syntheses of Functionalized Microporous Metal–Organic Frameworks and Their High Gas‐Storage Capacity

The microporous metal–organic framework (MMOF) Zn₄O(L1)₂ ? 9 DMF ? 9 H₂O ( 1‐H ) and its functionalized derivatives Zn₄O(L1‐CH₃)₂ ? 9 DMF ? 9 H₂O ( 2‐CH₃ ) and Zn₄O(L1‐Cl)₂ ? 9 DMF ? 9 H₂O ( 3‐Cl ) have been synthesized and characterized (H₃L1=4‐[N,N‐bis(4‐methylbenzoic acid)amino]benzoic acid, H₃L1‐CH₃=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐methylbenzoic acid, H₃L1‐Cl=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐chlorobenzoic acid). Single‐crystal X‐ray diffraction analyses confirmed that the two functionalized MMOFs are isostructural to their parent MMOF, and are twofold interpenetrated three‐dimensional (3D) microporous frameworks. All of the samples possess enduring porosity with Langmuir surface areas over 1950 cm² g^?1. Their pore volumes and surface areas decrease in the order 1‐H > 2‐CH₃ > 3‐Cl . Gas‐adsorption studies show that the H₂ uptakes of these samples are among the highest of the MMOFs (2.37 wt % for 3‐Cl at 77 K and 1 bar), although their structures are interpenetrating. Furthermore, this work reveals that the adsorbate–adsorbent interaction plays a more important role in the gas‐adsorption properties of these samples at low pressure, whereas the effects of the pore volumes and surface areas dominate the gas‐adsorption properties at high pressure.     

Continuous‐Flow Microwave Synthesis of Metal–Organic Frameworks: A Highly Efficient Method for Large‐Scale Production

Metal–organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal–organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO‐66, MIL‐53(Al), and HKUST‐1 were obtained with remarkable mass, space–time yields, and often using stoichiometric amounts of reactants. In the case of UiO‐66 and MIL‐53(Al), we attained unprecedented space–time yields far greater than those reported previously. All of the syntheses were successfully extended to multi‐gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal–organic frameworks.