Significance of activation energy and Wu's slip features in Cross nanofluid with motile microorganisms

The current article investigates the impact of the bioconvection in an unsteady flow of magnetized Cross nanofluid with gyrotactic microorganisms and activation energy over a linearly stretched configuration. The analysis has been performed by utilizing the realistic Wu's slip boundary and zero mass flux conditions. The effects of nonlinear thermal radiation and the activation energy are also addressed. The governing flow equations are deduced to a dimensionless form by considering suitable transformations which are numerically targeted via a shooting algorithm. The physical visualization of each physical parameter governing the flow problem has been displayed graphically for distribution of velocity, temperature, concentration and motile microorganisms. The numerical treatment for the variation of skin friction coefficient, local Nusselt number, local Sherwood number and motile density number is performed in tabular forms.     

Unsteady radiative nanofluid flow near a vertical heated wavy surface with temperature-dependent viscosity

In the present contribution, a numerical treatment is provided to describe unsteady nanofluid flow near a vertical heated wavy surface. A memorable feature of the present work is the investigation of nanofluid flow associated with thermal radiation that acts as a catalyst for heat transfer rates. Likewise, the effectiveness of variable viscosity is examined as it controls fluid flow as well as heat transfer. It is necessary to study heat and mass transfer for complex geometries because predicting heat and mass transfer for irregular surfaces is a topic of fundamental importance, and irregular surfaces frequently appear in many applications, such as flat-plate solar collectors and flat-plate condensers in refrigerators. A simple coordinate transformation from the wavy surface into a flat one is employed. The non-dimensional boundary layer equations that governing both heat transfer and nanofluid flow phenomena along the wavy surface are solved via a powerful numerical approach called the implicit Chebyshev pseudospectral (ICPS) method with Mathematica code. A comparison graph of the current numerical computation and the published data shows a perfect match. Figures depict the effect of various physical parameters on nanofluid velocities, temperature, salt concentration, nanoparticle concentration, skin friction, Sherwood, nanoparticle Sherwood, and Nusselt numbers. According to the numerical results, increasing the variable viscosity parameter value causes a drop in the local skin friction coefficient value and an increase in the steady-state axial nanofluid velocity profile near the wavy surface. Furthermore, as heat radiation is increased, the local Nusselt number decreases but the nanoparticle Sherwood number increases.     

Axisymmetric Stagnation-Point Flow of Nanofluid over a Stretching Surface

This paper investigates the laminar boundary layer flow of nanofluid induced by a radially stretching sheet. Nanofluid model exhibiting Brownian motion and thermophoresis is used. Series solutions for a reduced system of nonlinear ordinary differential equations are obtained by homotopy analysis method (HAM). Comparative study between the HAM solutions and previously published numerical results shows an excellent agreement. Velocity, temperature and mass fraction are displayed for various values of parameters. The local skin friction coefficient, the local Nusselt number and the local Sherwood number are computed. It is observed that the presence of nanoparticles enhances the thermal conductivity of base fluid. It is found that the convective heat transfer coefficient (Nusselt number) is decreased with an increase in concentration of nanoparticles whereas Sherwood number increases when concentration of nanoparticles in the base fluid is increased.     

Transient thin film flow of nonlinear radiative Maxwell nanofluid over a rotating disk

In this letter, a mathematical model for transient nature thin film flow of Maxwell nanofluid over a rotating disk is studied in the presence of a uniform magnetic field and non-linear thermal radiation. The Brownian motion and thermophoresis features due to nanofluid are captured by adopting the Buongiorno model. The prime emphasize is to explore the temperature field and nanoparticles volume fraction in nanofluid thin film flow. The reduced system of differential equations is solved numerically by finite difference based method namely bvp4c. The numerical outcomes regarding film thickness, Nusselt number, Sherwood number, velocity, temperature, and concentration are revealed for varying estimation of involved physical parameters. It is shown that the film thickness decreases with increasing values of the magnetic number. Further, the impact of thermophoresis and thermal radiation parameters is worthwhile in enhancing the fluid temperature. The Solute concentration is found to decrease with Brownian motion and Schmidt number.     

Boundary layer flow and heat transfer of a nanofluid over a permeable unsteady stretching sheet with viscous dissipation

A numerical study of the boundary layer flow past unsteady stretching surface in nanofluid under the effects of suction and viscous dissipation is investigated. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. A similarity solution is presented, which depends on the unsteadiness parameter A, Eckert number Ec, ζ suction or injection parameter, Prandtl number Pr, Lewis number Le, Brownian motion number Nb, and thermophoresis number Nt. The governing partial differential equations were converted to nonlinear ordinary differential equations by using a suitable similarity transformation, which are solved numerically using the Nactsheim-Swigert shooting technique together with Runge-Kutta six-order iteration scheme. The accuracy of the numerical method is tested by performing various comparisons with the previously published work, and the results are found to be in excellent agreement. Numerical results are presented both in tabular and graphical forms illustrating the effects of these parameters on thermal and nanoparticle volume fraction boundary layers. The thermal boundary layer thickens with a rise in the local temperature as the Brownianmotion, thermophoresis, and convective heating each intensify.     

Thermal radiation and slip effects on MHD stagnation point flow of nanofluid over a stretching sheet

Present model is devoted for the stagnation point flow of nanofluid with magneto-hydrodynamics (MHD) and thermal radiation effects passed over a stretching sheet. Moreover, we have considered the combined effects of velocity and thermal slip. Condition of zero normal flux of nanoparticles at the wall for the stretched flow phenomena is yet to be explored in the literature. Convinced partial differential equations of the model are transformed into the system of coupled nonlinear differential equations and then solved numerically. Graphical results are plotted for velocity, temperature and nanoparticle concentration for various values of emerging parameters. Variation of stream lines, skin friction coefficient, local Nusselt and Sherwood number are displayed along with the effective parameters. Final conclusion has been drawn on the basis of both numerical and graphs results.     

Influence of bioconvection on Maxwell nanofluid flow with the swimming of motile microorganisms over a vertical rotating cylinder

In recent times, bioconvection phenomenon through the use of nanomaterials has encountered significant manufacturing and technical applications. Bioconvection has several applications in bio-micro-system, due to the enhancement in mass transformation and mixing, which are crucial problems in different micro-systems. The aim of current article is to scrutinize the bioconvection phenomenon in 3D Maxwell nanofluid flow with useful characteristics of mixed convection, activation energy, motile microorganisms and solutal boundary conditions. The flow problem focused on the related laws, outcomes in a series of PDEs which have also been delayed in ODE's structure. The numerical method based on a shooting technique is applied to implement a bvp4c solver using the computational software MATLAB. Shooting tactic is utilized to construct the numerical arrangement of subsequent problem. The mathematical division for the local Nusselt number, the motile microorganism's number, and the local Sherwood number is provided when applying different characteristics to the concerned parameters. The hypothetical simulations mentioned may be more successful in enhancing thermal extrusion mechanisms and solar energy structures. The numerical results regarding flow, thermal field, solutal field and concentration of microorganisms are revealed for growing values of interesting parameters. Furthermore, it is inspected that velocity field dwindles with enlarged variation of Maxwell fluid parameter. It is analyzed that radial velocity of Maxwell nanofluid reduces for larger magnitude of mixed convection parameter. Additionally, temperature profile of species upsurges for larger values of thermal stratification Biot number. Moreover, it is inspected that concentration of species decline for higher estimation of Lewis number while enhanced for activation energy parameter. Microorganisms concentration field of Maxwell nanofluid is detected to be an declining function of Peclet number and bioconvection Lewis number. Angorgeous concurrence is obtained when our accomplished numerical results are compared with an already existed magnitudes in limiting condition; hence dependable results are being eliminated.     

MHD Double-Diffusive Carreau Fluid Flow through a Porous Medium with Variable Thermal Conductivity and Suction/Injection

In this article, we consider the effects of double diffusion on magnetohydrodynamics (MHD) Carreau fluid flow through a porous medium along a stretching sheet. Variable thermal conductivity and suction/injection parameter effects are also taken into the consideration. Similarity transformations are utilized to transform the equations governing the Carreau fluid flow model to dimensionless non-linear ordinary differential equations. Maple software is utilized for the numerical solution. These solutions are then presented through graphs. The velocity, concentration, temperature profile, skin friction coefficient, and the Nusselt and Sherwood numbers under the impact of different parameters are studied. The fluid flow is analyzed for both suction and injection cases. From the analysis carried out, it is observed that the velocity profile reduces by increasing the porosity parameter while it enhances both the temperature and concentration profile. The temperature field enhances with increasing the variable thermal conductivity and the Nusselt number exhibits opposite behavior.     

General Solution for Unsteady Natural Convection Flow with Heat and Mass in the Presence of Wall Slip and Ramped Wall Temperature

This work is focused on the effect of heat and mass transfer with unsteady natural convection flow of viscous fluid along with ramped wall temperature under the assumption of the slip wall condition at the boundary. Analytical solutions are obtained by using Laplace transformation to the non-dimensional set of governing equations containing velocity, temperature and concentration. Moreover, the expression for skin-friction is derived by differentiating the analytical solutions of fluid velocity. Numerical tables for Skin-friction, Sherwood number and Nusselt-number are examined. For the physical aspects of the flow, we use various values of involved physical parameters such as Prandtl number (Pr), slip parameter ($\eta$), Schmidt number (Sc), buoyancy ratio parameter ($N$), Sherwood number (Sh), and time $(t)$. Additionally, the general solutions are plotted graphically and a comprehensive theoretical section of numerical discussions is included.     

Hydromagnetic flow of a variable viscosity nanofluid in a rotating permeable channel with hall effects

The flow, heat and mass transfer of water-based nanofluid are examined between two horizontal parallel plates in a rotating system. The effects of Brownian motion, thermophoresis, viscosity and Hall current parameters are considered. The governing partial differential equations are reduced to ordinary differential equations that are then solved numerically using the Runge–Kutta–Fehlberg method. Validation of numerical solution is achieved with an exact solution of primary velocity and found to be in good agreement. Results show that both surfaces experience opposite behavior regarding skin friction, Nusselt and Sherwood numbers in both primary and secondary flows. These physical quantities depend upon dimensionless parameters and numbers.     

Simultaneous features of Wu's slip,nonlinear thermal radiation and activation energy in unsteady bio-convective flow of Maxwell nanofluid configured by a stretching cylinder

This continuation deals with the bioconvection flow of magnetized Maxwell nanofluid over a stretched cylinder in presence of slip effects. The novel features of activation energy and thermal radiation are also encountered to analyze the flow. The higher order slip relations are introduced to inspect the thermal flow problem. The flow model is developed in terms of dimensionless equations via appropriate variables. The numerical simulations are presented with shooting scheme by using MATLAB software. The physical outcomes of interesting parameters are visualized. The observations show that velocity profile reduces with unsteady parameter, curvature constant and second order slip factor. The temperature profile enhanced with first order velocity slip parameter and curvature constant. Moreover, nanofluid concentration reduces with Lewis number and Brownian constant.     

Variable viscosity effects on the flow of MHD hybrid nanofluid containing dust particles over a needle with Hall current—a Xue model exploration

This study scrutinizes the flow of engine oil-based suspended carbon nanotubes magneto-hydrodynamics (MHD) hybrid nanofluid with dust particles over a thin moving needle following the Xue model. The analysis also incorporates the effects of variable viscosity with Hall current. For heat transfer analysis, the effects of the Cattaneo-Christov theory and heat generation/absorption with thermal slip are integrated into the temperature equation. The Tiwari-Das nanofluid model is used to develop the envisioned mathematical model. Using similarity transformation, the governing equations for the flow are translated into ordinary differential equations. The bvp4c method based on Runge-Kutta is used, along with a shooting approach. Graphs are used to examine and depict the consequences of significant parameters on involved profiles. The results revealed that the temperature of the fluid and boundary layer thickness is diminished as the solid volume fraction is raised. Also, with an enhancement in the variable viscosity parameter, the velocity distribution becomes more pronounced. The results are substantiated by assessing them with an available study.     

Double-diffusive radiative magnetic mixed convective slip flow with Biot and Richardson number effects

This paper investigates combined heat and mass transfer by mixed magneto-convective flow of an electrically conducting flow along a moving radiating vertical flat plate with hydrodynamic slip and thermal convective boundary conditions. The governing transport equations are converted into a system of coupled nonlinear ordinary differential equations with prescribed boundary conditions using similarity variables developed by Lie group theory. The transformed nondimensional boundary value problem is then solved numerically with MAPLE13 quadrature. Excellent correlation with previous nonmagnetic, no-slip studies is achieved. Surface shear stress function and local Nusselt number (heat transfer gradient at the wall) are increased with Richardson number, whereas local Sherwood number is found to initially decrease then subsequently increase. The “thermally thick” scenario (Biot number > 0.1) is investigated and increasing Biot number is observed to enhance shear stress function (skin friction), local Nusselt number, and local Sherwood number. Increasing thermal radiation flux increases thermal boundary layer thickness as does increasing the magnetic field effect. Increasing hydrodynamic slip parameter reduces skin friction but enhances local Nusselt and Sherwood numbers. The study has applications in high-temperature polymeric synthesis and magnetic field flow control.     

Three-dimensional flow of Powell–Eyring nanofluid with heat and mass flux boundary conditions

This article investigates the three-dimensional flow of Powell–Eyring nanofluid with thermophoresis and Brownian motion effects. The energy equation is considered in the presence of thermal radiation. The heat and mass flux conditions are taken into account. Mathematical formulation is carried out through the boundary layer approach. The governing partial differential equations are transformed into the nonlinear ordinary differential equations through suitable variables. The resulting nonlinear ordinary differential equations have been solved for the series solutions. Effects of emerging physical parameters on the temperature and nanoparticles concentration are plotted and discussed. Numerical values of local Nusselt and Sherwood numbers are computed and examined.     

Free convection on an inclined plate with variable viscosity and thermal diffusivity

The present numerical analysis addresses free convection flow of a viscous incompressible fluid along an inclined semi-infinite flat plate considering the variation of viscosity and thermal diffusivity with temperature. The governing equations are developed with the corresponding boundary conditions are transformed to non-dimensional form using the appropriate dimensionless quantities. Due to complexity in the transformed governing equations, analytical solution will fail to produce a solution. Hence, most efficient and unconditionally stable implicit finite difference method of Crank-Nicolson scheme has been used to solve the governing equations. Numerical results are obtained for different values of the viscosity, thermal conductivity, inclination angle, Grashof number, and Prandtl number. The overall investigation of the variation of velocity, temperature, shearing stress and Nusselt number are presented graphically. To examine the accuracy of the present approximate results, the present results are compared with the available results.     

Heat and mass transfer analysis of time-dependent tangent hyperbolic nanofluid flow past a wedge

The candid intension of this article is to inspect the heat and mass transfer of a magnetohydrodynamic tangent hyperbolic nanofluid. The nanofluid flow has been assumed to be directed by a wedge on its way. In addition, the collective stimulus of the convective heating mode with thermal radiation is inspected. The governing set of PDEs is rendered into that of the coupled nonlinear ODEs. The resulting ordinary differential equations are then solved by the well known shooting technique for two different cases; the flow over a static wedge and flow over a stretching wedge. The impact of intricate physical parameters on the velocity, temperature and concentration profiles is analyzed graphically. It is noticed that the intensifying values of the generalized Biot number, Brownian motion parameter, thermophoresis parameter and Weissenberg number enhances the dimensionless temperature profile.     

Entropy generation analysis for peristaltically driven flow of hybrid nanofluid

Present study investigates entropy generation analysis for peristaltic motion of hybrid nanofluid. Hybrid nanofluid is composed of iron-oxide and copper nanoparticles suspended in water. Effects of Hall current, Ohmic heating and mixed convection are taken into account. Governing equations are simplified by utilizing lubrication approach. The numerical solutions for resulting system of differential equations are obtained with the aid of Shooting method. Attention has been given to the analysis of hybrid nanoparticles, Hall parameter and Grashoff number on entropy generation, heat transfer rate, velocity profile and pressure gradient. Outcomes reveal that insertion of nanoparticles decreases the temperature of hybrid nanofluid. It is found that increase in Hall parameter reduces the heat transfer rate at wall. Increment in Hall parameter reduces the entropy generation. Velocity and pressure gradient increases by enhancing Grashoff number. It is believed that the present flow model can prove useful in improving the efficiency of similar thermodynamical systems.     

Numerical study of the onset of chemical reaction and heat source on dissipative MHD stagnation point flow of Casson nanofluid over a nonlinear stretching sheet with velocity slip and convective boundary conditions

The magnetohydrodynamic (MHD) stagnation point flow of Casson nanofluid over a nonlinear stretching sheet in the presence of velocity slip and convective boundary condition is examined. In this analysis, various effects such as velocity ratio, viscous dissipation, heat generation/absorption and chemical reaction are accentuated. Possessions of Brownian motion and thermophoresis are also depicted in this study. A uniform magnetic field as well as suction is taken into account. Suitable similarity transformations are availed to convert the governing nonlinear partial differential equations to a system of nonlinear ordinary differential equations and then series solutions are secured using a homotopy analysis method (HAM). Notable accuracy of the present results has been obtained with the earlier results. Impact of distinct parameters on velocity, temperature, concentration, skin friction coefficient,Nusselt number and Sherwood number is canvassed through graphs and tabular forms.     

Physical aspects of magnetized Jeffrey nanomaterial flow with irreversibility analysis

This research presents the applications of entropy generation phenomenon in incompressible flow of Jeffrey nanofluid in the presence of distinct thermal features. The novel aspects of various features, such as Joule heating, porous medium, dissipation features, and radiative mechanism are addressed. In order to improve thermal transportation systems based on nanomaterials, convective boundary conditions are introduced. The thermal viscoelastic nanofluid model is expressed in terms of differential equations. The problem is presented via nonlinear differential equations for which analytical expressions are obtained by using the homotopy analysis method (HAM). The accuracy of solution is ensured. The effective outcomes of all physical parameters associated with the flow model are carefully examined and underlined through various curves. The observations summarized from current analysis reveal that the presence of a permeability parameter offers resistance to the flow. A monotonic decrement in local Nusselt number is noted with Hartmann number and Prandtl number. Moreover, entropy generation and Bejan number increases with radiation parameter and fluid parameter.