Key factors for designing single-atom metal-nitrogen-carbon catalysts for electrochemical CO2 reduction

The electrochemical CO₂ reduction (CO₂RR) is a sustainable approach to mitigate the increased CO₂ emissions and simultaneously produce value-added chemicals and fuels. Metal-nitrogen-carbon (M-N-C) based single-atom catalysts (SACs) have emerged as promising electrocatalysts for CO₂RR with high activity, selectivity, and stability. To design efficient SACs for CO₂RR, the key influence factors need to be understood. Here, we summarize recent achievements on M-N-C SACs for CO₂RR and highlight the significance of the key constituting factors, metal sites, the coordination environment, and the substrates, for achieving high CO₂RR performance. The perspective views and guidelines are provided for the future direction of developing M-N-C SACs as CO₂RR catalysts.     

Unexpected high selectivity for acetate formation from CO2 reduction with copper based 2D hybrid catalysts at ultralow potentials

Copper-based catalysts are efficient for CO₂ reduction affording commodity chemicals. However, Cu(i) active species are easily reduced to Cu(0) during the CO₂RR, leading to a rapid decay of catalytic performance. Herein, we report a hybrid-catalyst that firmly anchors 2D-Cu metallic dots on F-doped Cu_xO nanoplates (Cu_xOF), synthesized by electrochemical-transformation under the same conditions as the targeted CO₂RR. The as-prepared Cu/Cu_xOF hybrid showed unusual catalytic activity towards the CO₂RR for CH₃COO⁻ generation, with a high FE of 27% at extremely low potentials. The combined experimental and theoretical results show that nanoscale hybridization engenders an effective s,p-d coupling in Cu/Cu_xOF, raising the d-band center of Cu and thus enhancing electroactivity and selectivity for the acetate formation. This work highlights the use of electronic interactions to bias a hybrid catalyst towards a particular pathway, which is critical for tuning the activity and selectivity of copper-based catalysts for the CO₂RR.

A two-dimensional (2D) copper hybrid catalyst (Cu/Cu_xOF) composed of metallic Cu well dispersed on 2D F-doped Cu_xO nanoplates (Cu_xOF) is reported, which shows high catalytic activity toward the CO₂RR for acetate generation.     

Positive Valent Metal Sites in Electrochemical CO2 Reduction Reaction

The discovery of high-performance catalysts for the electrochemical CO₂ reduction reaction ( CO₂RR) has faced an enormous challenge for years. The lack of cognition about the surface active structures or centers of catalysts in complex conditions limits the development of advanced catalysts for CO₂RR. Recently, the positive valent metal sites (PVMS) are demonstrated as a kind of potential active sites, which can facilitate carbon dioxide (CO₂) activation and conversation but are always unstable under reduction potentials. Many advanced technologies in theory and experiment have been utilized to understand and develop excellent catalysts with PVMS for CO₂RR. Here, we present an introduction of some typical catalysts with PVMS in CO₂RR and give some understanding of the activity and stability for these related catalysts.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Seeing is believing: In-situ visualising dynamic evolution in CO2 electrolysis

CO₂ reduction reaction (CO₂RR), as a promising carbon neutral strategy, enables the production of valuable chemicals and fuels from greenhouse gas. Despite tremendous efforts in developing CO₂RR catalysts to improve activity, selectivity and stability, mechanisms behind the catalytic performance, however, are still under-explored owing largely to limited characterisation capability. In this review, advances in in-situ imaging technologies for studying CO₂RR have been overviewed. These technologies emerge as powerful tools to track the transformation of catalyst materials over real-time and space, under CO₂RR operating conditions. The review discusses emerging opportunities in the direction of combined in-situ characterisation techniques and machine learning to aid further discovery of structure–function relationships in CO₂RR.     

Recent advances in carbon-based materials for electrochemical CO2 reduction reaction

The increase of atmospheric CO₂ concentration has caused many environmental issues. Electrochemical CO₂ reduction reaction（CO₂RR） has been considered as a promising strategy to mitigate these challenges. The electrocatalysts with a low overpotential, high Faradaic efficiency, and excellent selectivity are of great significance for the CO₂RR. Carbon-based materials including metal-free carbon catalysts and metal-based carbon catalysts have shown great p...     

The influence of the modification of carbonaceous materials on their catalytic properties in SCR-NH3. A short review

Carbonaceous catalysts are promising materials for the low-temperature (< 523 K) process of NO reduction with ammonia. Based on literature and own experience of the authors, this review focuses on the possibilities to enhance their catalytic performance. It may be increased by the introduction of oxygen or nitrogen functionalities. So obtained materials may be used in SCR-NH₃ either as catalysts or supports for transition metals oxides/hydroxides. Oxygen functionalities increase activity only to a small extent, but are necessary to prepare an efficient MeO_x/AC catalyst. Nitrogen surface species lead to a considerable increase in DeNO_x activity, as well as stability towards their oxidation to CO₂. As the most efficient active components, oxides of V, Mn, Fe and Cu were found. H₂O leads to the decrease of activity but for some catalysts additionally to the increase in selectivity. The understanding of SO₂ influence needs more experimental data. There still are several open questions concerning more detailed mechanistic studies, and especially the role of nitrogen functionalities, H₂O and SO₂.     

Organic functionalization of metal catalysts: Enhanced activity towards electroreduction of carbon dioxide

Electrochemical reduction of carbon dioxide has been attracting extensive interest due to its fundamental significance both in environmental protection and in energy storage. In this review, recent progress in the manipulation of the catalytic activity and selectivity of various transition metals towards CO₂ reduction reaction (CO₂RR) is summarized within the context of deliberate surface functionalization by select organic ligands. This is primarily manifested in three effects, interfacial charge transfer, suppression of hydrogen evolution, and stabilization of key reaction intermediates. The review is concluded with a perspective of the challenges and promises in the structural engineering of metal catalysts for enhanced CO₂RR performance.     

Molecular Evidence for Metallic Cobalt Boosting CO2 Electroreduction on Pyridinic Nitrogen

Nitrogen‐doped carbon materials (N‐C_mat) are emerging as low‐cost metal‐free electrocatalysts for the electrochemical CO₂ reduction reaction (CO₂RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO₂RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well‐defined N‐C_mat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO₂RR performance on pyridinic N can be significantly boosted by electronic modulation from in‐situ‐generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28 mA cm^?2 at ?0.9 V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO₂RR on N‐C_mat, which may guide the exploration of cost‐effective electrocatalysts for efficient CO₂ reduction.     

The atomic-level regulation of single-atom site catalysts for the electrochemical CO2 reduction reaction

The electrochemical CO₂ reduction reaction (CO₂RR) is viewed as a promising way to remove the greenhouse gas CO₂ from the atmosphere and convert it into useful industrial products such as methane, methanol, formate, ethanol, and so forth. Single-atom site catalysts (SACs) featuring maximum theoretical atom utilization and a unique electronic structure and coordination environment have emerged as promising candidates for use in the CO₂RR. The electronic properties and atomic structures of the central metal sites in SACs will be changed significantly once the types or coordination environments of the central metal sites are altered, which appears to provide new routes for engineering SACs for CO₂ electrocatalysis. Therefore, it is of great importance to discuss the structural regulation of SACs at the atomic level and their influence on CO₂RR activity and selectivity. Despite substantial efforts being made to fabricate various SACs, the principles of regulating the intrinsic electrocatalytic performances of the single-atom sites still needs to be sufficiently emphasized. In this perspective article, we present the latest progress relating to the synthesis and catalytic performance of SACs for the electrochemical CO₂RR. We summarize the atomic-level regulation of SACs for the electrochemical CO₂RR from five aspects: the regulation of the central metal atoms, the coordination environments, the interface of single metal complex sites, multi-atom active sites, and other ingenious strategies to improve the performance of SACs. We highlight synthesis strategies and structural design approaches for SACs with unique geometric structures and discuss how the structure affects the catalytic properties.

Electrochemical CO₂ reduction reaction (CO₂RR) is a promising way to remove CO₂ and convert it into useful industrial products. Single-atom site catalysts provide opportunities to regulate the active sites of CO₂RR catalysts at the atomic level.     

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction

Closing the anthropogenic carbon cycle by converting CO₂ into reusable chemicals is an attractive solution to mitigate rising concentrations of CO₂ in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO₂ reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at −0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H₂ evolution reaction (HER) to compete with the CO₂ reduction reaction (CO₂RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO₂ reduction for various sizes of Ni metal catalysts.     

Recent progress in advanced core-shell metal-based catalysts for electrochemical carbon dioxide reduction

Electrochemical carbon dioxide reduction（CO₂RR） plays an important role in solving the problem of high concentration of CO₂in the atmosphere and realizing carbon cycle. Core-shell structure has many unique features including tandem catalysis, lattice strain effect, defect engineering, which exhibit great potential in electrocatalysis. In this review, we focus on the advanced core-shell metal-based catalysts（CMCs） for electrochemical CO₂RR. The recent progress of ...     

Identification of Catalytic Sites for Oxygen Reduction in Metal/Nitrogen‐Doped Carbons with Encapsulated Metal Nanoparticles

The development of metal‐N‐C materials as efficient non‐precious metal (NPM) catalysts for catalysing the oxygen reduction reaction (ORR) as alternatives to platinum is important for the practical use of proton exchange membrane fuel cells (PEMFCs). However, metal‐N‐C materials have high structural heterogeneity. As a result of their high‐temperature synthesis they often consist of metal‐N_x sites and graphene‐encapsulated metal nanoparticles. Thus it is hard to identify the active structure of metal‐N‐C catalysts. Herein, we report a low‐temperature NH₄Cl‐treatment to etch out graphene‐encapsulated nanoparticles from metal‐N‐C catalysts without destruction of co‐existing atomically dispersed metal‐N_x sites. Catalytic activity is much enhanced by this selective removal of metallic nanoparticles. Accordingly, we can confirm the spectator role of graphene‐encapsulated nanoparticles and the pivotal role of metal‐N_x sites in the metal‐N‐C materials for ORR in the acidic medium.     

Promoting electrochemical conversion of CO2 to formate with rich oxygen vacancies in nanoporous tin oxides

Defect engineering, especially oxygen vacancies (O-vacancies) introduction into metal oxide materials has been proved to be an effective strategy to manipulate their surface electron exchange processes. However, quantitative investigation of O-vacancies on CO₂ electroreduction still remains rather ambiguous. Herein, a series of nanoporous tin oxide (SnO_x) materials have been prepared by thermal treatment at various temperatures and reaction conditions. The annealing temperature dependent O-vacancies property of the SnOx was revealed and attributed to the balance tunning of the desorption of oxygen species and the continous oxidation of SnO_x. The as-prepared nanoporous SnO_x with 300 °C treatment was found to be highest O-vacant material and showed an impressive CO₂RR activity and selectivity towards the conversion of CO₂ into formic acid (up to 88.6%), and superior HCOOH incomplete current density to other samples. The ideal performance of the O-vacancies rich SnO_x-300 material can be ascribed to the high delocalized electron density inducing much enhanced adsorption of CO₂ with O binding and benefiting the subsequent reduction with high selectively forming of formic acid.     

Tuning product selectivity in CO2 hydrogenation over metal-based catalysts

Conversion of CO₂ into chemicals is a promising strategy for CO₂ utilization, but its intricate transformation pathways and insufficient product selectivity still pose challenges. Exploiting new catalysts for tuning product selectivity in CO₂ hydrogenation is important to improve the viability of this technology, where reverse water-gas shift (RWGS) and methanation as competitive reactions play key roles in controlling product selectivity in CO₂ hydrogenation. So far, a series of metal-based catalysts with adjustable strong metal–support interactions, metal surface structure, and local environment of active sites have been developed, significantly tuning the product selectivity in CO₂ hydrogenation. Herein, we describe the recent advances in the fundamental understanding of the two reactions in CO₂ hydrogenation, in terms of emerging new catalysts which regulate the catalytic structure and switch reaction pathways, where the strong metal–support interactions, metal surface structure, and local environment of the active sites are particularly discussed. They are expected to enable efficient catalyst design for minimizing the deep hydrogenation and controlling the reaction towards the RWGS reaction. Finally, the potential utilization of these strategies for improving the performance of industrial catalysts is examined.

A series of metal oxide, phosphate, alloy, and carbide-based catalysts for selective CO₂ hydrogenation are summarized, showing their abilities to switch CO₂ methanation to RWGS.     

Electrochemical Reduction of Carbon Dioxide to Ethanol: An Approach to Transforming Greenhouse Gas to Fuel Source

Converting carbon dioxide (CO₂) into high-value fuels or chemicals is considered as a promising way to utilize CO₂ and alleviate the excessive greenhouse gas emission. Among multiple catalysis approaches, electrochemical reduction of CO₂ to ethanol has an important prospect due to the high energy density and widely applications of ethanol. In recent years, many electrocatalysts for CO₂ reduce reaction (CO₂RR) have shown promising catalytic activity for ethanol production. In this review, we will introduce the recent progress in this field. The basic principles and electrochemical performances of CO₂RR are reviewed at first. Then, several categories of active electrocatalysts for CO₂RR to ethanol are summarized, including the discussion of reaction mechanism and catalytic sites. Finally, several possible strategies are proposed, providing guidance for future design and preparation of high-performance catalysts.     

Electrochemical CO2 Activation and Valorization on Metallic Copper and Carbon-Embedded N-Coordinated Single Metal MNC Catalysts

The electrochemical reductive valorization of CO₂, referred to as the CO2RR, is an emerging approach for the conversion of CO₂-containing feeds into valuable carbonaceous fuels and chemicals, with potential contributions to carbon capture and use (CCU) for reducing greenhouse gas emissions. Copper surfaces and graphene-embedded, N-coordinated single metal atom (MNC) catalysts exhibit distinctive reactivity, attracting attention as efficient electrocatalysts for CO2RR. This review offers a comparative analysis of CO2RR on copper surfaces and MNC catalysts, highlighting their unique characteristics in terms of CO₂ activation, C₁/C₂₍₊₎ product formation, and the competing hydrogen evolution pathway. The assessment underscores the significance of understanding structure–activity relationships to optimize catalyst design for efficient and selective CO2RR. Examining detailed reaction mechanisms and structure-selectivity patterns, the analysis explores recent insights into changes in the chemical catalyst states, atomic motif rearrangements, and fractal agglomeration, providing essential kinetic information from advanced in/ex situ microscopy/spectroscopy techniques. At the end, this review addresses future challenges and solutions related to today's disconnect between our current molecular understanding of structure–activity-selectivity relations in CO2RR and the relevant factors controlling the performance of CO₂ electrolyzers over longer times, with larger electrode sizes, and at higher current densities.     

Ruthenium Single Atomic Sites Surrounding the Support Pit with Exceptional Photocatalytic Activity

Single-metal atomic sites and vacancies can accelerate the transfer of photogenerated electrons and enhance photocatalytic performance in photocatalysis. In this study, a series of nickel hydroxide nanoboards (Ni(OH)_x NBs) with different loadings of single-atomic Ru sites (w-SA-Ru/Ni(OH)_x) were synthesized via a photoreduction strategy. In such catalysts, single-atomic Ru sites are anchored to the vacancies surrounding the pits. Notably, the SA-Ru/Ni(OH)_x with 0.60 wt % Ru loading (0.60-SA-Ru/Ni(OH)_x) exhibits the highest catalytic performance (27.6 mmol g⁻¹ h⁻¹) during the photocatalytic reduction of CO₂ (CO₂RR). Either superfluous (0.64 wt %, 18.9 mmol g⁻¹ h⁻¹; 3.35 wt %, 9.4 mmol⁻¹ h⁻¹) or scarce (0.06 wt %, 15.8 mmol g⁻¹ h⁻¹; 0.29 wt %, 21.95 mmol g⁻¹ h⁻¹; 0.58 wt %, 23.4 mmol g⁻¹ h⁻¹) of Ru sites have negative effect on its catalytic properties. Density functional theory (DFT) calculations combined with experimental results revealed that CO₂ can be adsorbed in the pits; single-atomic Ru sites can help with the conversion of as-adsorbed CO₂ and lower the energy of *COOH formation accelerating the reaction; the excessive single-atomic Ru sites occupy vacancies that retard the completion of CO₂RR.     

Design and Preparation of Electrocatalysts by Electrodeposition for CO2 Reduction

With the increasing emission of carbon dioxide (CO₂), the conversion and utilization of CO₂ have become a topic of increasing concern. Electrochemical CO₂ reduction reaction (CO₂RR) is an attractive and sustainable approach for solving energy and environmental problems. Design of efficient catalysts is crucial for achieving highly efficient CO₂RR. Different methods to prepare catalysts have been reported and used. Among them, electrodeposition is one of the common approaches, which has some obvious advantages, such as requiring simple equipment, environmentally benign. Especially, it can direct deposit catalysts on different substrates to prepare electrodes for CO₂RR. In this review, we discuss recent advances in design and preparation of the catalysts by electrodeposition and their applications in CO₂RR. Furthermore, the perspective of this promising area is also discussed.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.