高分散隔离活性位催化剂中过渡金属离子结构对丙烷选择氧化反应性能的影响

考察了碱金属K修饰的SiO2负载极低含量过渡金属的高分散隔离活性位系列催化剂(K-M/SiO2(n(K)∶n(M)∶n(Si)=10∶1∶1000),M=V,Cr,Mn,Fe,Co,Ni,Cu,Zn)的丙烷选择氧化催化性能,并运用UV-Raman和CO2-TPD等方法,对该系列催化剂进行了结构和物化性能表征,探讨了催化剂的表面离子结构与催化反应性能之间的关系。 发现钾修饰的SiO2负载过渡金属高分散隔离活性位催化剂上过渡金属离子的组态结构,对丙烷选择氧化反应性能有重要影响。相对稳定的全充满或无d电子的表面离子结构有利于选择氧化反应进行,而存在多种价态的相对不稳定的离子结构有利于深度氧化的进行。 这一离子结构与丙烷选择氧化催化性能的关系与前期乙烷选择氧化规律相似,进一步说明在高分散隔离活性位催化剂中,过渡金属离子的电子组态结构是影响低碳烷烃选择氧化反应性能的最重要因素。     

乙烷氧化脱氢制乙烯反应中制备方法及助剂对镍基催化剂性能的影响

采用不同方法制备了镍基催化剂,并考察了乙烷氧化脱氢制乙烯(ODE)的反应活性,结果表明,在3种不同制备方法的催化剂上,ODE反应的活性及产物选择性存在明显差异,浸渍法制备的催化剂性能最佳.在相同的条件下,以共浸渍法引入CeO2助剂后,N iO/-γA l2O3催化剂上的低温选择氧化活性显著提高,而目的产物C2H4的选择性变化不大.XRD,还原TG和XPS对催化剂进行表征的结果显示:反应的活性物相可能是易于还原的高度分散于催化剂表面的微晶N iO和表面尖晶石N iA l2O4物相;高分散的微晶N iO,类似于纯N iO,有利于ODE反应低温选择氧化生成目的产物C2H4,而易还原的表面尖晶石N iA l2O4物相的存在则可能是在高温下获得高选择氧化活性和选择性的主要原因之一.     

SBA-15介孔分子筛担载的钒基氧化物催化剂对乙烷选择氧化性能

用等体积浸渍法制备了SBA-15担载的钒基(V/SBA-15)和钾修饰的钒基氧化物(K-V/SBA-15)催化剂, 使用氮气吸附、小角X射线衍射(XRD)、紫外-可见漫反射光谱(UV-Vis DRS)和紫外激光拉曼光谱对这些催化剂的结构进行表征, 并评价了这些催化剂对乙烷选择氧化的活性与选择性. 实验结果表明介孔结构SBA-15对乙烷选择氧化的活性优于常规的SiO2; 对于SBA-15担载的V/SBA-15和K-V/SBA-15催化剂, 极低钒担载量(nV:nSi≤0.1:100)时隔离的四配位钒氧化物是乙烷选择氧化生成醛类化合物的活性物种, 高钒担载量(nV:nSi≥2.5:100)时聚合的和微晶态的钒氧化物是乙烷氧化脱氢或深度氧化的活性物种.     

过渡金属修饰对Pt/M-DMSN催化剂丙烷脱氢性能的影响

以两步法制备了一系列过渡金属(M=Fe, Co, Ni, Cu, Zn)修饰的树枝状介孔二氧化硅纳米粒子(DMSN)负载铂(Pt/M-DMSN)催化剂, 并对该系列催化剂进行了丙烷催化脱氢性能评价. X射线衍射(XRD)、 透射电子显微镜(TEM)、 紫外-可见漫反射光谱(UV-Vis DRS)和氢气程序升温还原(H₂-TPR)表征结果表明, 不同过渡金属在DMSN载体表面分散状态不同,且与Pt的相互作用程度不同. 其中Zn-DMSN载体最有利于Pt的分散, 且反应后催化剂上积碳含量最低; Pt/Fe-DMSN催化剂中Pt与载体的相互作用力较强. 通过活性评价结果可知, Pt/Fe-DMSN催化剂表现出最优的丙烷催化脱氢性能, 丙烷初始转化率为44.2%, 反应6 h后丙烷转化率仍可达36.5%.     

H4SiW12O40/TiO2/SiO2复合光催化剂的制备及性能研究

溶胶-凝胶法制备了TiO2/S iO2光催化剂,利用所得TiO2/S iO2光催化剂为基体,浸渍烧结法制备了H4S iW12O40/TiO2/S iO2表面负载修饰型复合光催化剂。TG-DSC、XRD、SEM、BET对催化剂的物化结构进行了表征,分析了TiO2和H4S iW12O40催化活性组分在S iO2载体表面上的键联机理。光催化性能测试是以低浓度酸性品红染料的水溶液为降解目标物,试验结果表明H4S iW12O40的负载修饰可以改进TiO2/S iO2光催化剂的催化活性,酸性品红的降解效率最高可以增加45%。     

NiO/La2O3催化剂上甲烷催化部分氧化制合成气的研究

采用浸渍法制备了一系列不同N i含量的N iO/La2O3催化剂,并利用XRD、BET对催化剂结构进行了表征,采用常压下固定床石英管反应器考察了催化剂对甲烷部分氧化制合成气的反应性能和催化剂的稳定性,其甲烷转化率与反应温度、N i含量以及空速有关.结果表明,N i含量为30%的N iO/La2O3催化剂具有良好的催化活性,800℃时甲烷的转化率为88%,CO选择性可达83%,100 h的连续测试显示N iO/La2O3具有良好的稳定性.     

助剂作用下金属催化剂M(M=Ru, Rh, Pd)对CO化学吸附的理论研究

用Gaussian98程序、HF方法和LANL2DZ基组,以MCOM1^n (M=Ru,Rh,Pd;M1^n =Na^ ,Mg^2 ,K^ ）为模型,探讨在主族金属阳离子助剂M1^n 作用下,过渡金属催化剂M化学吸附CO后对C-O锓的影响及其机理,并进一步推测最终对CO氢化反应产物的影响。结果表明,主族金属阳离子助剂M1^n 以不同方式与MCO相作用及选用不同的助剂作用时,催化剂具有不同的催化活性和选择性,且对C-O键的削弱程度不同,导致生成不同的产物。当主族金属阳离子助剂M1^n 与CO中的O作用时,C-O键被削弱程度比无助剂时大,更有利于生成烃类化合物;当与过渡金属M作用时,C-O键被削弱程度减小,有利于含氧化合物的生成;当助剂与CO以侧基作用时,无助催化活性;当用不同的主族金属阳离子作助剂时,C-O键被削弱程度也不同,得电子能力强的主族金属阳离子助剂有更强的更强的助催化作用。     

高分散锰氧化物催化剂的结构、性能及载体效应

用浸渍法制备了A l2O3,S iO2和MgO等不同性质载体负载的锰氧化物催化剂,考察了其对CO氧化反应的性能,并用XRD、XPS、TPR和XAFS等方法对催化剂进行了详细表征.活性测试结果表明,不同载体负载的样品的活性次序为:MnOx/A l2O3>MnOx/MgO>MnOx/S iO2.XRD结果表明,在S iO2和A l2O3上,负载量为15%的催化剂中没有检测到Mn氧化物的衍射峰,说明Mn物种在载体表面分散性很好,而在MgO上检测到Mg6MnO8物种.XAFS等表征结果表明,A l2O3和S iO2负载的样品中Mn主要以高分散的Mn2O3形式存在,MgO负载的样品中Mn的分散性相对较差,且与载体发生强相互作用.结合XPS和TPR结果,Mn氧化物与载体相互作用强弱的顺序为:MnOx/MgO>MnOx/A l2O3>MnOx/S iO2.负载Mn氧化物催化剂的活性与分散度没有直接对应关系,而是显示了明显的载体效应.     

担载型铑络合物催化异丁烯氢甲酰化反应的研究

将铑络合物担载于磷钨酸改性的载体上制备了一系列新型催化剂。利用异丁烯氢的甲酰化反应考察了磷钨酸改性的各种载体对催化剂的活性和稳定性的影响。结果表明,以磷钨酸改性的S iO2为载体的催化剂在反应中的催化效果最好,当异丁烯5.0 g,V(H2)∶V(CO)=1∶1,p=3.0 MPa时,于377 K反应5 h,ASTY达420.9 h-1;异戊醛的收率为80.37%。     

还原性气氛对丙烷选择氧化催化剂Mo-V-Te-Nb-O结构及活性的影响

系统地研究了还原剂(氯化铵)添加到丙烷选择氧化合成丙烯酸催化剂Mo-V-Te-Nb-O混合氧化物中对催化剂性能的影响.实验结果表明,在制备过程中还原剂的存在明显地影响了所得催化剂晶格氧的活动性,而晶格氧的活动性对Mo-V-Te-Nb-O混合氧化物的催化活性有重要的影响.进一步的研究表明,添加还原剂引起了催化剂形貌和相组成的变化,这些对于丙烯酸的形成有着重要作用.具有较多M1相含量的催化剂在低温(<653 K)时表现出了高丙烯酸选择性,而具有较多M2相含量的催化剂则在高温(>653 K)时更有利于丙烯酸的生成.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.