The Crosslinking of Ethylene-Vinyl Acetate with Organometaluc Compounds

Organometallic compounds such as aluminum trialkyl (AIR₃) and lithium alkyl react nonradically with ethylene-vinyl acetate copolymers (EVA) to yield very high crosslinking rates. The mechanism is characterized by simultaneous reactions: addition, reduction, and enolization accompanied with ethene and ethane elimination. The crosslinking reaction is exclusively due to enolization and subsequent dimerization. Systems containing anisole, ether, or quinoline together with AIEt₃ were investigated. It is shown that only free AIR₃ is able to crosslink EVA. The reaction mechanisms were proved experimentally. The process allows the production of polymers exhibiting improved mechanical properties. The polar groups formed during the reaction, and the metal content, improve the ability of the modified polymers to combine with polar polymers. This leads to an increase in adhesiveness to inorganic surfaces compared to radically crosslinked EVA.     

Para-Xylylenes and analogues by base-induced elimination from 1,4-bis-(dialkylsulfoniomethyl)arene salts in poly(1,4-arylene vinylene) synthesis by the wessling soluble precursor method

para-Xylylenes are generated by treatment of various 1,4-bis(dialkylsulfoniomethyl)arene dihalides with base in water, methanol, and aqueous acetonitrile, as shown by UV-Vis spectroscopy. This procedure allows the monitoring of the transient xylylene monomers that yield polyelectrolyte precursor polymers for poly(arylene vinylene)s, formed by variations of the chemistry developed originally by Wessling and co-workers. Alkoxy, alkyl, and halogen ring substituents on the sulfonium salt precursors do not greatly affect the ability to generate and observe the growth and decay of steady-state concentrations of the para-xylylene intermediates. Use of strong resonance-acceptor substituents—such as cyano or nitro—on the ring reduces production of a strong para-xylylene absorption, possibly due to reluctance of the ylides initially formed from the bis-sulfonium salts to eliminate to the xylylenes. By variation of UV-Vis conditions, it was found that use of 20% aqueous acetonitrile rather than water allowed formation of low to modest molecular weight polyelectrolytes in cyano-substituted cases (M_w = 8000–37,000). Use of UV-Vis test experiments should be useful for screening of bis sulfonium salt precursors that may be expected to give high molecular weight polyelectrolytes—in cases where para-xylylene formation is easy—as well as for finding reaction conditions that will optimize polymer formation. © 1992 John Wiley & Sons, Inc.     

Electrochemical preparation of some organotin compounds

Organotin dihalides R₂SnX₂ (X  Cl, Br, I) and their adducts with bidentate donor ligands have been prepared in high yield by the direct electrochemical reaction of metallic tin with alkyl or aryl halides in organic media at room temperature. Dimethyltin diiodide can be converted to tetramethyltin by reaction with methyl iodide at a cadmium anode. Electrochemical halide abstraction has been used to prepare R₆Sn₂ (R  Me, Ph) from the corresponding R₃Sn halide. The mechanism of these reactions is discussed.     

Polyimide–polyformal block copolymers

In an effort to combine and tailor the properties of thermoplastic resins we have investigated the synthesis of polyimide–polyformal block copolymers prepared by the condensation reaction of α,ω-diamino functionalized polyformal oligomers with α,ω-dianhydride terminated polyimide oligomers. Amino functionalized polyformal oligomers were synthesized by displacement condensation reactions of various bisphenols with methylene dihalides in the presence of base and aminophenols. Oligomeric aromatic polyformals having weight average molecular weights (MW_w) of 7500 to 40,000 were obtained. Anhydride terminated polyimide oligomers with molecular weights (MW_w) ranging from 10,000 to 15,000 were obtained by the condensation of bisphenol-A–dianhydride and aromatic amines. Combining the polyimide oligomers with the polyformal oligomers in dipolar aprotic or nonpolar solvents afforded the desired block copolymers. The polyimide–polyformal block copolymers generally display two distinct glass transition temperatures by differential scanning calorimetry. The (AB)_n block copolymers were evaluated by TGA in both air and N₂ for thermal/oxidative stability.     

The reaction of biphenyl radical anion and dianion with alkyl fluorides. From ET to SN2 reaction pathways and synthetic applications

The reaction of dilithium biphenyl (Li₂C₁₂H₁₀) with alkyl fluorides has been studied from the point of view of the distribution of products. Two main reaction pathways, the nucleophilic substitution (S_N2) and the electron transfer (ET), can compete to yield the same alkylation products in what is known as the S_N2-ET dichotomy. S_N2 seems to be the main mechanism operating with primary alkyl fluorides (n-RF). Alkylation proceeds in good yields, and the resulting alkylated dihydrobiphenyl anion (n-RC₁₂H₁₀Li) can be trapped with a second conventional electrophile (E⁺) affording synthetically interesting dearomatized biphenyl derivatives (n-RC₁₂H₁₀E). The reaction gives a higher amount of ET products as we move to secondary (s-RF) and to tertiary alkyl fluorides (t-RF), in which case the mechanism seems to be dominated by ET. In this case, alkylation by radical coupling is still feasible, giving access to the synthesis of t-RC₁₂H₁₀E, although in lower yields. A rational interpretation of this S_N2-ET dichotomy is given on the basis of the full distribution of products observed when 5-hexenyl fluoride and 1,1-dimethyl-5-hexenyl fluoride were are used as radical probes in their reaction with Li₂C₁₂H₁₀ and LiC₁₂H₁₀.     

The synthesis of diene and of vinyl copolymers containing predetermined quantities of polynuclear hydrocarbon or heterocyclic adducts—VI. Copolymers of butadiene,acenaphthylene or phenanthrene,and a linking agent

Reactions of tetrahydrofuran solutions of butadiene and acenaphthylene with alkali metal produce dianionic species which give quantitative yields of copolymers when subsequently titrated with alkyl dibromides. These polymers, however, crosslink on standing; this has been correlated with the presence of a proportion of 1,5-dihydroacenaphthylene adduct in the product.Similar reactions involving phenanthrene are not quantitative and yield materials containing only a small proportion of the phenanthrene added. The low efficiency has been attributed to the low electron affinity of phenanthrene and to the ability of its dianion to react with alkyl halides by electron transfer rather than metathetically.     

The synthesis of diene and of vinyl copolymers containing predetermined quantities of polynuclear hydrocarbon or heterocyclic adducts—II. The reaction of alkali metal salts of anthracene with alkyl halides

The reactions of alkali metal salts of anthracene with alkyl halides result in the formation of 9,10-dialkyl 9,10-dihydroanthracenes as the principal product, although appreciable quantities of other adducts, notably the 1,2- and 1,4-dialkyl compounds, are also formed.When the disodium salt is used, these adducts account for the total anthracene consumed, but with the dilithium salt appreciable quantities of 9,(4-hydroxybutyl) anthracene compounds are produced; they resulted from additive reaction of the salt with the tetrahydrofuran solvent. In the present experiments, these adducts account for about 20 per cent of the anthracene, but this proportion may be increased by prolonging the standing of the dilithium anthracene solution before reacting with alkyl halide.     

SYNTHESIS OF ORGANOGERMANE OLIGOMERS VIA LIGAND SUBSTITUTION POLYMERIZATION FROM 1, 4-DIOXANE COMPLEX OF GERMANIUM DICHLORIDE

Some organogermanium oligomers with different side groups were synthesized via li-gand substitution polymerization from 1, 4-dioxane complex of germanium dichloride withdifferent organolithitum compounds. The oligomers were isolated through either precipi-tation from methanol or extraction using toluene with a yield of no less than 50%. Theweiglit average molecular weight (M_w) of the oligomers is ranging from 1.4×10~3 to 5.9×10~3depending on the type and alkyl length of the organolithium compounds used.     

有机钛化学——Ⅰ.钛催化卤代烃还原反应的研究

本文报导了用多种不同的钛催化体系对卤代烃进行还原反应的结果。观察到二氯二茂钛、某些二氯二(取代茂基)钛和二茂钛甲基烯丙基配合物在异丙基溴化镁的存在下对卤代烃的还原是高效均相催化剂。在某些情怳下,有机溴化物和碘化物可以在非常温和的条件下被定量地还原。我们比较了不同类型的卤代芳烃、卤代烷烃和二卤代烃的还原,对催化剂用量和反应温度的影响也进行了研究。文中讨论了反应机理,认为以Cp₂TiH为催化反应的活性种,先是RX对Cp₂TiH氧化加成,再发生RH的还原消除,然后在格氏试剂的存在下Cp₂TiH再生,从而构成催化循环。     

Chemistry of a molybdenum-persulfide complex: Alkylation and oxidative coupling

The reaction of alkyl halides, sulfinyl and sulfonyl chlorides with (NH₄)₂[(S₂)₂MO(S₂)₂MO(S₂)₂] has been found to afford sulfides and disulfides in good-excellent isolated yield. The effect of solvent polarity and reaction time is discussed.     

Optimization of the synthesis of phenanthrene-2- and -3-sulfonyl chlorides

Sulfonation of phenanthrene with sulfuric acid, followed by neutralization with sodium hydroxide, gave a mixture of isomeric sodium phenanthrenesulfonates in an overall yield of 83%. Sodium phenanthrene-2-, -3-, and -9-sulfonates were isolated in 17, 43, and 4% yield, respectively. Sulfonation of phenanthrene with ClSO₃H or SO₃ did not improve the yields of phenanthrene-2- and -3-sulfonic acids. Treatment of sodium phenanthrene-2- and -3-sulfonates with PCl₅-POCl₃ or SOCl₂-DMF afforded the corresponding sulfonyl chlorides in 89 and 87 or 69 and 70% yield, respectively. Pure phenanthrene-2- and -3-sulfonyl chlorides were also synthesized in 27 and 51% yield by reaction of a mixture of 2- and 3-sulfonates with PCl₅-POCl₃.     

Conjugate addition of unactivated thiols to α,β-unsaturated ketones catalyzed by a bifunctional rhenium(V)–oxo complex

ReOCl₃(OPPh₃)(S(CH₃)₂) has been found to be an efficient bifunctional catalyst for the 1,4-addition of thiols to α,β-unsaturated ketones. The addition of thiophenol derivatives and alkyl thiols proceeds under mild reaction conditions without pre-activation of the thiol or exogenous base. Reactions of aryl, alkyl, and cyclic enones produce the corresponding β-sulfanyl ketones in good to excellent yield.     

Cationic oligomerization of anethole: Selective synthesis of dimers and trimers

A linear unsaturated dimer of anethole [II, (E)-1,3-bis(p-methoxyphenyl)-2-methylpentene-1], was prepared in 98% yield with an acetyl perchlorate (AcClO₄) catalyst in a nonpolar solvent (C₆H₆) at a high temperature (70°C). At 0°C a linear unsaturated trimer was formed in high yield with dimer II. The geometric structure of the linear unsaturated dimers was determined by analysis of the nuclear Overhauser effect (NOE) on their ¹H-NMR spectra. NOE analysis showed that at 0°C with AcClO₄, trans-anethole gives the (E)-form (II), whereas cis-anethole yields the (Z)-form. On the other hand, with a metal-halide catalyst (BF₃OEt₂) a cyclic dimer and a cyclic trimer were produced in high yields in a polar solvent [(CH₂Cl₂)] at 70°C; higher oligomers (≥ tetramer) were scarcely formed. The effect of catalysts on the structure of oligomers was explained in terms of the interaction between a growing carbocation and a counterion.     

Synthesis of the novel bifunctional ligand,dicyclopentadienylsulfide (C5H5)2S,and its dilithium salt

The dicyclopentadienylsulfide ligand (C₅H₅)₂S (1) was synthesized via reaction of CpTl with SCl₂. The dilithium salt Li₂[(C₅H₄S] (2) was obtained by the reaction of 1 with ⁿBuLi and was characterized spectroscopically.     

Study on the intermediate of photooxidative degradation of phenylenevinylene oligomers

The results of the investigation on photooxidative degradation of five phenylenevinylene oligomers are as follows. The sequence of the photodegradation rate in self-sensitized reaction is the same as that in the biacetyl-sensitized reaction and the rate of photooxidative degradation increases upon the incorporation of electron-donating groups and decreases upon the incorporation of electron-accepting groups on the oligomers. The self-sensitized reaction rate of oligomers increases as the solvent changing from benzene to deuterated benzene and decreases with the addition of the singlet oxygen (¹O₂) scavenger. ¹O₂ is shown to be the main reactive intermediate in self-sensitized photolysis of phenylenevinylene oligomers, which was directly confirmed by ESR spin trapping experiments.     

Enantioselective allylation of alkyl glyoxylates catalyzed by (salen)chromium(III) complexes

The enantioselective addition of allylstannanes and allylsilanes to alkyl glyoxylates of type 1, catalyzed by chiral (salen)Cr(III) complexes 3, has been studied. We have found that the reaction proceeded smoothly for low loading (1-2 mol %) of (1R,2R)-(salen)Cr(III)BF₄3a or (1R,2R)-(salen)Cr(III)ClO₄3c, and allyltributyltin under simple, undemanding conditions, affording (R)-2-hydroxypent-4-enoic acid esters 2 in good yield (61-90%) and enantioselectivity (58-76% ee).     

Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Samarium(II) Monoalkyl Complex Supported by a β-Diketiminato-Based Tetradentate Ligand: Synthesis,Structure, and Catalytic Hydrosilylation of Internal Alkynes

The synthesis and catalytic applications of trivalent rare-earth metal alkyl complexes have been well developed, but the chemistry of divalent rare-earth metal alkyl complexes lagged much behind. Herein, we report the synthesis, structure, and catalytic applications of a samarium(II) monoalkyl complex supported by a β-diketiminato-based tetradentate ligand, [LSmCH(SiMe₃)₂] (L=[MeC(NDipp)CHC(Me)NCH₂CH₂N(Me)CH₂CH₂NMe₂]⁻, Dipp=2,6-(iPr)₂C₆H₃). This complex is synthesized by the salt metathesis reaction of samarium iodide [LSm(μ-I)]₂ and KCH(SiMe₃)₂ in 63 % yield. Its structure is characterized by single-crystal X-ray diffraction, showing a distorted square-pyramid coordination geometry. This samarium(II) monoalkyl complex exhibits high catalytic activity in the hydrosilylation of aryl and methyl-substituted unsymmetrical internal alkynes with secondary hydrosilanes, selectively providing the α-(E) products in high yields.     

Cobalt complexes of 2,2′-bipyridine and 1,10-phenanthroline : II. Reactions with molecular hydrogen and conjugated dienes in the presence of tertiary phosphines

[CoChel(PR₃)₂]⁺ intermediates (Chel = 2,2′-bipyridine or 1,10-phenanthroline) undergo reversible addition of molecular hydrogen, to yield stable dihydridic derivatives. The reductive elimination step is light-accelerated. Dihydridic derivatives catalyze the hydrogenation of butadiene to butenes. They react also with alkyl halides (RX) giving [CoChel(PR₃)₂PX]⁺. Polarography confirms that Bipy or Phen are more useful than phosphines for stabilizing σ-CoC bonds in octahedral species of Co in low valence states.     

The introduction of hydroxyl functionality into polymers: The synthesis,polymerization, and hydrolysis of vinylbenzyl acetate

Vinylbenzyl acetate was synthesized in yields greater than 80% via the reaction of vinylbenzyl chloride with potassium acetate. Radical copolymerization of the monomer with styrene and methylmethacrylate were studied at 60°C. Reactivity ratios determined from FT-IR analysis of low conversion copolymerizations with styrene (M₁) were r₁ = 0.78 ± 0.07 and r₂ = 1.33 ± 0.13. Polymers and copolymers of vinylbenzyl acetate were found to completely hydrolyze in dioxane/water/base solution to yield hydroxymethyl functionality. Size exclusion chromatography studies indicated that the hydrolysis proceeded without crosslinking. This procedure is a useful method for the introduction of hydroxyl functionality on polymers and avoids crosslinking problems common in previously reported methods.