Crystallographic characterization of isomer 2 of Er2@C82 and comparison with isomer 1 of Er2@C82

The X-ray crystal structure of (Isomer 2 of Er2@C82). NiII(OEP).2(benzene) shows that the fullerene cage in Isomer 2 of Er2@C82 is the C3v isomer (82:8) and that the erbium ions are distributed over 23 interior sites with occupancies ranging from 0.25 to 0.03.     

The shape of the Sc2(μ2-S) unit trapped in C82: crystallographic, computational, and electrochemical studies of the isomers, Sc2(μ2-S)@C(s)(6)-C82 and Sc2(μ2-S)@C(3v)(8)-C82

Single-crystal X-ray diffraction studies of Sc(2)(μ(2)-S)@C(s)(6)-C(82)·Ni(II)(OEP)·2C(6)H(6) and Sc(2)(μ(2)-S)@C(3v)(8)-C(82)·Ni(II)(OEP)·2C(6)H(6) reveal that both contain fully ordered fullerene cages. The crystallographic data for Sc(2)(μ(2)-S)@C(s)(6)-C(82)·Ni(II)(OEP)·2C(6)H(6) show two remarkable features: the presence of two slightly different cage sites and a fully ordered molecule Sc(2)(μ(2)-S)@C(s)(6)-C(82) in one of these sites. The Sc-S-Sc angles in Sc(2)(μ(2)-S)@C(s)(6)-C(82) (113.84(3)°) and Sc(2)(μ(2)-S)@C(3v)(8)-C(82) differ (97.34(13)°). This is the first case where the nature and structure of the fullerene cage isomer exerts a demonstrable effect on the geometry of the cluster contained within. Computational studies have shown that, among the nine isomers that follow the isolated pentagon rule for C(82), the cage stability changes markedly between 0 and 250 K, but the C(s)(6)-C(82) cage is preferred at temperatures ≥250 °C when using the energies obtained with the free encapsulated model (FEM). However, the C(3v)(8)-C(82) cage is preferred at temperatures ≥250 °C using the energies obtained by rigid rotor-harmonic oscillator (RRHO) approximation. These results corroborate the fact that both cages are observed and likely to trap the Sc(2)(μ(2)-S) cluster, whereas earlier FEM and RRHO calculations predicted only the C(s)(6)-C(82) cage is likely to trap the Sc(2)(μ(2)-O) cluster. We also compare the recently published electrochemistry of the sulfide-containing Sc(2)(μ(2)-S)@C(s)(6)-C(82) to that of corresponding oxide-containing Sc(2)(μ(2)-O)@C(s)(6)-C(82).     

Which do endohedral Ti2C80 metallofullerenes prefer energetically: Ti2@C80 or Ti2C2@C78? A theoretical study

Four possible isomers of the Ti2C80 metallofullerene are discussed in detail at the B3LYP DFT level of theory: two isomers in Ti2@C80 formula with two Ti atoms encapsulated inside a C80 cage and the other two in Ti2C2@C78 formula with a Ti2C2 cluster involved inside a C78 cage. In the encaged Ti2C2 cluster, there are end-on and side-on C2 bridging modes into the two Ti atoms. The optimized end-on cluster has a linear Ti-C-C-Ti array, whereas the side-on cluster has a butterfly-like structure where the two Ti atoms and the C2 unit do not lie in a plane. DFT calculations show that the Ti2C2@C78 molecule with the end-on Ti2C2 cluster is energetically most favorable in the four isomers. Stabilities of the Ti2C80 molecules are essentially dominated by Ti binding sites inside fullerene cages. The Ti atoms bind over the hexagon rings in preference to a junction between hexagon and pentagon rings. In the Ti2C2@C78 molecules, orbital interactions between the Ti2C2 cluster and the outer cage play a significant role in determining the C2 bridging modes into the dititanium center and their relative stabilities.     

Understanding the stabilization of metal carbide endohedral fullerenes m(2)c(2)@c(82) and related systems

We analyze the electronic structure of carbide endohedral metallofullerenes of the type Sc(2)C(2)@C(82) and study the possibility of rotation of the encapsulated Sc(2)C(2) moiety in the interior of the cage. Moreover, we rationalize the higher abundance of M(2)C(2)@C(82) (M = Sc, Y) in which the metal-carbide cluster is encapsulated in the C(3v)-C(82):8 carbon cage with respect to other carbides of the same family on the basis of the formal transfer of four electrons from the cluster to the cage and sizeable (LUMO-3)-(LUMO-2) gap in the empty cages. This rule also applies to all those endohedral metallofullerenes in which the encapsulated cluster transfers four electrons to the carbon cage as, for example, the reduced [M@C(82)](-) systems (M = group 3 or lanthanide metal ion).     

Sc2C2@C80 rather than Sc2@C82: templated formation of unexpected C2v(5)-C80 and temperature-dependent dynamic motion of internal Sc2C2 cluster

Unambiguous X-ray crystallographic results of the carbene adduct of Sc(2)C(82) reveal a new carbide cluster metallofullerene with the unexpected C(2v)(5)-C(80) cage, that is, Sc(2)C(2)@C(2v)(5)-C(80). More interestingly, DFT calculations and NMR results disclose that the dynamic motion of the internal Sc(2)C(2) cluster depends strongly on temperature. At 293 K, the cluster is fixed inside the cage with two nonequivalent Sc atoms on the mirror plane, thereby leading to C(s) symmetry of the whole molecule. However, when the temperature increases to 413 K, the (13)C and (45)Sc NMR spectra show that the cluster rotates rapidly inside the C(2v)(5)-C(80) cage, featuring two equivalent Sc atoms and weaker metal-cage interactions.     

X-ray structures of Sc2C2@C2n (n = 40-42): in-depth understanding of the core-shell interplay in carbide cluster metallofullerenes

X-ray analyses of the cocrystals of a series of carbide cluster metallofullerenes Sc(2)C(2)@C(2n) (n = 40-42) with cobalt(II) octaethylporphyrin present new insights into the molecular structures and cluster-cage interactions of these less-explored species. Along with the unambiguous identification of the cage structures for the three isomers of Sc(2)C(2)@C(2v)(5)-C(80), Sc(2)C(2)@C(3v)(8)-C(82), and Sc(2)C(2)@D(2d)(23)-C(84), a clear correlation between the cluster strain and cage size is observed in this series: Sc-Sc distances and dihedral angles of the bent cluster increase along with cage expansion, indicating that the bending strain within the cluster makes it pursue a planar structure to the greatest degree possible. However, the C-C distances within Sc(2)C(2) remain unchanged when the cage expands, perhaps because of the unusual bent structure of the cluster, preventing contact between the cage and the C(2) unit. Moreover, analyses revealed that larger cages provide more space for the cluster to rotate. The preferential formation of cluster endohedral metallofullerenes for scandium might be associated with its small ionic radius and the strong coordination ability as well.     

Addition of adamantylidene to La2@C78: isolation and single-crystal X-ray structural determination of the monoadducts

Thermal and photochemical reactions of La2@C78 with 2-admantane-2,3-[3H]-diazirine are investigated. Four isomers of the monoadduct (La2@C78Ad) synthesized by the photoreaction are isolated by HPLC and characterized by mass, UV-vis-NIR absorption, cyclic voltammogram and differential pulse voltammogram spectroscopy, proton and 13C NMR spectroscopic analysis, single-crystal X-ray diffraction analysis, and theoretical approaches. The addition reactions occur at both the [5,6] and [6,6] positions. X-ray and theoretical studies indicate that one of the monoadduct isomers has an open structure with two La atoms on the C3 axis of the D3h cage of La2@C78.     

13C NMR spectroscopic study of scandium dimetallofullerene, Sc2@C84 vs. Sc2C2@C82

Although Sc2C84 has been widely believed to have the form Sc2@C84, the present 13C NMR study reveals that it is a scandium carbide metallofullerene, Sc2C2@C82, which has a C82(C(3v)) cage.     

Sc2@C3v(8)-C82 vs. Sc2C2@C3v(8)-C82: drastic effect of C2 capture on the redox properties of scandium metallofullerenes

We describe the first example of scandium dimetallofullerenes, Sc(2)@C(3v)(8)-C(82), which has the same cage as the previously assigned scandium carbide cluster fullerene Sc(2)C(2)@C(3v)(8)-C(82) but they exhibit distinctly different electronic configurations and electronic behaviours, confirming the drastic influence of the internal C(2) unit.     

X-ray Crystallographic Characterization of New Soluble Endohedral Fullerenes Utilizing the Popular C(82) Bucky Cage. Isolation and Structural Characterization of Sm@C(3v)(7)-C(82), Sm@C(s)(6)-C(82), and Sm@C(2)(5)-C(82)

Three isomers of Sm@C(82) that are soluble in organic solvents were obtained from the carbon soot produced by vaporization of hollow carbon rods doped with Sm(2)O(3)/graphite powder in an electric arc. These isomers were numbered as Sm@C(82)(I), Sm@C(82)(II), and Sm@C(82)(III) in order of their elution times from HPLC chromatography on a Buckyprep column with toluene as the eluent. The identities of isomers, Sm@C(82)(I) as Sm@C(s)(6)-C(82), Sm@C(82)(II) as Sm@C(3v)(7)-C(82), and Sm@C(82)(III) as Sm@C(2)(5)-C(82), were determined by single-crystal X-ray diffraction on cocrystals formed with Ni(octaethylporphyrin). For endohedral fullerenes like La@C(82), which have three electrons transferred to the cage to produce the M(3+)@(C(82))(3-) electronic distribution, generally only two soluble isomers (e.g., La@C(2v)(9)-C(82) (major) and La@C(s)(6)-C(82) (minor)) are observed. In contrast, with samarium, which generates the M(2+)@(C(82))(2-) electronic distribution, five soluble isomers of Sm@C(82) have been detected, three in this study, the other two in two related prior studies. The structures of the four Sm@C(82) isomers that are currently established are Sm@C(2)(5)-C(82), Sm@C(s)(6)-C(82), Sm@C(3v)(7)-C(82), and Sm@C(2v)(9)-C(82). All of these isomers obey the isolated pentagon rule (IPR) and are sequentially interconvertable through Stone-Wales transformations.     

M2@C79N (M = Y, Tb): isolation and characterization of stable endohedral metallofullerenes exhibiting M-M bonding interactions inside aza[80]fullerene cages

Y2@C79N and Tb2@C79N have been prepared by conducting the Kratschmer-Huffman electric-arc process under 20 Torr of N2 and 280 Torr of He with metal oxide-doped graphite rods. These new heterofullerenes were separated from the resulting mixture of empty cage fullerenes and endohedral fullerenes by chemical separation and a two-stage chromatographic process. Crystallographic data for Tb2@C79N x Ni(OEP) x 2 C6H6 demonstrate the presence of an 80-atom cage with idealized I(h) symmetry and two, widely separated Tb atoms inside with a Tb-Tb separation of 3.9020(10) A for the major terbium sites. The EPR spectrum of the odd-electron Y2@C79N indicates that the spin density largely resides on the two equivalent yttrium ions. Computational studies on Y2@C79N suggest that the nitrogen atom resides at a 665 ring junction in the equator on the fullerene cage and that the unpaired electron is localized in a bonding orbital between the two yttrium ions of this stable radical. Thus, the Tb-Tb bond length of the single-electron bond is an exceedingly long metal-metal bond.     

Chemical understanding of a non-IPR metallofullerene: stabilization of encaged metals on fused-pentagon bonds in La2@C72

Fullerenes violating the isolated pentagon rule (IPR) are only obtained in the form of their derivatives. Since the [5,5]-bond carbons are highly reactive, they are easily attacked by reagents to release the bond strains. Non-IPR endohedral metallofullerenes, however, still have unsaturated sp (2) carbons at the [5,5] bond junctions, which allow their chemical properties to be probed. In this work, La 2@C 72 was chosen as a representative non-IPR metallofullerene, since it has been experimentally proposed to have either the #10611 or #10958 non-IPR cage structure ( J. Am. Chem. Soc. 2003, 125, 7782 ), while theoretical calculations have suggested that the #10611 cage is more stable ( J. Phys. Chem. A 2006, 110, 2231 ). La 2@C 72 was modified by photolytic reaction with the carbene reagent 2-adamantane-2,3-[3H]-diazirine. Six isomers of adamantylidene monoadducts were isolated and characterized using various kinds of measurements, including high-performance liquid chromatography, matrix-assisted laser desorption ionization mass spectrometry, UV-vis-near-infrared spectroscopy, cyclic voltammetry, differential-pulse voltammetry, (13)C NMR spectroscopy, and single-crystal X-ray diffraction. Electronic spectra and electrochemical studies revealed that the essential electronic structures of La 2@C 72 are retained in the six isomers and the adamantylidene group acts as a weak electron-donating group toward La 2@C 72. X-ray structural results unambiguously elucidated that La 2@C 72 has the #10611 chiral cage (i.e., D 2 symmetry) with two pairs of fused pentagons at each pole of the cage and that the two La atoms reside close to the two fused-pentagon pairs. On the basis of these results and theoretical calculations, it is concluded that the fused-pentagon sites are very reactive toward carbene but that the carbons forming the [5,5] junctions are less reactive than the adjacent ones; this confirms that these carbons interact strongly with the encaged metals and thus are stabilized by them.     

Trifluoromethyl derivatives of insoluble small-HOMO-LUMO-gap hollow higher fullerenes. NMR and DFT structure elucidation of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12, C2-(C78-D3h(5))(CF3)12, Cs-(C80-C2v(5))(CF3)12, and C2-(C82-C2(5))(CF3)12

Reaction of a mixture of insoluble higher fullerenes with CF3I at 500 degrees C produced a single abundant isomer of C74(CF3)12, C76(CF3)12, and C80(CF3)12, two abundant isomers of C78(CF3)12 and C82(CF3)12, and an indeterminant number of isomers of C84(CF3)12. Using a combination of 19F NMR spectroscopy, DFT calculations, and the structures and spectra of previously reported fullerene(CF3)n compounds, the most-probable structures of six of the seven isolated compounds were determined to be specific isomers of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12), C2-(C78-D3h(5))(CF3)12), Cs-(C80-C2v(5))(CF3)12), C2-(C82-C2(5))(CF3)12), and C2-(C82-C2(3))(CF3)12) containing ribbons and/or loops of edge-sharing para-C6(CF3)2 hexagons. The seventh isolated compound is a C1 isomer of C78(CF3)12 containing two such ribbons. This set of compounds represents only the second reported isolable compound with the hollow C74-D3h cage and the first experimental evidence for the existence of the hollow fullerenes C76-Td(2), C78-D3h(5), C80-C2v(5), and C82-C2(5) in arc-discharge soots.     

Theoretical study of the adsorption of silver atoms on the (111) face of silicon

The adsorption of one or many silver atoms on a (111) silicon face (reduced to 61 dangling atomic orbitals) is investigated by means of a self-consistent Hartree–Fock method parametrized from atomic and thermodynamical data. The valley sites (above three Si atoms) are favored over the top sites (above one Si atom). The extrapolation of the results obtained for several structures corresponding to the adsorption of n = 1, 2, 3, 4, 6, and 7 Ag atoms allows us to conclude that the most stable structures correspond: for \documentclass{article}\pagestyle{empty}\begin{document}$ \theta = \frac{1}{3} $\end{document} to linear Ag chains (3 × 1 phase), for \documentclass{article}\pagestyle{empty}\begin{document}$ \theta = \frac{2}{3} $\end{document} to an honeycomb lattice (\documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt 3 \times \sqrt 3 $\end{document} phase), and for θ = 1 to a centred hexagonal lattice (\documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt 3 \times \sqrt 3 $\end{document} phase), the Ag atoms located at the centers of the hexagons being beneath the plan of the hexagons. The adsorption energies corresponding to the various θ are practically equal (ca. 3 eV/Ag). The net charges of Ag atoms are equal to 0.35.     

Structures, stabilities, electronic, and optical properties of C64 fullerene isomers, anions (C64(2-) and C64(4-)), metallofullerene Sc2@C64, and Sc2C2@C64

The 3465 classical isomers of C(64) fullerene have been investigated by quantum chemical methods PM3, and the most stable isomers have been refined with HCTH/3-21G//SVWN/STO-3G, B3LYP/6-31G(d)//HCTH/3-21G, and B3LYP/6-311G(d)//B3LYP/6-31G(d) level. C(64)(D(2):0003) with the lowest e(55) (e(55) = 2), the number of pentagon-pentagon fusions, is predicted to be the most stable isomer and it is followed by the C(64)(C(s):0077) and C(64)(C(2):0103) isomers within relative energy of 20.0 kcal/mol. C(64)(D(2):0003) prevails in a wide temperature range according to energy analysis with entropy contribution at B3LYP/6-31G(d) level. The simulated IR spectra and electronic spectra help to identify different fullerene isomers. All the hexagons in the isomers with e(55) = 2 display local aromaticity. The relative stabilities of C(64) isomers change with charging in ionic states. Doping also affects the relative stabilities of fullerene isomers as demonstrated by Sc(2)@C(64)(D(2):0003) and Sc(2)@C(64)(C(s):0077). The bonding of Sc atoms with C(64) elongates the C-C bond of two adjacent pentagons and enhances the local aromaticity of the fullerene cages. Charging, doping, and derativization can be utilized to isolate C(64) isomers through differentiating the electronic and steric effects.     

Two-dimensional hopping motion of encapsulated La atoms in silylated La(2)@C(80)

The (139)La NMR study of the exohedrally functionalized derivatives of La(2)@C(80) metallofullerene, La(2)@C(80)(Ar(2)Si)(2)CH(2) (: Ar = Mes, Mes = mesityl, : Ar = Dep, Dep = 2,6-diethylphenyl), reveal that the two La atoms hop between two sites along the equator of the C(80) cage.     

Synthesis and X-ray or NMR/DFT structure elucidation of twenty-one new trifluoromethyl derivatives of soluble cage isomers of C76, C78, C84, and C90

Adding 1% of the metallic elements cerium, lanthanum, and yttrium to graphite rod electrodes resulted in different amounts of the hollow higher fullerenes (HHFs) C76-D2(1), C78-C2v(2), and C78-C2v(3) in carbon-arc fullerene-containing soots. The reaction of trifluoroiodomethane with these and other soluble HHFs at 520-550 degrees C produced 21 new C76,78,84,90(CF3)n derivatives (n = 6, 8, 10, 12, 14). The reaction with C76-D2(1) produced an abundant isomer of C2-(C76-D2(1))(CF3)10 plus smaller amounts of an isomer of C1-(C76-D2(1))(CF3)6, two isomers of C1-(C76-D2(1))(CF3)8, four isomers of C1-(C76-D2(1))(CF3)10, and one isomer of C2-(C76-D2(1))(CF3)12. The reaction with a mixture of C78-D3(1), C78-C2v(2), and C78-C2v(3) produced the previously reported isomer C1-(C78-C2v(3))(CF3)12 (characterized by X-ray crystallography in this work) and the following new compounds: C2-(C78-C2v(3))(CF3)8; C2-(C78-D3(1))(CF3)10 and C(s)-(C78-C2v(2))(CF3)10 (both characterized by X-ray crystallography in this work); C2-(C78-C2v(2))(CF3)10; and C1-C78(CF3)14 (cage isomer unknown). The reaction of a mixture of soluble higher fullerenes including C84 and C90 produced the new compounds C1-C84(CF3)10 (cage isomer unknown), C1-(C84-C2(11))(CF3)12 (X-ray structure reported recently), D2-(C84-D2(22))(CF3)12, C2-(C84-D2(22))(CF3)12, C1-C84(CF3)14 (cage isomer unknown), C1-(C90-C1(32))(CF3)12, and another isomer of C1-C90(CF3)12 (cage isomer unknown). All compounds were studied by mass spectrometry, (19)F NMR spectroscopy, and DFT calculations. An analysis of the addition patterns of these compounds and three other HHF(X) n compounds with bulky X groups has led to the discovery of the following addition-pattern principle for HHFs: In general, the most pyramidal cage C(sp(2)) atoms in the parent HHF, which form the most electron-rich and therefore the most reactive cage C-C bonds as far as 1,2-additions are concerned, are not the cage C atoms to which bulky substituents are added. Instead, ribbons of edge-sharing p-C6(X)2 hexagons, with X groups on less pyramidal cage C atoms, are formed, and the otherwise "most reactive" fullerene double bonds remain intact.     

Preparation and structural characterization of the Ih and the D5h isomers of the endohedral fullerenes Tm3N@C80: icosahedral C80 cage encapsulation of a trimetallic nitride magnetic cluster with three uncoupled Tm3+ ions

We report an efficient method for the preparation and purification of the Ih and the D5h isomers of Tm3N@C80. Following preparation in a Kratschmer-Huffman electric-arc generator, the Tm3N@C80 isomers were obtained by a chemical separation process followed by a one-stage isomer selective chromatographic high-performance liquid chromatography (HPLC) separation (pyrenyl, 5PYE column). The HPLC chromatographic retention behavior on a pentabromobenzyl (5PBB) column suggests a charge transfer of approximately 6 electrons; [M3N] 6+@C80(6-) and the chromatographic retention mechanisms of the Ih and the D5h isomers of Tm3N@C80 on both 5PBB and 5PYE columns are discussed. Single-crystal X-ray diffraction data demonstrate that the Tm3N cluster has a planar structure but represents a tight fit for trapping the Tm3N cluster inside the I h - and the D 5h -C 80 cages. Specifically, the Tm atoms punch out the cage carbon atoms adjacent to them. The "punched out" effect can be demonstrated by cage radii and pyramidal angles at cage carbon atoms near the Tm atoms. The magnetic susceptibility (chiT) for Tm3N@ Ih -C80 was found to exhibit Curie-Weiss behavior with C = 23.4 emu.K/mol, which is consistent with the calculated value for three uncoupled Tm3+ ions by considering the spin and orbital contributions with no quenching of the orbital angular momentum ( L = 5, S = 1, and J = 6; Ccalcd = 23.3 emu.K/mol). The electrochemical measurements demonstrate that both the Ih and the D5h isomers of Tm3N@C80 have a large electrochemical gap.     

Structural elucidation and regioselective functionalization of an unexplored carbide cluster metallofullerene Sc2C2@C(s)(6)-C82

A Sc(2)C(84) isomer, previously assumed to be Sc(2)@C(84), is unambiguously identified as a new carbide cluster metallofullerene Sc(2)C(2)@C(s)(6)-C(82) using both NMR spectroscopy and X-ray crystallography. The (13)C-nuclei signal of the internal C(2)-unit was observed at 244.4 ppm with a 15% (13)C-enriched sample. Temperature-dependent dynamic motion of the internal Sc(2)C(2) cluster is also revealed with NMR spectrometry. Moreover, the chemical property of Sc(2)C(2)@C(s)(6)-C(82) is investigated for the first time using 3-triphenylmethyl-5-oxazolidinone (1) which provides a 1,3-dipolar reagent under heating. Regarding the low cage symmetry of this endohedral which contains 44 types of nonequivalent cage carbons, it is surprising to find that only one monoadduct isomer is formed in the reaction. Single-crystal X-ray results of the isolated pyrrolidino derivative Sc(2)C(2)@C(s)(6)-C(82)N(CH(2))(2)Trt (2) reveal that the addition takes place at a [6,6]-bond junction, which is far from either of the two Sc atoms. Such a highly regioselective addition pattern can be reasonably interpreted by analyzing the frontier molecular orbitals of the endohedral. Electronic and electrochemical investigations reveal that adduct 2 has a larger highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap than pristine Sc(2)C(2)@C(s)(6)-C(82); accordingly, it is more stable.     

富勒烯C_(36)等电子体C_(34)BN异构体的结构及其相对稳定性理论研究

用半经验的AM1和MNDO方法优化了富勒烯C_(36)的等电子体C_(34)BN所有可能 异构体的构型,分析了各异构体相对稳定性与杂原子取代位置间的关系。另外,比 较了C_(36)碳笼上同位置地取代杂原子形成的C_34BN,C_(34)B_2和C_(34)N_2间的 电子结构,并分析了C_(34)BN最稳定异构体的振动模型。结果表明以C_(36):A (D_(6h))为母体形成的最稳定C_(34)BN异构体对应于碳笼赤道位置六元环中1,4- 取代产物,而以C_(36):B(D_(2d))为母体形成的最稳定C_(34)BN异构体对应于碳笼 近赤道位置的1,2-取代产物.C_(34)BN各异构体的稳定性可能主要由体系的共轭性 质决定。前线轨道能级表明B,N原子取代所得异构体的氧化-还原活性按以下顺序 递增：C_(34)B_2相似文献