Chiral analysis of helquats by capillary electrophoresis: resolution of helical N-heteroaromatic dications using randomly sulfated cyclodextrins

Enantiomers of helical N-heteroaromatic dications, helquats, were separated by CE. An acidic 22/35 mM sodium/phosphate background electrolyte, pH 2.4, with addition of randomly sulfated α-, β- and γ- cyclodextrins allowed enantioresolution of a series of helquats, which comprised 5, 6 and 7 fused rings participating in the helical backbone. In general, at least one of the chiral selectors was found to provide baseline separation for 22 out of 24 helquats and partial separation for the remaining two. Individually, the sulfated γ-cyclodextrin turned out to separate 79% of the helquats, followed by the β- and α-congeners with 54 and 42% of the resolved compounds, respectively. Migration order of enantiomers was inspected for selected helquats and a relation of molecular size of the analytes to a cavity of the cyclodextrin selectors is discussed.     

Chiral recognition of functionalized cyclodextrins in capillary electrophoresis

The chiral recognition of hydroxypropylated, dimethylated, and sulfated cyclodextrins was evaluated by utilizing them as chiral additives in capillary electrophoresis. Although each selector yielded enantiomeric separations of most of the target analytes, differences were observed in the electrophoretic results for the different derivatized cyclodextrins and for additives having varying degrees of substitution. The results for the sulfated cyclodextrins also highlighted the importance of knowing the degree of substitution as well as the location of the substituents when comparing chiral selectors.     

毛细管电泳的手性拆分(文献综述)

 根据最近文献,对毛细管电泳在手性拆分领域中的应用和发展进行了评述,包括各种操作模式和各类手性选择剂,进一步评述了手性拆分机理的研究,显示出毛细管电泳是手性拆分的一种高效、快速、简便的分离手段。     

Enantiomers resolution in capillary zone electrophoresis by using cyclodextrins.

Cyclodextrins added to the background electrolyte are shown to be useful for the resolution of racemic compounds in their enantiomers. Several parameters have to be controlled in order to achieve resolution, e.g., cyclodextrin type, concentration, analyte shape, as well as column temperature. The resolution of nor-epinephrine, epinephrine and isoproterenol in their enantiomers decreased by increasing the column temperature. Octopamine and ketamine have been resolved by supporting the background electrolyte with 2, 6-di-O-methyl-beta-cyclodextrin. In spite of the stronger inclusion-complex of ketamine than octopamine with the modified cyclodextrin its resolution was not satisfactory.     

Chiral resolution of basic drugs by capillary electrophoresis with new glycosaminoglycans

New glycosaminoglycans, fucose-containing glycosaminoglycan (FGAG) and depolymerized holothurian glycosaminoglycan (DHG), were investigated as chiral additives for the separation of drug enantiomers by capillary electrophoresis. The average molecular masses of FGAG and DHG were estimated to be about 59,000 and 14,000, respectively. A variety of basic drug enantiomers were resolved using 10 mM phosphate buffer, pH 5.0, containing 3% FGAG or DHG. Since chiral recognition properties of FGAG and DHG are different, some drug enantiomers were only separated by using FGAG or DHG. With regard to comparison of chiral recognition abilities of FGAG and DHG with other chiral selectors, tolperisone and eperisone enantiomers were not separated with alpha- or beta-cyclodextrin, or heparin as the chiral additives, but were separated with FGAG and DHG. The results obtained reveal that FGAG and DHG are useful as the chiral selectors for separations of drug enantiomers by CE, and that they could be complementarily used with other chiral additives.     

Chiral resolution of some environmental pollutants by capillary electrophoresis

The chiral resolution of the environmental pollutants by capillary electrophoresis is reviewed. Various aspects of the chiral resolution such as chiral selectors, optimization of capillary electrophoresis conditions including composition of the background electrolyte (BGE), pH of the BGE, ionic strength of the BGE, structures and types of the chiral selectors, applied voltage, temperature, structures of the chiral pollutants, use of organic modifiers and other parameters are presented. Furthermore, detection, sample treatment, validation of the methods, and the chiral recognition mechanisms, have been discussed.     

Chiral recognition of imperanene enantiomers by various cyclodextrins: a capillary electrophoresis and NMR spectroscopy study

The enantiomers of imperanene, a novel polyphenolic compound of Imperata cylindrica (L.), were separated via cyclodextrin-modified capillary electrophoresis. The anionic form of the analyte at pH 9.0 was subject to complexation and enantioseparation CE studies with neutral and charged cyclodextrins. As chiral selectors 27 CDs were applied differing in cavity size, sidechain, degree of substitution (DS) and charge. Three hydroxypropylated and three sulfoalkylated CD preparations provided enantioseparation and the migration order was successfully interpreted in each case in terms of complex mobilities and stability constants. The best enantioresolution (R(S) =?1.26) was achieved using sulfobutyl-ether-γ-CD (DS ～4), but it could be enhanced by extensive investigations on dual selector systems. After optimization (CD concentrations and pH) R(S) =?4.47 was achieved using a 12.5 mM sulfobutyl-ether-γ-CD and 10 mM 6-monodeoxy-6-mono-(3-hydroxy)-propylamino-β-cyclodextrin dual system. The average stoichiometry of the complex was determined with Job's method using NMR-titration and resulted in a 1:1 complex for both (2-hydroxy)propyl-β- and sulfobutyl-ether-γ-CD. Further NMR experiments suggest that the coniferyl moiety of imperanene is involved in the host-guest interaction.     

Chiral capillary electrophoretic resolution of baclofen, gabaergic ligand, using highly sulfated cyclodextrins

Using cyclodextrin-capillary zone electrophoresis (CD-CZE), baseline separation of baclofen, a potent GABA(B) agonist; was achieved. A method for the enantioresolution of this gamma-aminobutyric acid (GABA) and determination of enantiomeric purity was developed using CDs (highly sulfated-CD or highly S-CD) as chiral selectors and capillaries dynamically coated with polyethylene oxide (PEO). Operational parameters, such as the nature and concentration of the chiral selectors, buffer concentration, organic modifiers, and applied voltage, were investigated. The use of charged CDs provides a driving force in the opposite direction of the positively charged baclofen in the running buffer and enantiomeric resolution by inclusion of compounds in the CD cavity. Highly S-beta-CD was found to be the most effective complexing agent, allowing good enantiomeric resolution. The complete resolution was obtained using 25 mM phosphate buffer, pH 2.5, containing 3% w/v highly S-beta-CD at 25 degrees C with aN applied field of 0.40 kV/cm. The apparent association constants of the inclusion complexes were calculated. This optimized method was validated in terms of repeatability and limits of detection (0.13 microg x mL(-1)) and quantification. The migration order was determined.     

The separation of the enantiomers of diquats by capillary electrophoresis using randomly sulfated cyclodextrins as chiral selectors

Diquats, derivatives of the widely used herbicide diquat, represent a new class of functional organic molecules. A combination of their special electrochemical properties and axial chirality could potentially result in their important applications in supramolecular chemistry, chiral catalysis, and chiral analysis. However, prior to their practical applications, the diquats have to be prepared in enantiomerically pure forms and the enantiomeric purity of their P- and M-isomers has to be checked. Hence, a chiral capillary electrophoresis (CE) method has been developed and applied for separation of P- and M-enantiomers of 11 new diquats. Fast and better than baseline CE separations of enantiomers of all 11 diquats within a short time 5–7 min were achieved using acidic buffer, 22 mM NaOH, 35 mM H₃PO₄, pH 2.5, as a background electrolyte, and 6 mM randomly sulfated α-, β-, and γ-cyclodextrins as chiral selectors. The most successful selector was sulfated γ-cyclodextrin, which baseline separated the enantiomers of all 11 diquats, followed by sulfated β-cyclodextrin and sulfated α-cyclodextrin, which baseline separated enantiomers of 10 and nine diquats, respectively. Using this method, a high enantiopurity degree of the isolated P- and M-enantiomers of three diquats with a defined absolute configuration was confirmed and their migration order was identified.     

Separation of drug stereoisomers by capillary electrophoresis with cyclodextrins

Using capillary electrophoresis, the enantiomers and isomers of several chiral drug molecules were resolved with cyclodextrins. Parameters affecting the resolution between (+)- and (−)-epinephrine, such as pH, cyclodextrin concentration, buffer concentration, and capillary dimensions were investigated. In addition to this, the effect of cyclodextrin type (β and several derivatized β-cyclodextrins) on resolution between stereoisomers of several chiral drug was also investigated. This study showed that the structural features of the molecule, the derivative groups on the cyclodextrin, the buffer composition and the capillary dimensions influence resolution. The chiral drugs used in this study were propranolol, atenolol, betaxolol, dipivefrin, AL03152 (an aldose reductase inhibitor), AL03363 (an oxidation product of AL03152) and the cis/trans isomers of pilocarpine.     

Chiral separation of hydroxyflavanones in cyclodextrin-modified capillary zone electrophoresis using sulfated cyclodextrins as chiral selectors

Chiral separations of three hydroxyflavanone aglycones, including 2'-, 3'-, and 4'-hydroxyflavanone, in capillary zone electrophoresis (CZE) using randomly sulfate-substituted beta-cyclodextrin (S-beta-CD) or dual cyclodextrin (CD) systems consisting of S-beta-CD and a neutral CD at low pH were investigated. The results indicate that S-beta-CD is an excellent chiral selector for enantioseparation of 2'-hydroxyflavanone and is a good chiral selector for 3'-hydroxyflavanone. Depending on the concentration of S-beta-CD ranging from 2.0 to 0.75% (w/v), the enantioresolution values were 10.5-19.5 and 1.8-3.4 for 2'- and 3'-hydroxyflavanone, respectively. The enantiomers of 4'-hydroxyflavanone could be effectively separated with S-beta-CD at a concentration of 2.0% (w/v) within 20 min. The enantioselectivity and enantioresolution follow the order 2'-hydroxyflavanone>3'-hydroxyflavanone>4'-hydroxyflavanone. Alternatively, with the addition of sodium dodecyl sulfate (SDS) monomers at low concentrations in the electrophoretic system, enantioselectivity of these hydroxyflavanone aglycones could be enhanced with dual CD systems. In this case, SDS monomer acted as a complexing agent probably first with S-beta-CD and then subsequently with the analytes for increasing the effective electrophoretic mobility of the analytes towards the anode and as a selectivity controller for affecting the selectivity of hydroxyflavanones. Better enantioseparation between 2'-hydroxyflavanone and 3'-hydroxyflavanone could be achieved with a dual CD system consisting of S-beta-CD and gamma-CD than that with S-beta-CD and beta-CD. In addition, possible chiral recognition mechanisms of hydroxyflavanones are discussed.     

Chiral separation of lobeline analogs using high performance capillary electrophoresis and derivatized cyclodextrins as chiral additives

High performance capillary electrophoresis (HPCE) methods are described that will separate the enantiomers of various lobeline analogs synthesized in these laboratories. "Cyclodextrin array analysis" was used for preliminary screening and electrophoresis conditions were optimized for each investigated analog. The lobeline analogs under consideration were investigated as potential nicotinic agonists for the treatment of neurodegenerative disorders, such as Alzheimer's disease. Native alpha (alpha)-, beta (beta)-, and gamma (gamma)-cyclodextrins, methyl-beta-cyclodextrin (M-beta-CD), heptakis-(2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CD), and heptakis-(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD), hydroxypropyl-alpha-cyclodextrin (HP-alpha-CD), hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and hydroxypropl-gamma-cyclodextrin (HP-gamma-CD) were used as run buffer additives and their effect on the enantiomeric resolution of the lobeline analogs was investigated. The effect of pH, buffer concentration, voltage, temperature and organic modifier concentration on the enantiomeric resolution of the lobeline analogs was investigated. The most suitable conditions for each compound were chosen and, with detection at a wavelength of 200 nm, optimized.     

Influence of the amino acid sequence and nature of the cyclodextrin on the separation of small peptide enantiomers by capillary electrophoresis using randomly substituted and single isomer sulfated and sulfonated cyclodextrins

The separation of dipeptide and tripeptide enantiomers using negatively charged single isomers as well as randomly sulfated and sulfonated cyclodextrins (CDs) was investigated with respect to the amino acid sequence of the peptides and the nature of the CDs. Standardized conditions concerning buffer pH and molarity, CD concentration, and separation voltage were applied. Compared to suffobutylether-beta-CD and heptakis-(2,3-dimethyl-6-sulfato)-beta-CD, randomly sulfated beta-CD as well as the single isomer derivatives heptakis-6-sulfato-beta-CD and heptakis-(2,3-diacetyl-6-sulfato)-beta-CD were the more universal CDs for enantioseparations. The enantiomer migration order depended to a greater extent on the CD than on the amino acid sequence of the peptide although small structural differences such as formation of a peptide amide or ester affected the chiral recognition by the randomly substituted CD derivatives. Using sulfobutylether-beta-CD or heptakis-(2,3-diacetyl-6-sulfato)-beta-CD the DD enantiomers migrated before the LL enantiomers for most peptides while the opposite migration order, i.e. LL before DD, was observed when heptakis-6-sulfato-beta-CD was applied as chiral selector.     

Peaks in capillary zone electrophoresis: fact or fiction

Non-steady-state electrophoretic processes can be estimated by a repeated application of a steady-state model based on the electroneutrality equation, the modified version of Ohm's law, and the mass balances of the co- and counterions. With such a mathematical model, all parameters in sample zones in capillary zone electrophoresis (CZE) can be calculated. The relationships between the calculated parameters for sample zones in CZE, such as the pH, concentrations of co- and counterions, and the ratio E1m1/E2m2 versus the mobilities of both anionic and cationic analytes can be visualized in a SystChart, a set of eight panels, for a given background electrolyte (BGE). All properties of a zone, such as the fronting/tailing character and the question of peaks/dips can be read from such a SystChart. Applying n coions, n-1 discontinuities are present in such a SystChart, indicating the presence of system peaks applying that BGE. For BGEs with one coion, no system peaks (discontinuities) exist at moderate pH values. SystCharts calculated for BGEs with a low pH do show discontinuities, however, which indicates that system peaks are present in electropherograms applying BGEs at low pH. Experimentally, it is shown that system peaks are indeed present in electropherograms applying BGEs with one coion at low pH and the mobilities of the system peaks generally increase with decreasing pH. Hydrogen ions seem to act as a second coionic species. Of course, these system peaks are only visible in the UV signal if the BGE has UV-absorbing properties.     

Chiral separation in capillary electrophoresis using dual neutral cyclodextrins: theoretical models of electrophoretic mobility difference and separation selectivity

Simple equations and theoretical models, related to enantioselectivity (kappa) and C, have been developed for prediction of electrophoretic mobility difference (Deltamu) and separation selectivity (alpha) for enantiomers in CE using dual CDs, where alpha and kappa are defined as the ratio of mu and the ratio of binding constant (K) for enantiomers to each CD, respectively, C the CD concentration, and the average K for enantiomers and each CD. Experiments were carried out using dual CDs as beta-CD and dimethyl-beta-cyclodextrin (DM-beta-CD) and test analytes as five pairs of amphetamine drug enantiomers. A change in observed Deltamu and alpha of enantiomers in dual CDs was found to be in excellent agreement with the theoretical models. For example, in comparison with single CD1, dual CDs can enhance Deltamu and alpha up to the maximum value when enantiomers migrate with the same order in CD1 and CD2, and have the value of rho > 1.0, where rho is the enantioselectivity ratio for CD2 to CD1, while worse Deltamu and alpha are obtained for enantiomers with rho < 1.0.     

Enantioseparation of venlafaxine andO-desmethylvenlafaxine by capillary electrophoresis with mixed cyclodextrins

Summary Capillary electrophoresis (CE) has been successfully applied to the separation of the enantiomers of venlafaxine (Vx) and its main active metabolite,O-desmethylvenlafaxine (ODV), by use of a mixture of two cyclodextrins (CDs) added to the background electrolyte (BGE). The use of carboxymethylated β-cyclodextrin (CMB) enabled the enantioseparation of both Vx and ODV, although separation of all four enantiomers was not achieved. Addition of a second cyclodextrin (α-CD) to the BGE resulted in the simultaneous resolution of the enantiomers of both compounds. In this system, α-CD enabled discrimination between Vx and ODV whereas CMB enabled the enantioseparation. Resolution was strongly influenced by the ratio of the concentrations of the two complexing agents. Baseline resolution of Vx and ODV was achieved in an uncoated capillary. Addition of organic modifiers to the BGE had a substantial effect on the interaction of the analytes with the α-CD.     

Chiral separation of local anaesthetics with capillary electrophoresis

Summary A chiral capillary electrophoresis system for the highresolution separation of the enantiomers of the local anaesthetics mepivacaine, ropivacaine, bupivacaine and prilocaine is described. Triethanolamine was added to the background electrolyte to obtain a negative electroosmotic flow and hence higher resolutions. The interactions of the local anaesthetics and their chemical analogues with the chiral selector, dimethyl--cyclodextrin, were studied. From a model describing chiral capillary electrophoresis, the association equilibrium constants were determined by curve-fitting. The separation of mepivacaine, ropivacaine and bupivacaine was due to the different mobilities of the free analytes in solution, whereas the separation of a pair of enantiomers of a single analyte was due to differences between the association equilibrium constantsK ₁ andK ₂. Branching of the alkyl chain, which was situated close to the cavity in the inclusion complex, had strong effects on the chiral separation of the enantiomers.     

Chiral separation and determination of the optical purity of thiamphenicol-related chiral compound by capillary zone electrophoresis with cyclodextrins as chiral selectors

Summary One classical method for quantitation of amino acids in proteins is hydrolysis of the proteins and determination of the free amino acids. Although the drastic experimental conditions necessary for complete hydrolysis always cause degradation of some of the amino acids, if mild hydrolysis conditions are used, a mixture of amino acids and oligopeptides is obtained. If these conditions are adequately tuned, the oligopeptides are almost exclusively dipeptides. For this reason we have initiated a study to find a derivatizing agent suitable for the analysis of amino acids and dipeptides by an absolute method of quantitation already tested for amino acids. FMOC-Cl was found to be a suitable derivatizing agent for this purpose.     

Enantioselective determination by capillary electrophoresis with cyclodextrins as chiral selectors

This review surveys the separation of enantiomers by capillary electrophoresis using cyclodextrins as chiral selector. Cyclodextrins or their derivatives have been widely employed for the direct chiral resolution of a wide number of enantiomers, mainly of pharmaceutical interest, selected examples are reported in the tables. For method optimisation, several parameters influencing the enantioresolution, e.g., cyclodextrin type and concentration, buffer pH and composition, presence of organic solvents or complexing additives in the buffer were considered and discussed. Finally, selected applications to real samples such as pharmaceutical formulations, biological and medical samples are also discussed.