共查询到18条相似文献,搜索用时 93 毫秒
1.
2.
时均流激声发动机利用流体诱导声振荡效应把自然界的风和管道气体的动能转化为声场能,可驱动热声制冷机制冷或驱动发电机和换能器发电,为风能利用提供了新思路。在国内首次搭建了正十字型时均流激声发动机实验台,以一台高压风机提供的气流模拟自然风,获得了稳定的驻波声场。在此基础上,揭示了时均流速、平均压力、斯特劳哈尔数等对时均流诱导声振荡的影响。在平均压力为106.19 kPa、时均流速为50.52 m/s、谐振管长度为0.96 m的条件下,该正十字型时均流激声发动机谐振管内的压力振幅达6.20 kPa,约为平均压力的5.80%,为时均流激声发动机驱动发电装置和热声制冷研究奠定了实验基础。 相似文献
3.
4.
5.
6.
7.
热声发动机用加热器的设计与实验验证 总被引:4,自引:0,他引:4
热声发动机利用热声效应将热能转换为机械能,热能由核心部件加热器提供。加热器在热声发动机的能量传递和转化过程中起着举足轻重的作用。针对热声发动机的工作特点,介绍了一种采用时均流对流换热公式进行热声发动机用加热器设计的方法。基于该方法,设计了一种新型热声发动机用电加热器,并应用于自行研制的太型多功能行波热声发动机试验台。设计计算和实验结果表明,该加热器能够充分满足热声发动机的加热要求。本文对以振荡流体为特征的换热器设计具有一定参考价值。 相似文献
8.
9.
10.
为研究热声制冷机内部的非线性过程,发展了一种可考虑管道截面积变化的时域准一维非线性热声模型,其主控方程由可压流基本控制方程经截面平均的数学处理推导得出,数值求解采用具有频散保持特性的高精度计算格式。采用该模型分别针对活塞、扬声器和热声发动机这三种不同驱动源,将驱动源和热声制冷机进行整体求解,模拟了热声制冷板叠两端温度差在气体微团吸放热的循环过程中逐渐增大的整个过程,预测了谐振管内部驻波的非线性畸变。进而研究了平均工作压力、板叠材料、板叠位置以及扬声器形状等参数的选取对于热声制冷机制冷效果的影响。 相似文献
11.
12.
13.
14.
15.
Thermoacoustic engines convert heat energy into high amplitude sound waves, which is used to drive thermoacoustic refrigerator or pulse tube cryocoolers by replacing the mechanical pistons such as compressors. The increasing interest in thermoacoustic technology is of its potentiality of no exotic materials, low cost and high reliability compared to vapor compression refrigeration systems. The experimental setup has been built based on the linear thermoacoustic model and some simple design parameters. The engines produce acoustic energy at the temperature difference of 325–450 K imposed along the stack of the system. This work illustrates the influence of stack parameters such as plate thickness (PT) and plate spacing (PS) with resonator length on the performance of thermoacoustic engine, which are measured in terms of onset temperature difference, resonance frequency and pressure amplitude using air as a working fluid. The results obtained from the experiments are in good agreement with the theoretical results from DeltaEc. 相似文献
16.
17.