Determination of Chlorinated Hydrocarbons Using Sep-Pak Cartridges and Gas Chromatography

Methods are described for the determination of chlorinated hydrocarbons at levels of parts per billion in water and nonaqueous environmental samples by gas chromatography with electron-capture detection. C₁₈, Florisil, alumina N and silica Sep-Pak cartridges were compared to evaluate their cleanup ability. The accuracy of the results of this analytical technique was proved by the analysis of a certified reference material (lake sediment EC-2).     

Trace analysis of chlorobenzenes in water samples using headspace solvent microextraction and gas chromatography/electron capture detection

In the present work, a rapid method for the extraction and determination of chlorobenzenes (CBs) such as monochlorobenzene, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, 1,2,3-trichlorobenzene and 1,2,4-trichlorobenzene in water samples using the headspace solvent microextraction (HSME) and gas chromatography/electron capture detector (ECD) has been described. A microdrop of the dodecane containing monobromobenzene (internal standard) was used as extracting solvent in this investigation. The analytes were extracted by suspending a 2.5 μl extraction drop directly from the tip of a microsyringe fixed above an extraction vial with a septum in a way that the needle passed through the septum and the needle tip appeared above the surface of the solution. After the extraction was finished, the drop was retracted back into the needle and injected directly into a GC column. Optimization of experimental conditions such as nature of the extracting solvent, microdrop and sample temperatures, stirring rate, microdrop and sample volumes, the ionic strength and extraction time were investigated. The optimized conditions were as follows: dodecane as the extracting solvent, the extraction temperature, 45 °C; the sodium chloride concentration, 2 M; the extraction time, 5.0 min; the stirring rate, 500 rpm; the drop volume, 2.5 μl; the sample volume, 7 ml; the microsyringe needle temperature, 0.0 °C. The limit of detection (LOD) ranged from 0.1 μg/l (for 1,3-dichlorobenzene) to 3.0 μg/l (for 1,4-dichlorobenzene) and linear range of 0.5–3.0 μg/l for 1,2-dichlorobenzene, 1,3-dichlorobenzene and from 5.0 to 20.0 μg/l for monochlorobenzene and from 5.0 to 30 μg/l for 1,4-dichlorobenzene. The relative standard deviations (R.S.D.) for most of CBs at the 5 μg/l level were below 10%. The optimized procedure was successfully applied to the extraction and determination of CBs in different water samples.     

Quantitative Analysis of aliphatic aldehydes by headspace SPME sampling and ion-trap GC-MS

Summary A fast and simple headspace SPME sampling method has been developed for quantification of volatile aliphatic aldehydes in sunflower oil. Analysis has been performed by gas chromatography, on a 30m×0.25 mm i.d. ×0.25 μm CP-Wax 52CB column, with mass spectrometric detection. Carryover from the SPME fiber could be eliminated by heating the fiber in the injection port between runs. Response factors of all the compounds were linear for concentrations up to 100 ng μL⁻¹. The slopes of the calibration curves decrease with the amount of saturation of the aldehydes. The average responses for unsaturated aldehydes were twice as high as those for the saturated variety. Responses for dienes were approximately one order of magnitude higher than for saturated aldehydes. Depletion of the analyte was examined by repeated extraction from the same vial. SPME was optimized—after 30 min extraction most components were found to have reached equilibration. The detection limit for the compounds studied varied between 0.1 and 1 ng μL⁻¹. Distribution constants were determined for ten different aldehydes and Henry's constants were calculated for unsaturated aldehydes. There was a definite relationship between the response factors and the amount of saturation of the aldehydes. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

直链醇、烷基苯气相色谱保留指数之比与其正辛醇/水分配系数的相关性

通过研究直链醇、烷基苯等有机物气相色谱保留指数与其正辛醇／水分配系数的关系得出,在极性相异固定相上保留指数之比Im/n与其正辛醇／水分配系数的对数值logkow之间有较好的线性相关性。因而由保留指数能很好的预测分配系数,从而为直链醇、烷基苯分配系数的测定提供了一种简便准确的新方法。     

Novel Activated Carbon Fiber Solid-Phase Microextraction for Determination of Benzyl Chloride and Related Compounds in Water by Gas Chromatography–Mass Spectrometry

An activated carbon fiber (ACF) has been developed for use as an extraction fiber in solid-phase microextraction (SPME) and used to determine benzyl chloride, benzyl dichloride, and benzyl trichloride in water samples by headspace (HS) analysis. Experiments showed that ACF has excellent adsorption capacity. Its well-distributed surface makes desorption swift in a GC–MS injector. Several conditions affecting the ACF-SPME procedure, for example adsorption mode, adsorption time and temperature, and desorption time, were optimized. The optimized HS-ACF-SPME method has acceptable linearity, good precision, and reasonable RSD values for the compounds studied. The ACF is, therefore, a promising alternative for SPME.     

An improved headspace solid-phase microextraction method for the analysis of free-base nicotine in particulate phase of mainstream cigarette smoke

The content of free-base nicotine in cigarette smoke is a controversial subject, partly due to methodological issues. In this investigation, an improved method to measure free-base nicotine in cigarette smoke using headspace solid-phase microextraction (HS-SPME) combined with GC/MS analysis, was developed and validated for this purpose. Cigarette smoke particulate phase (PP) was collected onto a 44 mm glass fiber filter pad. The pad was cut in halves with one half used to determine the concentrations of total nicotine and water. The remaining half was analyzed by HS-SPME for free-base nicotine. The following factors were found to have a significant impact on the responses of free-base nicotine: SPME fiber type, pre-equilibrium time before HS-SPME, extraction time and temperature, PP water content, and the solvent used for the preparation of standards. It was also found that the impact of PP water content on the determination of free-base nicotine from smoke sample could be corrected by a water correction factor calculated based on an experimentally determined reciprocal model. The precision of the method was evaluated with smoke samples of reference cigarettes: Canadian flue-cured monitor and Kentucky reference 2R4F. The RSD values obtained were in the 12.8-16.8% range.     

Determination of aliphatic amines in water by gas chromatography using headspace solvent microextraction

The possibility of applying headspace microextraction into a single drop for the determination of amines in aqueous solutions is demonstrated. A 1 μl drop of benzyl alcohol containing 2-butanone as an internal standard was suspended from the tip of a micro syringe needle over the headspace of stirred sample solutions for extraction. The drop was then injected directly into a GC. The total chromatographic determination was less than 10 min. Optimization of experimental conditions (sampling time, sampling temperature, stirring rate, ionic strength of the solution, concentration of reagents, time of extraction and organic drop volume) with respect to the extraction efficiency were investigated and the linear range and the precision were also examined. Calibration curves yielded good linearity and concentrations down to 2.5 ng ml⁻¹ were detectable with R.S.D. values ranging from 6.0 to 12.0%. Finally, the method was successfully applied to the extraction and determination of amines in tap and river water samples. This system represents an inexpensive, fast, simple and precise sample cleanup and preconcentration method for the determination of volatile organic compounds at trace levels.     

Detection of organophosphate pesticides in human body fluids by headspace solid-phase microextraction (SPME) and capillary gas chromatography with nitrogen-phosphorus detection

Summary Organosphosphate pesticides have been found extractable by headspace solid-phase microextraction (SPME), and the best conditions of their extraction from human whole blood and urine samples have been investigated. The body fluid samples containing nine pesticides (IBP, methyl parathion, fenitrothion, malathion, fenthion, isoxathion, ethion, EPN and phosalone) were heated at 100°C in a septum-capped vial in the presence of various combinations of acid and salts, and SPME fiber was exposed to the headspace of the vial to allow adsorption of the pesticides before capillary gas chromatography (GC) with nitrogen-phosphorus detection. The heating with distilled water/HCl/(NH₄)₂SO₄/NaCl and with distilled water/HCl gave the best results for urine and whole blood, respectively. Recoveries of the nine pesticides were 0.8–10.6% except for phosalone (0.03%) for whole blood, and 3.8–40.2% for urine. The calibration curves for the pesticides showed linearity in the range of 50–400 ng/0.5 mL for whole blood except for malathion (100–400 ng/0.5 mL whole blood) and 7.5–120 ng/0.5 mL for urine except for phosalone (15–120 ng/0.5 mL urine) with detection limits of 2.2–40 ng/0.5 mL for whole blood and 0.8–12 ng/0.5 mL for urine.     

A new disposable ionic liquid based coating for headspace solid-phase microextraction of methyl tert-butyl ether in a gasoline sample followed by gas chromatography-flame ionization detection

A new ionic liquid (IL) based solid-phase microextraction (SPME) fiber was investigated and used for headspace (HS) extraction of methyl tert-butyl ether (MTBE) in a gasoline sample. Using the new IL coated HS-SPME fiber with the combination of gas chromatography-flame ionization detection (GC-FID); sub-to-low μg L⁻¹ concentrations of MTBE were detected. Four different ILs including 1-butyl-3-methylimidazolium tetraflouroborate ([C₄C₁IM] [BF₄]), 1-octyl-3-methylimidazolium tetraflouroborate ([C₈C₁IM] [BF₄]), 1-octyl-3-methylimidazolium hexaflourophosphate ([C₈C₁IM] [PF₆]) and 1-ethyl-3-methylimidazolium ethylsulphate ([C₂C₁IM] [ETSO₄]) were synthesized and examined for extraction, preconcentration and determination of MTBE. It was observed that [C₈C₁IM] [BF₄] showed the highest extraction efficiency and possessed the best extractability for MTBE. The fiber coating takes up the compounds from the sample by absorption in the case of liquid coatings. The calibration graph was linear in a concentration range of 1-120 μg L⁻¹ (R² > 0.994) with the detection limit of 0.09 μg L⁻¹ level. The new IL-coated fiber was applied successfully for the determination of MTBE in a gasoline sample with good recoveries between 90 and 95%.     

固相微萃取-气相色谱联用技术分析饮用水中的氯仿

利用顶空固相微萃取与气相色谱联用技术（ＨＳ－ＳＰＭＥ－ＧＣ）对饮用水中的氯仿进行了分析,并探讨了ＳＰＭＥ萃取头、吸附和热解吸时间对测定结果的影响;聚丙烯酸酯（ＰＡ）萃取头对水中的氯仿有较佳的富集效果,方法具有较好的重现性（ＲＳＤ为５．２３％,ｎ＝８）,线性范围为５～１００μｇ／Ｌ,检出限为３．４５μｇ／Ｌ。     

Determination of partition coefficients by automatic equilibrium headspace gas chromatography by vapor phase calibration

Summary Equilibrium headspace gas chromatography has been applied to the determination of the partition coefficients of volatile compounds in water-air systems. Only techniques that are suited to a fully automatic headspace procedure using the pneumatic headspace sampling-technique have been considered. Particularly simple is the technique of vapor phase calibration —VPC where an external vapor standard is used to calibrate the concentration of the volatile analyte in the headspace, while the concentration in the sample is found from the difference in the total amount in the vial. This technique is described in detail for 2-butanone in water. Finally, the water-air partition coefficients of several selected volatile compounds at different temperatures are listed together with their temperature functions.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Simple extraction of phencyclidine from human body fluids by headspace solid-phase microextraction (SPME)

Summary Phencyclidine (PCP) was found to be extractable by headspace solid-phase microextraction (SPME) from human whole blood and urine. Sample solutions were heated at 90°C in the presence of NaOH and K₂CO₃, and an SPME fiber was exposed in the headspace of a vial for 30 min. Immediately after withdrawal of the fiber, it was analyzed by gas chromatography with surface ionization detection (GC-SID). Recoveries of PCP were approximately 9.3–10.8% and 39.8–47.8% for whole blood and urine samples, respectively. The calibration curve for PCP showed good linearity in the range 2.5–100 ng mL^–1 whole blood and 0.5–100 ng mL^–1 urine. The detection limits were approximately 1.0 ng mL^–1 for whole blood and 0.25 ng mL^–1 for urine.     

固相微萃取-气相色谱/三重四级质谱法测定土壤中氯代苯胺类残留

建立了固相微萃取-气相色谱/三重四级质谱法( SPME-GC/QQQ)同时测定土壤中多种氯代苯胺的方法。优化了多反应监测( MRM)的仪器条件,研究了土壤取样量、加水量、萃取温度、萃取时间对SPME富集效果的影响,确定最佳实验条件为：取8 g土壤样品加入4 mL纯净水中,80℃下萃取40 min。方法的检出限为1~10 pg/g,线性范围为5~1000 pg/g。200 pg/g加标土壤的回收率在96.8%~144.2%,相对标准偏差在13.4%~27.8%(n=5)。方法综合了SPME简便快捷和MRM高选择性的优点,尤其适合于土壤中痕量氯代苯胺类污染物的大量快速筛查分析。     

Diol sep-pak cartridges for enrichment of polychlorobiphenyls and chlorinated pesticides from water samples; determination by GC-ECD

Summary Gas chromatography of polychlorinated biphenyls and chlorinated pesticides in water samples has been performed after adsorption from a 20–200-mL sample on to a cartridge containing 100 mg diol-bonded porous silica. The PCBs are desorbed with 500 μL ethyl acetate, which is concentrated and analysed by gas chromatography with electron-capture detection (GC-ECD). The average recovery of 0.1 ng mL⁻¹ PCB congeners from distilled water and from Aniene river water is≥95% (standard deviation≤2.8). Average recoveries of 25 ng mL⁻¹ Aroclor 1254 from distilled water and from Aniene river water were, respectively, 94.4% and 92.5% (standard deviation 5.8). In the separation of PCB congeners from the chlorinated pesticides only the aldrin (40%) was eluted with the PCBs from the diol Sep-Pak cartridge by aqueous methanol. The method described is simple and reproducible.     

Determination of Tetrachloroethylene and Other Volatile Halogenated Organic Compounds in Oil Wastes by Headspace SPME GC–MS

Oil wastes and slops are complex mixtures of hydrocarbons, which may contain a variety of contaminants including tetrachloroethylene (perchloroethylene, PCE) and other volatile halogenated organic compounds (VHOCs). The analytical determination of PCE at trace levels in petroleum-derived matrices is difficult to carry out in the presence of large amounts of hydrocarbon matrix components. In the following study, we demonstrate that headspace solid-phase microextraction (HS-SPME) combined with GC–MS analysis can be applied for the rapid measurement of PCE concentration in oil samples. The HS-SPME method was developed using liquid paraffin as matrix matching reference material for external and internal calibration and optimisation of experimental parameters. The limit of quantitation was 0.05 mg kg⁻¹, and linearity was established up to 25 mg kg⁻¹. The HS-SPME method was extended to several VHOCs, including trichloroethylene (TCE) in different matrices and was applied to the quantitative analysis of PCE and TCE in real samples.     

Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water,rice, maize and onion

A monolithic ametryn molecular-imprinted polymer based on a simple polymerization method was fabricated for use as new solid-phase microextraction (SPME) fiber, which can be coupled with GC and GC/MS for selective extraction and analysis of triazine herbicides. Methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and ametryn bear role of functional monomer, cross-linker and template, respectively. In the optimized conditions the fabricated fiber showed better molecular recognition abilities for methylthiotriazine herbicides than chloro-triazine herbicides. By use of bi-Langmuir isotherm model the evaluated equilibrium constants for ametryn were 0.01 and 890.69 μM⁻¹, and the numbers of binding sites were 129.98 and 5.82 nmol g⁻¹, respectively. The high extraction efficiency was obtained for ametryn, prometryn, terbutryn, atrazine, simazine, propazine, and cyanazine, yielding the detection limits of 14, 28, 45, 56, 85, 95 and 74 ng mL⁻¹, respectively by GC with flame ionization detection. The reliability of the prepared fiber for extraction of ametryn and other analogues in real samples has been investigated and proved by using spiked samples such as tap water, rice, maize, and onion.     

Headspace solvent microextraction and gas chromatographic determination of some polycyclic aromatic hydrocarbons in water samples

Headspace solvent microextraction (HSME) was shown to be an efficient preconcentration method for extraction of some polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions. A microdrop of 1-butanol (as extracting solvent) containing biphenyl (as internal standard) was used in this investigation. Extraction occurred by suspending a 3 μl drop of 1-butanol from the tip of a microsyringe fixed above the surface of solution in a sealed vial. After extraction for a preset time, the microdrop was retracted back into the syringe and injected directly into a GC injection port. The effects of nature of extracting solvent, microdrop and sample temperatures, stirring rate, microdrop and sample volumes, ionic strength and extraction time on HSME efficiency were investigated and optimized. Finally, the enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with PAHs. The optimized procedure was successfully applied to the extraction and determination of PAHs in different water samples.     

Electropolymerized multiwalled carbon nanotubes/polypyrrole fiber for solid-phase microextraction and its applications in the determination of pyrethroids

A novel solid-phase microextraction (SPME) fiber coated with multiwalled carbon nanotubes/polypyrrole (MWCNTs/Ppy) was prepared with an electrochemical method and used for the extraction of pyrethroids in natural water samples. The results showed that the MWCNTs/Ppy coated fiber had high organic stability, and remarkable acid and alkali resistance. In addition, the MWCNTs/Ppy coated fiber was more effective and superior to commercial PDMS and PDMS/DVD fibers in extracting pyrethroids in natural water samples. Under optimized conditions, the calibration curves were found to be linear from 0.001 to 10 μg mL⁻¹ for five of the six pyrethroids studied, the exception being fenvalerate (which was from 0.005 to 10 μg mL⁻¹), and detection limits were within the range 0.12-0.43 ng mL⁻¹. The recoveries of the pyrethroids spiked in water samples at 10 ng mL⁻¹ ranged from 83 to 112%.     

Analysis of earthy and musty odors in water samples by solid-phase microextraction coupled with gas chromatography/ion trap mass spectrometry

A method for the determination of the earthy and musty odors geosmin, 2-methylisoborneol (2-MIB), 2-isobutyl-3-methoxy pyrazine (IBMP), 2-isopropyl-3-methoxy pyrazine (IPMP) and 2,4,6-trichloroanisole (2,4,6-TCA) in water by headspace solid-phase microextraction (HSSPME) combined with gas chromatography-ion trap mass spectrometry (GC-ITMS) is described. Several parameters of the extraction and desorption procedure were studied and optimized (such as types of fibers, extraction temperature, extraction time, desorption temperature, desorption time, ionic strength and elutropic strength and pH of samples). The method shows good linearity over the concentration range 1-500 ng l⁻¹ and gives detection limits of sub-part per trillion levels for all compounds. Good precision (5.9-9.8%) is obtained using IBMP as internal standard. Finally, the method was successfully applied to analyze earthy and musty odors in tap water and lake water.     

Differentiation of certified brands of origins of Spanish white wines by HS-SPME-GC and chemometrics

A headspace solid-phase microextraction gas-chromatographic (HS-SPME-GC) procedure was used to determine the composition of the volatile fraction of white wine samples from several Spanish certified brands of origin (CBO). The compounds present were previously identified by gas chromatography−mass spectrometry (GC−MS) and quantitative determinations were carried out by GC-FID. Four CBO, Rueda, Ribeiro, Penedés, and Condado de Huelva, were studied. Rueda wines present the highest concentrations of ethyl acetate (55.86−125.27 μg mL⁻¹), isoamyl acetate (0.91−6.72 μg mL⁻¹), hexyl acetate (0.09−0.81 μg g mL⁻¹), and 2-phenethyl acetate (0.14−0.66 μg mL⁻¹). Compounds such as ethyl hexanoate (0.88−2.15 μg mL⁻¹) and ethyl decanoate (0.29−0.96 μg mL⁻¹) appeared in higher concentration in Ribeiro, Rueda, and Penedés samples. According to the results obtained and by applying pattern-recognition procedures differentiation of the considered CBO was attained. Principal-component analysis (PCA), linear discriminant analysis (LDA), and multilayer perceptrons neural networks (MLP-NN) were used as chemometric tools for pattern-recognition studies. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.