Suitability of Tedlar gas sampling bags for siloxane quantification in landfill gas

Landfill or digester gas can contain man-made volatile methylsiloxanes (VMS), usually in the range of a few milligrams per normal cubic metre (Nm³). Until now, no standard method for siloxane quantification exists and there is controversy with respect to which sampling procedure is most suitable. This paper presents an analytical and a sampling procedure for the quantification of common VMS in biogas via GC-MS and polyvinyl fluoride (Tedlar^®) bags. Two commercially available Tedlar bag models are studied. One is equipped with a polypropylene valve with integrated septum, the other with a dual port fitting made from stainless steel. Siloxane recovery in landfill gas samples is investigated as a function of storage time, temperature, surface-to-volume ratio and background gas. Recovery was found to depend on the type of fitting employed. The siloxanes sampled in the bag with the polypropylene valve show high and stable recovery, even after more than 30 days. Sufficiently low detection limits below 10 μg Nm⁻³ and good reproducibility can be achieved. The method is therefore well applicable to biogas, greatly facilitating sampling in comparison with other common techniques involving siloxane enrichment using sorption media.     

Complex formation equilibria between Ag(I) and thioureas in n-propanol

Complex formation equilibria between Ag(I) and thiourea or N-alkyl-substituted thioureas have been investigated in n-propanol by potentiometry at 10 °C intervals from 5 to 50 °C. Stepwise formation of tris-coordinated AgL_n (n = 1-3) complexes has been found for the majority of the ligands. ΔH and ΔS values for the complex formation reactions have been evaluated from the dependence of ln β_n on temperature. The alkyl-substituents affect the ligand affinities in different ways in relation with the coordination level n.The reactions are exothermic with few exceptions. Enthalpy favoured complex formation with negative dependence of ΔG on temperature (ΔS > 0) have been found.The enthalpy and entropy changes for the stepwise complex formation equilibria are correlated by two linear compensative relationships with the same isoequilibrium temperature 50-51 °C.     

Acid dissociation constants of uridine-5′-diphosphate compounds determined by phosphorus nuclear magnetic resonance spectroscopy and internal pH referencing

The acid dissociation constant (pK_a) of small, biological molecules is an important physical property used for investigating enzyme mechanisms and inhibitor design. For phosphorus-containing molecules, the ³¹P nuclear magnetic resonance (NMR) chemical shift is sensitive to the local chemical environment, particularly to changes in the electronic state of the molecule. Taking advantage of this property, we present a ³¹P NMR approach that uses inorganic phosphate buffer as an internal pH reference to determine the pK_a values of the imide and second diphosphate of uridine-5′-diphosphate compounds, including the first reported values for UDP-GlcNAc and UDP-S-GlcNAc. New methods for using inorganic phosphate buffer as an internal pH reference, involving mathematical correction factors and careful control of the chemical shift reference sample, are illustrated. A comparison of the newly determined imide and diphosphate pK_a values of UDP, UDP-GlcNAc, and UDP-S-GlcNAc with other nucleotide phosphate and thio-analogs reveals the significance of the monosaccharide and sulfur position on the pK_a values.     

Synthesis,characterization and ethylene polymerization activity of titanium,zirconium and hafnium compounds derivatives from symmetric oxamide

New non-metallocene polymerization catalysts derived from 1,2-bis(3,5-di-tert-butyl-2-hydroxiphenyl)oxamide (L) and transition metals (Ti, Zr, Hf) were synthesized and tested for ethylene polymerization reactions. The syntheses were carried out from various bases and solvents (triethylamine/toluene, NaH/THF and NaOH/methanol). The zirconium compound (5) showed the highest catalytic activity (the polyethylene molecular weight was 98,000 Da) and polydispersity index (1.8–2.0) when n-heptane was used as solvent. In terms of T_m and crystallinity, this catalyst produced the highest density linear polyethylene.     

Application and details of photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones and related compounds

As novel methodology for synthesizing the furan ring, a photoinduced oxidative cyclization of 5-(4′,9′-methanocycloundeca-2′,4′,6′,8′,10′-pentaenylidene)pyrimidine-2,4,6(1,3,5H)-triones (7a-c) and related compounds 9a-c was accomplished to give 5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates (8a-c⁺·BF₄⁻) and related compounds 2a-c⁺·BF₄⁻, respectively. In the photoinduced oxidative cyclization, the molecular oxygen in air is used as oxidant and the reaction proceeds under mild conditions to give desired products without byproducts, and thus, it is interesting from the viewpoint of the green chemistry. On the reactions of the mono-substituted derivatives 7d,e and 9e,f, the selectivity of the photoinduced cyclizations were reversed as compared with those of the DDQ-promoted oxidative cyclizations. By the NMR monitoring of the reactions of 7a and deuterated compound 7a-D₂ under degassed conditions, the details of the reaction pathway were clarified and rationalized on the basis of the MO calculation by the 6-31G^∗ basis set of the MP2 levels as well.     

Improvement of the analysis of the biochemical oxygen demand (BOD) of Mediterranean seawater by seeding control

Biochemical oxygen demand (BOD) is a useful parameter for assessing the biodegradability of dissolved organic matter in water. At the same time, this parameter is used to evaluate the efficiency with which certain processes remove biodegradable natural organic matter (NOM). However, the values of BOD in seawater are very low (around 2 mg O₂ L⁻¹) and the methods used for its analysis are poorly developed. The increasing attention given to seawater desalination in the Mediterranean environment, and related phenomena such as reverse osmosis membrane biofouling, have stimulated interest in seawater BOD close to the Spanish coast. In this study the BOD analysis protocol was refined by introduction of a new step in which a critical quantity of autochthonous microorganisms, measured as adenosine triphosphate, is added. For the samples analyzed, this improvement allowed us to obtain reliable and replicable BOD measurements, standardized with solutions of glucose-glutamic acid and acetate. After 7 days of analysis duration, more than 80% of ultimate BOD is achieved, which in the case of easily biodegradable compounds represents nearly a 60% of the theoretical oxygen demand. BOD₇ obtained from the Mediterranean Sea found to be 2.0 ± 0.3 mg O₂ L⁻¹ but this value decreased with seawater storage time due to the rapid consumption of labile compounds. No significant differences were found between two samples points located on the Spanish coast, since their organic matter content was similar. Finally, the determination of seawater BOD without the use of inoculum may lead to an underestimation of BOD.     

Theoretical study of the thermochemistry and the kinetics of the SFxCl (x = 0-5) series

A systematic thermodynamic and kinetic study of the entire SF_xCl (x = 0-5) series has been carried out. High-level quantum chemical composite methods have been employed to derive enthalpy of formation values from calculated atomization and isodesmic energies. The resulting values for the SCl, SFCl, SF₂Cl(C₁), SF₃Cl(C_s), SF₄Cl(C_s) and SF₅Cl molecules are 28.0, −36.0, −64.2, −134.3, −158.2 and −237.1 kcal mol⁻¹. A comparison with previous experimental and theoretical values is presented. Statistical adiabatic channel model/classical trajectory, SACM/CT, calculations of selected complex-forming and recombination reactions of F and Cl atoms with radicals of the series have been performed between 200 and 500 K. The reported rate coefficients span over the normal range of about 6 × 10⁻¹² and 5 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ expected for this type of barrierless reactions.     

DAB-Cy as an inexpensive and effective ligand for palladium-catalyzed homocoupling reaction of aryl halides

A novel catalytic system of PdCl₂(CH₃CN)₂ with N,N′-dicyclohexyl-1,4-diazabutadiene (DAB-Cy) ligand was successfully used in reductive coupling of aryl halides.     

A mild and efficient chemoselective protection of amines as N-benzyloxycarbonyl derivatives in the presence of La(NO3)3·6H2O under solvent-free conditions

A facile and versatile method for the chemoselective N-benzyloxycarbonylation of amines has been developed by treatment with benzyloxycarbonyl chloride (Cbz-Cl) in the presence of lanthanum(III) nitrate hexahydrate under solvent-free conditions. The method is general for the preparation of N-Cbz derivatives of aliphatic (acyclic and cyclic) and aromatic amines.     

A novel one-pot and efficient procedure for the synthesis of 3H-spiro[isobenzofuran-1,6′-pyrrolo[2,3-d]pyrimidine]-2′,3,4′,5′-tetraones

A novel and practical one-pot procedure is described for the preparation of several new of 3H-spiro[isobenzofuran-1,6′-pyrrolo[2,3-d]pyrimidine]-2′,3,4′,5′-tetraones based on the addition reaction of ninhydrin and 6-aminouracils followed by oxidative cleavage of their corresponding dihydroxyindenopyrrolopyrimidines.     

New di- and triorganotin(IV) derivatives of tyrosinylphenylalanine as models for metal-protein interactions: Synthesis and structural characterization. Crystal structure of Me2Sn(Tyr-Phe) · MeOH

New di- and triorganotin(IV) derivatives of tyrosinylphenylalanine (H₂Tyr-Phe) with general formulae R₂Sn(Tyr-Phe) where R = Me,n-Bu, n-Oct and Ph, and R₃^′Sn(HTyr-Phe) where R^′ = Me and Ph have been synthesized. The bonding and coordination behaviour in these derivatives are discussed on the basis of FT-IR, multinuclear ¹H, ¹³C and ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopic studies. These investigations suggest that dipeptide in R₂Sn(Tyr-Phe) acts as dianionic tridentate coordinating through −C(O)O⁻, -NH₂ and (-CO)N⁻_peptide groups while in case of R^′₃Sn(HTyr-Phe) the ligand acts as monoanionic bidentate coordinating through -C(O)O⁻ and -NH₂, and the polyhedron around tin in R₂Sn(Tyr-Phe) and R^′₃Sn(HTyr-Phe) is a distorted trigonal-bipyramidal. It is further confirmed by the single crystal X-ray structure of Me₂Sn(Tyr-Phe) · MeOH which shows two methyl groups and peptide nitrogen (N⁻_peptide) in the equatorial positions, while the two axial positions are occupied by the carboxylic oxygen (O⁻_carboxyl) and the amino nitrogen (N_amino) atom from the same ligand molecule. One methanol molecule is also present in the asymmetric unit.     

Design of single chain magnets through cyanide-bearing six-coordinate complexes

The design and preparation of stable cyanide-bearing six-coordinate complexes of formula [M^III(L)(CN)_x]^{(x + l − m)−} (M = trivalent transition metal ion and L = polydentate blocking ligand) are summarized here. Their use as ligands towards either fully hydrated metal ions or coordinatively unsaturated preformed species, to afford a wide variety of low-dimensional metal assemblies whose nuclearity, dimensionality and magnetic properties can be tuned, is also reviewed. Special emphasis is put on the appropriate choice of the end-cap ligand L whose denticity determines the number of coordinated cyanide groups in the mononuclear precursors. Among the different new spin topologies obtained through this rational synthetic strategy, ferromagnetically coupled 4,2-ribbon like bimetallic chains which exhibit slow magnetic relaxation and hysteresis effects (chain as magnets) are one of the most appealing and constitute the heart of the present contribution.     

Interactions between Ni ions and tetrapeptides containing (Asp/Lys)HisGly(l/d)His sequence

A series of linear tetrapeptides containing two histidyl residues in positions 2 and 4 with different chirality: DHGH, DHG(d-His), KHGH, KHG(d-His), Ac-DHGH-NH₂, Ac-DHG(d-His)-NH₂, Ac-KHGH-NH₂, and Ac-KHG(d-His)-NH₂ were synthesized, characterized and their binding properties towards Ni²⁺ were investigated. To establish the stoichiometry and the stability of the resulting Ni²⁺ complexes, potentiometric titrations were carried out. The coordination mode of the complexes formed was investigated by performing extensive spectroscopic analyses (UV–Vis, CD) in strict correlation with the potentiometric results. The effects of the nature of the first amino acid (Lys versus Asp) and of the N-terminal amino group acetylation were determined. A careful comparison of the Ni²⁺ coordination abilities of the linear peptides provides a specific insight into the impact of the chirality of the C-terminal histidine residue (His⁴) on the metal binding properties.     

The acetyl CoA synthase paradigm for hybrid bio-organometallics: Quantitative measures for resin-bound Ni-Rh complexes

The active site of Acetyl CoA Synthase utilizes a square planar NiN₂S₂ complex in the form of Ni^II(CGC)²⁻ (CGC = the cysteine-glycine-cysteine tripeptide motif within the protein) to serve as a bidentate sulfur-donor ligand to chelate a second, catalytically active Ni atom responsible for the C-C and C-S coupling reactions for the production of Acetyl CoA. Metalloenzymes, such as this, which house stable catalytic complexes within intricately designed pockets accessible by solvent channels, have inspired design of resin-bound complexes. Through the use of TentaGel S-RAM^® resin beads, the O-Ni(CGC)²⁻ ligand has been synthesized and derivatized with the Rh^I(CO)₂ moiety. The identification of the adduct on these resin beads is afforded by attenuated total reflectance FTIR spectroscopy in the ν(CO) region and compared to solution analogues. The goal of this study is to establish a quantitative measure of the loading of nickel and rhodium on the tripeptide modified resin beads, O-(CGC). The extent of CGC derivatization was determined by Fmoc cleavage of the Fmoc protected O-(CGC). Nickel and rhodium loading were determined by Neutron Activation Analysis. This work provides evidence that the TentaGel S-RAM^® resin beads greatly decrease the air sensitivity of the Ni-Rh complex as compared to the unsupported solution phase analogue. The derivatized beads have also been studied for their ability to withstand a number of physical stresses, i.e., for leaching.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

N,N-Dichlorobis(2,4,6-trichlorophenyl)urea (CC-2) as a new reagent for the synthesis of pyrimidone and pyrimidine derivatives via Biginelli reaction

A simple and efficient method for the synthesis of 3,4-dihydropyrimidin-2-(1H)one and benzo[4,5]imidazo/thioazo[1,2-a]pyrimidine derivatives has been described using N,N′-dichlorobis(2,4,6-trichlorophenyl)urea (CC-2) as a new reagent. This method is found to be efficient and convenient for the synthesis of pyrimidone and pyrimidine derivatives.     

Synthesis and analytical application of a novel tetradentate N(2)O(2) Schiff base as a chromogenic reagent for determination of nickel in some natural food samples

A novel sensitive chromogenic reagent, N,N′-bis(3-methylsalicylidene)-ortho-phenylene diamine (MSOPD), has been synthesized and used in the spectrophotometric determination of nickel. At pH 8, MSOPD can react with nickel ion at room temperature to form a 1:1 complex. The apparent molar absorptivity is 9.5 × 10⁴ l mol⁻¹ cm⁻¹ at 430 nm. Beer's low is obeyed over the range 0-1.0 × 10⁻⁵ M of nickel with a detection limit of 1.36 × 10⁻⁸ M. The relative standard deviation for measurement of 3.41 × 10⁻⁶ M nickel is 1.3% (n = 10). The method has successfully been applied to determination of trace amounts of nickel in some natural food samples.