Germane decomposition: Kinetic and thermochemical data

Rate constants for the two stages of germane dissociation (GeH₄ → GeH₂ + H₂(I) and GeH₂ → Ge + H₂(II) have been derived from the studies of the chemiluminescence kinetics during germane dissociation in the presence of nitrous oxide behind shock waves at 1060–1300 K and the full density equal to ～10^?5 mol/cm³. Analysis in terms of the RRKM model gave the following expressions for the rate constants of these reactions in the high and low pressure limits: k _{1, ∞} = 2.0 × 10¹⁴exp(?208.0/RT) s^?1; k _{1, 0} = 1.7 × 10¹⁸(1000/T)^3.85exp(?208.0/RT) cm³/(mol s); and k _{2, 0} = 2.8 × 10¹⁵(1000/T)^1.32exp(?135.0/RT) cm³/(mol s). The results, in combination with the available enthalpies of formation of radical GeH₂, show that the back reaction for stage (I) has an energy barrier of about 66 kJ/mol.     

Kinetics and mechanism of atmospheric reactions of partially fluorinated alcohols

Gas-phase reactions typical of the Earth’s atmosphere have been studied for a number of partially fluorinated alcohols (PFAs). The rate constants of the reactions of CF₃CH₂OH, CH₂FCH₂OH, and CHF₂CH₂OH with fluorine atoms have been determined by the relative measurement method. The rate constant for CF₃CH₂OH has been measured in the temperature range 258–358 K (k = (3.4 ± 2.0) × 10¹³exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(1.5 ± 1.3) kJ/mol). The rate constants for CH₂FCH₂OH and CHF₂CH₂OH have been determined at room temperature to be (8.3 ± 2.9) × 10¹³ (T = 295 K) and (6.4 ± 0.6) × 10¹³ (T = 296 K) cm³ mol^?1 s^?1, respectively. The rate constants of the reactions between dioxygen and primary radicals resulting from PFA + F reactions have been determined by the relative measurement method. The reaction between O₂ and the radicals of the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH) have been investigated in the temperature range 258–358 K to obtain k = (3.8 ± 2.0) × 10⁸exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(10.2 ± 1.5) kJ/mol. For the reaction between O₂ and the radicals of the general formula C₂H₄FO (? HFCH₂O, CH₂F?HOH, and CH₂FCH₂?) at T = 258–358 K, k = (1.3 ± 0.6) × 10¹¹exp(?E/RT) cm³ mol^?1 s^?1, where E = ?(5.3 ± 1.4) kJ/mol. The rate constant of the reaction between O₂ and the radicals with the general formula C₂H₃F₂O (?F₂CH₂O, CHF₂?HOH, and CHF₂CH₂?) at T = 300 K is k = 1.32 × 10¹¹ cm³ mol^?1 s^?1. For the reaction between NO and the primary radicals with the general formula C₂H₂F₃O (CF₃CH₂? and CF₃?HOH), which result from the reaction CF₃CH₂OH + F, the rate constant at 298 K is k = 9.7 × 10⁹ cm³ mol^?1 s^?1. The experiments were carried out in a flow reactor, and the reaction mixture was analyzed mass-spectrometrically. A mechanism based on the results of our studies and on the literature data has been suggested for the atmospheric degradation of PFAs.     

Volume and enthalpy relaxation response after combined temperature history in polycarbonate

Summary Volume and enthalpy relaxation in polycarbonate subjected to double temperature jumps in the T_g region has been analysed. It concerns both initial T_down-jump from equilibrium above T_g to consolidation temperature below T_g and fina1 T_up-jump to relaxation temperature, also below T_g. The measured H and V data after T_up-jump were compared with respect to aging time calculating (dH/dV) ratio denoted as aging bulk modulus, K_a. According this new methodology H and V relaxation response after T_up-jump demonstrates differences in relaxation responses.     

A consistent model for the thermal decomposition of NCN3 and the singlet– triplet relaxation of NCN

The thermal decomposition of cyanogen azide (NCN₃) and the subsequent collision‐induced intersystem crossing (CIISC) process of cyanonitrene (NCN) have been investigated by monitoring excited electronic state ¹NCN and ground state ³NCN radicals. NCN was generated by the pyrolysis of NCN₃ behind shock waves and by the photolysis of NCN₃ at room temperature. Falloff rate constants of the thermal unimolecular decomposition of NCN₃ in argon have been extracted from ¹NCN concentration–time profiles in the temperature range 617 K <T< 927 K and at two different total densities: k(ρ ≈ 3 × 10^?6 mol/cm³)/s^?1=4.9 × 10⁹ × exp (?71±14 kJ mol^?1/RT) (± 30%); k(ρ ≈ 6 × 10^?6 mol/cm³)/s^?1=7.5 × 10⁹ × exp (‐71±14 kJ mol^?1/RT) (± 30%). In addition, high‐temperature ¹NCN absorption cross sections have been determined in the temperature range 618 K <T< 1231 K and can be expressed by σ /(cm²/mol)= 1.0 × 10⁸ ?6.3 × 10⁴ K^?1 × T (± 50%). Rate constants for the CIISC process have been measured by monitoring ³NCN in the temperature range 701 K <T< 1256 K resulting in k_CIISC (ρ ≈ 1.8 ×10^?6 mol/cm³)/ s^?1=2.6 × 10⁶× exp (‐36±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 3.5×10^?6 mol/cm³)/ s^?1 = 2.0 × 10⁶ × exp (?31±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 7.0×10^?6 mol/cm³)/ s^?1=1.4 × 10⁶ × exp (?25±10 kJ mol^?1/RT) (± 20%). These values are in good agreement with CIISC rate constants extracted from corresponding ¹NCN measurements. The observed nonlinear pressure dependences reveal a pressure saturation effect of the CIISC process. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 30–40, 2013     

Dissociation rate measurements in SO2 + Ar mixtures behind incident shock waves

Dissociation rates of SO₂ in SO₂ + Ar mixtures at 6%, 11%, 15% and 20% of SO₂ were measured behind incident shock waves over a temperature range 4000–6000 K at initial pressures 1.0 to 2.5 Torr. The recorded laser schlieren signals exhibited two exponentials, the faster one due to vibrational relaxation and the slower one due to dissociation. The initial dissociation rate was calculated from the value of the density gradient at the point of intersection of the two exponentials. A least-squares analysis of the experimental data yielded the following empirical relations: k_SO2Ar = 3.34 × 10¹⁵ exp(?107.6 kcal mole^?1/RT) cm³/mole s, k_SO2SO2 = 5.02 × 10¹⁴ exp(?66.6 kcal mole^?1 kcal mole^?1/RT) cm³/mole s.     

Pyrolysis of vinylacetylene between 300 and 450°C

Vinylacetylene was pyrolyzed at 300–450°C in a packed and an unpacked static reactor with a pinhole bleed to a quadrupole mass spectrometer. The reactant and C₈H₈ products were monitored continuously during a reaction by mass spectrometry. In some runs, the products were also analyzed by gas chromatography after the run. In these runs CH₄, C₂H₆, C₃H₆, and C₂H₄ were also detected. The reaction for vinylacetylene removal and C₈H₈ formation is homogeneous, second order in reactant, and independent of the presence of a large excess of N₂ or He. However, C₈H₈ formation is about half-suppressed by the addition of the free-radical scavengers NO or O₂. The rate coefficient for total vinylacetylene removal is 1.7 × 10⁶ exp(?79 ± 13 kJ/mol RT) L/mol · s. The major reaction for C₄H₄ removal is polymerization. In addition four C₈H₈ isomers, carbon, and small hydrocarbons are formed. The three major C₈H₈ isomers are styrene, cyclooctatetraene (COT), and 1,5? dihydropentalene (DHP). The C₈H₈ compounds are formed by both molecular and free-radical processes in a second-order process with an overall k ? 3 × 10⁸ exp(?122 kJ/mol RT) L/mol · s (average of packed and unpacked cell results). The molecular process occurs with an overall k = 8.5 × 10⁷ exp (?118 kJ/mol RT) L/mol · s. The COT, DHP, and an unidentified isomer (d), are formed exclusively in molecular processes with respective rate coefficients of 4.4 × 10⁴ exp(?77 kJ/mol RT), 1.7 × 10⁵ exp(?89 kJ/mol RT), and 3.1 × 10⁹ exp(? 148 kJ/mol RT) L/mol · s. The styrene is formed both by a direct free-radical process and by isomerization of COT.     

Variational RRKM theory calculation of thermal rate constant for carbon—hydrogen bond fission reaction of nitro benzene

The present work provides quantitative results for the rate of unimolecular carbon-hydrogen bond fission reaction of benzene and nitro benzene at elevated temperatures up to 2000 K. The potential energy surface for each C-H (in the ortho, meta, and para sites) bond fission reaction of nitro benzene was investigated by ab initio calculations. The geometry and vibrational frequencies of the species involved in this process were optimized at the MP2 level of theory, using the cc-pvdz basis set. Since C-H bond fission channel is barrier less reaction, we have used variational RRKM theory to predict rate constants. By means of calculated rate constant at the different temperatures, the activation energy and exponential factor were determined. The Arrhenius expression for C-H bond fission reaction of nitro benzene on the ortho, meta and para sites are k(T) = 2.1 × 10¹⁷exp(?56575.98/T), k(T) = 2.1 × 10¹⁷exp(?57587.45/T), and k(T) = 3.3 × 10¹⁶exp(?57594.79/T) respectively. The Arrhenius expression for C-H bond fission reaction of benzene is k(T) = 2 × 10¹⁸exp(?59343.48.18/T). The effect of NO₂ group, location of hydrogen atoms on the substituted benzene ring, reaction degeneracy, benzene ring resonance and tunneling effect on the rate expression have been discussed.     

High‐temperature dissociation of ethyl radicals and ethyl iodide

The decomposition of ethyl iodide and subsequent dissociation of ethyl radicals have been investigated behind incident shock waves in a diaphragmless shock tube by laser‐schlieren (LS) densitometry (1150–1870 K, 55 ± 2 Torr and 123 ± 3 Torr). The LS density‐gradient profiles were simulated assuming that the initial dissociation of C₂H₅I proceeded by 87% C–I fission and 13% HI elimination. Excellent agreement was found between the simulations and experimental profiles. Rate coefficients for the C–I scission reaction were obtained and show strong falloff. Gorin model RRKM (Rice, Ramsperger, Kassel, and Marcus) calculations are in excellent agreement with the experimental data with E₀ = 55.0 kcal/mol, which is in very good agreement with recent thermochemical measurements and evaluations. However, E₀ is approximately 2.7 kcal/mol higher than previous estimates. First‐order rate coefficients for dissociation of C₂H₅I were determined to be k_55Torr = 8.65 × 10⁶⁸ T^?16.65 exp(?37,890/T) s^?1, k_123Torr = 3.01 × 10⁶⁹ T^?16.68 exp(?38,430/T) s^?1, k_∞ = 2.52 × 10¹⁹ T^?1.01 exp(?28,775/T) s^?1. Rates of dissociation for ethyl radicals were also obtained, and these are in very good agreement with theoretical predictions (Miller J. A. and Klippenstein S. J. Phys Chem Chem Phys 2004, 6, 1192–1202). The simulations show that at low temperatures ethyl radicals are consumed through recombination reactions as well as dissociation, whereas at high temperatures, dissociation dominates. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 433–443, 2012     

Theoretical studies on the kinetics and mechanism of the reaction of atomic hydrogen with carbon dioxide

The potential energy surface for the reaction of hydrogen atom with carbon dioxide is explored by using various quantum chemical methods including W1BD, CBS-QB3, G4, G3B3, CCSD(T), QCISD(T), CCSD, M06-2X, and BB1K.Transition state theory and a modified strong collision/RRKM model are employed to calculate the thermal rate coefficients for the reaction. The results of calculation show that the overall rate constant for the reaction H + CO₂ are pressure-independent over the temperature range of 300 to 3500 K. By using the energies at the W1BD level, the non-Arrhenius expression k = 9.8T ^2.9exp(?74.8 kJ/mol/RT) L mol^?1 s^?1 was found for the reaction.     

Reactions of CFBr studied by laser-induced fluorescence

Laser-induced fluorescence has been used to study reactions of CFBr radicals in a discharge-flow system. Arrhenius expressions of (1.9 ± 0.6) ξ 10^?12 exp(?762± 92/T) and (1.4 ± 0.3) ξ 10^?12 exp(?533 ± 62/T) cm³ molecule ^?1s^?1 for their reactions with Cl₂ and Br₂ respectively. Upper limits were obtained for the rate of reaction of CFBr with O₂ and F₂CCFBr.     

Structural collapse of plant materials during freeze-drying

Structural collapse of plant materials, which affects quality of foods, was studied. Fresh and osmotically dehydrated plant materials were freeze-dried at several chamber pressures, to achieve initial sample temperatures that were below (?55?C), near (?45?C), or above (?28?C) their glass transition temperature (T _g=?45?C). Freeze-drying at ?55?C resulted in products retaining their original volume. When the initial sample temperature was increased aboveT _g, the resulting freeze-dried samples collapsed. When the initial sample temperature was increased above the temperature of ice melting (T′_m), the samples collapsed further.     

Theoretical study on the degradation mechanism of methamidophos and chloramine phosphorus with OH radicals

Theoretical investigation on the gas‐phase degradation reaction mechanism of methamidophos (MAP) and chloramine phosphorus (CHP) with OH radicals is performed. The equilibrium geometries and the harmonic vibration frequencies of the stationary points are obtained at M06‐2x/6‐31+G(d,p) level, and the higher‐level energetic information is further refined at M06‐2x/6–311++G(3df,2p) level. The rate constants for the 14 reaction channels are calculated by the improved canonical variational transition state theory with small‐curvature tunneling correction over the temperature range 200–2000 K. The three‐parameter expressions of k₁(T) = 1.53 × 10^?19T^2.74exp(?1005.12/T), k₂(T) = 1.36 × 10^?20T^3.02exp(?1259.56/T) are given. The total rate constants of all reaction channels of MAP with OH radicals are in good agreement with the available experimental data. Our results indicate that the H‐abstraction reactions on methyl are the major channels for the reaction of MAP and CHP with OH radicals. © 2015 Wiley Periodicals, Inc.     

Correlations of the thermodynamic quantities with the frequency shifts of a lattice mode close to the I–II transition in NH4Br

We correlate here the specific heat C_p with the frequency shifts (1/V) (?V/?T)_p and the thermal expansivity α_p with the (1/ν) (?V/?P)_T close to the I–II transition in NH₄Br. This correlation is performed for the Raman mode of ν_s (140 cm^?1) using the molar volume data for NH₄Br. It is shown here that spectroscopic modifications of the Pippard relations are applied satisfactorily to the I–II phase transition by using a lattice mode of NH₄Br.     

Ketone photolysis in the presence of oxygen: A useful source of OH for flash photolysis kinetics experiments

Previous studies have shown a significant OH yield from the reaction of RCO radicals (generated from the photolysis of corresponding ketone) with oxygen below total pressures of 200 Torr. The potential of these reactions as a source of OH radicals for flash photolytic kinetic studies is investigated. The viability of the method was tested by measuring rate coefficients for the reaction of OH with ethanol using both acetone/O₂ mixtures and t‐butyl hydroperoxide photolysis. The results (with statistical errors at the 2σ level) are in excellent agreement with each other (k_EtOH(acetone) = (5.87 ± 0.34) × 10^?18 T² exp((515 ± 21)K/T) cm³ molecule^?1 s^?1 and k_EtOH (t‐butyl hydroperoxide) = (5.27 ± 0.34) × 10^?18 T² exp((557 ± 20)K/T) cm³ molecule^?1 s^?1) and with the IUPAC recommendation. The reaction of OH with methyl ethyl ketone (2‐butanone) has also been investigated using a similar technique. The results show a strong non‐Arrhenius temperature dependence, k = (3.84 ± 0.12) × 10^?24× T⁴ × exp((1038 ± 11)/t). The merits of the ketone/oxygen OH source are contrasted with other established precursors. A major advantage of the technique is the ability to cleanly generate OD without the potential for isotopic scrambling prior to photolysis. © 2008 Wiley Periodicals, Inc. 40: 504–514, 2008     

Effects of POSS nanoparticles on glass transition temperatures of ultrathin poly(t‐butyl acrylate) films and bulk blends

As a model system, thin films of trisilanolphenyl‐POSS (TPP) and two different number average molar mass (5 and 23 kg mol^?1) poly(t‐butyl acrylate) (PtBA) were prepared as blends by Langmuir–Blodgett film deposition. Films were characterized by ellipsometry. For comparison, bulk blends are prepared by solution casting and the samples are characterized via differential scanning calorimetry. The increase in T_g as a function of TPP content for bulk high and low molar mass samples are in the order of ～10 °C. Whereas bulk T_g shows comparable increases for both molar masses (～10 °C), the increase in surface T_g for higher molar mass PtBA is greater than for low molar mass (～22 °C vs. ～10 °C). Nonetheless, the total enhancement of T_g is complete by the time 20 wt % TPP is added without further benefit at higher nanofiller loads. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 175–182     

Kinetics and mechanism for the CH2O + NO2 reaction: A computational study

The reactants, products, and transition states of the CH₂O + NO₂ reaction on the ground electronic potential energy surface have been searched at both B3LYP/6?311+G(d,p) and MPW1PW91/6?311+G(3df,2p) levels of theory. The forward and reverse barriers are further improved by a modified Gaussian‐2 method. The theoretical rate constants for the two most favorable reaction channels 1 and 2 producing CHO + cis‐HONO and CHO + HNO₂, respectively, have been calculated over the temperature range from 200 to 3000 K using the conventional and variational transition‐state theory with quantum‐mechanical tunneling corrections. The former product channel was found to be dominant below 1500 K, above which the latter becomes competitive. The predicted total rate constants for these two product channels can be presented by k_t (T) = 8.35 × 10^?11 T^6.68 exp(?4182/T) cm³/(mol s). The predicted values, which include the significant effect of small curvature tunneling corrections, are in quantitative agreement with the available experimental data throughout the temperature range studied (390–1650 K). © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 184–190, 2003     

Cyanogen pyrolysis and the CN + NO reaction behind incident shock waves

The reaction chemistry of C₂N₂? Ar and C₂N₂? NO? Ar mixtures has been investigated behind incident shock waves. Progress of the reaction was monitored by observing the cyano radical (CN) in absorption at 388.3 nm. A quantitative spectroscopic model was used to determine concentration histories of CN. From initial slopes of CN concentration during cyanogen pyrolysis, the rate constant for C₂N₂ + M → 2CN + M (1) was determined to be k₁ = (4.11 ± 1.8) × 10¹⁶ exp(?47,070 ± 1400/T) cm³/mol · s. A reaction sequence for the C₂N₂? NO system was developed, and CN profiles were computed. By comparison with experimental CN profiles the rate constant for the reaction CN + NO → NCO + N (3) was determined to be k₃ = 10^{(14.0 ± 0.3)} exp(?21,190 ± 1500/T) cm³/mol · s. In addition, the rate of the four-centered reaction CN + NO → N₂ + CO (2) was estimated to be approximately three orders of magnitude below collision frequency.     

Some connections between viscoelastic properties of PVC and plasticized PVC and molecular kinetics

A coupling model that has been shown in the past to be capable of relating macroscopically measured relaxation parameters to molecular ones has been presented. In this article the coupling model is applied to the analysis of stress relaxation data collected by Cama and Sternstein on PVC and plasticized PVC. The Kohlrausch-Williams-Watts form, exp — (t/τ*)^1?n, using n = 0.77 is found to be capable of describing the stress relaxation master curve at temperatures below the glass transition, T_g. From the temperature-independent apparent activation energy found by Cama and Sternstein, the primitive activation energy of the α-relaxation was calculated to be 7.5 kcal/mol, which is a reasonable value for the energy barrier to internal rotational isomerism in PVC. Support for this value is found from the data on two plasticized PVCs with different T_gs and apparent activation energies. By applying the coupling model in a similar manner, the primitive activation energies were found to be 8.5 kcal/mol for PVC plasticized with 6 pph dioctylphthalate and 7.7 kcal/mol for PVC plasticized with 6 pph tricresyl phosphate. Within experimental uncertainties, the three primitive activation energies can be considered to be the same. This finding is consistent with the physical basis for primitive activation energy and its identification with the internal rotation barrier, which should be independent of the type and amount of plasticizer in the system. Analysis of Cama and Sternstein's data on the effect of repeated stress aging on stress relaxation of quenched samples of PVC and plasticized PVC show that the coupling constant n increases systematically with each successive stress-aging cycle until it approaches the value for slow-cooled samples. These results are consistent with the notion that stress-aging changes the structural state of the glass in ways similar to physical aging.     

Phase transition in V5O9

Electrical resistivity, magnetic susceptibility, and heat capacity of V₅O₉ have been measured through its phase transition temperature (T_t) around 129 K. The associated changes in enthalpy and entropy were found to be 2095 J/mole and 19.24 J/mole · deg., respectively. A qualitative thermodynamic analysis has been attempted to correlate the crystal symmetry, electrical, magnetic, and heat capacity behavior at T_t. The metal-semiconductor transition appears as a consequence of the crystallographic order-disorder process, since the electrical and magnetic contributions to configurational entropy change are relatively small.