Experimental study and analysis on driving wheels’ performance for planetary exploration rovers moving in deformable soil

Planetary rovers are different from conventional terrestrial vehicles in many respects, making it necessary to investigate the terramechanics with a particular focus on them, which is a hot research topic at the budding stage. Predicting the wheel-soil interaction performance from the knowledge of terramechanics is of great importance to the mechanical design/evaluation/optimization, dynamics simulation, soil parameter identification, and control of planetary rovers. In this study, experiments were performed using a single-wheel testbed for wheels with different radii (135 and 157.35 mm), widths (110 and 165 mm), lug heights (0, 5, 10, and 15 mm), numbers of lugs (30, 24, 15, and 8), and lug inclination angles (0°, 5°, 10°, and 20°) under different slip ratios (0, 0.1, 0.2, 0.3, 0.4, 0.6, etc.). The influences of the vertical load (30 N, 80 N, and 150 N), moving velocity (10, 25, 40, and 55 mm/s), and repetitive passing (four times) were also studied. Experimental results shown with figures and tables and are analyzed to evaluate the wheels’ driving performance in deformable soil and to draw conclusions. The driving performance of wheels is analyzed using absolute performance indices such as drawbar pull, driving torque, and wheel sinkage and also using relative indices such as the drawbar pull coefficient, tractive efficiency, and entrance angle. The experimental results and conclusions are useful for optimal wheel design and improvement/verification of wheel-soil interaction mechanics model. The analysis methods used in this paper, such as those considering the relationships among the relative indices, can be referred to for analyzing the performance of wheels of other vehicles.     

Tractive performance analysis of a lugged wheel by open-source 3D DEM software

Open-source software (OSS) is free to use and has accessible source codes, thus, it can be modified by various users. By using OSS, it is possible to easily and economically develop a target program for interaction studies in terramechanics. Yet Another Dynamic Engine (YADE) is an OSS for the 3D discrete element method (DEM), but its applicability to various contact interaction problems in terramechanics is not well-known. To investigate the applicability of YADE in terramechanics, the tractive performance of a lugged wheel was analyzed in this study. An idea of a proportional-integral-differential control model was applied to realize the constant rotation of the wheel in YADE. Our previous experiments on the locomotion of a small lugged wheel on a lunar-soil simulant were analyzed by YADE, and the results were found to be qualitatively similar to the obtained experimental results when considering the effects of the lug height, lug thickness, lug number, and wheel diameter. By applying a quasi-2D analysis with the same soil bin width and wheel width, the computational load of 3D DEM by YADE can be reduced up to 36.8% with similar net traction behavior against the wheel slip in a 3D analysis.     

Performance evaluation of a wire mesh wheel on deformable terrains

Because of the unique lunar environment, a suitable wheel for lunar rover decides the rover’s trafficability on deformable terrains. The wire mesh wheel (hereinafter referred to as WMW) has the advantages of light weight and superior stability, been widely adopted for lunar rovers. But a comprehensive research on performance of WMW on deformable terrains has not been conduct. This paper would provide particular study on a type WMW, including quasi-static pressure-sinkage test and driving performance. A novel pressure-sinkage model for the WMW on deformable soils was presented. In order to investigate the sinkage characteristics of the WMW, tests were performed using a single-wheel testbed for the WMW with different loads and velocities. The effects of load and velocity on sinkage were analyzed, and the relationship between real and apparent sinkage was presented. The research on traction performance of WMW under different slip ratios (0.1–0.6) was also conducted, contrast tests were proceed by using a normal cylindrical wheel (hereinafter referred to as CW). The traction performance of WMW is analyzed using performance indices including wheel sinkage, drawbar pull, driving torque, and tractive efficiency. The experimental results and conclusions are useful for optimal WMW design and improvement/verification of wheel–soil interaction mechanics model.     

Discrete element method analysis of single wheel performance for a small lunar rover on sloped terrain

The purpose of this study is to analyze the performance of a lugged wheel for a lunar micro rover on sloped terrain by a 2D discrete element method (DEM), which was initially developed for horizontal terrain. To confirm the applicability of DEM for sloped terrain locomotion, the relationships of slope angle with slip, wheel sinkage and wheel torque obtained by DEM, were compared with experimental results measured using a slope test bed consisting of a soil bin filled with lunar regolith simulant. Among the lug parameters investigated, a lugged wheel with rim diameter of 250 mm, width of 100 mm, lug height of 10 mm, lug thickness of 5 mm, and total lug number of 18 was found, on average, to perform excellently in terms of metrics, such as slope angle for 20% slip, power number for self-propelled point, power number for 15-degree slope and power number for 20% slip. The estimation of wheel performance over sloped lunar terrain showed an increase in wheel slip, and the possibility exists that the selected lugged wheel will not be able to move up a slope steeper than 20°.     

Shape effects of wheel grousers on traction performance on sandy terrain

This paper presents the effects of different wheel grouser shapes on the traction performance of a grouser wheel traveling on sandy terrain. Grouser wheels are locomotion gears that allow small and lightweight exploration rovers to traverse on the loose sand on extraterrestrial surfaces. Although various grouser shapes have been analyzed by some research groups, a more synthetic and direct comparison of possible grousers is required for practical applications. In this study, we developed a single wheel testbed and experimentally investigated the effects of four grouser shapes (parallel, slanted, V-shaped, and offset V-shaped) on the traction performance of linear movement on flat sand. The wheel slip, sinkage, traction and side force acting on the wheel axle, the wheel driving torque, and the efficiency of each wheel were examined. Thereafter, the effects on the lateral slope traversability of a small and lightweight four-wheeled rover with different grouser shapes were also examined. The traversability experiment demonstrated the vehicle mobility performance in order to contribute to the design optimization of rover systems. These experimental results and their comparisons suggested that, of the shapes studies herein, the slanted shape was the optimal grouser design for use in wheeled rovers on lunar and planetary soil.     

Parametric analysis of lugged wheel performance for a lunar microrover by means of DEM

The purpose of this study was to develop a numerical tool to simulate the performance of lugged wheels designed for a lunar microrover. The performance was analyzed using a Discrete Element Method (DEM) whose accuracy was validated for interactions between lugged wheels and soil. DEM analysis indicated that, on flat horizontal lunar surfaces, wheels with 18 10-mm-high lugs would provide less net traction than would wheels with 36 5-mm-high lugs.     

Theoretical analysis of soil reaction on a lug of the movable lug cage wheel

The measurement of soil reaction forces on a lug of a movable lug cage wheel was carried out in a soil bin. To elucidate the experimental results, a theoretical analysis of soil reaction forces on the lug of the movable lug cage wheel was made by using an analysis of the lug trajectory and a modified theory in soil–vehicle mechanics. The existing theory was modified and adjusted by considering the actual lug trajectory and the soil trench made by the preceding lug. The results showed that the theoretical analysis gave a good representation of the reaction forces measured experimentally. The higher pull and lift forces of the movable lug cage wheel compared with those of the fixed lug wheel was supported by the theoretical analysis. Although the theoretical representation of soil reaction forces should be improved by further works, it is sufficiently accurate to estimate the performance of the movable lug cage wheels by the proposed theory.