COMPUTER SIMULATION OF A SINGLE POLYMER CHAIN IN DIFFERENT SOLVENTS

In the present paper, the behavior of a single polymer chain under various solvent conditions was modeled by self-avoiding walks (SAW) with nearest neighbors attraction Δε on a simple cubic lattice. Determination of the θ-condition wasbased on the numerical results of the mean square radius of gyration and end-to-end distance. It was found that at the θtemperatue Δε/kT equals -0.27. The exponents a in the Mark-Houwink equation with different interaction parameters areconsistent with the results of experiments: under θ-condition, a = 0.5, and for a good solvent α= 0.74-0.84, respectively.     

The schmidt reaction on 3a,4,5,6-tetrahydrosuccinimido[3,4-b]-acenaphthen-10-one and its alkylated derivatives

The rearrangement of 3a,4,5,6-tetrahydrosuccinimido[3,4-b]acenaphthen-10-one and two methylated derivatives using Schmidt conditions is described. The ratio of the major product, 2,3,8,9-tetrahydro-3-oxo-1H-benz[de]isoquinoline-1,9a-(7H)dicarboximide, to the minor product, 2,3,6,7-tetrahydro-3-oxo-4H-benz[ij]-isoquinoline-4,4a-(5H)dicarboximide, under different acidic conditions is given. The ratios of analogous products from the methylated derivatives are similar under similar conditions.     

Shear-induced β-form crystallization in isotactic polypropylene

Extruded, injection-molded, unoriented crystallized specimens and capillary rheometer efflux strands of commercially stabilized polypropylene without nucleating agents were examined by optical microscopy and x-ray diffraction to determine the conditions for β-form crystallization as a function of the distance from the surface and of the shear rate at commercial processing conditions. Results demonstrate that at all “cooling conditions” ΔT = T_m ? T_b (defined as the melt temperature T_m minus the bath temperature T_b) effects of strain flow initiate nucleation of β-form crystals. The shear rate is demonstrated to be important for β-form crystallization. A critical average threshold value for the shear rate of approximately 3 × 10² sec^?1 has to be exceeded. The β modification is mostly connected with type-III spherulites and partly to row structures, and it is observed at processing conditions in oriented structures only.     

Über die Eigenschaften des Xp-Teils von AnBXp-Kernresonanzspektren

The subspectral breakdown of the X-part in A_nBX_p-spectra is derived and the general properties of the subspectra are discussed. The nature of the asymmetry of X_p-spectra for n > 1 is explained and conditions for its disappearance are given. The degeneration of the X_p-part into deceptively simple spectra is described and degeneration conditions are derived. The determination of relative signs of coupling constants is discussed.     

On the polymerization reactivity of fluorinated vinyl monomers

The polymerization reactivities of α,β,β‐trifluorovinyl compounds (CF₂=CF—R) and α‐trifluoromethylvinyl compounds (CH₂=C(CF₃)—R) are discussed since these monomers have scarcely been investigated and hardly yielded corresponding homopolymers, although tetrafluoroethylene and chlorotrifluoroethylene have been studied under radical polymerization conditions. In the case of α,β,β‐trifluorostyrene, a homopolymer is obtained in low yields by anionic polymerization and it is concluded that the reaction takes place without any side reactions once the reaction has started, since simple addition polymerization is observed and the molecular weight distribution is very narrow. Anionic polymerization of hexafluorobuta‐1,3‐diene is successfully achieved by the addition reaction of living end to the 2‐carbon of hexafluorobuta‐1,3‐diene followed by isomerization to produce excellently high thermostable polymers. ω‐Trifluorovinyloxyfluoroalkyl alcohol produces a polyether via a polyaddition reaction under anionic conditions. The homopolymers of α‐trifluoromethylacrylates are quantitatively obtained under anionic polymerization conditions. α‐Trifluoromethylstyrene derivatives are likely to polymerize under radical conditions, but are not well‐studied. The radical polyaddition reaction of perfluoroisopropenyl esters in 1,4‐dioxane, diethyl ether or 1,2‐dimethoxyethane yields the polymers possessing the solvent moiety in the polymer main chain, respectively. It is clearly demonstrated that each fluorinated vinyl monomer discussed in this article demands its own reaction conditions. Therefore, more experimental data on the polymerization of these individual monomers is needed, including research on developing the reactions discovered in the organofluorine chemistry field to the preparation of polymers.     

Stereoselective Synthesis of (Z)‐ and (E)‐Allyl Aryl Sulfides and Selenides from Baylis?Hillman Acetates under Neutral Conditions Using β‐Cyclodextrin in Water

The first example of the stereoselective synthesis of (Z)‐ and (E)‐allyl aryl sulfides and selenides from Baylis? Hillman acetates under neutral conditions in H₂O by supramolecular catalysis involving β‐cyclodextrin is reported. β‐Cyclodextrin can be recovered and reused. The reaction is very efficient in providing allyl aryl sulfides and selenides in good‐to‐excellent yields with clean reaction profiles under mild reaction conditions.     

New derivation and a k-particle generalization of SCF-type theories

A hierarchy of necessary conditions that an exact density matrix of a pure state or an ensemble has to satisfy is derived, namely the hermiticity of certain operators F^(k). For k = 1 this reduces to the well-known Hartree-Fock condition. It is then shown that the kth set of conditions is equivalent to stationarity of the energy with respect to unitary k-particle transformations. k-Particle generalizations of Hartree-Fock theory are then discussed both in the spirit of k-particle pseudoeigenvalue equations and in the framework of a Newton–Raphson-type constructive scheme.     

Synthesis of Glycosyl Azides by the Addition of Phenylselenenyl Azide to Glycals

Abstract

The addition of phenylselenenyl azide to glycals is carried out under conditions that give 2-deoxy-2-phenylselenoglycosyl azides. This regiochemistry is opposite to that obtained under free-radical conditions, which are known to produce 2-azido-2-deoxyselenoglycosides. The addition reaction is carried out with phenylselenenyl chloride and sodium azide in dimethylformamide, and is stereoselective for trans addition. Tri-O-benzyl-d-glucal and di-O-benzyl-l-rhamnal each gave two addition products, in which the phenylselenyl and azido groups were either trans diaxial or trans diequatorial. Tri-O-benzyl-d-galactal gave only the trans diaxial addition product.     

Determination of the energy distribution in unimolecular reactions under soft collision conditions

The effective energy distribution of activated molecules at the time of reaction under soft collision conditions ?′(E, ω) is pressure dependent and therefore difficult to recover from unimolecular decomposition data obtained at different pressures. We show in this work that the part of this function restricted to the condition that the collision frequency ω has to be equal to the microscopic rate constant k(E) at the energy given ?″[E,ω = k(E)] is a reasonable approximation to the input energy distribution ?(E) for quite soft collisions. This function is not pressure dependent and then recoverable at least in principle and as a matter of fact is not conceptually far from the function that the already reported deconvolution methods based in physical approximations attempt to recover. The deconvolution methods have been checked under soft collision conditions. We have found that the input energy distribution is recovered with reasonable accuracy for energies transferred by collision 〈ΔE〉 above 5 kcal mol^?1, conditions common in polyatomic systems.     

Metal-Free Directed Site-Selective Csp3-H Borylation of Saturated Cyclic Amines

The borylation of Csp³−H bonds is a challenging transformation that is typically restricted to transition metal catalysis. Herein, we report the site-selective metal-free Csp³−H borylation of saturated cyclic amines. It is possible to selectively borylate piperidine derivatives at the α or β positions according to the reaction conditions. The mechanism was supported by NMR spectroscopy, calorimetry experiments and density functional theory (DFT) computations. It suggests that the piperidine is dehydrogenated by complexation with BBr₃ to produce an enamine intermediate, which is in turn borylated at either the α or β position according to the reaction conditions.     

C-2 Epimerization of N-Acetylglucosamine in an Oligosaccharide Derived From Heparan Sulfate

Abstract

The isolation of a heparan sulfate derived tetrasaccharide containing N-acetylmannosamine is described. The N-acetylmannosamine residue at the reducing terminus of heparin lyase derived tetrasaccharide is formed by base catalyzed C-2 epimerization of N-acetylglucosamine. This C-2 epimerization takes place under very mild conditions suggesting that this residue may be formed in small amounts under physiologic conditions.     

Reactive Sites in Isophorone Isomers: H/D‐Exchange Studies and Quantum‐Chemical Calculations

Base‐catalyzed H/D‐exchange for α‐ and β‐isophorone ( 1 and 2 , resp.) was monitored by NMR spectroscopy to identify the number and nature of reactive sites. Results show that α‐isophorone ( 1 ) undergoes H/D exchange at up to four different sites depending on reaction conditions. β‐Isophorone ( 2 ), on the other hand, exhibits activity at two sites, predominantly at the α‐position, under comparable conditions. Quantum‐chemical calculations indicate that the thermodynamically more‐stable anions formed upon proton abstraction from isophorone are not favored kinetically in all cases. Thermodynamically unfavorable H/D‐exchange at the α‐position in 1 , which is observed experimentally, is explained via intermediate formation of γ‐isophorone ( 3 ) with subsequent conjugation to the α‐isomer. Differences observed in the reactivities of the two isomers and differences in reactivity of 1 under various conditions in reactions involving proton abstraction as an initial step may be partly explained on the basis of these results.     

An evaluation of the Noyori system “in reverse”: Thermodynamic and kinetic parameters of secondary alcohol transfer dehydrogenation catalyzed by [(η-1-Pr-4-Me-C6H4)Ru(HN-CR′R″-CR′R″NTs)], R′ = H, Me; Ph, R″ = H, Me

The 16 electron ruthenium complexes [(η⁶-1-isopropyl-4-methyl-benzene)(X-N)Ru(II)], where X-N is 2-amido-1-ethoxide (2), 1-N-p-tosyl-1,2-diamido-ethane (3), 1-N-p-tosyl-1,2-diamido-benzene (7), 1-N-(p-tosyl)-1,2-diamido-1,1,2,2-tetramethyl-ethane (8) and 1-N-(p-tosyl)-1,2-diamido-meso-1,2-diphenyl-ethane (9) have been evaluated as catalysts for the transfer dehydrogenation of secondary alcohols to ketones in acetone and/or cyclohexanone solvent. Complexes 2 and 3 cannot be isolated and decompose under these conditions. In contrast complexes 7, 8 and 9 are supported by ligands designed to resist β-hydride elimination and can with the exclusion of oxygen be held in solution for weeks. Complex 7 is not active as a catalyst. Complexes 8 and 9 are highly air-sensitive and active as catalysts for transfer (de)hydrogenations under oxidizing and reducing conditions, respectively. There is no coordinative inhibition of the catalysts by the ketone solvent under oxidizing conditions, but both catalysts show a correlation between the reaction rates and the ΔG values of the reactions with reactions leading to α, β-unsaturated ketones proceeding faster. For all alcohol/ketone substrate pairs where the ketone is not α, β-unsaturated, the hydrogenation reactions under reducing conditions (iso-propanol solvent) are at least one order of magnitude faster than the corresponding dehydrogenation reaction under oxidizing conditions (acetone solvent).     

Polysaccharides and sterols from green algae Caulerpa lentillifera and C. sertularioides

Sterols and polysaccharides of green alga Caulerpa lentillifera grown under laboratory conditions and in mariculture and polysaccharides of green alga C. sertularioides grown under natural conditions were studied. The sterol fraction consisted of C₂₇-C₂₉ steroidal alcohols with Δ⁵-unsaturation in the steroid core regardless of the growth conditions. The dominant (79.9%) steroid component of the sterol fraction was clionasterol. The water-soluble fraction of C. lentillifera grown under laboratory conditions was a mixture of 1,4-α- and 1,3-β-D-glucans and protein. The same fraction isolated from C. lentillifera grown in mariculture contained only protein. The water-soluble fraction of C. sertularioides grown under natural conditions contained 1,3;1,6-β-D-galactan sulfated at C2. The principal components of the base-soluble polysaccharide fractions from all algae samples were 1,4-α-D-glucans. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 5-8, January-February, 2009.     

Chemical and Chromatographic Behavior of Pseudohypericin and Isopseudohypericin,and the Occurrence of Isopseudohypericin in Saint John’s Wort (<Emphasis Type="Italic">Hypericum perforatum</Emphasis>) Extracts

Summary. Isopseudohypericin is formed from pseudohypericin in an alkaline, alcohol/water environment. The conditions for this conversion are specified, showing that these two compounds are in equilibrium at pH values of 5–10; pseudohypericin is stable below pH 5, and isopseudohypericin is stable above pH 10. It is also shown that the HPLC behavior of isopseudohypericin is dependent on the pH of the mobile phase: pH determines both the retention time and the UV-Vis spectrum characteristics of the corresponding peak analyzed using a diode array detector. Finally, different extraction conditions yield extracts containing different proportions of isopseudohypericin: it is suggested that this isopseudohypericin may be an artefact of extraction conditions and/or it may correspond to the compound cyclopseudohypericin, discussed by other experts but never formally characterized.     

Extension de la méthode du «logarithme limite» [1] pour la détermination de la composition et de la constante de stabilité des complexes

A study of the conditions of applicability to weak complexes of the relation log x = v log V + log (β_v,cC^c) = f(logV), where V and C are variable and constant total concentrations of the constituants of the complexe, shows that for conditions other than C ? V, another function φ(log V) accounts better for the formation equilibrium of the complexe. From f(log V) and φ (log V) a relation t(log V) is derived whose simple analysis permits the determination of the composition and the stability constant of weak complexes. Applications are given to 1:1, 1:2, 2:2 composition.     

Chemical ionization mass spectrometry of doxylamine and related compounds

The chemical ionization mass spectrometric (CIMS) analysis of doxylamine, N,N-dimethyl-2-[1-phenyl-1-(2-pyridinyl)ethoxy]ethanamine, and related compounds, using both ammonia and methane as reagent gases, is discussed. The two reagent gases did not produce the same major fragment ion for doxylamine. Mechanisms for the fragmentation of doxylamine under either ammonia or methane CIMS conditions are proposed. The mechanisms explain the observation of an m/z 182 fragment ion for doxylamine analyzed under methane CIMS conditions and an m/z 184 product ion detected under ammonia CIMS conditions.     

Diffusion-controlled reaction. VI. Radiation graft polymerization of styrene to polyethylene

The radiation graft polymerization of styrene to polyethylene was studied under diffusion-controlled conditions of radiation intensity I, monomer concentration M₁, and polymer sample thickness L. The results of the present study together with previous work under diffusion-free conditions verify our theoretical model for the diffusion-controlled reaction. The grafting rate is inverse first order in L for diffusion-controlled reaction and independent of L for diffusion-free reaction. The order of dependence of grafting rate on radiation intensity for diffusion-controlled reaction is one-half that for diffusion-free reaction. Diffusion control leads to a decrease in the order of dependence of grafting rate on monomer concentration. The decrease is greater than theoretically predicted; possible reasons for this effect are described.     

N-Representability conditions generated by a one-particle grassmann factor of an antisymmetric function

N-representability conditions for a two-particle density operator implied by positive-semidefiniteness of the projection operator P^N+1(?¹ Λ Ψ^N) are derived and discussed. The operator P^N+1(?¹ Λ Ψ^N) projects onto an (N + 1)-particle antisymmetric function ?¹ Λ Ψ^N, the Grassmann product of a one-particle factor ?¹ and an N-particle factor Ψ^N. The polar subcone ??²_N(g, q) to the set of N-representable two-particle density operators ??²_N which corresponds to these conditions is found. It is shown that its extreme rays belong to two orbits for the action of the unitary group of transformations in one-particle Hilbert space. The facial structure of the convex set ??²_N exposed by elements of ??²_N(g, q) is analyzed. An example of the operator that changes the structure of its bottom eigenspace when the number of fermions N surpasses a certain value is noted. A new approach to the diagonal conditions for N-representability is found. It consists of the decomposition of the N-particle antisymmetric identity operator onto the mutually orthogonal projection operators.     

The stereochemistry of fragmentation products formed in the lead tetraacetate and related oxidations of alcohols. Part. I. β-fragmentation of cis-and trans-4-t-Butylcyclohexanemethanol

The stereochemistry of β-fragmentation products formed in the oxidation of cis-and trans-4-t-butylcyclohexaanemethanol with lead tetraacetate and with lead tetraacetate-metal chloride combinations, under various reaction conditions, has been investigated, and the results compared with those obtained, under similar conditions, in the oxidative decarboxylation of cis-and trans-4-t-butylcyclohexanecarboxylic acid with the same reagents. It was found that all four substrates afford, under comparable conditions, identical cis-trans proportions of the respective fragmentation products, and that, therefore, so far as steric course is concerned, both the initial homolytic and subsequent heterolytic processes involved in the lead tetraacetate fragmentation reaction are independent of the nature and configuration of the starting material.