New routes for copolymerization of carbon monoxide with styrene or vinyl chloride and photodegradation of these copolymers in solutions

New routes for copolymerization of carbon monoxide with styrene or vinyl chloride were found by emulsion polymerization (nonionic or ionic emulsifier). These procedures yielded copolymers containing carbonyl groups even at high conversion. These carbonyl-containing polyketones were photoirradiated in solvent. In carbon monoxide—styrene copolymer of high molecular weight, the viscosity change produced by photoirradiation was especially remarkable, while in carbon monoxide—vinyl chloride copolymer no pronounced change in viscosity was observed, even at high contents of carbonyl group.     

Alternating copolymerizations of styrene derivatives and carbon monoxide in the presence of a palladium (II) catalyst

A series of styrene derivatives were synthesized from aromatic substances by Friedel-Crafts acylation, reduction, and dehydration. Alternating copolymers of styrene derivatives and carbon monoxide were prepared in the presence of a palladium(II) catalyst. The characterization of the polyketones produced was performed by use of ¹H-NMR, IR, WXRD, and EA methods. The thermal degradation of the regular alternating copolymer of carbon monoxide and styrene (STCO) has been studied by thermal gravimetry (TG). The TG spectra of solid samples were recorded both in nitrogen and in air. The degradation reaction order and activation energy were determined. The photodegradation of STCO was investigated. In addition, the block copolymerization of STCO with methyl methacrylate under UV irradiations was also studied. It is found that the tertiary amine can promote this photopolymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1283–1291, 1997     

Photodehydrochlorination of carbon monoxide–vinyl chloride copolymer

In order to examine effect of the carbonyl group in carbon monoxide–vinyl chloride copolymer, poly(CO–VC), photoirradiation with a high-pressure mercury lamp on the copolymer was carried out. Poly(CO–VC) had a rate of dehydrochlorination three times that of PVC, and the reaction involved a decrease in chlorine content. Also there was a marked change in the ultraviolet spectra of the photoirradiated films. However, no pronounced change of molecular weight was observed, but a change in R_f in TLC was observed clearly. These facts confirmed that photoirradiation of poly(CO–VC) produced a structural change by dehydrochlorination without serious decrease of molecular weight. In addition, photodehydrochlorination of the copolymer or PVC film was followed kinetically, and after ozonolysis of the dehydrochlorinated polymers, the number-average molecular weights were measured. From the results of degree of dehydrochlorination and molecular weight, the number average of conjugated double bonds or carbonyl groups was estimated. A mechanism for dehydrochlorination process by photo-irradiation is suggested.     

Characterization of styrene–acrylonitrile copolymer by pyrolysis gas chromatography

Samples of styrene–acrylonitrile (SAN) copolymer of different compositions, molecular weights, block copolymers, and a blend of styrene and acrylonitrile homopolymers were prepared and characterized by the method of pyrolysis gas chromatography. On decomposition of SAN copolymer samples at 645°C, eleven components were identified, the most important of them being styrene, acrylonitrile, and propionitrile. By examination of the pyrolyzate composition during pyrolysis of the SAN copolymer of different compositions, it was established that the propionitrile yield was definitely decreased when the acrylonitrile concentration in copolymer was about 60 mole-%. Further, from the propionitrile yield, we could distinguish random SAN copolymer from the styrene-acrylonitrile homopolymer blend, and on the basis of propionitrile yield some information on the molecular structure of the copolymer could be obtained. The styrene yield depends linearly on the copolymer composition. This permits determination of copolymer composition on the basis of the styrene yield. Furthermore, the effects of decomposition temperature and of molecular weight on the yields of styrene and acrylonitrile were examined.     

Polyoximes based on the alternating carbon monoxide copolymers

A new efficient method for the synthesis of polyoximes was developed based on the oximation of the alternating carbon monoxide copolymer with ethylene or styrene in the polar aprotic solvent.     

Alternative copolymerization of aziridines and carbon monoxide by γ-ray irradiation

The copolymerization of carbon monoxide and aziridines such as ethylenimine and propylenimine was carried out by γ-ray irradiation. Aziridines and carbon monoxide were allowed to copolymerize under γ-ray irradiation from a Co⁶⁰ source and gave a crystalline solid copolymer. The yield of the copolymer increased with reaction temperature. The composition of copolymers obtained did not depend on the feed ratio of monomers and was found to be almost equimolar. The copolymer of ethylenimine and carbon monoxide melted at about 322–335°C. with decomposition and has an infrared spectrum identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. The hydrolyzed product of the ethylenimine–carbon monoxide copolymer was confirmed to be β-alanine by paper chromatography. These results lead to the conclusion that the copolymerization of aziridines and carbon monoxide took place alternatively by γ-ray irradiation, and produced crystalline poly-β-alanines.     

Structure and properties of a styrene–butadiene–styrene block copolymer

Electron-microscopic texture and physical properties of a styrene–butadiene–styrene (SBS) block copolymer obtained by casting from toluene, carbon tetrachloride, ethyl acetate, and methyl ethyl ketone are discussed. Two peaks are observed in the mechanical loss (tan delta;) curve at ?70 and 100°C which are attributed to segmental motion of polybutadiene and polystyrene, respectively. The polybutadiene peak heights are in the order of solubility in the solvent used; the polystyrene peak heights are in converse order. In addition to these peaks, a third peak is observed at 10°C for specimens cast from ethyl acetate or methyl ethyl ketone. A transition corresponding to this peak is also noticed in thermal analysis. It is proposed that aggregation of styrene blocks is relatively incomplete in specimens cast from solution in poor solvents.     

Photoinitiating capabilities of vinyl polyperoxides and metamorphosis of block-into-block copolymer

This article describes the first comprehensive study on the use of a vinyl polyperoxide, namely poly(styrene peroxide) (PSP), an equimolar alternating copolymer of oxygen and styrene, as a photoinitiator for free radical polymerization of vinyl monomers like styrene. The molecular weight, yield, structure and thermal stability of polystyrene (PS) thus obtained are compared with PS made using a simple peroxide like di-t-butyl peroxide. Interestingly, the PS prepared using PSP contained PSP segments attached to its backbone preferably at the chain ends. This PSP–PS–PSP was further used as a thermal macroinitiator for the preparation of another block copolymer PS-b-PMMA by reacting PSP–PS–PSP with methyl methacrylate (MMA). The mechanism of block copolymerization has been discussed. © 1996 John Wiley & Sons, Inc.     

γ-Ray-induced terpolymerization of carbon monoxide,aziridines, and cyclic ethers

The terpolymerization of carbon monoxide, aziridines, and cyclic ethers was carried out by γ-irradiation. A partially crystalline solid copolymer was obtained. The infrared spectrum of the copolymer obtained indicated characteristic peaks due to the secondary amide and ester groups. The results of elementry analysis, infrared spectra, and x-ray diffraction of the copolymer showed that terpolymerization of carbon monoxide, aziridine, and cyclic ether took place by γ-irradiation. 2-Vinyl-1,3-dioxolane was polymerized in the system of carbon monoxide and ethylenimine to give a solid polymer. The infrared spectrum showed characteristics of the secondary amide and dioxolane ring, while no absorption due to carbonyl group of ester was observed. The infrared spectra and results of elementary analysis confirmed that the terpolymerization of carbon monoxide–ethylenimine–2-vinyl-1,3-dioxolane occurred.     

Palladium‐catalyzed phosphonation of SEBS block copolymer

Phosphonic acid‐bearing styrene–ethylene/butylene–styrene (SEBS) block copolymer was synthesized by bromination and subsequent palladium‐catalyzed phosphonation of SEBS. The phosphonated block copolymer was characterized by spectroscopic, thermal, and conductivity measurements. The new polymer shows good ion‐exchange capacity of ～0.7 meq/g and proton conductivity of around 2–4 mS/cm (at room temperature and 100% relative humidity) which is in good agreement with literature value of other phosphonated materials. This value was obtained despite a relatively low degree of phosphonation, demonstrating the ability of the phase separated nature of block copolymers to promote proton conductivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5431–5441, 2008     

Oxygen permeation in SBS-g-DMAEMA copolymer membrane prepared by UV photografting without degassing

The grafting of dimethyl amino ethyl methacrylate (DMAEMA) onto styrene–butadiene–styrene triblock copolymer membrane (SBS) was induced by UV-radiation without degassing to obtain SBS-g-DMAEMA copolymer membrane. The graft copolymer membrane was characterized by electron spectroscopy for chemical analysis (ESCA). The density and the decomposition temperature of the SBS-g-DMAEMA copolymer membrane were measured. The effects of DMAEMA grafting content and operating temperature on membrane gas permeability were investigated. It was found that the density of SBS-g-DMAEMA copolymer membrane increased with increasing DMAEMA content, whereas the decomposition temperature decreased. The changes of properties of SBS-g-DMAEMA copolymer membrane reduced the gas permeability and diffusivity of oxygen and nitrogen through the membrane, but increased the gas solubility of oxygen through the membrane and the gas selectivity between oxygen and nitrogen. When the operating temperature of gas permeation was increased, the permeability, solubility and diffusivity of oxygen and nitrogen increased but the selectivity decreased.     

Alternating copolymerization of polar vinyl monomers in the presence of zinc chloride. III. NMR study of methyl methacrylate–styrene copolymer

The copolymer composition curve of the methyl methacrylate–styrene copolymer obtained by the copolymerization in the presence of ZnCl₂ has more alternating tendency than that of ordinary methyl methacrylate–styrene copolymer obtained by radical copolymerization. The fine structure of the copolymer was examined by NMR, and the mechanism of the propagation step of the copolymerization in the presence of ZnCl₂, which was proposed in the first report of this series, was verified.     

Mechanism and kinetics of ordering in diblock copolymer thin films on chemically nanopatterned substrates

Lamellae forming diblock copolymer domains can be directed to assemble without defects and in registration with chemically nanopatterned substrates. Initially, thin films of the lamellar poly(styrene-b-methyl methacrylate) block copolymer form hexagonally close-packed styrene domains when annealed on chemical nanopatterned striped surfaces. These styrene domains then coalesce to form linear styrene domains that are not fully registered with the underlying chemical surface pattern. Defects coarsen, until defect-free directed assembly is obtained, by breaking linear styrene domains and reforming new structures until registered lamellae have been formed. At all stages in the process, two factors play an important role in the observed degree of registration of the block copolymer domains as a function of annealing time: the interfacial energy between the blocks of the copolymer and the chemically nanopatterned substrate and the commensurability of the bulk repeat period of the block copolymer and the substrate pattern period. Insight into the time-dependent three-dimensional behavior of the block copolymer structures is gained from single chain in mean field simulations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3444–3459, 2005     

Influence of addition of olefins on the alternating copolymerization of carbon monoxide and ethylenimine by azobisisobutyronitrile or by γ-ray irradiation

The alternating copolymerization of carbon monoxide and ethylenimine to give poly-β-alanine could be initiated by γ-irradiation but hardly by α,α'-azobisisobutyronitrile (AIBN). It was found that in the case of the addition of olefin, this system could be copolymerized even by AIBN and that, in the γ-ray copolymerization of carbon monoxide and ethylenimine, the addition of olefin brought about an increase in the copolymer yield. No difference was observed between the nature of copolymers obtained by AIBN and those obtained by γ-irradiation, except in the system carbon monoxide–ethylenimine–ethylene. An increase in the amount of reacted olefin gave rise to an increase in copolymer yield. The melting points of the copolymers were in the range 295–335°C. The infrared spectra, x-ray diffraction diagrams, and NMR spectra of the copolymers were almost identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. Paper chromatographic analysis of the hydrolysis product of the copolymer showed the existence of β-alanine, ethylamine, and δ-aminovaleric acid homolog in the products. From these results, it was concluded that terpolymerization of carbon monoxide, ethylenimine, and olefin took place in the presence of AIBN or γ-irradiation which gave a crystalline solid copolymer containing the units of nylon 3 and nylon 5. A mechanism of this copolymerization was proposed on the basis of these results.     

Enantioselective isotactic alternating copolymerization of styrene and 4-methylstyrene with carbon monoxide catalyzed by a cationic bioxazoline pd(II) complex

The cationic bioxazoline Pd(II) complex 2 catalyzes the alternating copolymerization of carbon monoxide with styrene and 4-methylstyrene, respectively, to yield a highly isotactic optically active polymer at room temperature and low carbon monoxide pressure (1–4 atm).     

Magic-angle 13C-NMR of cured and degraded acrylic copolymer/melamine formaldehyde coatings

Magic-angle carbon-13 NMR has been used to probe the structure and dynamics of acrylic copolymer melamine formaldehyde crosslinked coatings. Changes in chemical composition that occur in conventional accelerated weathering tests were found to be dominated by hydrolysis of acrylic-melamine crosslinks and subsequent formation of melamine-melamine crosslinks. Evidence for photo-oxidation was also observed. These results are in substantial agreement with infrared measurements also made on these coatings. Gated high-power decoupling experiments were used to determine relative mobilities of the different carbon resonances as a function of acrylic copolymer composition and as a function of degradation. It was found that motion of the side-chain carbons on the acrylic copolymer was not sensitive either to the chemical composition of the coating or to the extent of degradation. Mobilities of the main-chain carbons of the acrylic copolymer decrease with increasing glass transition temperature of the acrylic copolymer. For acrylic copolymers containing styrene, it is found that the main-chain carbon mobilities decrease with weathering. The melamine triazine ring becomes very rigid after degradation consistent with the formation of short melamine-melamine crosslinks.     

Silica nanoparticle dispersions in homopolymer versus block copolymer

Silica nanoparticles (17 ± 4 nm in diameter) were modified by grafting polystyrene chains to the surfaces using atom transfer radical polymerization (ATRP). The molecular weight of the grafted chains ranged from 8 to 48 kDa. These modified nanoparticles were mixed in solution with poly(styrene) homopolymer (18–120 kDa) and symmetric poly(styrene‐b‐butadiene) (PS‐PB) diblock copolymer (34–465 kDa) and the states of dispersion in the dried composites were characterized by transmission electron microscopy (TEM). In the so‐called wet brush limit, when the graft molecular weight equals or exceeds the matrix value, the silica particles form a uniform random dispersion in poly(styrene). Increasing the homopolymer matrix, molecular weight above the graft value results in particle clustering and macroscopic‐phase separation. Mixtures of the lamellar forming block copolymer and nanoparticles exhibit a very different trend, with particle clustering at the lower PS‐PB molecular weights and dispersion at the highest value. This latter finding is rationalized on the basis of packing constraints associated with lamellar order and the effective particle dimensions, and the degree of solvation at ordering, both of which favor higher molecular weight block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2284–2299, 2007     

Synthesis of “block order” networks based on styrene-ethylene-butylene ABA triblock copolymer

Styrene-ethylene-butylene ABA triblock copolymer was modified via a novel post-polymerization reaction system, employing available styrene units and a bifunctional chloromethylated agent. The reaction was carried out in solution using a system based on carbon tetrachloride-cyclohexane mixtures and TiCl₄ catalysis. Using u.v. spectroscopy, it is demonstrated that the styrene units of the copolymer are reactive under the applied conditions. A series of products having various degrees of crosslinking was studied in order to characterize their swelling behaviour within a range of organic solvents. Data concerning the kinetics of the reaction, the porosity and the morphology of the final networks were also obtained.     

Morphology and mechanical properties of binary triblock copolymer blends

The influence of the morphology on the mechanical properties of binary styrene–butadiene (SB) triblock copolymer blends of a thermoplastic block copolymer and a thermoplastic elastomer (TPE) with different molecular architectures was studied with bulk samples prepared from toluene. Both block copolymers contained SB random copolymer middle blocks, that is, the block sequence S–SB–S. The two miscible triblock copolymers were combined to create a TPE with increased tensile strength without a change in their elasticity. The changes in the equilibrium morphology of the miscible triblock copolymer blends as a function of the TPE content (lamellae, bicontinuous morphology, hexagonal cylinders, and worms) resulted in a novel morphology–property correlation: (1) the strain at break and Young's modulus of blends with about 20 wt % TPE were larger than those of the pure thermoplastic triblock copolymer; (2) at the transition from bicontinuous structures to hexagonal structures (～35 wt % TPE), a change in the mechanical properties from thermoplastic to elastomeric was observed; and (3) in the full range of wormlike and hexagonal morphology (60–100 wt % TPE), elastomeric properties were observed, the strength greatly increasing and high‐strength elastomers resulting. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 429–438, 2005     

Ligand‐Dependent Diastereoselectivity in the Palladium‐Catalyzed Copolymerization of Styrene with Carbon Monoxide

[(LL′)Pd(H₂O)](OTf)₂ complexes, in which LL′ is a chelate ligand containing the chiral 4‐benzyl‐4,5‐dihydrooxazole moiety and either pyridin‐2‐yl or 2‐(diphenylphosphino)phenyl substituents, catalyze the copolymerization of styrene with carbon monoxide with an isotactic or prevailingly syndiotactic microstructure, respectively. The chiroptical properties of the copolymers and model studies for carbon monoxide and olefin insertion on related Pd complexes suggest that the reason for the different stereochemistry of the copolymers is a site‐selective coordination of the olefin in the intermediates containing the PN ligand; a lower regioselectivity in the coordination and a different coordination site lead to the different diastereoselectivity for the copolymer formation by the complex containing the NN′‐ligand.